scholarly journals Wave-Turbulence Decomposition Methods Applied to Tidal Energy Site Assessment

Energies ◽  
2020 ◽  
Vol 13 (5) ◽  
pp. 1245 ◽  
Author(s):  
Larissa Perez ◽  
Remo Cossu ◽  
Camille Couzi ◽  
Irene Penesis
Keyword(s):  
Moving Average ◽  
Tidal Energy ◽  
Decomposition Methods ◽  
Wave Turbulence ◽  
Site Assessment ◽  
Tidal Turbines ◽  
Integral Scales ◽  
Tidal Stream ◽  
Versatile Technique ◽  
Turbulence Parameters

High levels of turbulence have been proven to substantially increase the blade loadings on tidal turbines, outlining the need of properly characterizing turbulence parameters in tidal energy sites. The presence of long surface gravity waves may cause a significant bias on the estimation of these parameters, which requires wave-turbulence decomposition methods that are currently missing from guidelines. Here, three techniques of decomposing wave and turbulence are tested: the stopband filter (SB), moving average filter (MA), and synchrosqueezing wavelet transform (SWT). The study site, Banks Strait, Tasmania, is a 16 km wide channel that presents high potential for tidal energy generation. Wave peak periods at the study site were found to vary mostly between 7 and 12 s, with maximum exceeding 15 s. Turbulence intensities (TI), turbulent kinetic energy (TKE), and integral scales are quantified. Our results indicate differences between the estimates obtained from each method. The MA highly underestimates turbulence, resulting in TI values which were nearly 50% lower than those obtained from other decomposition methods. While TI and TKE estimated from the SB and the SWT techniques are quite similar, integral length scales are considerably underestimated by the SB. These findings reveal that the SWT is a more reliable method because of the more accurate estimates of turbulence parameters and indicate the need of establishing guidelines which address wave-turbulence decomposition in tidal stream energy site assessments. Despite having shown to be quite a versatile technique, further investigation of its applicability in data from other prospective tidal energy sites is necessary to fully assess the generality of the SWT technique.

scholarly journals Accuracy of the actuator disc-RANS approach for predicting the performance and wake of tidal turbines

2013 ◽  
Vol 371 (1985) ◽  
pp. 20120293 ◽  
Author(s):  
W. M. J. Batten ◽  
M. E. Harrison ◽  
A. S. Bahaj
Keyword(s):  
Large Scale ◽  
Scale Effects ◽  
Tidal Energy ◽  
Rans Model ◽  
Tidal Turbines ◽  
Actuator Disc ◽  
Element Approach ◽  
Tidal Stream ◽  
Turbine Wake ◽  
Horizontal Axis Turbine

The actuator disc-RANS model has widely been used in wind and tidal energy to predict the wake of a horizontal axis turbine. The model is appropriate where large-scale effects of the turbine on a flow are of interest, for example, when considering environmental impacts, or arrays of devices. The accuracy of the model for modelling the wake of tidal stream turbines has not been demonstrated, and flow predictions presented in the literature for similar modelled scenarios vary significantly. This paper compares the results of the actuator disc-RANS model, where the turbine forces have been derived using a blade-element approach, to experimental data measured in the wake of a scaled turbine. It also compares the results with those of a simpler uniform actuator disc model. The comparisons show that the model is accurate and can predict up to 94 per cent of the variation in the experimental velocity data measured on the centreline of the wake, therefore demonstrating that the actuator disc-RANS model is an accurate approach for modelling a turbine wake, and a conservative approach to predict performance and loads. It can therefore be applied to similar scenarios with confidence.

scholarly journals Characterization of the vertical evolution of the three-dimensional turbulence for fatigue design of tidal turbines

2020 ◽  
Vol 378 (2178) ◽  
pp. 20190495 ◽  
Author(s):  
Maxime Thiébaut ◽  
Jean-François Filipot ◽  
Christophe Maisondieu ◽  
Guillaume Damblans ◽  
Christian Jochum ◽  
...  
Keyword(s):  
Turbulence Intensity ◽  
Large Scale ◽  
Three Dimensional ◽  
Vertical Direction ◽  
Tidal Energy ◽  
Tidal Turbines ◽  
Tidal Stream ◽  
Vertical Evolution ◽  
Tidal Stream Energy ◽  
Scale Turbulence

