scholarly journals Reaction of Ion Exchange Resins with Fenton’s Reagent

Environments ◽  
2018 ◽  
Vol 5 (11) ◽  
pp. 123 ◽  
Author(s):  
Leandro de Araujo ◽  
Júlio Marumo
Keyword(s):  
Ion Exchange ◽  
Catalyst Concentration ◽  
Setting Time ◽  
Ion Exchange Resins ◽  
Experimental Conditions ◽  
Final Volume ◽  
Different Temperatures ◽  
Axial Compressive Strength ◽  
Exchange Resins ◽  
Two Parameters

One of the most common treatment methods for spent ion exchange resins is their immobilization in cement, which reduces the release of radionuclides into the environment. Although this method is efficient, it considerably increases the final volume of the waste due to its low incorporation capacity. This work aims to evaluate the degradation of ion exchange resins by the Fenton process (H2O2/Fe2+). The resin evaluated was a mixture of cationic and anionic resins, both non-radioactive. The reactions were conducted by varying the catalyst concentration (25, 50, 100, and 150 mmol L−1) and the volume of hydrogen peroxide. Three different temperatures were evaluated by varying the flow of reactants, which were 50, 60, and 70 °C. Cement specimens were prepared from the treated solutions and two parameters were assessed—namely, final setting time and axial compressive strength. The results showed that the experimental conditions were suitable to dissolve the resins, and the Fe3+ produced as precipitate during the experiments increased the resistance of the final product. The immobilized product complied with the limits established by regulation.

Glycerol etherification over acid ion exchange resins: effect of catalyst concentration and reusability

2013 ◽  
pp. n/a-n/a ◽  
Author(s):  
María Pilar Pico ◽  
Juana María Rosas ◽  
Sergio Rodríguez ◽  
Aurora Santos ◽  
Arturo Romero
Keyword(s):  
Ion Exchange ◽  
Catalyst Concentration ◽  
Ion Exchange Resins ◽  
Exchange Resins

Remineralization Potential of a New Toothpaste Formulation: An In-Vitro Study

2004 ◽  
Vol 5 (1) ◽  
pp. 18-30 ◽  
Author(s):  
Carlos A. Muñoz ◽  
Anna Torrado ◽  
Manuel Valiente ◽  
Wu Zhang ◽  
Yiming Li
Keyword(s):  
Ion Exchange ◽  
In Vitro Study ◽  
Ion Exchange Resin ◽  
Ion Exchange Resins ◽  
Experimental Conditions ◽  
Human Enamel ◽  
Before And After ◽  
Ph Cycling ◽  
Exchange Resins

Abstract The aim of the present study was to determine the ability of a dentifrice containing a mixture of ion-exchange resins (named NMTD), which supplies calcium, fluoride, phosphate, and zinc ions, to promote remineralization and/or inhibit demineralization of dental human enamel in a pH cycling model in vitro. A fluoride toothpaste was used as the control. The enamel specimens were tested for microhardness before and after 10 days and 16 days of the demineralizing and remineralizing treatments. The results of this study showed both dentifrices were effective in limiting in vitro enamel demineralization although the effects were not significantly different from each other. Inclusion of calcium and phosphate ion-exchange resins in the dentifrice containing a fluoride ion-exchange resin maintained a similar net outcome of the conventional dentifrice in the demineralization/ remineralization process under the experimental conditions employed. Citation Torrado A, Valiente M, Zhang W, et. al. Remineralization Potential of a New Toothpaste Formulation: An In-Vitro Study. J Contemp Dent Pract 2004 February;(5)1:018-030.

