scholarly journals Economic Feasibility of Wave Energy Farms in Portugal

Energies ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 3149 ◽  
Author(s):  
Laura Castro-Santos ◽  
Dina Silva ◽  
A. Bento ◽  
Nadia Salvação ◽  
C. Guedes Soares
Keyword(s):  
Wave Energy ◽  
Net Present Value ◽  
Economic Feasibility ◽  
Wave Energy Converter ◽  
Internal Rate Of Return ◽  
Energy Converter ◽  
Wave Energy Converters ◽  
Cost Of Energy ◽  
Offshore Wave ◽  
The Waves

This paper develops a methodology to determine the economic feasibility of implementing offshore wave energy farms on the Portuguese continental coast. This methodology follows several phases: the geographic phase, the energy phase, the economic phase, and the restrictions phase. First, in the geographic phase, the height and the period of the waves, the bathymetry, the distance from the farm to the shore, from farm to shipyard, and from farm to port, are calculated. In the energy phase the energy produced by each wave energy converter is determined, and in the economic phase, the parameters calculated in the previous phases are used as input to find the economic parameters. Finally, in the restrictions phase, a limitation by the bathymetry will be added to the economic maps, whose value will be different depending on the floating offshore wave energy converter (WEC). In this study, three wave energy converters have been considered, Pelamis, AquaBuOY, and Wave Dragon, and several scenarios for electric tariffs have been taken into account. The results obtained indicate what the best WEC is for this study in terms of its levelized cost of energy (LCOE), internal rate of return (IRR), and net present value (NPV), and where the best area is to install wave energy farms.

scholarly journals The Economic Feasibility of Floating Offshore Wave Energy Farms in the North of Spain

Energies ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 806 ◽  
Author(s):  
Laura Castro-Santos ◽  
Ana Bento ◽  
Carlos Guedes Soares
Keyword(s):  
Wave Energy ◽  
Net Present Value ◽  
Energy Resource ◽  
Economic Feasibility ◽  
Wave Energy Converter ◽  
Energy Converter ◽  
The North ◽  
Cost Of Energy ◽  
Offshore Wave ◽  
North Of Spain

A technique to analyse the economic viability of offshore farms composed of wave energy converters is proposed. Firstly, the inputs, whose value will be considered afterwards in the economic step, was calculated using geographic information software. Secondly, the energy produced by each wave converter was calculated. Then the economic factors were computed. Finally, the restriction that considers the depth of the region (bathymetry) was put together with the economic outputs, whose value depends on the floating Wave Energy Converter (WEC). The method proposed was applied to the Cantabric and Atlantic coasts in the north of Spain, a region with a good offshore wave energy resource. In addition, three representative WECs were studied: Pelamis, AquaBuoy and Wave Dragon; and five options for electric tariffs were analysed. Results show the Wave Energy Converter that has the best results regarding its LCOE (Levelized Cost of Energy), IRR (Internal Rate of Return) and NPV (Net Present Value), and which area is best for the development of a wave farm.

scholarly journals A broadbanded pressure differential wave energy converter based on dielectric elastomer generators

2021 ◽  
Author(s):  
Michele Righi ◽  
Giacomo Moretti ◽  
David Forehand ◽  
Lorenzo Agostini ◽  
Rocco Vertechy ◽  
...  
Keyword(s):  
Wave Energy ◽  
Large Deformations ◽  
Dielectric Elastomer ◽  
Wave Energy Converter ◽  
Pressure Differential ◽  
Design Stage ◽  
Small Scale ◽  
Energy Converter ◽  
Wide Range ◽  
The Waves

AbstractDielectric elastomer generators (DEGs) are a promising option for the implementation of affordable and reliable sea wave energy converters (WECs), as they show considerable promise in replacing expensive and inefficient power take-off systems with cheap direct-drive generators. This paper introduces a concept of a pressure differential wave energy converter, equipped with a DEG power take-off operating in direct contact with sea water. The device consists of a closed submerged air chamber, with a fluid-directing duct and a deformable DEG power take-off mounted on its top surface. The DEG is cyclically deformed by wave-induced pressure, thus acting both as the power take-off and as a deformable interface with the waves. This layout allows the partial balancing of the stiffness due to the DEG’s elasticity with the negative hydrostatic stiffness contribution associated with the displacement of the water column on top of the DEG. This feature makes it possible to design devices in which the DEG exhibits large deformations over a wide range of excitation frequencies, potentially achieving large power capture in a wide range of sea states. We propose a modelling approach for the system that relies on potential-flow theory and electroelasticity theory. This model makes it possible to predict the system dynamic response in different operational conditions and it is computationally efficient to perform iterative and repeated simulations, which are required at the design stage of a new WEC. We performed tests on a small-scale prototype in a wave tank with the aim of investigating the fluid–structure interaction between the DEG membrane and the waves in dynamical conditions and validating the numerical model. The experimental results proved that the device exhibits large deformations of the DEG power take-off over a broad range of monochromatic and panchromatic sea states. The proposed model demonstrates good agreement with the experimental data, hence proving its suitability and effectiveness as a design and prediction tool.