A system of two coupled four-beam acoustic Doppler current profilers was used to collect turbulence measurements over a 36-h period at a highly energetic tidal energy site in Alderney Race. This system enables the evaluation of the six components of the Reynolds stress tensor throughout a large proportion of the water column. The present study provides mean vertical profiles of the velocity, the turbulence intensity and the integral lengthscale along the streamwise, spanwise and vertical direction of the tidal current. Based on our results and considering a tidal-stream energy convertor (TEC) aligned with the current main direction, the main elements of turbulence prone to affect the structure (material fatigue) and to alter power generation would likely be: (i) the streamwise turbulence intensity ( I x ), (ii) the shear stress, v ′ w ′ ¯ , (iii) the normal stress, u ′ 2 ¯ and (iv) the vertical integral lengthscale ( L z ). The streamwise turbulence intensity, ( I x ), was found to be higher than that estimated at other tidal energy sites across the world for similar height above bottom. Along the vertical direction, the length ( L z ) of the large-scale turbulence eddies was found to be equivalent to the rotor diameter of the TEC Sabella D10. It is considered that the turbulence metrics presented in this paper will be valuable for TECs designers, helping them optimize their designs as well as improve loading prediction through the lifetime of the machines. This article is part of the theme issue ‘New insights on tidal dynamics and tidal energy harvesting in the Alderney Race’.

scholarly journals Passive flow control mechanisms with bioinspired flexible blades in cross-flow tidal turbines

2021 ◽  
Vol 62 (5) ◽  
Author(s):  
Stefan Hoerner ◽  
Shokoofeh Abbaszadeh ◽  
Olivier Cleynen ◽  
Cyrille Bonamy ◽  
Thierry Maître ◽  
...  
Keyword(s):  
Turbine Blades ◽  
Cross Flow ◽  
Tidal Energy ◽  
Control Mechanisms ◽  
Passive Flow Control ◽  
Turbine Efficiency ◽  
Tidal Turbines ◽  
Passive Flow ◽  
Axial Turbines ◽  
The Cost

Abstract State-of-the-art technologies for wind and tidal energy exploitation focus mostly on axial turbines. However, cross-flow hydrokinetic tidal turbines possess interesting features, such as higher area-based power density in array installations and shallow water, as well as a generally simpler design. Up to now, the highly unsteady flow conditions and cyclic blade stall have hindered deployment at large scales because of the resulting low single-turbine efficiency and fatigue failure challenges. Concepts exist which overcome these drawbacks by actively controlling the flow, at the cost of increased mechatronical complexity. Here, we propose a bioinspired approach with hyperflexible turbine blades. The rotor naturally adapts to the flow through deformation, reducing flow separation and stall in a passive manner. This results in higher efficiency and increased turbine lifetime through decreased structural loads, without compromising on the simplicity of the design. Graphic abstract

scholarly journals Passive acoustic methods for tracking the 3D movements of small cetaceans around marine structures

2020 ◽  
Author(s):  
Douglas Gillespie ◽  
Laura Palmer ◽  
Jamie Macaulay ◽  
Carol Sparling ◽  
Gordon Hastie
Keyword(s):  
Marine Mammals ◽  
New Technologies ◽  
Three Dimensional ◽  
Tidal Energy ◽  
Time Of Arrival ◽  
Marine Animals ◽  
Tidal Turbines ◽  
Wide Range ◽  
Tidal Turbine ◽  
Passive Acoustic

AbstractA wide range of anthropogenic structures exist in the marine environment with the extent of these set to increase as the global offshore renewable energy industry grows. Many of these pose acute risks to marine wildlife; for example, tidal energy generators have the potential to injure or kill seals and small cetaceans through collisions with moving turbine parts. Information on fine scale behaviour of animals close to operational turbines is required to understand the likely impact of these new technologies. There are inherent challenges associated with measuring the underwater movements of marine animals which have, so far, limited data collection. Here, we describe the development and application of a system for monitoring the three-dimensional movements of cetaceans in the immediate vicinity of a subsea structure. The system comprises twelve hydrophones and software for the detection and localisation of vocal marine mammals. We present data demonstrating the systems practical performance during a deployment on an operational tidal turbine between October 2017 and October 2019. Three-dimensional locations of cetaceans were derived from the passive acoustic data using time of arrival differences on each hydrophone. Localisation accuracy was assessed with an artificial sound source at known locations and a refined method of error estimation is presented. Calibration trials show that the system can accurately localise sounds to 2m accuracy within 20m of the turbine but that localisations become highly inaccurate at distances greater than 35m. The system is currently being used to provide data on rates of encounters between cetaceans and the turbine and to provide high resolution tracking data for animals close to the turbine. These data can be used to inform stakeholders and regulators on the likely impact of tidal turbines on cetaceans.

