scholarly journals Numerical Simulation on Deflecting Hydraulic Fracture with Refracturing Using Extended Finite Element Method

Energies ◽  
2019 ◽  
Vol 12 (11) ◽  
pp. 2044
Author(s):  
Jianxiong Li ◽  
Shiming Dong ◽  
Wen Hua ◽  
Yang Yang ◽  
Xiaolong Li
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Extended Finite Element Method ◽  
Deflection Angle ◽  
Propagation Path ◽  
Fluid Viscosity ◽  
Extended Finite Element ◽  
Initial Location ◽  
Initial Fracture ◽  
Element Method

Refracturing is a key technology in enhancing the conductivity of fractures from hydraulically-fractured wells. However, the deflecting mechanism of the diverting fracture is still unclear. In this paper, a fully coupled seepage-stress model based on the extended finite element method (XFEM) was developed to realize the deflection mechanism of the refracturing fractures. The modified construction of refracturing was then verified by laboratory experiments. Furthermore, two new deflection angles considering the influence area along initial fracture length were introduced to evaluate the refracturing. The numerical results demonstrated that: (1) lower stress difference, larger perforation angle and longer perforation depth can lead to a higher deflection angle, thereby a more curving propagation path of the diverting fracture; (2) increasing injection rate or fluid viscosity can significantly enhance the diverting behavior; and (3) an initial location near the root of the initial fracture results in a larger value of the deflection angle, which is preferred for far-field refracturing. The conclusions in this study can be a systematic guide for the parameter optimization in refracturing treatment.

Analysis of Multi-Crack Growth in Asphalt Pavement Based on Extended Finite Element Method

2012 ◽  
Vol 588-589 ◽  
pp. 1926-1929
Author(s):  
Yu Zhou Sima ◽  
Fu Zhou Wang
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Crack Growth ◽  
Extended Finite Element Method ◽  
Asphalt Pavement ◽  
Finite Element Approximation ◽  
Propagation Path ◽  
Element Approximation ◽  
Extended Finite Element ◽  
Element Method

An extended finite element method (XFEM) for multiple crack growth in asphalt pavement is described. A discontinuous function and the two-dimensional asymptotic crack-tip displacement fields are added to the finite element approximation to account for the crack using the notion of partition of unity. This enables the domain to be modeled by finite element with no explicit meshing of the crack surfaces. Computational geometry issues associated with the representation of the crack and the enrichment of the finite element approximation are discussed. Finally, the propagation path of the cracks in asphalt pavement under different load conditions is presented.

scholarly journals Simulation of Bending Fracture Process of Asphalt Mixture Semicircular Specimen with Extended Finite Element Method

2018 ◽  
Vol 2018 ◽  
pp. 1-8 ◽  
Author(s):  
Tian Xiaoge ◽  
Ren Zhang ◽  
Zhen Yang ◽  
Yantian Chu ◽  
Shaohua Zhen ◽  
...  
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Fracture Process ◽  
Extended Finite Element Method ◽  
Stress Component ◽  
Propagation Path ◽  
Extended Finite Element ◽  
Simulation Results ◽  
Loading Modes ◽  
Element Method

In order to numerically simulate the whole fracture process including the initiation and propagation of crack in asphalt concrete semicircular specimens under external force, the extended finite element method (XFEM) was adopted considering the shortcomings of the conventional finite element method (FEM). The fracture processes of the semicircular specimens under 5 kinds of loading modes, Me, were analyzed, and the simulation results were compared to the actual fracture paths in the actual specimens. The results indicated that the critical effective stress intensity factor will decrease first and then increase with the increase of Me, and the XFEM simulation results are similar to that of the actual specimens in crack initiation angle and propagation path in the 5 different loading modes. It is proved that the XFEM is very effective in simulating the fracture process and has obvious advantages compared with the FEM. According to the stress state at the crack tip, the initiation angle and its propagation paths were analyzed, and it was pointed out that the increase of the shear stress component caused the crack initial angle to increase with the increase of Me.

scholarly journals A mesh-independent framework for crack tracking in elastodamaging materials through the regularized extended finite element method

2021 ◽  
Author(s):  
Elena Benvenuti ◽  
Nicola Orlando
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Damage Evolution ◽  
Extended Finite Element Method ◽  
Mesh Adaptivity ◽  
Extended Finite Element ◽  
Evolution Law ◽  
Crack Paths ◽  
Original Crack ◽  
Element Method

AbstractWe propose a formulation for tracking general crack paths in elastodamaging materials without mesh adaptivity and broadening of the damage band. The idea is to treat in a unified way both the damaging process and the development of displacement discontinuities by means of the regularized finite element method. With respect to previous authors’ contributions, a novel damage evolution law and an original crack tracking framework are proposed. We face the issue of mesh objectivity through several two-dimensional tests, obtaining smooth crack paths and reliable structural results.

scholarly journals An Extended Finite Element Method (XFEM) Study on the Elastic T-Stress Evaluations for a Notch in a Pipe Steel Exposed to Internal Pressure

Mathematics ◽  
2021 ◽  
Vol 9 (5) ◽  
pp. 507
Author(s):  
K. Yakoubi ◽  
S. Montassir ◽  
Hassane Moustabchir ◽  
A. Elkhalfi ◽  
Catalin Iulian Pruncu ◽  
...  
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Internal Pressure ◽  
Extended Finite Element Method ◽  
Research Study ◽  
Extended Finite Element ◽  
T Stress ◽  
Cracked Structures ◽  
Element Method

The work investigates the importance of the K-T approach in the modelling of pressure cracked structures. T-stress is the constant in the second term of the Williams expression; it is often negligible, but recent literature has shown that there are cases where T-stress plays the role of opening the crack, also T-stress improves elastic modeling at the point of crack. In this research study, the most important effects of the T-stress are collected and analyzed. A numerical analysis was carried out by the extended finite element method (X-FEM) to analyze T-stress in an arc with external notch under internal pressure. The different stress method (SDM) is employed to calculate T-stress. Moreover, the influence of the geometry of the notch on the biaxiality is also examined. The biaxiality gave us a view on the initiation of the crack. The results are extended with a comparison to previous literature to validate the promising investigations.

Application of Extended Finite Element Method (XFEM) to Stress Intensity Factor Calculations

2015 ◽  
Author(s):  
Do-Jun Shim ◽  
Mohammed Uddin ◽  
Sureshkumar Kalyanam ◽  
Frederick Brust ◽  
Bruce Young
Keyword(s):  
Finite Element Method ◽  
Stress Intensity Factor ◽  
Finite Element ◽  
Stress Intensity ◽  
Intensity Factor ◽  
Degrees Of Freedom ◽  
Extended Finite Element Method ◽  
Partition Of Unity ◽  
Extended Finite Element ◽  
Element Method

The extended finite element method (XFEM) is an extension of the conventional finite element method based on the concept of partition of unity. In this method, the presence of a crack is ensured by the special enriched functions in conjunction with additional degrees of freedom. This approach also removes the requirement for explicitly defining the crack front or specifying the virtual crack extension direction when evaluating the contour integral. In this paper, stress intensity factors (SIF) for various crack types in plates and pipes were calculated using the XFEM embedded in ABAQUS. These results were compared against handbook solutions, results from conventional finite element method, and results obtained from finite element alternating method (FEAM). Based on these results, applicability of the ABAQUS XFEM to stress intensity factor calculations was investigated. Discussions are provided on the advantages and limitations of the XFEM.

Sign in / Sign up

Export Citation Format

Share Document