scholarly journals Optimizing the Power Take Off of a Wave Energy Converter With Regard to the Wave Climate

2005 ◽  
Vol 128 (1) ◽  
pp. 56-64 ◽  
Author(s):  
Gaelle Duclos ◽  
Aurelien Babarit ◽  
Alain H. Clément
Keyword(s):  
Wave Energy ◽  
Simple Wave ◽  
Wave Climate ◽  
Wave Energy Converter ◽  
Optimal Parameters ◽  
Energy Converter ◽  
Wave Energy Converters ◽  
Classical Wave ◽  
Project Site ◽  
Wave Conditions

Considered as a source of renewable energy, wave is a resource featuring high variability at all time scales. Furthermore wave climate also changes significantly from place to place. Wave energy converters are very often tuned to suit the more frequent significant wave period at the project site. In this paper we show that optimizing the device necessitates accounting for all possible wave conditions weighted by their annual occurrence frequency, as generally given by the classical wave climate scatter diagrams. A generic and very simple wave energy converter is considered here. It is shown how the optimal parameters can be different considering whether all wave conditions are accounted for or not, whether the device is controlled or not, whether the productive motion is limited or not. We also show how they depend on the area where the device is to be deployed, by applying the same method to three sites with very different wave climate.

Optimization of Mooring Configuration Parameters of Floating Wave Energy Converters

2011 ◽  
Author(s):  
Pedro C. Vicente ◽  
Anto´nio F. O. Falca˜o ◽  
Paulo A. P. Justino
Keyword(s):  
Wave Energy ◽  
Oil And Gas ◽  
Wave Energy Converter ◽  
Domain Model ◽  
Floating Point ◽  
Mooring System ◽  
Energy Converter ◽  
Energy Devices ◽  
Wave Energy Converters ◽  
Energy Converters

Floating point absorbers devices are a large class of wave energy converters for deployment offshore, typically in water depths between 40 and 100m. As floating oil and gas platforms, the devices are subject to drift forces due to waves, currents and wind, and therefore have to be kept in place by a proper mooring system. Although similarities can be found between the energy converting systems and floating platforms, the mooring design requirements will have some important differences between them, one of them associated to the fact that, in the case of a wave energy converter, the mooring connections may significantly modify its energy absorption properties by interacting with its oscillations. It is therefore important to examine what might be the more suitable mooring design for wave energy devices, according to the converters specifications. When defining a mooring system for a device, several initial parameters have to be established, such as cable material and thickness, distance to the mooring point on the bottom, and which can influence the device performance in terms of motion, power output and survivability. Different parameters, for which acceptable intervals can be established, will represent different power absorptions, displacements from equilibrium position, load demands on the moorings and of course also different costs. The work presented here analyzes what might be, for wave energy converter floating point absorber, the optimal mooring configuration parameters, respecting certain pre-established acceptable intervals and using a time-domain model that takes into account the non-linearities introduced by the mooring system. Numerical results for the mooring forces demands and also motions and absorbed power, are presented for two different mooring configurations for a system consisting of a hemispherical buoy in regular waves and assuming a liner PTO.

scholarly journals Loads on a Point-Absorber Wave Energy Converter in Regular and Focused Extreme Wave Events

2020 ◽  
Author(s):  
Eirini Katsidoniotaki ◽  
Edward Ransley ◽  
Scott Brown ◽  
Johannes Palm ◽  
Jens Engström ◽  
...  
Keyword(s):  
Wave Energy ◽  
Wave Train ◽  
Offshore Structures ◽  
Wave Energy Converter ◽  
Extreme Waves ◽  
Extreme Wave ◽  
Energy Converter ◽  
Point Absorber ◽  
Wave Energy Converters ◽  
Extreme Loads

