scholarly journals Production of Biodiesel from Castor Oil: A Review

Energies ◽  
2020 ◽  
Vol 13 (10) ◽  
pp. 2467 ◽  
Author(s):  
Carlos S. Osorio-González ◽  
Natali Gómez-Falcon ◽  
Fabiola Sandoval-Salas ◽  
Rahul Saini ◽  
Satinder K. Brar ◽  
...  
Keyword(s):  
Fatty Acid ◽  
Castor Oil ◽  
Fossil Fuels ◽  
Greenhouse Gas Emission ◽  
Fatty Acid Content ◽  
Cost Effective ◽  
Production Costs ◽  
Raw Material ◽  
Biodiesel Production ◽  
Attractive Alternative

An attractive alternative to the use of fossil fuels is biodiesel, which can be obtained from a variety of feedstock through different transesterification systems such as ultrasound, microwave, biological, chemical, among others. The efficient and cost-effective biodiesel production depends on several parameters such as free fatty acid content in the feedstock, transesterification reaction efficiency, alcohol:oil ratio, catalysts type, and several parameters during the production process. However, biodiesel production from vegetable oils is under development, causing the final price of biodiesel to be higher than diesel derived from petroleum. An alternative to decrease the production costs will be the use of economical feedstocks and simple production processes. Castor oil is an excellent raw material in terms of price and quality, but especially this non-edible vegetable oil does not have any issues or compromise food security. Recently, the use of castor oil has attracted attention for producing and optimizing biodiesel production, due to high content of ricinoleic fatty acid and the possibility to esterify with only methanol, which assures low production costs. Additionally, biodiesel from castor oil has different advantages over conventional diesel. Some of them are biodegradable, non-toxic, renewable, they can be used alone, low greenhouse gas emission, among others. This review discusses and analyzes different transesterification processes, technologies, as well as different technical aspects during biodiesel production using castor oil as a feedstock.

scholarly journals Optimization, Transesterification and Analytical Study of Rhus typhina Non-Edible Seed Oil as Biodiesel Production

Energies ◽  
2019 ◽  
Vol 12 (22) ◽  
pp. 4290 ◽  
Author(s):  
Inam Ullah Khan ◽  
Zhenhua Yan ◽  
Jun Chen
Keyword(s):  
Fatty Acid ◽  
Oil Content ◽  
Seed Oil ◽  
Fatty Acid Content ◽  
Acid Methyl Ester ◽  
Production Costs ◽  
Raw Material ◽  
Biodiesel Production ◽  
Edible Plant ◽  
Rhus Typhina

Production of biodiesel from non-edible oils is one of the effective methods to reduce production costs and alleviate the obstacle of traditional raw material supply. Rhus typhina L. (RT) is a promising non-edible plant because it grows fast and has abundant seeds. But previously reported oil content of RT was only 9.7% and 12%. Further research into improving the biodiesel production of RT seed oil is urgently needed. Here we obtained the biodiesel production of RT with a maximum oil content of 22% with a low free fatty acid content of 1.0%. The fatty acid methyl ester (FAMEs) of the RT seed oil was produced by a standard optimized protocol use KOH as a catalyst with the highest yield of 93.4% (w/w). The quality and purity of RT FAMEs, as well as the physio-chemical characterizations of the biodiesel products, were investigated and compared with the international standard of ASTM D6751 and EN 14214. The values of fuel properties are comparable with mineral diesel and environmentally friendly. Overall, the proposed RT seed oil could be a potential source of raw materials for producing high-quality biodiesel after the optimization and transesterification.

