scholarly journals Natural Convection of Non-Newtonian Power-Law Fluid in a Square Cavity with a Heat-Generating Element

Energies ◽  
2019 ◽  
Vol 12 (11) ◽  
pp. 2149 ◽  
Author(s):  
Darya S. Loenko ◽  
Aroon Shenoy ◽  
Mikhail A. Sheremet
Keyword(s):  
Heat Transfer ◽  
Stream Function ◽  
Power Law ◽  
Stokes Equations ◽  
Heat Removal ◽  
Modern Technology ◽  
Navier Stokes ◽  
Local Source ◽  
Thermal Conductivity Ratio ◽  
Square Cavity

Development of modern technology in microelectronics and power engineering necessitates the creation of effective cooling systems. This is made possible by the use of the special fins technology within the cavity or special heat transfer liquids in order to intensify the heat removal from the heat-generating elements. The present work is devoted to the mathematical modeling of thermogravitational convection of a non-Newtonian fluid in a closed square cavity with a local source of internal volumetric heat generation. The behavior of the fluid is described by the Ostwald-de Waele power law model. The defining Navier–Stokes equations written using the dimensionless stream function, vorticity and temperature are solved using the finite difference method. The effects of the Rayleigh number, power-law index, and thermal conductivity ratio on heat transfer and the flow structure are studied. The obtained results are presented in the form of isolines of the stream function and temperature, as well as the dependences of the average Nusselt number and average temperature on the governing parameters.

Finite Analytic Numerical Solution Axisymmetric Navier-Stokes and Energy Equations

1983 ◽  
Vol 105 (3) ◽  
pp. 639-645 ◽  
Author(s):  
Ching-Jen Chen ◽  
Young Hwan Yoon
Keyword(s):  
Heat Transfer ◽  
Numerical Solution ◽  
Numerical Method ◽  
Stream Function ◽  
Analytic Solution ◽  
Numerical Solutions ◽  
Stokes Equations ◽  
Navier Stokes ◽  
Inlet Temperature ◽  
Local Analytic Solution

Connective heat transfer for steady-state laminar flow in axisymmetric coordinates is considered. Numerical solutions for flow pattern and temperature distribution are obtained by the finite analytic numerical method applied to the Navier-Stokes equations expressed in terms of vorticity and stream function, and the energy equation. The finite analytic numerical method differs from other numerical methods in that it utilizes a local analytic solution in an element of the problem to construct the total numerical solution. Finite analytic solutions of vorticity, stream function, temperature, and heat transfer coefficients for flow with Reynolds numbers of 5, 100, 1000, and 2000, and Prandtl numbers of 0.1, 1.0, and 10.0 with uniform grid sizes, are reported for an axisymmetric pipe with a sudden expansion and contraction. The wall temperature is considered to be isothermal and differs from the inlet temperature. It is shown that the finite analytic is stable, converges rapidly, and simulates the convection of fluid flow accurately, since the local analytic solution is capable of simulating automatically the influence of skewed convection through the element boundary on the interior nodal values, thereby minimizing the false numerical diffusion.

scholarly journals A Code for Simulating Heat Transfer in Turbulent Channel Flow

Mathematics ◽  
2021 ◽  
Vol 9 (7) ◽  
pp. 756
Author(s):  
Federico Lluesma-Rodríguez ◽  
Francisco Álcantara-Ávila ◽  
María Jezabel Pérez-Quiles ◽  
Sergio Hoyas
Keyword(s):  
Heat Transfer ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Turbulent Channel Flow ◽  
Passive Scalar ◽  
Direct Numerical Simulations ◽  
Time Dependent ◽  
Navier Stokes ◽  
Thermal Flow ◽  
Navier Stokes Equations

One numerical method was designed to solve the time-dependent, three-dimensional, incompressible Navier–Stokes equations in turbulent thermal channel flows. Its originality lies in the use of several well-known methods to discretize the problem and its parallel nature. Vorticy-Laplacian of velocity formulation has been used, so pressure has been removed from the system. Heat is modeled as a passive scalar. Any other quantity modeled as passive scalar can be very easily studied, including several of them at the same time. These methods have been successfully used for extensive direct numerical simulations of passive thermal flow for several boundary conditions.

Fast forced liquid film spreading on a substrate: flow, heat transfer and phase transition

2010 ◽  
Vol 656 ◽  
pp. 189-204 ◽  
Author(s):  
ILIA V. ROISMAN
Keyword(s):  
Heat Transfer ◽  
Phase Transition ◽  
Stokes Equations ◽  
Substrate Surface ◽  
Reynolds Numbers ◽  
Drop Impact ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Theoretical Predictions ◽  
Viscous Drop

This theoretical study is devoted to description of fluid flow and heat transfer in a spreading viscous drop with phase transition. A similarity solution for the combined full Navier–Stokes equations and energy equation for the expanding lamella generated by drop impact is obtained for a general case of oblique drop impact with high Weber and Reynolds numbers. The theory is applicable to the analysis of the phenomena of drop solidification, target melting and film boiling. The theoretical predictions for the contact temperature at the substrate surface agree well with the existing experimental data.

