scholarly journals Wall-to-Wall Forest Mapping Based on Digital Surface Models from Image-Based Point Clouds and a NFI Forest Definition

Forests ◽  
2015 ◽  
Vol 6 (12) ◽  
pp. 4510-4528 ◽  
Author(s):  
Lars Waser ◽  
Christoph Fischer ◽  
Zuyuan Wang ◽  
Christian Ginzler
Keyword(s):  
Point Clouds ◽  
Forest Mapping ◽  
Forest Definition ◽  
Surface Models

scholarly journals Three-Dimensional Reconstruction of Structural Surface Model of Heritage Bridges Using UAV-Based Photogrammetric Point Clouds

2019 ◽  
Vol 11 (10) ◽  
pp. 1204 ◽  
Author(s):  
Yue Pan ◽  
Yiqing Dong ◽  
Dalei Wang ◽  
Airong Chen ◽  
Zhen Ye
Keyword(s):  
Classification Tree ◽  
Three Dimensional ◽  
Point Clouds ◽  
3D Models ◽  
Surface Model ◽  
Reconstruction Method ◽  
3D Point Clouds ◽  
Surface Models ◽  
Structural Surface ◽  
Better Than

Three-dimensional (3D) digital technology is essential to the maintenance and monitoring of cultural heritage sites. In the field of bridge engineering, 3D models generated from point clouds of existing bridges is drawing increasing attention. Currently, the widespread use of the unmanned aerial vehicle (UAV) provides a practical solution for generating 3D point clouds as well as models, which can drastically reduce the manual effort and cost involved. In this study, we present a semi-automated framework for generating structural surface models of heritage bridges. To be specific, we propose to tackle this challenge via a novel top-down method for segmenting main bridge components, combined with rule-based classification, to produce labeled 3D models from UAV photogrammetric point clouds. The point clouds of the heritage bridge are generated from the captured UAV images through the structure-from-motion workflow. A segmentation method is developed based on the supervoxel structure and global graph optimization, which can effectively separate bridge components based on geometric features. Then, recognition by the use of a classification tree and bridge geometry is utilized to recognize different structural elements from the obtained segments. Finally, surface modeling is conducted to generate surface models of the recognized elements. Experiments using two bridges in China demonstrate the potential of the presented structural model reconstruction method using UAV photogrammetry and point cloud processing in 3D digital documentation of heritage bridges. By using given markers, the reconstruction error of point clouds can be as small as 0.4%. Moreover, the precision and recall of segmentation results using testing date are better than 0.8, and a recognition accuracy better than 0.8 is achieved.

scholarly journals Processing Chain for Estimation of Tree Diameter from GNSS-IMU-Based Mobile Laser Scanning Data

2019 ◽  
Vol 11 (6) ◽  
pp. 615 ◽  
Author(s):  
Juraj Čerňava ◽  
Martin Mokroš ◽  
Ján Tuček ◽  
Michal Antal ◽  
Zuzana Slatkovská
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Forest Canopy ◽  
Point Clouds ◽  
Satellite System ◽  
Forest Road ◽  
Forest Mapping ◽  
Fitting Method ◽  
Progressive Technology ◽  
Global Navigation Satellite

Mobile laser scanning (MLS) is a progressive technology that has already demonstrated its ability to provide highly accurate measurements of road networks. Mobile innovation of the laser scanning has also found its use in forest mapping over the last decade. In most cases, existing methods for forest data acquisition using MLS result in misaligned scenes of the forest, scanned from different views appearing in one point cloud. These difficulties are caused mainly by forest canopy blocking the global navigation satellite system (GNSS) signal and limited access to the forest. In this study, we propose an approach to the processing of MLS data of forest scanned from different views with two mobile laser scanners under heavy canopy. Data from two scanners, as part of the mobile mapping system (MMS) Riegl VMX-250, were acquired by scanning from five parallel skid trails that are connected to the forest road. Misaligned scenes of the forest acquired from different views were successfully extracted from the raw MLS point cloud using GNSS time based clustering. At first, point clouds with correctly aligned sets of ground points were generated using this method. The loss of points after the clustering amounted to 33.48%. Extracted point clouds were then reduced to 1.15 m thick horizontal slices, and tree stems were detected. Point clusters from individual stems were grouped based on the diameter and mean GNSS time of the cluster acquisition. Horizontal overlap was calculated for the clusters from individual stems, and sufficiently overlapping clusters were aligned using the OPALS ICP module. An average misalignment of 7.2 mm was observed for the aligned point clusters. A 5-cm thick horizontal slice of the aligned point cloud was used for estimation of the stem diameter at breast height (DBH). DBH was estimated using a simple circle-fitting method with a root-mean-square error of 3.06 cm. The methods presented in this study have the potential to process MLS data acquired under heavy forest canopy with any commercial MMS.