Performance of Compression Ignition Engine with Coated Piston for Multiple Blends of Methyl Castor Oil

2016 ◽  
Vol 8 (2) ◽  
Author(s):  
V.H. Wilson ◽  
V. Yalini
Keyword(s):  
Fatty Acid ◽  
Free Fatty Acid ◽  
Castor Oil ◽  
Fatty Acid Content ◽  
Maximum Yield ◽  
Biodiesel Production ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Step Process ◽  
Performance And Emission

Fossil fuel is getting exhausted at a fast rate and contributes to high carbon monoxide emissions. Biodiesel, being environmentally friendly, has better performance than diesel. Castor oil is an easily available vegetable oil in India. But its high viscosity leads to blockage of the fuel lines. The amount of free fatty acid more than 1% leads to soap formation which necessitates the biodiesel production in a two step process. The first step of acid catalyzed esterification process reduces the free fatty acid content of castor oil to below 1%. The second step of transesterification process converts the preheated oil to castor biodiesel. This two step process gave a maximum yield of 90%.The methyl castor oil (biodiesel) is blended with diesel in different proportions on volume basis as 15:85 (B15), 25:75 (B25), and 35:65 (B35). These blended oils are used to run a single cylinder four stroke compression ignition engine with different coatings of pistons, to study and compare the engine performance and emission characteristics at different load conditions.

scholarly journals Challenges of Downstream Processing for the Production of Biodiesel from Microalgae

2018 ◽  
Vol 3 (1) ◽  
pp. 50-60 ◽  
Author(s):  
Vânia Novais Pôjo
Keyword(s):  
Fossil Fuels ◽  
Cost Effective ◽  
Downstream Processing ◽  
Review Article ◽  
Production Costs ◽  
Biodiesel Production ◽  
Microalgal Biomass ◽  
Promising Alternative ◽  
Microalgae Biomass ◽  
Research Initiatives

The continuous reliance on fossil fuels is unsustainable, due to the depletion of global reserves and the greenhouse gas emissions associated with their use. Therefore, there are vigorous research initiatives intended to develop renewable alternatives. Microalgae are a promising alternative for biodiesel production and have received increasing attention during the last few decades. However, is not yet sufficiently cost-effective to compete with petroleum-based conventional fuels. This happens essentially because of downstream processing – harvesting microalgae biomass and extraction of lipids are two of the most expensive processes from the overall process. Harvesting, drying, cell disruption, oil extraction and transesterification (into biodiesel) are highlighted processes in this review article. The techniques associated with each process present advantages and handicaps that are here discussed. Improvements that will directly affect the final production costs of microalgal biomass-based biofuels are also proposed.

scholarly journals PENGARUH KECEPATAN PENGADUKAN DAN SUHU REAKSI PADA ESTERIFIKASI MINYAK MENTAH DEDAK PADI BERKANDUNGAN ASAM LEMAK TINGGI

2019 ◽  
Vol 1 (3) ◽  
pp. 76
Author(s):  
Orchidea R. ◽  
Armanto Armanto ◽  
Lidia Yustianingsih ◽  
M. Rachimoellah
Keyword(s):  
Fatty Acid ◽  
Rice Bran ◽  
Rice Bran Oil ◽  
Fatty Acid Content ◽  
Acid Methyl Ester ◽  
High Fatty Acid ◽  
Biologically Active ◽  
Raw Material ◽  
Biodiesel Production ◽  
Esterification Reaction

