scholarly journals State of Art of Using Biofuels in Spark Ignition Engines

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 779
Author(s):  
Ashraf Elfasakhany
Keyword(s):  
Engine Performance ◽  
Spark Ignition ◽  
Pollutant Emissions ◽  
Spark Ignition Engines ◽  
Engine Emissions ◽  
Cold Starting ◽  
Starting Conditions ◽  
Unburned Hydrocarbons ◽  
Scientific Attention ◽  
State Of Art

Biofuels are receiving increased scientific attention, and recently different biofuels have been proposed for spark ignition engines. This paper presents the state of art of using biofuels in spark ignition engines (SIE). Different biofuels, mainly ethanol, methanol, i-butanol-n-butanol, and acetone, are blended together in single dual issues and evaluated as renewables for SIE. The biofuels were compared with each other as well as with the fossil fuel in SIE. Future biofuels for SIE are highlighted. A proposed method to reduce automobile emissions and reformulate the emissions into new fuels is presented and discussed. The benefits and weaknesses of using biofuels in SIE are summarized. The study established that ethanol has several benefits as a biofuel for SIE; it enhanced engine performance and decreased pollutant emissions significantly; however, ethanol showed some drawbacks, which cause problems in cold starting conditions and, additionally, the engine may suffer from a vapor lock situation. Methanol also showed improvements in engine emissions/performance similarly to ethanol, but it is poisonous biofuel and it has some sort of incompatibility with engine materials/systems; its being miscible with water is another disadvantage. The lowest engine performance was displayed by n-butanol and i-butanol biofuels, and they also showed the greatest amount of unburned hydrocarbons (UHC) and CO emissions, but the lowest greenhouse effect. Ethanol and methanol introduced the highest engine performance, but they also showed the greatest CO2 emissions. Acetone introduced a moderate engine performance and the best/lowest CO and UHC emissions. Single biofuel blends are also compared with dual ones, and the results showed the benefits of the dual ones. The study concluded that the next generation of biofuels is expected to be dual blended biofuels. Different dual biofuel blends are also compared with each other, and the results showed that the ethanol–methanol (EM) biofuel is superior in comparison with n-butanol–i-butanol (niB) and i-butanol–ethanol (iBE).

Aspects Regarding the Influence of Lambda Control System Faults on Pollutant Emissions of Spark Ignition Engines

2016 ◽  
Vol 823 ◽  
pp. 291-296 ◽  
Author(s):  
Ion Lespezeanu ◽  
Florin Marius Militaru ◽  
Octavian Alexa ◽  
Constantin Ovidiu Ilie ◽  
Marin Marinescu
Keyword(s):  
Control System ◽  
Combustion Process ◽  
Fuel Mixture ◽  
Spark Ignition ◽  
Pollutant Emissions ◽  
Spark Ignition Engines ◽  
Engine Emissions ◽  
Exhaust Gases ◽  
Experimental Researches

Flow corrections established based on Lambda control system of spark ignition engines, determines in a decisively way the quality of air-fuel mixture. Faults in the operation of the control system generates deviations of the mixture composition from stoichiometric report, in this way affecting the entire combustion process in engine cylinders. This phenomenon leads, among others, to changes regarding the density of pollutant emissions from exhaust gases. In this context, this paper presents experimental researches made using the simulation of faults that may occur in the control system to highlight their influence on the concentration of engine emissions.

scholarly journals Numerical Study of Engine Performance and Emissions for Port Injection of Ammonia into a Gasoline\Ethanol Dual-Fuel Spark Ignition Engine

2021 ◽  
Vol 11 (4) ◽  
pp. 1441
Author(s):  
Farhad Salek ◽  
Meisam Babaie ◽  
Amin Shakeri ◽  
Seyed Vahid Hosseini ◽  
Timothy Bodisco ◽  
...  
Keyword(s):  
Numerical Study ◽  
Combustion Process ◽  
Engine Performance ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Combustion Model ◽  
Dual Fuel ◽  
Spark Ignition Engines ◽  
Performance And Emissions ◽  
Hc Emissions