scholarly journals QUALITY ASPECTS OF TRUE ORTHOPHOTO IN URBAN AREAS

2020 ◽  
Vol XLIII-B5-2020 ◽  
pp. 191-198
Author(s):  
W. Ostrowski ◽  
V. D. Gulli ◽  
K. Bakula ◽  
Z. Kurczyński
Keyword(s):  
Image Matching ◽  
Urban Areas ◽  
Quantitative Methods ◽  
Quality Evaluation ◽  
Point Clouds ◽  
Dense Image ◽  
Quality Aspects ◽  
Surface Models ◽  
Recent Developments ◽  
2D Data

Abstract. Orthophotos are one of the most popular photogrammetric products and have been a leading source of up-to-date 2D data of urban areas for years. In the last few years, together with innovations in the area of Dense Image Matching, Digital Surface Models created with dense image matching start to be utilized as the height source during orthorectification. Recently this production workflow of true orthophotos were adopted to production standard in many countries. The aim of the presented research was to evaluate recent developments in the area of automatic true orthophoto generation for urban areas and to define factors which have the main influence on the quality of the final product. Obtained results showed that besides of the image overlap, the main factors which have direct influence on the resulted true orthophoto are the occurrence of shadows and vegetation (trees). One of the outcomes of the presented research was that the quantitative methods develop for quality evaluation of Digital Surface Models and Point Clouds are not directly transferable on the quality evaluation of true orthophotos.

scholarly journals THERMAL 3D MODELS ENHANCEMENT BASED ON INTEGRATION WITH VISIBLE IMAGERY

2019 ◽  
Vol XLII-4/W18 ◽  
pp. 263-269
Author(s):  
F. Dadras Javan ◽  
M. Savadkouhi
Keyword(s):  
High Resolution ◽  
Thermal Imaging ◽  
Point Cloud ◽  
Point Clouds ◽  
3D Models ◽  
Thermal Modelling ◽  
Surface Models ◽  
Geometric Quality ◽  
Imaging Sensors ◽  
Visible Imagery

Abstract. In the last few years, Unmanned Aerial Vehicles (UAVs) are being frequently used to acquire high resolution photogrammetric images and consequently producing Digital Surface Models (DSMs) and orthophotos in a photogrammetric procedure for topography and surface processing applications. Thermal imaging sensors are mostly used for interpretation and monitoring purposes because of lower geometric resolution. But yet, thermal mapping is getting more important in civil applications, as thermal sensors can be used in condition that visible sensors cannot, such as foggy weather and night times which is not possible for visible cameras. But, low geometric quality and resolution of thermal images is a main drawback that 3D thermal modelling are encountered with. This study aims to offer a solution for to fixing mentioned problem and generating a thermal 3D model with higher spatial resolution based on thermal and visible point clouds integration. This integration leads to generate a more accurate thermal point cloud and DEM with more density and resolution which is appropriate for 3D thermal modelling. The main steps of this study are: generating thermal and RGB point clouds separately, registration of them in two course and fine level and finally adding thermal information to RGB high resolution point cloud by interpolation concept. Experimental results are presented in a mesh that has more faces (With a factor of 23) which leads to a higher resolution textured mesh with thermal information.

scholarly journals Can 3D Point Clouds Replace GCPs?