Rice bran oil (RBO) derived from rice bran (RB) which could use as an alternative raw material for biodiesel production. Rice bran (dedak) are used as feed for poultry, pigs, and some dairy cattle because they are relatively cheap and do not require processing. The utilization of these oil further cheapen the cost of biodiesel and increased the economonic value of RB. The choice of RBO as a raw material for biodiesel due to the rice bran oil’s potentials. RBO is considered to be one of the most nutritious oils due to its favorable fatty acids composition and a unique combination of naturally occurring biologically active and antioxidant compounds (oryzanol, tocopherol, tocotrienol, phytosterol, polyphenol, dan squalene). The research emphazised on esterification reaction because of the rapid increase of FFA content in RBO after the milling of rice. Storage time of RB increased the FFA content. Mixing velocity dan time reaction was the other two variables which are affecting the esterification reaction. Those two variables are studied in this experiment.                 Experiment were designed to examine the mixing velocity and temperature reaction to the conversion of fatty acid methyl ester (FAME). Reaction condition 20:1 molar ratio methanol to FFA content and 5%-v/v catalyst (to the oil) was used in all experiments. Mixing velocity and time reaction was arranged as follows: 500, 750,  1000 rpm and 40, 50, 60oC, respectively. Research conducted in four parts: soxhlet extraction with n-hexane as a solvent; oil-solvent separation process; and the last step was esterification reaction. Reaction conducted on three neck round bottom flask equipped with magnetic stirrer, refluk condenser and thermometer. Crude product was separated first from unreacted methanol, glycerol, and catalyst prior to physical analyzed of biodiesel’s properties. Conversion of FAME was calculated from acid value difference, after and before reaction conducted.                 It was found that mixing velocity influenced the FAME conversion not significantly (specially in crude rice bran oil high fatty acid content esterification); increasing in temperature will increase the FAME conversion; kinetic reaction controlled by chemical reaction; and biodiesel product from this research already fullfill the requirements of Indonesian Standard of Biodiesel (FBI-SO1-03).

scholarly journals Economic and Sustainability of Biodiesel Production—A Systematic Literature Review

2021 ◽  
Vol 3 (1) ◽  
pp. 19-36
Author(s):  
Tamás Mizik ◽  
Gábor Gyarmati
Keyword(s):  
Literature Review ◽  
Systematic Literature Review ◽  
Volatile Fatty Acids ◽  
First Generation ◽  
Production Costs ◽  
Raw Material ◽  
Biodiesel Production ◽  
Important Research Topic ◽  
The Social ◽  
High Production

As Earth’s fossil energy resources are limited, there is a growing need for renewable resources such as biodiesel. That is the reason why the social, economic and environmental impacts of biofuels became an important research topic in the last decade. Depleted stocks of crude oil and the significant level of environmental pollution encourage researchers and professionals to seek and find solutions. The study aims to analyze the economic and sustainability issues of biodiesel production by a systematic literature review. During this process, 53 relevant studies were analyzed out of 13,069 identified articles. Every study agrees that there are several concerns about the first-generation technology; however, further generations cannot be price-competitive at this moment due to the immature technology and high production costs. However, there are promising alternatives, such as wastewater-based microalgae with up to 70% oil content, fat, oils and grease (FOG), when production cost is below 799 USD/gallon, and municipal solid waste-volatile fatty acids technology, where the raw material is free. Proper management of the co-products (mainly glycerol) is essential, especially at the currently low petroleum prices (0.29 USD/L), which can only be handled by the biorefineries. Sustainability is sometimes translated as cost efficiency, but the complex interpretation is becoming more common. Common elements of sustainability are environmental and social, as well as economic, issues.

scholarly journals A Robust Two-Step Process for the Efficient Conversion of Acidic Soybean Oil for Biodiesel Production

Catalysts ◽  
2018 ◽  
Vol 8 (11) ◽  
pp. 527 ◽  
Author(s):  
Gaojian Ma ◽  
Lingmei Dai ◽  
Dehua Liu ◽  
Wei Du
Keyword(s):  
Fatty Acid ◽  
Soybean Oil ◽  
Lower Cost ◽  
Immobilized Lipase ◽  
Acid Methyl Ester ◽  
Acid Value ◽  
Catalytic Performance ◽  
Raw Material ◽  
Biodiesel Production ◽  
Negative Effect

Acidic oil, which is easily obtained and with lower cost, is a potential raw material for biodiesel production. Apart from containing large quantity of FFAs (free fatty acids), acidic oil usually contains some amount of inorganic acid, glycerides and some other complex components, leading to complicated effect on lipase’s catalytic performance. Exploring the efficient process of converting acidic oil for biodiesel production is of great significance to promote the use of acidic oil. A two-step conversion process for acidic soybean oil was proposed in this paper, where sulfuric acid-mediated hydrolysis was adopted first, then the hydrolyzed free fatty acid, collected from the upper oil layer was further subject to the second-step esterification catalyzed by immobilized lipase Novozym435. Through this novel process, the negative effect caused by harmful impurities and by-product glycerol on lipase was eliminated. A fatty acid methyl ester (FAME) yield of 95% could be obtained with the acid value decreased to 4 mgKOH/g from 188 mgKOH/g. There was no obvious loss in lipase’s activity and a FAME yield of 90% could be maintained with the lipase being repeatedly used for 10 batches. This process was found to have a good applicability to different acidic oils, indicating it has great prospect for converting low quality oil sources for biodiesel preparation.