Solidification of Microbiologically Treated Ion-Exchange Resins Using Portland Cement-Based Systems

1992 ◽  
Vol 294 ◽  
Author(s):  
Ari Ipatti
Keyword(s):  
Ion Exchange ◽  
Portland Cement ◽  
Nuclear Power ◽  
Setting Time ◽  
Waste Product ◽  
Ion Exchange Resins ◽  
Portland Cements ◽  
Solidified Waste ◽  
Exchange Resins ◽  
Microbiological Treatment

ABSTRACTPretreated inactive ion exchange resins from the Loviisa nuclear power plant (NPP) were first reduced to one tenth of the original volume through microbiological treatment. During the process, the granular ion exchange resins were decomposed to result in dregs, which were solidified with two types of Portland cements. The objective of the present experiments was to investigate whether commercial cements are suitable solidification agents for this kind of waste.A total of ten mixtures were pretested for their rheological and setting properties. On the basis of the pretest results, four additional mixtures were chosen and tested for the spread value, density, air content, setting time and bleeding of the fresh waste product and for the dimensional stability and compressive strength of the hardened waste product. The cementing systems incorporated in the tests were ASTM type V Portland cement and ASTM type P Portland Composite cements. The dregs used in the tests were taken from a Pilot-Plant experiment at the Loviisa NPP and contained 2 wt-% solids.The test results were promising in showing that microbiological dregs can very easily be solidified with Portland cements to form a high-quality waste product. Thus, the microbiological treatment of spent ion exchange resins will drastically decrease the amount of solidified waste to be disposed of at the Loviisa NPP.

scholarly journals Radioisotopic Tracer Technique for Characterization of Nuclear and Non-Nuclear Grade Ion Exchange Resins Tulsion A-23 and Indion-810

2013 ◽  
Vol 11 ◽  
pp. 1-5
Author(s):  
Pravin U. Singare
Keyword(s):  
Ion Exchange ◽  
Reaction Rate ◽  
Nuclear Grade ◽  
Ion Exchange Resins ◽  
Specific Reaction Rate ◽  
Experimental Conditions ◽  
Specific Reaction ◽  
Bromide Ion ◽  
Exchange Resins

In the present paper 82Br radioactive tracer isotopes was used for characterization of nuclear and non-nuclear grade ion exchange resins Tulsion A-23 and Indion-810 respectively. The bromide ion-isotopic exchange reactions were performed by equilibrating 1.000 g of conditioned resins in bromide form with labeled bromide ion solution of different concentrations ranging from 0.001 M to 0.004 M, in the temperature range of 30.0 °C to 45.0 °C. The resins were characterized by comparing the values of specific reaction rate (min-1), amount of bromide ion exchanged (mmol) and percentage of bromide ions exchanged under identical experimental conditions. It was observed that the above values decrease with rise in temperature and increases with increase in concentration of labeled bromide ion solution. From the experimental values of specific reaction rate, amount and percentage of bromide ions exchanged, it was observed that Tulsion A-23 resins are superior to Indion-810 resins under identical experimental conditions.

scholarly journals POTENCIALIDADE DE USO DA RESINA AMBERLITE IR 120 NO TRATAMENTO DE RESÍDUOS QUÍMICOS CONTENDO ESPÉCIES IÔNICAS COM CR2O72-, FE3+ E MNO4-

2014 ◽  
Vol 39 (1) ◽  
pp. 12
Author(s):  
Fernanda Da Silva Nogueira ◽  
Aparecida Maria Simões Mimura ◽  
Júlio César José Da Silva ◽  
Rafael Arromba de Sousa
Keyword(s):  
Ion Exchange ◽  
Exchange Resin ◽  
Ion Exchange Resin ◽  
Ion Exchange Resins ◽  
Chemistry Department ◽  
Experimental Conditions ◽  
Cationic Resin ◽  
Exchange Resins ◽  
Potential Use ◽  
Acid Waste

Ion exchange resins have been widely used as an option for wastewater treatments and are effective in reducing the concentration of residual metals. In this context, the aim of this study was to evaluate the potential use of an ion exchange resin for the treatment of an acid waste regularly produced at the Chemistry Department in the Federal University of Juiz de Fora. Employing optimized experimental conditions the studied method allowed to remove, significantly the Fe3+, Cr2O72- and MnO4- content, using only the cationic resin, AMBERLITE IR 120®. In addition, desorption of these species was also studied, in which the metals content could be concentrated into a volume 70% smaller than the ordinary waste volume. Besides, after that desorption the resin can be reused and the method showed to be adequate for routine uses.

