scholarly journals Soot Particle Size Distribution, Regulated and Unregulated Emissions of a Diesel Engine Fueled with Palm Oil Biodiesel Blends

Energies ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 5736
Author(s):  
Jun Cong Ge ◽  
Nag Jung Choi
Keyword(s):  
Diesel Engine ◽  
Palm Oil ◽  
Soot Particle ◽  
Direct Injection ◽  
Operating Conditions ◽  
Biodiesel Blends ◽  
Primary Particles ◽  
Application Potential ◽  
Unregulated Emissions ◽  
Palm Oil Biodiesel

In this study, five fuels including pure diesel (B0), pure palm oil biodiesel (B100), and their blends (B10, B20, and B30) were investigated in relation to soot particle distribution and regulated and unregulated emission characteristics in a common rail direct injection (CRDI) diesel engine. The results indicated that CO, hydrocarbon (HC), and particulate matter (PM) regulated emissions were effectively controlled to a very low level by combining the addition of palm oil biodiesel (POB) to diesel with optimized engine operating conditions. Paper filters and TEM grids were used to capture the diesel particles. All the PM primary particles were less than 100 nm in diameter observed by TEM, and the average diameters of the PM primary particles for the biodiesel blends were distributed between 20 and 26 nm. Unregulated emissions such as trace metals including Pb, Mn, and Ba were found in the PM particles, and the xylene, toluene, and benzene unregulated emissions of B100 were reduced by 55.68%, 21.56%, and 18.32%, respectively, compared to those of B0. Therefore, POB is an excellent alternative fuel for diesel engines and has great application potential to solve the current pollution problems of regulated and unregulated emissions.

scholarly journals Study on Volatile Organic Compounds from Diesel Engine Fueled with Palm Oil Biodiesel Blends at Low Idle Speed

2020 ◽  
Vol 10 (14) ◽  
pp. 4969
Author(s):  
Ho Young Kim ◽  
Nag Jung Choi
Keyword(s):  
Diesel Engine ◽  
Palm Oil ◽  
Direct Injection ◽  
Blend Ratio ◽  
Engine Load ◽  
Biodiesel Blends ◽  
Idle Speed ◽  
Volatile Organic ◽  
Benzene Toluene ◽  
Palm Oil Biodiesel

This paper presents the combustion and emissions characteristics including volatile organic compound (VOC) of a common rail direct injection diesel engine fueled with palm oil biodiesel blends contained 0%, 10%, 30%, and 100% (by volume) biodiesel at low idle speed, i.e., 750 rpm. The nitrogen oxide (NOx) emissions of biodiesel blends were lower than that of pure diesel and NOx tended to decrease as the blending ratio increased. Soot opacity and hydrocarbon (HC) were reduced with an increasing blend ratio. Carbon monoxide (CO) varied with the engine load conditions. Under low load, CO emissions tended to decrease with increasing blending ratio and increased under high load. Alkane and aromatic VOCs were mostly emitted. Benzene and tetrahydrofuran accounted for the largest percentage of total detected VOCs in all test conditions. Benzene, toluene, ethylbenzene, xylene (BTEX, toxic aromatic VOCs) were detected for all tests. Among BTEX, benzene has the highest emission ratio, followed by xylene, toluene, and ethylbenzene. Benzene increased for all tests. At low engine load, toluene, ethylbenzene, and xylene decreased with increasing blend ratio. However, these increased at high engine load. When pure palm oil biodiesel was applied at high engine load, benzene decreased.

scholarly journals Application of Palm Oil Biodiesel Blends under Idle Operating Conditions in a Common-Rail Direct-Injection Diesel Engine

2018 ◽  
Vol 8 (12) ◽  
pp. 2665 ◽  
Author(s):  
Ho Kim ◽  
Jun Ge ◽  
Nag Choi
Keyword(s):  
Diesel Engine ◽  
Oxygen Content ◽  
Palm Oil ◽  
Direct Injection ◽  
High Viscosity ◽  
Common Rail ◽  
Pilot Injection ◽  
Blend Ratio ◽  
Co Emission ◽  
Palm Oil Biodiesel