Modeling and analysis of solar air channels with attachments of different shapes

2019 ◽  
Vol 29 (5) ◽  
pp. 1815-1845 ◽  
Author(s):  
Younes Menni ◽  
Ahmed Azzi ◽  
A. Chamkha
Keyword(s):  
Heat Transfer ◽  
Stokes Equations ◽  
Research Work ◽  
Convection Heat Transfer ◽  
Navier Stokes ◽  
Transfer Coefficients ◽  
Navier Stokes Equations ◽  
Content Type ◽  
Modeling And Analysis ◽  
Air Channels

Purpose This paper aims to report the results of numerical analysis of turbulent fluid flow and forced-convection heat transfer in solar air channels with baffle-type attachments of various shapes. The effect of reconfiguring baffle geometry on the local and average heat transfer coefficients and pressure drop measurements in the whole domain investigated at constant surface temperature condition along the top and bottom channels’ walls is studied by comparing 15 forms of the baffle, which are simple (flat rectangular), triangular, trapezoidal, cascaded rectangular-triangular, diamond, arc, corrugated, +, S, V, double V (or W), Z, T, G and epsilon (or e)-shaped, with the Reynolds number changing from 12,000 to 32,000. Design/methodology/approach The baffled channel flow model is controlled by the Reynolds-averaged Navier–Stokes equations, besides the k-epsilon (or k-e) turbulence model and the energy equation. The finite volume method, by means of commercial computational fluid dynamics software FLUENT is used in this research work. Findings Over the range investigated, the Z-shaped baffle gives a higher thermal enhancement factor than with simple, triangular, trapezoidal, cascaded rectangular-triangular, diamond, arc, corrugated, +, S, V, W, T, G and e-shaped baffles by about 3.569-20.809; 3.696-20.127; 3.916-20.498; 1.834-12.154; 1.758-12.107; 7.272-23.333; 6.509-22.965; 8.917-26.463; 8.257-23.759; 5.513-18.960; 8.331-27.016; 7.520-26.592; 6.452-24.324; and 0.637-17.139 per cent, respectively. Thus, the baffle of Z-geometry is considered as the best modern model of obstacles to significantly improve the dynamic and thermal performance of the turbulent airflow within the solar channel. Originality/value This analysis reports an interesting strategy to enhance thermal transfer in solar air channels by use of attachments with various shapes

Measurement and Calculation of Nozzle Guide Vane End Wall Heat Transfer

1998 ◽  
Author(s):  
Neil W. Harvey ◽  
Martin G. Rose ◽  
John Coupland ◽  
Terry Jones
Keyword(s):  
Heat Transfer ◽  
Stokes Equations ◽  
Guide Vane ◽  
Correction Method ◽  
Navier Stokes ◽  
Design Data ◽  
Navier Stokes Equations ◽  
Wall Functions ◽  
Transfer Rates ◽  
Nozzle Guide

A 3-D steady viscous finite volume pressure correction method for the solution of the Reynolds averaged Navier-Stokes equations has been used to calculate the heat transfer rates on the end walls of a modern High Pressure Turbine first stage stator. Surface heat transfer rates have been calculated at three conditions and compared with measurements made on a model of the vane tested in annular cascade in the Isentropic Light Piston Facility at DERA, Pyestock. The NGV Mach numbers, Reynolds numbers and geometry are fully representative of engine conditions. Design condition data has previously been presented by Harvey and Jones (1990). Off-design data is presented here for the first time. In the areas of highest heat transfer the calculated heat transfer rates are shown to be within 20% of the measured values at all three conditions. Particular emphasis is placed on the use of wall functions in the calculations with which relatively coarse grids (of around 140,000 nodes) can be used to keep computational run times sufficiently low for engine design purposes.

scholarly journals Numerical Simulation of Slip effect on Lid-Driven Cavity Flow Problem for High Reynolds Number: Vorticity – Stream Function Approach

2021 ◽  
Vol 8 (3) ◽  
pp. 418-424
Author(s):  
Syed Fazuruddin ◽  
Seelam Sreekanth ◽  
G. Sankara Sekhar Raju
Keyword(s):  
Reynolds Number ◽  
Stream Function ◽  
Stokes Equations ◽  
Cavity Flow ◽  
Partial Slip ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Driven Cavity ◽  
Slip Conditions ◽  
Driven Cavity Flow

Incompressible 2-D Navier-stokes equations for various values of Reynolds number with and without partial slip conditions are studied numerically. The Lid-Driven cavity (LDC) with uniform driven lid problem is employed with vorticity - Stream function (VSF) approach. The uniform mesh grid is used in finite difference approximation for solving the governing Navier-stokes equations and developed MATLAB code. The numerical method is validated with benchmark results. The present work is focused on the analysis of lid driven cavity flow of incompressible fluid with partial slip conditions (imposed on side walls of the cavity). The fluid flow patterns are studied with wide range of Reynolds number and slip parameters.

Electric Field Effects on Natural Convection in Enclosures

1986 ◽  
Vol 108 (4) ◽  
pp. 749-754 ◽  
Author(s):  
D. A. Nelson ◽  
E. J. Shaughnessy
Keyword(s):  
Heat Transfer ◽  
Electric Field ◽  
Convective Heat Transfer ◽  
Heat Transfer Rate ◽  
Convective Heat ◽  
Transfer Rate ◽  
Stokes Equations ◽  
Experimental Studies ◽  
Navier Stokes ◽  
First Order Theory

The enhancement of convective heat transfer by an electric field is but one aspect of the complex thermoelectric phenomena which arise from the interaction of fluid dynamic and electric fields. Our current knowledge of this area is limited to a very few experimental studies. There has been no formal analysis of the basic coupling modes of the Navier–Stokes and Maxwell equations which are developed in the absence of any appreciable magnetic fields. Convective flows in enclosures are particularly sensitive because the limited fluid volumes, recirculation, and generally low velocities allow the relatively weak electric body force to exert a significant influence. In this work, the modes by which the Navier–Stokes equations are coupled to Maxwell’s equations of electrodynamics are reviewed. The conditions governing the most significant coupling modes (Coulombic forces, Joule heating, permittivity gradients) are then derived within the context of a first-order theory of electrohydrodynamics. Situations in which these couplings may have a profound effect on the convective heat transfer rate are postulated. The result is an organized framework for controlling the heat transfer rate in enclosures.

Sign in / Sign up

Export Citation Format

Share Document