scholarly journals Amphiphilic Block Copolymers with Vinyl Caprolactam as Kinetic Gas Hydrate Inhibitors

Energies ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 341
Author(s):  
Faraz Rajput ◽  
Milan Maric ◽  
Phillip Servio
Keyword(s):  
Block Copolymers ◽  
Formation Rate ◽  
Water System ◽  
Water Soluble ◽  
Chain Extension ◽  
Methane Formation ◽  
Initial Growth ◽  
Reversible Addition ◽  
Pure Methane ◽  
Raft Agent

Macrosurfactants consisting of water-soluble poly(vinylcaprolactam) (PVCap) or poly(vinylpyrrolidone) (PVP) segments with comparatively shorter hydrophobic poly(styrene) (PS) or poly(2,3,4,5,6-pentafluorostyrene) (PPFS) segments were used as kinetic hydrate inhibitors (KHIs). These were synthesized with 2-cyanopropan-2-yl N-methyl-N-(pyridin-4-yl)dithiocarbamate switchable reversible addition–fragmentation chain transfer (RAFT) agent at 60 °C or 90 °C for 1-P(S/PFS) or 1-PVCap, respectively, followed by chain extension at 90 °C or 70 °C with PVCap or PVP, respectively. The addition of PVCap to the pure methane-water system resulted in a 53% reduction of methane consumption (comparable to PVP with 51% inhibition) during the initial growth phase. A PS-PVCap block copolymer comprised of 10 mol% PS and 90 mol% PVCap improved inhibition to 56% compared to the pure methane-water system with no KHIs. Substituting PS with a more hydrophobic PPFS segment further improved inhibition to 73%. By increasing the ratio of the hydrophobic PS- to PVCap- groups in the polymer, an increase of its inhibition potential was measured. For PPFS-PVCap, an increase of PPFS ratio from 5% to 10% decreased the methane formation rate by 6%. However, PPFS-PVCap block copolymers with more than 20 mol% PPFS were unable to dissolve in water due to increase in hydrophobicity and the attendant low critical micelle concentration (CMC).

scholarly journals Photo-Responsive Polymersomes as Drug Delivery System for Potential Medical Applications

Molecules ◽  
2020 ◽  
Vol 25 (21) ◽  
pp. 5147
Author(s):  
Wanting Hou ◽  
Ruiqi Liu ◽  
Siwei Bi ◽  
Qian He ◽  
Haibo Wang ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Block Copolymers ◽  
Drug Delivery System ◽  
Delivery System ◽  
Raft Polymerization ◽  
Amphiphilic Block Copolymers ◽  
Medical Applications ◽  
Drug Molecules ◽  
Reversible Addition ◽  
Raft Agent

Due to a strong retardation effect of o-nitrobenzyl ester on polymerization, it is still a great challenge to prepare amphiphilic block copolymers for polymersomes with a o-nitrobenzyl ester-based hydrophobic block. Herein, we present one such solution to prepare amphiphilic block copolymers with pure poly (o-nitrobenzyl acrylate) (PNBA) as the hydrophobic block and poly (N,N’-dimethylacrylamide) (PDMA) as the hydrophilic block using bulk reversible addition-fragmentation chain transfer (RAFT) polymerization of o-nitrobenzyl acrylate using a PDMA macro-RAFT agent. The developed amphiphilic block copolymers have a suitable hydrophobic/hydrophilic ratio and can self-assemble into photoresponsive polymersomes for co-loading hydrophobic and hydrophilic cargos into hydrophobic membranes and aqueous compartments of the polymersomes. The polymersomes demonstrate a clear photo-responsive characteristic. Exposure to light irradiation at 365 nm can trigger a photocleavage reaction of o-nitrobenzyl groups, which results in dissociation of the polymersomes with simultaneous co-release of hydrophilic and hydrophobic cargoes on demand. Therefore, these polymersomes have great potential as a smart drug delivery nanocarrier for controllable loading and releasing of hydrophilic and hydrophobic drug molecules. Moreover, taking advantage of the conditional releasing of hydrophilic and hydrophobic drugs, the drug delivery system has potential use in medical applications such as cancer therapy.

