scholarly journals Characterization of TSO and DSO Grid System Services and TSO-DSO Basic Coordination Mechanisms in the Current Decarbonization Context

Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4451
Author(s):  
Ricardo Silva ◽  
Everton Alves ◽  
Ricardo Ferreira ◽  
José Villar ◽  
Clara Gouveia

Power systems rely on ancillary services (ASs) to ensure system security and stability. Until recently, only the conventional power generation resources connected to the transmission grids were allowed to provide these ASs managed by the transmission system operators (TSOs), while distribution system operators (DSOs) had a more passive role, focused on guaranteeing distribution capacity to bring power to final consumers with enough quality. Now, with the decarbonization, digitalization and decentralization processes of the electrical networks, the growing integration of distributed energy resources (DERs) in distribution grids are displacing conventional generation and increasing the complexity of distribution networks’ operation, requiring the implementation of new active and coordinated management strategies between TSOs and DSOs. In this context, DERs are becoming potential new sources of flexibility for both TSOs and DSOs in helping to manage the power system. This paper proposes a systematic characterization of both traditional and potentially new ASs for TSOs, and newly expected DSO local system services to support the new distribution grid operation paradigm, reviewing, in addition, the main TSO-DSO coordination mechanisms.

2018 ◽  
Vol 61 ◽  
pp. 00012
Author(s):  
Guillermo Domínguez-López ◽  
Pol Paradell-Solà ◽  
José Luis Domínguez-García ◽  
Jacob Rodríguez-Rivero ◽  
Jorge Sánchez-Cifuentes

Future power systems with high penetration of distributed energy resources (DER) and information and communication technology (ICT) will allow increasing the controllability and observability of the grid. However, new challenges for low voltage distribution networks has arisen where the increasing DER is mainly photovoltaic (PV) installed on the roofs of buildings. This type of generation is variable and generates disturbances in the network. Islands are ideal to experience and install new technologies since are weak grids and the penetration of PV will lead to bidirectional power flows at distribution level, thus a smart control will be required. This article aims to present and innovative tool for the distribution system operators (DSOs) to monitor and manage grid operation. In near future, both DER and client’s flexibility will increase. New monitoring and control tools for DSOs are essential. Furthermore, the grid operation optimization is needed to accommodate the expected DER installations and the active participation of consumers’ flexibility services in markets ensuring system efficiency. This tool is tested on “La Graciosa” grid, one of the Canary Islands, to show its benefit. The grid studied includes a hybrid energy storage system (HESS), PV generators, controllable/uncontrollable loads and equipment to monitor power flows.


Energies ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 7849
Author(s):  
Ferréol Binot ◽  
Trung Dung Le ◽  
Marc Petit

In response to the climate emergency, new uses are plugged to low voltage (LV) electrical networks. The development of self-consumption complicate the LV grid operation, and force distribution system operators (DSOs) to better model and characterize their networks. DSOs mainly use a three-conductor model (3 CM) to compute power flows, and consider error margins of 2% for voltage profiles to reflect their model inaccuracy. The characteristics of the future LV grids call into question these margins, and the models used. In this paper, a four-conductor model (4 CM), and an additional model named 4 CMext, that considers external parameters (i.e., cable temperature, ground electrical resistivity, and value/number of the earthing resistances) are proposed. The best model for cable characterization and voltage profile calculation is chosen; the 4 CMext is more adapted for the characterization, and corresponds with the finite element model, with an error margin of 4%, experimental measurements of 15%, and French cable manufacturer data of 0.5%. For the voltage profile, the 4 CMext provides a more detailed view of the critical cases that could lead to a violation of the limits of the EN 50160 standard than 3 CM and 4 CM. Violations of high or low voltages are underestimated by two to six times by the 3 CM and 4 CM. Not considering external parameters can lead to a voltage profile error of above 3%. In this paper, we recommend that DSOs use the 4 CMext to represent LV networks, which would allow LV networks to be used closer to their physical limits, and avoid or postpone network reinforcements.