This study aims to investigate the effect of the port injection of ammonia on performance, knock and NOx emission across a range of engine speeds in a gasoline/ethanol dual-fuel engine. An experimentally validated numerical model of a naturally aspirated spark-ignition (SI) engine was developed in AVL BOOST for the purpose of this investigation. The vibe two zone combustion model, which is widely used for the mathematical modeling of spark-ignition engines is employed for the numerical analysis of the combustion process. A significant reduction of ~50% in NOx emissions was observed across the engine speed range. However, the port injection of ammonia imposed some negative impacts on engine equivalent BSFC, CO and HC emissions, increasing these parameters by 3%, 30% and 21%, respectively, at the 10% ammonia injection ratio. Additionally, the minimum octane number of primary fuel required to prevent knock was reduced by up to 3.6% by adding ammonia between 5 and 10%. All in all, the injection of ammonia inside a bio-fueled engine could make it robust and produce less NOx, while having some undesirable effects on BSFC, CO and HC emissions.

scholarly journals LES study on mixing and combustion in a Direct Injection Spark Ignition engine

2018 ◽  
Vol 73 ◽  
pp. 32
Author(s):  
Nicolas Iafrate ◽  
Anthony Robert ◽  
Jean-Baptiste Michel ◽  
Olivier Colin ◽  
Benedicte Cuenot ◽  
...  
Keyword(s):  
Ignition Time ◽  
Direct Injection ◽  
Combustion Process ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Pollutant Emissions ◽  
Spark Ignition Engines ◽  
Eddy Simulation ◽  
Mixture Preparation ◽  
The Impact

Downsized spark ignition engines coupled with a direct injection strategy are more and more attractive for car manufacturers in order to reduce pollutant emissions and increase efficiency. However, the combustion process may be affected by local heterogeneities caused by the interaction between the spray and turbulence. The aim for car manufacturers of such engine strategy is to create, for mid-to-high speeds and mid-up-high loads, a mixture which is as homogeneous as possible. However, although injection occurs during the intake phase, which favors homogeneous mixing, local heterogeneities of the equivalence ratio are still observed at the ignition time. The analysis of the mixture preparation is difficult to perform experimentally because of limited optical accesses. In this context, numerical simulation, and in particular Large Eddy Simulation (LES) are complementary tools for the understanding and analysis of unsteady phenomena. The paper presents the LES study of the impact of direct injection on the mixture preparation and combustion in a spark ignition engine. Numerical simulations are validated by comparing LES results with experimental data previously obtained at IFPEN. Two main analyses are performed. The first one focuses on the fuel mixing and the second one concerns the effect of the liquid phase on the combustion process. To highlight these phenomena, simulations with and without liquid injection are performed and compared.

scholarly journals A Fast CFD-Based Methodology for Determining the Cyclic Variability and Its Effects on Performance and Emissions of Spark-Ignition Engines

Energies ◽  
2019 ◽  
Vol 12 (21) ◽  
pp. 4131
Author(s):  
George M. Kosmadakis ◽  
Constantine D. Rakopoulos
Keyword(s):  
Spark Ignition ◽  
Pollutant Emissions ◽  
Computational Time ◽  
Spark Ignition Engines ◽  
Cyclic Variability ◽  
Indicated Mean Effective Pressure ◽  
Spark Plug ◽  
Performance And Emissions ◽  
Si Engines ◽  
Cyclic Variations

A methodology for determining the cyclic variability in spark-ignition (SI) engines has been developed recently, with the use of an in-house computational fluid dynamics (CFD) code. The simulation of a large number of engine cycles is required for the coefficient of variation (COV) of the indicated mean effective pressure (IMEP) to converge, usually more than 50 cycles. This is valid for any CFD methodology applied for this kind of simulation activity. In order to reduce the total computational time, but without reducing the accuracy of the calculations, the methodology is expanded here by simulating just five representative cycles and calculating their main parameters of concern, such as the IMEP, peak pressure, and NO and CO emissions. A regression analysis then follows for producing fitted correlations for each parameter as a function of the key variable that affects cyclic variability as has been identified by the authors so far, namely, the relative location of the local turbulent eddy with the spark plug. The application of these fitted correlations for a large number of engine cycles then leads to a fast estimation of the key parameters. This methodology is applied here for a methane-fueled SI engine, while future activities will examine cyclic variations in SI engines when fueled with different fuels and their mixtures, such as methane/hydrogen blends, and their associated pollutant emissions.