scholarly journals Synthesis and characterization of triphenylamine and Bbis(indolyl)methane center-functionalized polymer via reversible addition-fragmentation chain transfer polymerization

e-Polymers ◽  
2008 ◽  
Vol 8 (1) ◽  
Author(s):  
Jie Xu ◽  
Wei Shang ◽  
Jian Zhu ◽  
Zhenping Cheng ◽  
Nianchen Zhou ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Chain Transfer ◽  
Raft Polymerization ◽  
Chloroform Solution ◽  
Monomer Conversion ◽  
Benzyl Ester ◽  
Chain Extension ◽  
Reversible Addition ◽  
Raft Agent ◽  
Cyclic Voltammetry Method

AbstractA novel bis-functional reversible addition-fragmentation chain transfer (RAFT) agent bearing triphenylamine (TPA) and bis(indolyl)methane (BIM) groups, {4-[bis(1-carbodithioic acid benzyl ester-indol-3-yl)methyl]phenyl}diphenylamine (BCIMPDPA), was synthesized and successfully used as the RAFT agent to mediate the polymerization of styrene (St). The polymerization results showed that reversible addition-fragmentation chain transfer (RAFT) polymerization of St could be well controlled. The kinetic plot showed it was of first order and the numberaverage molecular weight (Mn(GPC)) of the polymer measured by GPC increased linearly with monomer conversion, simultaneously, the molecular weight distribution of the polymer was also relatively narrow. In addition, the existence of the TPA and BIM groups in the middle of polymer chain was confirmed by chain extension reaction and 1H NMR spectrum. The optical properties of the functionalized polystyrene (PS) in chloroform solution were also investigated. Furthermore, the redox process of the RAFT agent and the functionalized PS were studied by cyclic voltammetry method.

scholarly journals Synthesis of Poly(lactic acid)-block-poly(N,N-dimethylaminoethyl methacrylate) Copolymers with Controllable Block Structures via Reversible Addition Fragmentation Polymerization from Aminolyzed Poly(lactic acid)

2018 ◽  
Vol 2018 ◽  
pp. 1-9
Author(s):  
Wenwen Yu ◽  
Lijing Zhu ◽  
Jiangao Shi ◽  
Cunting Zhao
Keyword(s):  
Lactic Acid ◽  
Block Copolymers ◽  
Raft Polymerization ◽  
Poly Lactic Acid ◽  
Pseudo First Order Reaction ◽  
Oh Groups ◽  
Dimethylaminoethyl Methacrylate ◽  
Reversible Addition ◽  
Raft Agent ◽  
Different Temperatures

Poly(lactic acid)-block-poly(N,N-dimethylaminoethyl methacrylate) (PLA-PDMAEMA) copolymers were synthesized from aminolyzed PLA via reversible addition fragmentation (RAFT) polymerization. PLA undergoes aminolytic degradation with ethylenediamine (EDA). The kinetics of the aminolysis reaction of PLA at different temperatures and EDA concentrations was investigated in detail. The molar masses of products rapidly decreased in the initial stage at low aminolytic degree. Meanwhile, reactive –NH2 and –OH groups were introduced to the end of shorter PLA chains and used as sites to further immobilize the RAFT agent. PLA-PDMAEMA block copolymers were synthesized. A pseudo-first-order reaction kinetics was observed for the RAFT polymerization of PDMAEMA at a low conversion. By controlling the aminolysis reaction of PLA and RAFT polymerization degree of DMAEMA, the length distributions of the PLA and PDMAEMA blocks can be controlled. This method can be extended to more systems to obtain block copolymers with controllable block structure.