Author(s):  
Reza Tajik

Nowadays, the utilization of renewable energy resources in distribution systems (DSs) has been rapidly increased. Since distribution generation (DG) use renewable resources (i.e., biomass, wind and solar) are emerging as proper solutions for electricity generation. Regarding the tremendous deployment of DG, common distribution networks are undergoing a transition to DSs, and the common planning methods have become traditional in the high penetration level. Indeed, in conformity with the voltage violation challenge of these resources, this problem must be dealt with too. So, due to the high penetration of DG resources and nonlinear nature of most industrial loads, the planning of DG installation has become an important issue in power systems. The goal of this paper is to determine the planning of DG in distribution systems through smart grid to minimize losses and control grid factors. In this regard, the present work intending to propose a suitable method for the planning of DSs, the key properties of DS planning problem are evaluated from the various aspects, such as the allocation of DGs, and planning, and high-level uncertainties. Also depending on these analyses, this universal literature review addressed the updated study associated with DS planning. In this work, an operational design has been prepared for a higher performance of the power distribution system in the presence of DG. Artificial neural network (ANN) has been used as a method for voltage monitoring and generation output optimization. The findings of the study show that the proposed method can be utilized as a technique to improve the process of the distribution system under various penetration levels and in the presence of DG. Also, the findings revealed that the optimal use of ANN method leads to more controllable and apparent DS.


2016 ◽  
Vol 2016 ◽  
pp. 1-17 ◽  
Author(s):  
A. Elsherif ◽  
T. Fetouh ◽  
H. Shaaban

In recent years a multitude of events have created a new environment for the electric power infrastructure. The presence of small-scale generation near load spots is becoming common especially with the advent of renewable energy sources such as wind power energy. This type of generation is known as distributed generation (DG). The expansion of the distributed generators- (DGs-) based wind energy raises constraints on the distribution networks operation and power quality issues: voltage sag, voltage swell, voltage interruption, harmonic contents, flickering, frequency deviation, unbalance, and so forth. Consequently, the public distribution network conception and connection studies evolve in order to keep the distribution system operating in optimal conditions. In this paper, a comprehensive power quality investigation of a distribution system with embedded wind turbines has been carried out. This investigation is carried out in a comparison aspect between the conventional synchronous generators, as DGs are widely in use at present, and the different wind turbines technologies, which represent the foresightedness of the DGs. The obtained results are discussed with the IEC 61400-21 standard for testing and assessing power quality characteristics of grid-connected wind energy and the IEEE 1547-2003 standard for interconnecting distributed resources with electric power systems.


Energies ◽  
2018 ◽  
Vol 11 (5) ◽  
pp. 1156 ◽  
Author(s):  
Nikoleta Andreadou ◽  
Evangelos Kotsakis ◽  
Marcelo Masera

The modernization of the distribution grid requires a huge amount of data to be transmitted and handled by the network. The deployment of Advanced Metering Infrastructure systems results in an increased traffic generated by smart meters. In this work, we examine the smart meter traffic that needs to be accommodated by a real distribution system. Parameters such as the message size and the message transmission frequency are examined and their effect on traffic is showed. Limitations of the system are presented, such as the buffer capacity needs and the maximum message size that can be communicated. For this scope, we have used the parameters of a real distribution network, based on a survey at which the European Distribution System Operators (DSOs) have participated. For the smart meter traffic, we have used two popular specifications, namely the G3-PLC–“G3 Power Line communication” and PRIME–acronym for “PoweRline Intelligent Metering Evolution”, to simulate the characteristics of a system that is widely used in practice. The results can be an insight for further development of the Information and Communication Technology (ICT) systems that control and monitor the Low Voltage (LV) distribution grid. The paper presents an analysis towards identifying the needs of distribution networks with respect to telecommunication data as well as the main parameters that can affect the Inverse Fast Fourier Transform (IFFT) system performance. Identifying such parameters is consequently beneficial to designing more efficient ICT systems for Advanced Metering Infrastructure.


Author(s):  
N. Md. Saad ◽  
M. Z. Sujod ◽  
Lee Hui Ming ◽  
M. F. Abas ◽  
M. S. Jadin ◽  
...  

As the rapid development of photovoltaic (PV) technology in recent years with the growth of electricity demand, integration of photovoltaic distributed generation (PVDG) to the distribution system is emerging to fulfil the demand. There are benefits and drawbacks to the distribution system due to the penetration of PVDG. This paper discussed and investigated the impacts of PVDG location and size on distribution power systems. The medium voltage distribution network is connected to the grid with the load being supplied by PVDG. Load flow and short circuit calculation are analyzed by using DigSILENT Power Factory Software. Comparisons have been made between the typical distribution system and the distribution system with the penetration of PVDG. Impacts in which PVDG location and size integrates with distribution system are investigated with the results given from the load flow and short circuit analysis. The results indicate positive impacts on the system interconnected with PVDG such as improving voltage profile, reducing power losses, releasing transmission and distribution grid capacity. It also shows that optimal locations and sizes of DGs are needed to minimize the system’s power losses. On the other hand, it shows that PVDG interconnection to the system can cause reverse power flow at improper DG size and location and increases short circuit level.


