scholarly journals Catalytic Conversion of Palm Oil to Bio-Hydrogenated Diesel over Novel N-Doped Activated Carbon Supported Pt Nanoparticles

Energies ◽  
2019 ◽  
Vol 13 (1) ◽  
pp. 132 ◽  
Author(s):  
Wei Jin ◽  
Laura Pastor-Pérez ◽  
Juan J. Villora-Pico ◽  
Mercedes M. Pastor-Blas ◽  
Antonio Sepúlveda-Escribano ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Palm Oil ◽  
Fixed Bed ◽  
Pt Nanoparticles ◽  
Added Value ◽  
Fixed Bed Reactor ◽  
Transportation Fuel ◽  
Electronic Density ◽  
Promising Alternative ◽  
Conversion Rates

Bio-hydrogenated diesel (BHD), derived from vegetable oil via hydrotreating technology, is a promising alternative transportation fuel to replace nonsustainable petroleum diesel. In this work, a novel Pt-based catalyst supported on N-doped activated carbon prepared from polypyrrole as the nitrogen source (Pt/N-AC) was developed and applied in the palm oil deoxygenation process to produce BHD in a fixed bed reactor system. High conversion rates of triglycerides (conversion of TG > 90%) and high deoxygenation percentage (DeCOx% = 76% and HDO% = 7%) were obtained for the palm oil deoxygenation over Pt/N-AC catalyst at optimised reaction conditions: T = 300 °C, 30 bar of H2, and LHSV = 1.5 h−1. In addition to the excellent performance, the Pt/N-AC catalyst is highly stable in the deoxygenation reaction, as confirmed by the XRD and TEM analyses of the spent sample. The incorporation of N atoms in the carbon structure alters the electronic density of the catalyst, favouring the interaction with electrophilic groups such as carbonyls, and thus boosting the DeCOx route over the HDO pathway. Overall, this work showcases a promising route to produce added value bio-fuels from bio-compounds using advanced N-doped catalysts.

Preparation of activated carbon from Canadian coals using a fixed-bed reactor and a spouted bed-kiln system

Fuel ◽  
1996 ◽  
Vol 75 (2) ◽  
pp. 227-237 ◽  
Author(s):  
Ajay K. Dalai ◽  
Jasimuz Zaman ◽  
E.Stanley Hall ◽  
Eric L. Tollefson
Keyword(s):  
Activated Carbon ◽  
Fixed Bed ◽  
Fixed Bed Reactor ◽  
Spouted Bed

scholarly journals Evaluation of Fixed-Bed Cultures with Immobilized Lactococcus Lactis ssp. Lactis on Different Scales

2017 ◽  
Vol 11 (1) ◽  
pp. 16-25 ◽  
Author(s):  
Rebecca Faschian ◽  
Ilyas Eren ◽  
Steven Minden ◽  
Ralf Pörtner
Keyword(s):  
Dilution Rate ◽  
Lactococcus Lactis ◽  
Scale Up ◽  
Fixed Bed ◽  
Pilot Scale ◽  
Fixed Bed Reactor ◽  
Batch Mode ◽  
Promising Alternative ◽  
Fixed Beds ◽  
Pilot Scale Reactor

Fixed-bed processes, where cells are immobilized within macroporous carriers, are a promising alternative to processes with suspended cells. A scale-up concept is presented in order to evaluate the performance as part of process design of fixed-bed processes. Therefore,Lactococcus lactiscultivation in chemostat and batch mode was compared to fixed bed cultures on three different scales, the smallest being the downscaledMultifermwith 10 mL fixed bed units, the second a 100 mL fixed-bed reactor and the third a pilot scale reactor with 1 L fixed bed volume. As expected, the volume specific lactate productivity of all cultivations was dependent on dilution rate. In suspension chemostat culture a maximum of 2.3 g·L-1·h-1was reached. Due to cell retention in the fixed-beds, productivity increased up to 8.29 g·L-1·h-1at a dilution rate of D = 1.16 h-1(corresponding to 2.4·µmax) on pilot scale. For all fixed bed cultures a common spline was obtained indicating a good scale-up performance.

CO2 Capture Using Calcium Oxide Applicable to In-Situ Separation of CO2 From H2 Production Processes

2013 ◽  
Author(s):  
Saeed Danaei Kenarsari ◽  
Yuan Zheng
Keyword(s):  
Calcium Oxide ◽  
Co2 Capture ◽  
Fixed Bed ◽  
H2 Production ◽  
Fixed Bed Reactor ◽  
Capture Process ◽  
Conversion Rates ◽  
In Situ Separation ◽  
Separation Of Co2