2014 ◽  
Vol II-5 ◽  
pp. 347-354 ◽  
Author(s):  
G. Stavropoulou ◽  
G. Tzovla ◽  
A. Georgopoulos
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Large Scale ◽  
Point Clouds ◽  
Field Work ◽  
Surface Model ◽  
Control Points ◽  
3D Point Clouds ◽  
Surface Models

Over the past decade, large-scale photogrammetric products have been extensively used for the geometric documentation of cultural heritage monuments, as they combine metric information with the qualities of an image document. Additionally, the rising technology of terrestrial laser scanning has enabled the easier and faster production of accurate digital surface models (DSM), which have in turn contributed to the documentation of heavily textured monuments. However, due to the required accuracy of control points, the photogrammetric methods are always applied in combination with surveying measurements and hence are dependent on them. Along this line of thought, this paper explores the possibility of limiting the surveying measurements and the field work necessary for the production of large-scale photogrammetric products and proposes an alternative method on the basis of which the necessary control points instead of being measured with surveying procedures are chosen from a dense and accurate point cloud. Using this point cloud also as a surface model, the only field work necessary is the scanning of the object and image acquisition, which need not be subject to strict planning. To evaluate the proposed method an algorithm and the complementary interface were produced that allow the parallel manipulation of 3D point clouds and images and through which single image procedures take place. The paper concludes by presenting the results of a case study in the ancient temple of Hephaestus in Athens and by providing a set of guidelines for implementing effectively the method.

scholarly journals Urban Feature Extraction from Merged Airborne LiDAR Data and Digital Camera Data

2021 ◽  
Vol 7 (2) ◽  
pp. 57-74
Author(s):  
Lamyaa Gamal EL-Deen Taha ◽  
A. I. Ramzi ◽  
A. Syarawi ◽  
A. Bekheet
Keyword(s):  
Neural Network ◽  
Digital Camera ◽  
Point Clouds ◽  
Airborne Lidar ◽  
Surface Model ◽  
Digital Surface Model ◽  
3D Point Clouds ◽  
Digital Elevation ◽  
Surface Models ◽  
Elevation Model

Until recently, the most highly accurate digital surface models were obtained from airborne lidar. With the development of a new generation of large format digital photogrammetric aerial camera, a fully digital photogrammetric workflow became possible. Digital airborne images are sources for elevation extraction and orthophoto generation. This research concerned with the generation of digital surface models and orthophotos as applications from high-resolution images.  In this research, the following steps were performed. A Benchmark data of LIDAR and digital aerial camera have been used.  Firstly, image orientation, AT have been performed. Then the automatic digital surface model DSM generation has been produced from the digital aerial camera. Thirdly true digital ortho has been generated from the digital aerial camera also orthoimage will be generated using LIDAR digital elevation model (DSM). Leica Photogrammetric Suite (LPS) module of Erdsa Imagine 2014 software was utilized for processing. Then the resulted orthoimages from both techniques were mosaicked. The results show that automatic digital surface model DSM that been produced from digital aerial camera method has very high dense photogrammetric 3D point clouds compared to the LIDAR 3D point clouds. It was found that the true orthoimage produced from the second approach is better than the true orthoimage produced from the first approach. The five approaches were tested for classification of the best-orthorectified image mosaic using subpixel based (neural network) and pixel-based ( minimum distance and maximum likelihood).Multicues were extracted such as texture(entropy-mean),Digital elevation model, Digital surface model ,normalized digital surface model (nDSM) and intensity image. The contributions of the individual cues used in the classification have been evaluated. It was found that the best cue integration is intensity (pan) +nDSM+ entropy followed by intensity (pan) +nDSM+mean then intensity image +mean+ entropy after that DSM )image and two texture measures (mean and entropy) followed by the colour image. The integration with height data increases the accuracy. Also, it was found that the integration with entropy texture increases the accuracy. Resulted in fifteen cases of classification it was found that maximum likelihood classifier is the best followed by minimum distance then neural network classifier. We attribute this to the fine resolution of the digital camera image. Subpixel classifier (neural network) is not suitable for classifying aerial digital camera images. 

scholarly journals Determining the Optimal Number of Ground Control Points for Varying Study Sites through Accuracy Evaluation of Unmanned Aerial System-Based 3D Point Clouds and Digital Surface Models

Drones ◽  
2020 ◽  
Vol 4 (3) ◽  
pp. 49 ◽  
Author(s):  
Jae Jin Yu ◽  
Dong Woo Kim ◽  
Eun Jung Lee ◽  
Seung Woo Son
Keyword(s):  
Image Processing ◽  
Point Clouds ◽  
Optimal Number ◽  
Ground Control ◽  
Control Points ◽  
Widespread Application ◽  
Ground Control Points ◽  
3D Point Clouds ◽  
Surface Models ◽  
Study Sites