scholarly journals Experimental Assessment of Flow, Performance, and Loads for Tidal Turbines in a Closely-Spaced Array

Energies ◽  
2020 ◽  
Vol 13 (8) ◽  
pp. 1977 ◽  
Author(s):  
Donald R. Noble ◽  
Samuel Draycott ◽  
Anup Nambiar ◽  
Brian G. Sellar ◽  
Jeffrey Steynor ◽  
...  
Keyword(s):  
Numerical Models ◽  
Ocean Energy ◽  
Complex Flow ◽  
Flow Measurements ◽  
Power Extraction ◽  
Tidal Turbines ◽  
Tidal Stream ◽  
Flow Through ◽  
And Performance ◽  
Structural Loading

Tidal stream turbines are subject to complex flow conditions, particularly when installed in staggered array configurations where the downstream turbines are affected by the wake and/or bypass flow of upstream turbines. This work presents, for the first time, methods for and results from the physical testing of three 1/15 scale instrumented turbines configured in a closely-spaced staggered array, and demonstrates experimentally that increased power extraction can be achieved through reduced array separation. A comprehensive set of flow measurements was taken during several weeks testing in the FloWave Ocean Energy Research Facility, with different configurations of turbines installed in the tank in a current of 0.8 m/s, to understand the effect that the front turbines have on flow through the array and on the inflow to the centrally placed rearmost turbine. Loads on the turbine structure, rotor, and blade roots were measured along with the rotational speed of the rotor to assess concurrently in real-time the effects of flow and array geometry on structural loading and performance. Operating in this closely-spaced array was found to improve the power delivered by the rear turbine by 5.7–10.4% with a corresponding increase in the thrust loading on the rotor of 4.8–7.3% around the peak power operating point. The experimental methods developed and results arising from this work will also be useful for further scale-testing elsewhere, validating numerical models, and for understanding the performance and loading of full-scale tidal stream turbines in arrays.

Assessment of Zooplankton Injury and Mortality Associated With Underwater Turbines for Tidal Energy Production

2013 ◽  
Vol 47 (4) ◽  
pp. 142-150 ◽  
Author(s):  
David R. Schlezinger ◽  
Craig D. Taylor ◽  
Brian L. Howes
Keyword(s):  
Size Distribution ◽  
Particle Density ◽  
Collaborative Work ◽  
Tidal Energy ◽  
Energy Potential ◽  
Marine Renewable Energy ◽  
Tidal Turbines ◽  
Video Images ◽  
Significant Difference ◽  
Tidal Turbine

AbstractCollaborative work between the UMASS-Marine Renewable Energy Center, the Town of Edgartown, and the Coastal Systems Program is focused on developing the tidal energy potential of Muskeget Channel. We have undertaken detailed oceanographic and environmental surveys to optimize in-stream turbine power generation and to quantify potential environmental effects. In 2011 and 2012, tidal turbine demonstration projects were conducted in Muskeget Channel to determine the combined effects of blade strikes, shear stress, turbulence, and cavitation on zooplankton. Single turbines may minimally impact zooplankton populations; however, full-scale projects may potentially alter zooplankton populations forming the base of coastal food webs. Static plankton tows were performed up- and downstream of the operating turbine axis. Integral flow meters allowed adjustment of tow duration to optimize zooplankton density in the concentrate. Samples were held at in situ temperatures, and sequential photomicrographs and video images were taken to determine particle density, size distribution, and the number of live organisms in samples taken up and down gradient of the operating tidal turbines within 3 h of collection. Statistical analysis showed no significant difference in the total number or size distribution of motile zooplankters, indicating tidal turbine operation did not cause significant mortality and suggested that impacts of commercial size tidal energy projects upon zooplankton populations in Muskeget Channel may be negligible.

scholarly journals The energy yield potential of a large tidal stream turbine array in the Alderney Race

2020 ◽  
Vol 378 (2178) ◽  
pp. 20190502 ◽  
Author(s):  
D. S. Coles ◽  
L. S. Blunden ◽  
A. S. Bahaj
Keyword(s):  
Large Scale ◽  
Tidal Energy ◽  
Yield Potential ◽  
Energy Yield ◽  
Ambient Flow ◽  
Flow Speeds ◽  
Tidal Stream ◽  
Original Array ◽  
Array Performance ◽  
Tidal Stream Turbine