A lab-scale CO2 capture system is designed, fabricated, and tested for performing CO2 capture via carbonation of very fine calcium oxide (CaO) with particle size in micrometers. This system includes a fixed-bed reactor made of stainless steel (12.7 mm in diameter and 76.2 mm long) packed with calcium oxide particles dispersed in sand particles; heated and maintained at a certain temperature (500–550°C) during each experiment. The pressure along the reactor can be kept constant using a back pressure regulator. The conditions of the tests are relevant to separation of CO2 from combustion/gasification flue gases and in-situ CO2 capture process. The inlet flow, 1% CO2 and 99% N2, goes through the reactor at the flow rate of 150 mL/min (at standard conditions). The CO2 percentage of the outlet gas is monitored and recorded by a portable CO2 analyzer. Using the outlet composition, the conversion of calcium oxide is figured and employed to develop the kinetics model. The results indicate that the rates of carbonation reactions considerably increase with raising the temperature from 500°C to 550°C. The conversion rates of CaO-carbonation are well fitted to a shrinking core model which combines chemical reaction controlled and diffusion controlled models.

scholarly journals Process Optimization for Ethyl Ester Production in Fixed Bed Reactor Using Calcium Oxide Impregnated Palm Shell Activated Carbon (CaO/PSAC)

2012 ◽  
Vol 1 (3) ◽  
pp. 81 ◽  
Author(s):  
A Buasri ◽  
B Ksapabutr ◽  
M Panapoy ◽  
N Chaiyut
Keyword(s):  
Activated Carbon ◽  
Ethyl Ester ◽  
Calcium Oxide ◽  
Residence Time ◽  
Fixed Bed ◽  
Fixed Bed Reactor ◽  
Molar Ratio ◽  
Optimum Conditions ◽  
Palm Shell ◽  
Bed Height

: The continuous production of ethyl ester was studied by using a steady-state fixed bed reactor (FBR). Transesterification of palm stearin (PS) and waste cooking palm oil (WCPO) with ethanol in the presence of calcium oxide impregnated palm shell activated carbon (CaO/PSAC) solid catalyst was investigated. This work was determined the optimum conditions for the production of ethyl ester from PS and WCPO in order to obtain fatty acid ethyl ester (FAEE) with the highest yield. The effects of reaction variables such as residence time, ethanol/oil molar ratio, reaction temperature, catalyst bed height and reusability of catalyst in a reactor system on the yield of biodiesel were considered. The optimum conditions were the residence time 2-3 h, ethanol/oil molar ratio 16-20, reaction temperature at 800C, and catalyst bed height 300 mm which yielded 89.46% and 83.32% of the PS and WCPO conversion, respectively. CaO/PSAC could be used repeatedly for 4 times without any activation treatment and no obvious activity loss was observed. It has potential for industrial application in the transesterification of triglyceride (TG). The fuel properties of biodiesel were determined. Keywords: biodiesel, calcium oxide, ethyl ester, fixed bed reactor, palm shell activated carbon

scholarly journals Effect of Temperature on Plasma-Assisted Catalytic Cracking of Palm Oil into Biofuels

2020 ◽  
Vol 9 (1) ◽  
pp. 107-112 ◽  
Author(s):  
I. Istadi ◽  
Teguh Riyanto ◽  
Luqman Buchori ◽  
Didi Dwi Anggoro ◽  
Roni Ade Saputra ◽  
...  
Keyword(s):  
Palm Oil ◽  
Catalytic Cracking ◽  
Plasma Reactor ◽  
Fixed Bed ◽  
Liquid Product ◽  
Fixed Bed Reactor ◽  
Effect Of Temperature ◽  
Catalytic Reactor ◽  
Catalytic Role ◽  
Reactor Temperature

Plasma-assisted catalytic cracking is an attractive method for producing biofuels from vegetable oil. This paper studied the effect of reactor temperature on the performance of plasma-assisted catalytic cracking of palm oil into biofuels. The cracking process was conducted in a Dielectric Barrier Discharge (DBD)-type plasma reactor with the presence of spent RFCC catalyst. The reactor temperature was varied at 400, 450, and 500 ºC. The liquid fuel product was analyzed using a gas chromatography-mass spectrometry (GC-MS) to determine the compositions. Result showed that the presenceof plasma and catalytic role can enhance the reactor performance so that the selectivity of the short-chain hydrocarbon produced increases. The selectivity of gasoline, kerosene, and diesel range fuels over the plasma-catalytic reactor were 16.43%, 52.74% and 21.25%, respectively, while the selectivity of gasoline, kerosene and diesel range fuels over a conventional fixed bed reactor was 12.07%, 39.07%, and 45.11%, respectively. The increasing reactor temperature led to enhanced catalytic role of cracking reaction,particularly directing the reaction to the shorter hydrocarbon range. The reactor temperature dependence on the liquid product components distribution over the plasma-catalytic reactor was also studied. The aromatic and oxygenated compounds increased with the reactor temperature.©2020. CBIORE-IJRED. All rights reserved

scholarly journals MgO Dispersed on Activated Carbon as Water Tolerant Catalyst for the Conversion of Ethanol into Butanol