Abstract Accurate modeling and prediction of extreme loads for survivability is of crucial importance if wave energy is to become commercially viable. The fundamental differences in scale and dynamics from traditional offshore structures, as well as the fact that wave energy has not converged around one or a few technologies, implies that it is still an open question how the extreme loads should be modeled. In recent years, several methods to model wave energy converters in extreme waves have been developed, but it is not yet clear how the different methods compare. The purpose of this work is the comparison of two widely used approaches when studying the response of a point-absorber wave energy converter in extreme waves, using the open-source CFD software OpenFOAM. The equivalent design-waves are generated both as equivalent regular waves and as focused waves defined using NewWave theory. Our results show that the different extreme wave modeling methods produce different dynamics and extreme forces acting on the system. It is concluded that for the investigation of point-absorber response in extreme wave conditions, the wave train dynamics and the motion history of the buoy are of high importance for the resulting buoy response and mooring forces.

Design and Potential Application of Small Scale Wave Energy Converter

2017 ◽  
Author(s):  
Tunde O. Aderinto ◽  
Francisco Haces-Fernandez ◽  
Hua Li
Keyword(s):  
Wave Energy ◽  
Energy Production ◽  
Energy Resource ◽  
Appropriate Technology ◽  
Wave Energy Converter ◽  
Small Scale ◽  
Ocean Energy ◽  
Energy Converter ◽  
Wave Energy Converters ◽  
Wave Properties

Although theoretical available wave energy is higher than most of ocean energy sources, the commercial utilization of wave energy is much slower than other ocean energy sources. The difficulty of integration with the electrical grid system and the challenges of the installation, operation and maintenance of large energy generation and transmission systems are the major reasons. Even though there are successfully tested models of wave energy converters, the fact that wave energy is directly affected by wave height and wave period makes the actual wave energy output with high variation and difficult to be predicted. And most of the previous studies on wave energy and its utilization have focused on the large scale energy production that can be integrated into a power grid system. In this paper, the authors identify and discuss stand-alone wave energy converter systems and facilities that are not connected to the electricity grid with focus on small scale wave energy systems as potential source of energy. For the proper identification, qualification and quantification of wave energy resource potential, wave properties such as wave height and period need to be characterized. This is used to properly determine and predict the probability of the occurrence of these wave properties at particular locations, which enables the choice of product design, installation, operation and maintenance to effectively capture wave energy. Meanwhile, the present technologies available for wave energy converters can be limited by location (offshore, nearshore or shoreline). Therefore, the potential applications of small scale stand-alone wave energy converter are influenced by the demand, location of the need and the appropriate technology to meet the identified needs. The paper discusses the identification of wave energy resource potentials, the location and appropriate technology suitable for small scale wave energy converter. Two simplified wave energy converter designs are created and simulated under real wave condition in order to estimate the energy production of each design.

Design Load Analysis for Wave Energy Converters

2018 ◽  
Author(s):  
Jennifer van Rij ◽  
Yi-Hsiang Yu ◽  
Ryan G. Coe
Keyword(s):  
Wave Energy ◽  
Design Guidelines ◽  
Wave Energy Converter ◽  
Energy Converter ◽  
Stage Design ◽  
Design Load ◽  
Wave Energy Converters ◽  
Order Of Magnitude ◽  
Design Loads ◽  
Computationally Intensive

This study demonstrates a systematic methodology for establishing the design loads of a wave energy converter. The proposed design load methodology incorporates existing design guidelines, where they exist, and follows a typical design progression; namely, advancing from many, quick, order-of-magnitude accurate, conceptual stage design computations to a few, computationally intensive, high-fidelity, design validation simulations. The goal of the study is to streamline and document this process based on quantitative evaluations of the design loads’ accuracy at each design step and consideration for the computational efficiency of the entire design process. For the wave energy converter, loads, and site conditions considered, this study demonstrates an efficient and accurate methodology of evaluating the design loads.