This study describes the effects of palm oil biodiesel blended with diesel on the combustion performance, emission characteristics, and soot morphology in a 4-cylinder common-rail direct-injection (CRDI) diesel engine. The operational condition is idle speed, 750 rpm (the lowest speed of the test engine without any operation by driver), and the load conditions of the engine are 0 Nm and 40 Nm. Five kinds of biodiesel fuels are blended with diesel in 0%, 10%, 20%, 30%, and 100% proportions by volume. A pilot injection was applied at BTDC 15 °CA and 20 °CA. Part of the pilot injection affects the combustion of the main injection due to the deterioration of the spray because of the high viscosity of palm oil biodiesel. Palm oil biodiesel is sufficient to keep the engine stable in an idling state, but the fuel economy deteriorated. The deterioration of the spray due to the high viscosity of palm oil biodiesel is offset by the effect of oxygen content and high cetane number, resulting in a constant nitric oxide (NOx) emission. However, particulate matter (PM) is reduced. When the engine load is increased, the carbon monoxide (CO) emission amount increased because of the insufficient intake air and oxygen content to reduce the fuel-rich areas. However, when the palm oil biodiesel blend ratio was above a certain level, the influence of oxygen content in the palm oil biodiesel increased, resulting in reduced CO emission levels. Hydrocarbon (HC) was reduced by oxygen atoms in palm oil biodiesel. The sizes of particulates emitted from diesel engine using palm oil biodiesel decreased with an increased blend ratio because of oxidization of hydrocarbons absorbed on PM.

scholarly journals Effect of Ethanol Additives on Combustion and Emissions of a Diesel Engine Fueled by Palm Oil Biodiesel at Idling Speed

Energies ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1428
Author(s):  
Guirong Wu ◽  
Jun Cong Ge ◽  
Nag Jung Choi
Keyword(s):  
Diesel Engine ◽  
Palm Oil ◽  
Combustion Engine ◽  
Cetane Number ◽  
High Viscosity ◽  
Operating Conditions ◽  
Fuel Additive ◽  
High Oxygen Content ◽  
Smoke Opacity ◽  
Palm Oil Biodiesel

Biodiesel is known for its high cetane number and high oxygen content among other advantages, but its high viscosity and density are not trivial issues for fuel flow and atomization, especially under idling conditions. Due to low cylinder temperature and incomplete combustion, engine idling is one of the worst operating conditions. As a common fuel additive, ethanol can address some of the shortcomings of biodiesel. This work evaluated the combustion and emission characteristics of different concentrations of ethanol additives on a diesel engine fueled with palm oil biodiesel under idling conditions. The results show that ethanol helps to increase peak cylinder pressure and heat release rate, suppressing the production of certain emissions with a maximum reduction in smoke opacity of 71%.

Simulation of a Single Cylinder Diesel Engine Under Cold Start Conditions Using Simulink

2000 ◽  
Vol 123 (1) ◽  
pp. 117-124 ◽  
Author(s):  
H.-Q. Liu ◽  
N. G. Chalhoub ◽  
N. Henein
Keyword(s):  
Diesel Engine ◽  
Direct Injection ◽  
Cold Start ◽  
Operating Conditions ◽  
Combustion Model ◽  
Nonlinear Dynamic Model ◽  
Single Cylinder ◽  
Engine Model ◽  
Simulink Model ◽  
Engine Components

A nonlinear dynamic model is developed in this study to simulate the overall performance of a naturally aspirated, single cylinder, four-stroke, direct injection diesel engine under cold start and fully warmed-up conditions. The model considers the filling and emptying processes of the cylinder, blowby, intake, and exhaust manifolds. A single zone combustion model is implemented and the heat transfer in the cylinder, intake, and exhaust manifolds are accounted for. Moreover, the derivations include the dynamics of the crank-slider mechanism and employ an empirical model to estimate the instantaneous frictional losses in different engine components. The formulation is coded in modular form whereby each module, which represents a single process in the engine, is introduced as a single block in an overall Simulink engine model. The numerical accuracy of the Simulink model is verified by comparing its results to those generated by integrating the engine formulation using IMSL stiff integration routines. The engine model is validated by the close match between the predicted and measured cylinder gas pressure and engine instantaneous speed under motoring, steady-state, and transient cold start operating conditions.

scholarly journals THE EFFECT OF DIESEL-BIODIESEL BLENDS ON THE PERFORMANCE AND EXHAUST EMISSIONS OF A DIRECT INJECTION OFF-ROAD DIESEL ENGINE