2019 ◽  
Vol 9 (7) ◽  
pp. 1371 ◽  
Author(s):  
Stefano Cimino ◽  
Jessica Apuzzo ◽  
Luciana Lisi
Keyword(s):  
Activated Carbon ◽  
Surface Area ◽  
Fixed Bed ◽  
High Water ◽  
Fixed Bed Reactor ◽  
High Dispersion ◽  
Water Tolerance ◽  
Butanol Yield

MgO supported on activated carbon (AC) with a load ranging from 10% to 30% has been investigated as catalyst for the conversion of ethanol into butanol at 400 °C in a fixed bed reactor at different GHSV. Catalysts have been characterized by XRD, SEM/EDX, and N2 physisorption at 77 K. The high dispersion of MgO into the pores of the support provides strongly enhanced performance with respect to bulk MgO. MgO/AC catalysts have been also tested under wet feed conditions showing high water tolerance and significantly larger butanol yield with respect to an alumina supported Ru/MgO catalyst. After wet operation, the increased surface area of the catalyst leads to better performance once dry feed conditions are restored.

scholarly journals Supercritical Transesterification of Palm Oil and Hydrated Ethanol in a Fixed Bed Reactor with a CaO/Al2O3 Catalyst

Energies ◽  
2012 ◽  
Vol 5 (4) ◽  
pp. 1062-1080 ◽  
Author(s):  
Ruengwit Sawangkeaw ◽  
Pornicha Tejvirat ◽  
Chawalit Ngamcharassrivichai ◽  
Somkiat Ngamprasertsith
Keyword(s):  
Palm Oil ◽  
Fixed Bed ◽  
Fixed Bed Reactor ◽  
Al2o3 Catalyst

Adsorption Kinetics of Oxytetracycline onto Activated Carbon in a Closed-Loop Fixed Bed Reactor

2013 ◽  
Vol 11 (1) ◽  
pp. 569-576 ◽  
Author(s):  
Djamila Djedouani ◽  
Malika Chabani ◽  
Abdeltif Amrane ◽  
Aicha Bensmaili
Keyword(s):  
Mass Transfer ◽  
Activated Carbon ◽  
Closed Loop ◽  
Solid Phase ◽  
Positive Impact ◽  
Fixed Bed ◽  
Sorption Process ◽  
Fixed Bed Reactor ◽  
Dynamic Interactions ◽  
Initial Concentration

Abstract Batch experiments were carried out for the adsorption of oxytetracycline (OTC) onto powdered activated carbon (PAC). The operating variables examined were the initial concentration (20–150 mg L−1) and the adsorbent concentration (0.75–1.75 g L−1). As observed increasing the initial concentration, while decreasing the adsorbent dosage, had a positive impact on the amount of OTC uptake (mg g−1). The kinetics was examined in a closed-loop fixed bed adsorber to propose an adsorption mechanism, to understand the dynamic interactions of OTC with ECA08 activated carbon and to predict its fate with time. The sorption results were analyzed using chemical and physical kinetics models. For concentrations lower than 70 mg L−1, the sorption process was found to be controlled by both surface reactions and mass transfer. The average external mass transfer coefficient and intraparticle diffusion coefficient were found to be 0.0051 min−1 and 1.97 mg g−1 min−0.5, respectively. For concentrations higher than 70 mg L−1, mass transfer became rapid and the chemical reaction at the surface of the solid phase was the rate-limiting step. The results showed that the adsorption reaction was accurately described by the pseudo-second-order model.

Effect of Fractal Dimension of Powder Activated Carbon on SO2 Adsorption

2014 ◽  
Vol 955-959 ◽  
pp. 2169-2172 ◽  
Author(s):  
Bing Li ◽  
Jian Ming Xue ◽  
Yue Yang Xu ◽  
Hong Liang Wang ◽  
Chun Yuan Ma ◽  
...  
Keyword(s):  
Fractal Dimension ◽  
Activated Carbon ◽  
Adsorption Capacity ◽  
Activated Carbons ◽  
Fixed Bed ◽  
Fixed Bed Reactor ◽  
Removal Capacity ◽  
Powder Activated Carbon

Five kinds of powder activatedcarbons were studied to investigate the removal of SO2 from flue gasin a fixed bed reactor. The fractal dimension of activated carbon was determined by N2 adsorption isothermat 77Kand SO2 adsorptioncapacity was correlated with thefractal dimension. The results show thatthe activated carbons prepared from different precursors by differentactivation methods have different fractal dimension. Big differences in SO2 adsorption capacity are found between fivekinds of activated carbons. SO2 adsorption capacity increases with the fractaldimension increasing. The results indicate that the fractal dimension could be used as a indicator of SO2removal capacity on powder activated carbon.

Sign in / Sign up

Export Citation Format

Share Document