RAFT Polymerization of Monomers with Highly Disparate Reactivities: Use of a Single RAFT Agent and the Synthesis of Poly(styrene-block-vinyl acetate)

2013 ◽  
Vol 66 (12) ◽  
pp. 1564 ◽  
Author(s):  
Lily A. Dayter ◽  
Kate A. Murphy ◽  
Devon A. Shipp
Keyword(s):  
Block Copolymers ◽  
Vinyl Acetate ◽  
Chain Transfer ◽  
Raft Polymerization ◽  
Good Control ◽  
Scanning Calorimetry ◽  
Styrene Polymerization ◽  
Reversible Addition ◽  
Raft Agent ◽  
End Group

A single reversible addition–fragmentation chain transfer (RAFT) agent, malonate N,N-diphenyldithiocarbamate (MDP-DTC) is shown to successfully mediate the polymerization of several monomers with greatly differing reactivities in radical/RAFT polymerizations, including both vinyl acetate and styrene. The chain transfer constants (Ctr) for MDP-DTC for both these monomers were evaluated; these were found to be ~2.7 in styrene and ~26 in vinyl acetate, indicating moderate control over styrene polymerization and good control of vinyl acetate polymerization. In particular, the MDP-DTC RAFT agent allowed for the synthesis of block copolymers of these two monomers without the need for protonation/deprotonation switching, as has been previously developed with N-(4-pyridinyl)-N-methyldithiocarbamate RAFT agents, or other end-group transformations. The thermal properties of the block copolymers were studied using differential scanning calorimetry, and those with sufficiently high molecular weight and styrene composition appear to undergo phase separation. Thus, MDP-DTC may be useful for the production of other block copolymers consisting of monomers with highly dissimilar reactivities.

scholarly journals Design of Waterborne Asymmetric Block Copolymers as Thermoresponsive Materials

Polymers ◽  
2020 ◽  
Vol 12 (6) ◽  
pp. 1253
Author(s):  
Gordana Siljanovska Petreska ◽  
Christof van Sluijs ◽  
Clemens Auschra ◽  
Maria Paulis
Keyword(s):  
Mechanical Properties ◽  
Block Copolymers ◽  
Film Formation ◽  
Miniemulsion Polymerization ◽  
Two Phase ◽  
Dsc Measurements ◽  
Reversible Addition ◽  
Raft Agent ◽  
Different Temperatures ◽  
Morphological Differences

AB diblock waterborne copolymers made of styrene (St) and 2-ethylhexyl acrylate (2EHA) were synthesized by means of two-step reversible addition fragmentation chain transfer (RAFT) (mini)emulsion polymerization. Monofunctional asymmetric RAFT agent was used to initiate the polymerization. The hard polystyrene “A” block was synthesized via miniemulsion polymerization followed by 2EHA pre-emulsion feeding to form the soft “B” block. Polymerization kinetics and the evolution of the molecular weight distribution were followed during synthesis of both initial and final block copolymers. DSC measurements of the block copolymers revealed the existence of two glass transition temperatures (Tgs) and thus the occurrence of two-phase systems. Microscopic techniques (atomic force microscopy (AFM) and transmission electron microscopy (TEM)) were used to study the phase separation within the particles in the latex form, after film formation at room temperature cast directly from the latex and after different post-treatments well above the Tg of the hard-polystyrene domains, when complete particle coalescence had occurred. The morphological differences observed after different annealing temperatures were correlated with the mechanical properties analyzed by DMTA measurements. Finally, the differences found in the mechanical properties of the block copolymers annealed at different temperatures were correlated to their heat seal application results.

Dendrimers as Scaffolds for Reversible Addition Fragmentation Chain Transfer (RAFT) Agents: a Route to Star-Shaped Block Copolymers

2005 ◽  
Vol 58 (6) ◽  
pp. 483 ◽  
Author(s):  
Xiaojuan Hao ◽  
Eva Malmström ◽  
Thomas P. Davis ◽  
Martina H. Stenzel ◽  
Christopher Barner-Kowollik
Keyword(s):  
Molecular Weight ◽  
Block Copolymers ◽  
Butyl Acrylate ◽  
Chain Transfer ◽  
Raft Polymerization ◽  
Star Polymers ◽  
Size Exclusion ◽  
Chain Extension ◽  
Reversible Addition ◽  
Star Block Copolymers