Transport ◽  
2014 ◽  
Vol 29 (4) ◽  
pp. 440-448 ◽  
Author(s):  
Tomas Mickevičius ◽  
Stasys Slavinskas ◽  
Slawomir Wierzbicki ◽  
Kamil Duda
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Direct Injection ◽  
Engine Performance ◽  
Exhaust Emissions ◽  
Bench Test ◽  
Maximum Pressure ◽  
Cylinder Pressure ◽  
Biodiesel Blends ◽  
Performance And Emission

This paper presents a comparative analysis of the diesel engine performance and emission characteristics, when operating on diesel fuel and various diesel-biodiesel (B10, B20, B40, B60) blends, at various loads and engine speeds. The experimental tests were performed on a four-stroke, four-cylinder, direct injection, naturally aspirated, 60 kW diesel engine D-243. The in-cylinder pressure data was analysed to determine the ignition delay, the Heat Release Rate (HRR), maximum in-cylinder pressure and maximum pressure gradients. The influence of diesel-biodiesel blends on the Brake Specific Fuel Consumption (bsfc) and exhaust emissions was also investigated. The bench test results showed that when the engine running on blends B60 at full engine load and rated speed, the autoignition delay was 13.5% longer, in comparison with mineral diesel. Maximum cylinder pressure decreased about 1–2% when the amount of Rapeseed Methyl Ester (RME) expanded in the diesel fuel when operating at full load and 1400 min–1 speed. At rated mode, the minimum bsfc increased, when operating on biofuel blends compared to mineral diesel. The maximum brake thermal efficiency sustained at the levels from 0.3% to 6.5% lower in comparison with mineral diesel operating at full (100%) load. When the engine was running at maximum torque mode using diesel – RME fuel blends B10, B20, B40 and B60 the total emissions of nitrogen oxides decreased. At full and moderate load, the emission of carbon monoxide significantly raised as the amount of RME in fuel increased.

Analysis of Throttle Opening Variation Impact on a Diesel Engine Performance Using Second Law of Thermodynamics

2009 ◽  
Author(s):  
B. B. Sahoo ◽  
U. K. Saha ◽  
N. Sahoo ◽  
P. Prusty
Keyword(s):  
Diesel Engine ◽  
Direct Injection ◽  
Fuel Efficiency ◽  
Engine Performance ◽  
Second Law Of Thermodynamics ◽  
Operating Conditions ◽  
Second Law ◽  
Engine Fuel ◽  
Availability Analysis ◽  
Second Law Analysis

The fuel efficiency of a modern diesel engine has decreased due to the recent revisions to emission standards. For an engine fuel economy, the engine speed is to be optimum for an exact throttle opening (TO) position. This work presents an analysis of throttle opening variation impact on a multi-cylinder, direct injection diesel engine with the aid of Second Law of thermodynamics. For this purpose, the engine is run for different throttle openings with several load and speed variations. At a steady engine loading condition, variation in the throttle openings has resulted in different engine speeds. The Second Law analysis, also called ‘Exergy’ analysis, is performed for these different engine speeds at their throttle positions. The Second Law analysis includes brake work, coolant heat transfer, exhaust losses, exergy efficiency, and airfuel ratio. The availability analysis is performed for 70%, 80%, and 90% loads of engine maximum power condition with 50%, 75%, and 100% TO variations. The data are recorded using a computerized engine test unit. Results indicate that the optimum engine operating conditions for 70%, 80% and 90% engine loads are 2000 rpm at 50% TO, 2300 rpm at 75% TO and 3250 rpm at 100% TO respectively.

Lubricating Properties of Diesel Fuel and Hydrogenated Vegetable Oil with Palm Oil Biodiesel Blends Using HFRR Method

2021 ◽  
Author(s):  
Nur Allif Fathurrahman ◽  
Ahmad Syihan Auzani ◽  
Rizal Zaelani ◽  
Riesta Anggarani ◽  
Lies Aisyah ◽  
...  
Keyword(s):  
Vegetable Oil ◽  
Palm Oil ◽  
Diesel Fuel ◽  
Biodiesel Blends ◽  
Hydrogenated Vegetable Oil ◽  
Palm Oil Biodiesel ◽  
Lubricating Properties
Sign in / Sign up

Export Citation Format

Share Document