scholarly journals RAPE SEED OIL TETRAHYDROFURFURYLESTERS

2015 ◽  
Vol 1 ◽  
pp. 46
Author(s):  
K. Malins ◽  
V. Kampars ◽  
R. Kampare ◽  
T. Rusakova
Keyword(s):  
Rapeseed Oil ◽  
Fossil Fuels ◽  
Raw Materials ◽  
Methyl Esters ◽  
Cetane Number ◽  
Food Prices ◽  
Raw Material ◽  
Biodiesel Production ◽  
Cold Filter Plugging Point ◽  
Mineral Oils

The transesterification of vegetable oil using various kinds of alcohols is a simple and efficient renewable fuel synthesis technique. Products obtained by modifying natural triglycerides in transesterification reaction substitute fossil fuels and mineral oils. Currently the most significant is the biodiesel, a mixture of fatty acid methyl esters, which is obtained in a reaction with methanol, which in turn is obtained from fossil raw materials. In biodiesel production it would be more appropriate to use alcohols which can be obtained from renewable local raw materials. Ethanol rouses interest as a possible reagent, however, its production locally is based on the use of grain and therefore competes with food production so it would implicitly cause increase in food prices. Another raw material option is alcohols that can be obtained from furfurole. Furfurole is obtained in dehydration process from pentose sugars which can be extracted from crop straw, husk and other residues of agricultural production. From furfurole the tetrahydrofurfuryl alcohol (THFA), a raw material for biodiesel, can be produced. By transesterifying rapeseed oil with THFA it would be possible to obtain completely renewable biodiesel with properties very close to diesel [2-4]. With the purpose of developing the synthesis of such fuel, in this work a three-stage synthesis of rapeseed oil tetrahydrofurfurylesters (ROTHFE) in sulphuric acid presence has been performed, achieving product with purity over 98%. The most important qualitative factors of ROTHFE have been determined - cold filter plugging point, cetane number, water content, Iodine value, phosphorus content, density, viscosity and oxidative stability.

scholarly journals Ethanol-Based Biodiesel from Waste Vegetable Oil

2007 ◽  
Vol 7 (1 & 2) ◽  
pp. 83
Author(s):  
Mary Grace M. Oliveros ◽  
Amiliza B. Baiting ◽  
Menchie G. Lumain ◽  
Maria Theresa I. Cabaraban
Keyword(s):  
Vegetable Oil ◽  
Fast Food ◽  
Fossil Fuels ◽  
Material Balance ◽  
Raw Material ◽  
Biodiesel Production ◽  
Exhaust Emission ◽  
Waste Vegetable Oil ◽  
Power Testing ◽  
Technological Analysis

Waste vegetable oil, mainly coming from frying residues, can be used as raw material to obtain a diesel fuel (biodiesel). Biodiesel, a nontoxic, biodegradable, diesel-like fuel, is an important energy alternative capable of decreasing environmental problems caused by the consumption of fossil fuels. The utilization of waste vegetable oils as raw material in biodiesel production was studied. Research was undertaken to establish the availability of used vegetable oil to supply a biodiesel process. It is intended that this work forms an academic study combined with an environmental and technological analysis of the merits of biodiesel as a sustainable fuel. Laboratory experimentation investigated the possibility of using waste vegetable oil from the local fast food chains, and potassium hydroxide as catalyst for the transesterification process. The cleaned waste vegetable oil undergoes transesterification for 4 hours, after which, the biodiesel is separated from the glycerin by gravity. Washing is necessary to remove residual catalyst or soap. Overall material balance for the process gives: 1 kg Waste Vegetable oil + 0.18 kg EtOH + 0.01 kg KOH → 0.74 kg Biodiesel + 0.44 kg Glycerin The biodiesel, in pure form (B100) and in 50% proportion (B50) with petroleum diesel, was run in an essentially unmodified Toyota 2C diesel engine. Smoke density (opacity) and CO exhaust emission both decreased with B50. However, Nox increased with B50. Fuel consumption during engine power testing is significantly greater using the biodiesel, but is also significantly reduced with B50.