This research provides an updated energy yield assessment for a large tidal stream turbine array in the Alderney Race. The original array energy yield estimate was presented in 2004. Enhancements to this original work are made through the use of a validated two-dimensional hydrodynamic model, enabling the resolution of flow modelling to be improved and the impacts of array blockage to be quantified. Results show that a range of turbine designs (i.e. rotor diameter and power capacity) are needed for large-scale development, given the spatial variation in bathymetry and flow across the Alderney Race. Array blockage causes a reduction in flow speeds in the array of up to 2.5 m s −1 , increased flow speeds around the array of up to 1 m s −1 and a reduction in the mean volume flux through the Alderney Race of 8%. The annual energy yield estimate of the array is 3.18 TWh, equivalent to the electricity demand of around 1 million homes. The capacity factor of the array is 18%, implying sub-optimal array design. This result demonstrates the need for turbine rated speed to be selected based on the altered flow regime, not the ambient flow. Further enhancement to array performance is explored through increases to rotor diameter and changes to device micro-siting, demonstrating the significant potential for array performance improvement. This article is part of the theme issue ‘New insights on tidal dynamics and tidal energy harvesting in the Alderney Race’.

The impact of spring-neap tidal-stream cycles in tidal energy assessments in the Chilean Inland Sea

2019 ◽  
Vol 139 ◽  
pp. 496-506 ◽  
Author(s):  
Osvaldo Artal ◽  
Oscar Pizarro ◽  
Héctor H. Sepúlveda
Keyword(s):  
Tidal Energy ◽  
Tidal Stream ◽  
The Impact

scholarly journals Identifying economically viable tidal sites within the Alderney Race through optimization of levelized cost of energy

2020 ◽  
Vol 378 (2178) ◽  
pp. 20190500
Author(s):  
Z. L. Goss ◽  
D. S. Coles ◽  
M. D. Piggott
Keyword(s):  
Large Scale ◽  
Tidal Energy ◽  
Monte Carlo Analysis ◽  
Lessons Learned ◽  
Fixed Costs ◽  
Levelized Cost ◽  
Learning Rates ◽  
Cost Of Energy ◽  
Case Study Site ◽  
Tidal Stream

Costs of tidal stream energy generation are anticipated to fall considerably with array expansion and time. This is due to both economies of volume, where arrays comprising of large numbers of turbines can split fixed costs over a greater number of devices, and learning rates, where the industry matures and so arrays of the same size become cheaper due to lessons learned from previous installations. This paper investigates how tidal energy arrays can be designed to minimize the levelized cost of energy (LCOE), by optimizing not only the location but also the number of devices, to find a suitable balance between decreased costs due to economies of volume and diminishing returns due to global blockage effects. It focuses on the Alderney Race as a case study site due to the high velocities found there, making it a highly suitable site for large-scale arrays. It is demonstrated that between 1 and 2 GW could be feasibly extracted as costs in the tidal industry fall, with the LCOE depending greatly on the assumed costs. A Monte–Carlo analysis is undertaken to account for variability in capital and operational cost data used as inputs to the array optimization. Once optimized, the estimated P50 LCOE of an 80 MW array is £110/MWh. This estimate aligns closely with the level of subsidy considered for tidal stream projects in the Alderney Race in the past. This article is part of the theme issue ‘New insights on tidal dynamics and tidal energy harvesting in the Alderney Race’.

scholarly journals Tidal Energy: Perspective of Bangladesh

2018 ◽  
Vol 41 (2) ◽  
pp. 201-215
Author(s):  
Mohammad Asadul Haque ◽  
Mst Sujata Khatun
Keyword(s):  
Tidal Energy ◽  
Tidal Range ◽  
Tidal Power ◽  
Power Resources ◽  
Wide Range ◽  
Tidal Data ◽  
Tidal Stream ◽  
Tidal Power Generation ◽  
Ocean Thermal Energy ◽  
Academy Of Sciences

Bangladesh is blessed by the nature with renewable resources that are used all over the world in a wide range but in our country it is limited. The country has vast ocean area with various power resources such as Wave energy, Ocean Thermal Energy Conversion (OTEC) and Tidal energy. In the Bay of Bengal, the tidal range and tidal stream speed indicate the potentiality of tidal power generation in Bangladesh. This paper describes various methods of utilizing tidal power to generate electricity and assess the tidal energy resources of three potential sites of Bangladesh. The tidal data recorded by the Department of Hydrography of The Chittagong Port Authority (CPA) and Bangladesh Inland Water Transport Authority (BIWTA) have been analyzed. This study clearly indicates the bright prospects of tidal power in Bangladesh.Journal of Bangladesh Academy of Sciences, Vol. 41, No. 2, 201-215, 2017

Sign in / Sign up

Export Citation Format

Share Document