The rapid development of drone technologies, such as unmanned aerial systems (UASs) and unmanned aerial vehicles (UAVs), has led to the widespread application of three-dimensional (3D) point clouds and digital surface models (DSMs). Due to the number of UAS technology applications across many fields, studies on the verification of the accuracy of image processing results have increased. In previous studies, the optimal number of ground control points (GCPs) was determined for a specific area of a study site by increasing or decreasing the amount of GCPs. However, these studies were mainly conducted in a single study site, and the results were not compared with those from various study sites. In this study, to determine the optimal number of GCPs for modeling multiple areas, the accuracy of 3D point clouds and DSMs were analyzed in three study sites with different areas according to the number of GCPs. The results showed that the optimal number of GCPs was 12 for small and medium sites (7 and 39 ha) and 18 for the large sites (342 ha) based on the overall accuracy. If these results are used for UAV image processing in the future, accurate modeling will be possible with minimal effort in GCPs.

scholarly journals IMPROVING VERTICAL ACCURACY OF UAV DIGITAL SURFACE MODELS BY INTRODUCING TERRESTRIAL LASER SCANS ON A POINT-CLOUD LEVEL

2020 ◽  
Vol XLIII-B1-2020 ◽  
pp. 457-463
Author(s):  
T. Ivelja ◽  
B. Bechor ◽  
O. Hasan ◽  
S. Miko ◽  
D. Sivan ◽  
...  
Keyword(s):  
Laser Scanning ◽  
Point Clouds ◽  
Scene Reconstruction ◽  
Control Points ◽  
Ground Control Points ◽  
Surface Models ◽  
Aerial Vehicle ◽  
Vertical Accuracy ◽  
3D Scene ◽  
3D Scene Reconstruction

Abstract. Digital Surface Models (DSM) generated by image-based scene reconstruction from Unmanned Aerial Vehicle (UAV) and Terrestrial Laser Scanning (TLS)point clouds are highly distinguished in terms of resolution and accuracy. This leads to a situation where users have to choose the most beneficial product to fulfill their needs. In the current study, these techniques no longer compete but complement each other. Experiments were implemented to verify the improvement of vertical accuracy by introducing different amounts and configurations of Terrestrial Laser scans in the photogrammetric Structure from Motion (SfM) workflow for high-resolution 3D-scene reconstruction. Results show that it is possible to significantly improve (∼ 49% ) the vertical accuracy of DSMs by introducing a TLS point clouds. However, accuracy improvement is highly associated with the number of introduced Ground Control Points (GCP) in the SfM workflow procedure.

scholarly journals Unmanned Aerial Vehicle Surveying For Monitoring Road Construction Earthworks

2019 ◽  
Vol 14 (1) ◽  
pp. 1-17 ◽  
Author(s):  
Kalev Julge ◽  
Artu Ellmann ◽  
Romet Köök
Keyword(s):  
Unmanned Aerial Vehicle ◽  
Road Construction ◽  
Point Clouds ◽  
Satellite System ◽  
Ground Control Points ◽  
Surface Models ◽  
Aerial Vehicle ◽  
Global Navigation Satellite ◽  
Sand And Gravel ◽  
The Impact

Unmanned aerial vehicle photogrammetry is a surveying technique that enables generating point clouds, 3D surface models and orthophoto mosaics. These are based on photos captured with a camera placed on an unmanned aerial vehicle. Within the framework of this research, unmanned aerial vehicle photogrammetry surveys were carried out over a sand and gravel embankment with the aim of assessing the vertical accuracy of the derived surface models. Flight altitudes, ground control points and cameras were varied, and the impact of various factors on the results was monitored. In addition, the traditional real-time-kinematic Global Navigation Satellite System surveys were conducted for verifications. Surface models acquired by different methods were used to calculate volumes and compare the results with requirements set by Estonian Road Administration. It was found that with proper measuring techniques an accuracy of 5.7 cm for the heights were achieved.

Sign in / Sign up

Export Citation Format

Share Document