Coupled Multi-Phase CFD and Transient Mooring Analysis of the Floating Wave Energy Converter OWEL

2013 ◽  
Author(s):  
Rachel Nicholls-Lee ◽  
Adam Walker ◽  
Simon Hindley ◽  
Richard Argall
Keyword(s):  
Wave Energy ◽  
Dynamic Environment ◽  
Cfd Analysis ◽  
Heavy Duty ◽  
Operational Parameters ◽  
Energy Converter ◽  
Aggressive Environment ◽  
Wave Energy Converters ◽  
Offshore Wave ◽  
Multi Phase

Floating wave energy converters are surface based thus facilitating installation and maintenance. They tend to be moored offshore and consequently have less of an impact than other devices both visually and audibly. Mooring these devices is a challenging task, as not only are they subject to drift forces due to the aggressive environment, but they are also designed to operate at their resonant frequency in order to obtain as much power as possible. Such operational parameters require heavy duty mooring systems, capable of coping with the dynamic environment. These moorings will, in turn, affect the performance of the device by restraining the motions and thus modifying the energy absorption characteristics. In this paper a free floating representation of the Offshore Wave Energy Ltd. device (OWEL) has been modeled in RANS CFD in order to obtain initial mooring loads. Subsequently, a preliminary mooring arrangement for OWEL was developed, and using these loads it was modeled using OrcaFlex. The dynamic, non-linear loads were then coupled to a fully transient, multiphase CFD analysis of the device in order to obtain performance characteristics for further detailed design. The numerical results have been compared to results obtained through physical model scale tests of the device and show a good degree of correlation.

scholarly journals Initial conceptual demonstration of control co-design for WEC optimization

2020 ◽  
Author(s):  
Ryan G. Coe ◽  
Giorgio Bacelli ◽  
Sterling Olson ◽  
Vincent S. Neary ◽  
Mathew B. R. Topper
Keyword(s):  
Design Optimization ◽  
Wave Energy ◽  
Wave Energy Converter ◽  
Short Paper ◽  
Energy Converter ◽  
Matlab Toolbox ◽  
Wave Energy Converters ◽  
Practical Engineering ◽  
Converter Design ◽  
Energy Converters

While some engineering fields have benefited from systematic design optimization studies, wave energy converters have yet to successfully incorporate such analyses into practical engineering workflows. The current iterative approach to wave energy converter design leads to suboptimal solutions. This short paper presents an open-source MATLAB toolbox for performing design optimization studies on wave energy converters where power take-off behavior and realistic constraints can be easily included. This tool incorporates an adaptable control co-design approach, in that a constrained optimal controller is used to simulate device dynamics and populate an arbitrary objective function of the user's choosing. A brief explanation of the tool's structure and underlying theory is presented. In order to demonstrate the capabilities of the tool, verify its functionality, and begin to explore some basic wave energy converter design relationships, three conceptual case studies are presented. In particular, the importance of considering (and constraining) the magnitudes of device motion and forces is shown.<br>

scholarly journals Numerical Study on the Optimization of Hydrodynamic Performance of Oscillating Buoy Wave Energy Converter

2021 ◽  
Vol 28 (1) ◽  
pp. 48-58
Author(s):  
Wenbin Lai ◽  
Yonghe Xie ◽  
Detang Li
Keyword(s):  
Wave Energy ◽  
Numerical Study ◽  
Energy Conversion Efficiency ◽  
Absorption Efficiency ◽  
Wave Energy Converter ◽  
Hydrodynamic Performance ◽  
Energy Converter ◽  
Physical Experiments ◽  
Working Principle ◽  
The Waves

Abstract The oscillating buoy wave energy converter (OBWEC) captures wave energy through the undulating movement of the buoy in the waves. In the process of capturing wave energy, the hydrodynamic performance of the buoy plays an important role. This paper designed the “Haida No. 1” OBWEC, in which the buoy adopts a form of swinging motion. In order to further improve the hydrodynamic performance of the buoy, a 2D numerical wave tank (NWT) model is established using ADINA software based on the working principle of the device. According to the motion equation of the buoy in the waves, the influence of the buoy shape, arm length, tilt angle, buoy draft, buoy width, wave height and Power Take-off (PTO) damping on the hydrodynamic performance of the buoy is studied. Finally, a series of physical experiments are performed on the device in a laboratory pool. The experimental results verify the consistency of the numerical results. The research results indicate that the energy conversion efficiency of the device can be improved by optimizing the hydrodynamic performance of the buoy. However, the absorption efficiency of a single buoy for wave energy is limited, so it is very difficult to achieve full absorption of wave energy.

Sign in / Sign up

Export Citation Format

Share Document