Energies ◽  
2020 ◽  
Vol 13 (7) ◽  
pp. 1802 ◽  
Author(s):  
Chong Cao ◽  
Zhouquan Wu ◽  
Bo Chen

In this paper, a vehicle–grid integration (VGI) control strategy for radial power distribution networks is presented. The control schemes are designed at both microgrid level and distribution level. At the VGI microgrid level, the available power capacity for electric vehicle (EV) charging is optimally allocated for charging electric vehicles to meet charging requirements. At the distribution grid level, a distributed voltage compensation algorithm is designed to recover voltage violation when it happens at a distribution node. The voltage compensation is achieved through a negotiation between the grid-level agent and VGI microgrid agents using the alternating direction method of multipliers. In each negotiation round, individual agents pursue their own objectives. The computation can be carried out in parallel for each agent. The presented VGI control schemes are simulated and verified in a modified IEEE 37 bus distribution system. The simulation results are presented to show the effectiveness of the VGI control algorithms and the effect of algorithm parameters on the convergence of agent negotiation.


2019 ◽  
Vol 11 (2) ◽  
pp. 301 ◽  
Author(s):  
Jingpeng Yue ◽  
Zhijian Hu ◽  
Amjad Anvari-Moghaddam ◽  
Josep M. Guerrero

In order to coordinate the economic desire of microgrid (MG) owners and the stability operation requirement of the distribution system operator (DSO), a multi-market participation framework is proposed to stimulate the energy transaction potential of MGs through distributed and centralized ways. Firstly, an MG equipped with storage can contribute to the stability improvement at special nodes of the distribution grid where the uncertain factors (such as intermittent renewable sources and electric vehicles) exist. The DSO is thus interested in encouraging specified MGs to provide voltage stability services by creating a distribution grid service market (DGSM), where the dynamic production-price auction is used to capture the competition of the distributed MGs. Moreover, an aggregator, serving as a broker and controller for MGs, is considered to participate in the day-ahead wholesale market. A Stackelberg game is modeled accordingly to solve the price and quantity package allocation between aggregator and MGs. Finally, the modified IEEE-33 bus distribution test system is used to demonstrate the applicability and effectiveness of the proposed multi-market mechanism. The results under this framework improve both MGs and utility.


2021 ◽  
pp. 0309524X2110445
Author(s):  
Mohamed Azeroual ◽  
Younes Boujoudar ◽  
Ayman Aljarbouh ◽  
Hassan El Moussaoui ◽  
Hassane El Markhi

The integration of distributed generation (DG) units such as wind power into the distribution network are one of the most viable technique to meet the energy demand increases. But, the integration of these DG units into power systems can change the dynamic performances of the systems and create new challenges that are necessary to be taken care of in the operation of the network. The fault location and diagnosis are the most significant technical challenges that can improve power systems’ reliability and stability. In this paper, a Multi-Agent System (MAS) based on current amplitude and current direction measured proposed for fault location, isolation, and power restoration in a smart distribution system with the presence of a wind power generator. The agents can communicate and collaborate to locate the faulted line, then send trips signal to corresponding circuit breakers accordingly. The simulation results show the performance of the proposed techniques.


2021 ◽  
Author(s):  
Yuriy Lyubarskiy ◽  
Aleksandr Hrennikov

For" smart " electric networks, intelligent software tools that perform new functions and increase the level of computer support for dispatching solutions are considered. Given that one of the goals of building "smart" networks is to ensure recovery after accidents, the main focus of the textbook is on the problems of diagnosing emergency situations, intelligent monitoring of the state of electrical networks, and planning for the post-accident restoration of power supply. A new type of software simulator for dispatchers of electrical networks — a simulator for analyzing emergency situations-is considered in detail. The theoretical material is accompanied by many examples in the form of protocols for the operation of real intelligent systems. Meets the requirements of the federal state educational standards of higher education of the latest generation. For students of electric power specialties, managers and specialists of operational services of enterprises of power systems, electric and distribution networks and power stations, branches of PJSC ROSSETI, PJSC FGC UES, as well as students of advanced training courses.


Sign in / Sign up

Export Citation Format

Share Document