Star-shaped block copolymers of styrene and n-butyl acrylate having three, six, and twelve pendent arms were successfully synthesized via reversible addition fragmentation chain transfer (RAFT) polymerization. Dendritic cores (based on 1,1,1-trimethylolpropane) of generation 0, 1, and 2 have been functionalized with 3-benzylsulfanylthiocarbonylsulfanylpropionic ester groups and have subsequently been employed to mediate the polymerization of styrene and n-butyl acrylate to generate macro-star-RAFT agents as starting materials for chain extension. The chain extension of the macro-star-RAFT agents with either styrene or n-butyl acrylate by bulk free radical polymerization at 60°C gives narrowly distributed polymer (final polydispersities close to 1.2) increasing linearly in molecular weight with increasing monomer-to-polymer conversion. However, with an increasing number of arms (i.e., when going from three- to twelve-armed star polymers), the chain extension becomes significantly less efficient. The molecular weight of the generated block copolymers was assessed using 1H NMR spectroscopy as well as size exclusion chromatography calibrated with linear polystyrene standards. The hydrodynamic radius, Rh, of the star block copolymers as well as the precursor star polymers was determined in tetrahydrofuran by dynamic light scattering (90°) at 25°C. Interestingly, the observed Rh–Mn relationships indicate a stronger dependence of Rh on Mn for poly(butyl acrylate) stars than for the corresponding styrene polymers. Rh increases significantly when the macro-star-RAFT agent is chain extended with either styrene or n-butyl acrylate.

scholarly journals Synthesis of PMMA-based block copolymers by consecutive irreversible and reversible addition–fragmentation chain transfer polymerizations

2019 ◽  
Vol 10 (48) ◽  
pp. 6630-6640 ◽  
Author(s):  
Cédric Bergerbit ◽  
Bárbara Farías-Mancilla ◽  
Lucie Seiler ◽  
Vincent Monteil ◽  
Simon Harrisson ◽  
...  
Keyword(s):  
Free Radical ◽  
Block Copolymers ◽  
Radical Polymerization ◽  
Vinyl Acetate ◽  
Chain Transfer ◽  
Free Radical Polymerization ◽  
Chain Extension ◽  
Reversible Addition

Xanthate and dithiocarbamate functionalized PMMAs obtained by free radical polymerization in the presence of xanthogen and dithiuram disulfide were used for chain extension with less activated monomers such as vinyl acetate and ethylene.

scholarly journals Insights on Molecular Characteristics of Hydrochars by 13C-NMR and Off-Line TMAH-GC/MS and Assessment of Their Potential Use as Plant Growth Promoters

Molecules ◽  
2021 ◽  
Vol 26 (4) ◽  
pp. 1026 ◽  
Author(s):  
Laís G. Fregolente ◽  
João Vitor dos Santos ◽  
Giovanni Vinci ◽  
Alessandro Piccolo ◽  
Altair B. Moreira ◽  
...  
Keyword(s):  
Plant Growth ◽  
Phosphoric Acid ◽  
13C Nmr ◽  
Chemical Properties ◽  
Water Soluble ◽  
Molecular Characteristics ◽  
Initial Growth ◽  
Growth Promoters ◽  
Molecular Features ◽  
Potential Use

Hydrochar is a carbon-based material that can be used as soil amendment. Since the physical-chemical properties of hydrochar are mainly assigned to process parameters, we aimed at evaluating the organic fraction of different hydrochars through 13C-NMR and off-line TMAH-GC/MS. Four hydrochars produced with sugarcane bagasse, vinasse and sulfuric or phosphoric acids were analyzed to elucidate the main molecular features. Germination and initial growth of maize seedlings were assessed using hydrochar water-soluble fraction to evaluate their potential use as growth promoters. The hydrochars prepared with phosphoric acid showed larger amounts of bioavailable lignin-derived structures. Although no differences were shown about the percentage of maize seeds germination, the hydrochar produced with phosphoric acid promoted a better seedling growth. For this sample, the greatest relative percentage of benzene derivatives and phenolic compounds were associated to hormone-like effects, responsible for stimulating shoot and root elongation. The reactions parameters proved to be determinant for the organic composition of hydrochar, exerting a strict influence on molecular features and plant growth response.

Sign in / Sign up

Export Citation Format

Share Document