Embedding Procedure for Water Swollen Samples

1970 ◽  
Vol 28 ◽  
pp. 504-505
Author(s):  
Ann M. Thomas ◽  
Virginia Shemeley
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Ion Exchange ◽  
Structural Changes ◽  
Cross Linking ◽  
Ion Exchange Resins ◽  
Transmission Electron ◽  
First Pass ◽  
Exchange Resins

Those samples which swell rapidly when exposed to water are, at best, difficult to section for transmission electron microscopy. Some materials literally burst out of the embedding block with the first pass by the knife, and even the most rapid cutting cycle produces sections of limited value. Many ion exchange resins swell in water; some undergo irreversible structural changes when dried. We developed our embedding procedure to handle this type of sample, but it should be applicable to many materials that present similar sectioning difficulties.The purpose of our embedding procedure is to build up a cross-linking network throughout the sample, while it is in a water swollen state. Our procedure was suggested to us by the work of Rosenberg, where he mentioned the formation of a tridimensional structure by the polymerization of the GMA biproduct, triglycol dimethacrylate.

Applications of Ion Exchange Resin in Oral Drug Delivery Systems

2017 ◽  
Vol 7 (03) ◽  
Author(s):  
Kathpalia Harsha ◽  
Das Sukanya
Keyword(s):  
Drug Delivery ◽  
Ion Exchange ◽  
Drug Delivery Systems ◽  
Oral Drug Delivery ◽  
Physical Stability ◽  
Delivery Systems ◽  
Oral Drug ◽  
Ion Exchange Resins ◽  
Exchange Resins ◽  
Oral Drug Delivery Systems

Ion Exchange Resins (IER) are insoluble polymers having styrene divinylbenzene copolymer backbone that contain acidic or basic functional groups and have the ability to exchange counter ions with the surrounding aqueous solutions. From the past many years they have been widely used for purification and softening of water and in chromatographic columns, however recently their use in pharmaceutical industry has gained considerable importance. Due to the physical stability and inert nature of the resins, they can be used as a versatile vehicle to design several modified release dosage forms The ionizable drug is complexed with the resin owing to the property of ion exchange. This resin complex dissociatesin vivo to release the drug. Based on the dissociation strength of the drug from the drug resin complex, various release patterns can be achieved. Many formulation glitches can be circumvented using ion exchange resins such as bitter taste and deliquescence. These resins also aid in enhancing disintegrationand stability of formulation. This review focuses on different types of ion exchange resins, their preparation methods, chemistry, properties, incompatibilities and their application in various oral drug delivery systems as well as highlighting their use as therapeutic agents.

THE DISPOSAL OF USED ION EXCHANGE RESINS

2004 ◽  
Vol 3 (3) ◽  
pp. 447-455
Author(s):  
Viky Dicu ◽  
Carmen Iesan ◽  
Mihai Chirica ◽  
Satish Bapat
Keyword(s):  
Ion Exchange ◽  
Ion Exchange Resins ◽  
Exchange Resins

FTIR ANALYSIS OF ION EXCHANGE RESINS WITH APPLICATION IN PERMANENT HARD WATER SOFTENING

2014 ◽  
Vol 13 (9) ◽  
pp. 2145-2152 ◽  
Author(s):  
Liliana Lazar ◽  
Laura Bulgariu ◽  
Bogdan Bandrabur ◽  
Ramona-Elena Tataru-Farmus ◽  
Mioara Drobota ◽  
...  
Keyword(s):  
Ion Exchange ◽  
Hard Water ◽  
Ion Exchange Resins ◽  
Ftir Analysis ◽  
Water Softening ◽  
Exchange Resins
Sign in / Sign up

Export Citation Format

Share Document