Analysis of the Feasibility of Usage of Standalone Controllers for Control of Spark-Ignition Engines

2016 ◽  
Vol 817 ◽  
pp. 245-252
Author(s):  
Sławomir Wierzbicki ◽  
Wojciech Kraskowski ◽  
Bronisław Kolator
Keyword(s):  
Control System ◽  
Engine Performance ◽  
Spark Ignition ◽  
Control Algorithms ◽  
Electronic Systems ◽  
Combustion Engines ◽  
Spark Ignition Engines ◽  
Performance Parameters ◽  
Engine Control System ◽  
Toxic Fumes

Modern combustion engines have developed into technologically advanced units that are controlled by complex electronic systems. The controllers of these systems are equipped with built-in control algorithms which allow the engine to achieve optimum engine performance parameters, in compliance with the strict requirements of standards related to the release of toxic fumes to the atmosphere. Unfortunately, this type of engine control system very often makes it difficult to carry out research, or even prevents it, because the change of engine's regulatory parameters is not possible. Currently in most cases research carried out on this type of engine requires the construction of special controllers that allow the user to interfere with the performance of the control system. This article presents the results of tests carried out on an ignition-type engine controlled by a standalone engine.

scholarly journals Performance and Exhaust Emissions of a Spark Ignition Internal Combustion Engine Fed with Butanol–Glycerol Blend

Energies ◽  
2021 ◽  
Vol 14 (20) ◽  
pp. 6473
Author(s):  
Stanislaw Szwaja ◽  
Michal Gruca ◽  
Michal Pyrc ◽  
Romualdas Juknelevičius
Keyword(s):  
Internal Combustion Engine ◽  
Combustion Engine ◽  
Engine Performance ◽  
Internal Combustion ◽  
Exhaust Emissions ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Spark Ignition Engines ◽  
Exhaust Temperature ◽  
Indicated Mean Effective Pressure

Investigation of a new type of fuel for the internal combustion engine, which can be successfully used in both the power generation and the automotive industries, is presented in this article. The proposed fuel is a blend of 75% n-butanol and 25% glycerol. The engine tests conducted with this glycerol–butanol blend were focused on the performance, combustion thermodynamics, and exhaust emissions of a spark-ignition engine. A comparative analysis was performed to find potential similarities and differences in the engine fueled with gasoline 95 and the proposed glycerol–butanol blend. As measured, CO exhaust emissions increased, NOx emissions decreased, and UHC emissions were unchanged for the glycerol–butanol blend when compared to the test with sole gasoline. As regards the engine performance and combustion progress, no significant differences were observed. Exhaust temperature remarkably decreased by 3.4%, which contributed to an increase in the indicated mean effective pressure by approximately 4% compared to gasoline 95. To summarize, the proposed glycerol–butanol blend can be directly used as a replacement for gasoline in internal combustion spark-ignition engines.

scholarly journals A comprehensive numerical study of the ethanol blended fuel effect on the performance and pollutant emissions in spark-ignition engine

2014 ◽  
Vol 18 (1) ◽  
pp. 29-38 ◽  
Author(s):  
Motlagh Zangooee ◽  
Razavi Modarres
Keyword(s):  
Numerical Study ◽  
Load Condition ◽  
Engine Performance ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Pollutant Emissions ◽  
Injection System ◽  
Thermodynamic State ◽  
Point Injection ◽  
Blended Fuel

In the present work, the performance and pollutant emissions in a spark ignition engine has been numerically investigated. For this purpose, the coupled KIVA code with CHEMKIN is used to predict the thermodynamic state of the cylinder charge during each cycle. Computations were carried out for a four cylinder, four strokes, multi point injection system (XU7 engine). Numerical cases have been performed up to 30% vol. of ethanol. Engine simulations are carried out at 2000, 2500 and 3000 rpm and full load condition. The numerical results showed that pollutant emissions reduce with increase in ethanol content. Based on engine performance, the most suitable fraction of ethanol in the blend was found to be nearly 15% for the XU7 engine.

Sign in / Sign up

Export Citation Format

Share Document