scholarly journals Lipid accumulation of Chlorella sp. TLD6B from the Taklimakan Desert under salt stress

PeerJ ◽  
2021 ◽  
Vol 9 ◽  
pp. e11525
Author(s):  
Hong Li ◽  
Jun Tan ◽  
Yun Mu ◽  
Jianfeng Gao
Keyword(s):  
Salt Stress ◽  
Fatty Acid ◽  
Lipid Accumulation ◽  
Large Scale ◽  
Fatty Acid Biosynthesis ◽  
High Salinity ◽  
Raw Material ◽  
Biodiesel Production ◽  
Taklimakan Desert ◽  
Acid Biosynthesis

Chlorella has become an important raw material for biodiesel production in recent years, and Chlorella sp. TLD6B, a species with high lipid concentrations and high salt and drought tolerance, has been cultivated on a large scale. To explore the lipid accumulation of Chlorella sp. TLD6B and its relationship to external NaCl concentrations, we performed physiological measurements and genome-wide gene expression profiling under different levels of salt stress. Chlorella sp. TLD6B was able to tolerate high levels of salt stress (0.8 M NaCl addition). Lipid concentrations initially increased and then decreased as salt stress increased and were highest under the addition of 0.2 M NaCl. Comparative transcriptomic analysis revealed that salt stress enhanced the expression of genes related to sugar metabolism and fatty acid biosynthesis (the ACCases BC and BCCP, KAS II, and GPDHs involved in TAG synthesis), thereby promoting lipid accumulation under the addition of 0.2 M NaCl. However, high salinity inhibited cell growth. Expression of three SADs, whose encoded products function in unsaturated fatty acid biosynthesis, was up-regulated under high salinity (0.8 M NaCl addition). This research clarifies the relationship between salt tolerance and lipid accumulation and promotes the utilization of Chlorella sp. TLD6B.

scholarly journals A review on production of biodiesel from waste cooking oils

2018 ◽  
Vol 1 (2) ◽  
pp. 32-41
Author(s):  
Muzhda Azizi ◽  
Sweeta Akbari
Keyword(s):  
Fossil Fuels ◽  
Greenhouse Gas Emission ◽  
Good Alternative ◽  
Waste Cooking Oil ◽  
Biodiesel Production ◽  
Waste Cooking Oils ◽  
Low Toxicity ◽  
The One ◽  
Cooking Oils ◽  
Different Sources

Nowadays, preservation of natural resources on earth is one of the most important concerns of humanity. In this regard, increasing the consumption of energy is one of the most critical challenges that humans are facing. Because, on the one hand, the untapped use of different sources of energy from fossil fuels can destroy this natural resource and, on the other hand, pollution from the use of these resources is a serious threat to the environment. Recent research suggests that affordable, sustainable and environmentally friendly fuels, which can be a good alternative to fossil fuels, have become more important. Therefore, biodiesel has made it possible to release less greenhouse gas emission and low toxicity emissions, which can partly meet fuel requirements and is the best alternative for petroleum diesel. In addition, the waste cooking oils are a major source of biodiesel for their essential compounds, such as glycerol. The use of waste cooking oils can reduce biodiesel production cost by 60 to 90 percent. Therefore, the main objective of this review is to study the production of biodiesel using transesterification reaction of waste cooking oil as an alternative fuel to petroleum diesel that can be used easily in diesel engines.

Sign in / Sign up

Export Citation Format

Share Document