scholarly journals Analysis of Torque Ripple and Cogging Torque Reduction in Electric Vehicle Traction Platform Applying Rotor Notched Design

Energies ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 3053 ◽  
Author(s):  
Myeong-Hwan Hwang ◽  
Hae-Sol Lee ◽  
Hyun-Rok Cha
Keyword(s):  
Permanent Magnet ◽  
Torque Ripple ◽  
Field Analysis ◽  
Permanent Magnet Motors ◽  
Primary Methods ◽  
Cogging Torque ◽  
Electric Cars ◽  
Electric Control ◽  
Interior Permanent Magnet ◽  
Rotor Shape

Drive motors, which are used in the drive modules of electric cars, are interior permanent magnet motors. These motors tend to have high cogging torque and torque ripple, which leads to the generation of high vibration and noise. Several studies have attempted to determine methods of reducing the cogging torque and torque ripple in interior permanent magnet motors. The primary methods of reducing the cogging torque involve either electric control or mechanical means. Herein, the authors focused on a mechanical method to reduce the cogging torque and torque ripple. Although various methods of reducing vibration and noise mechanically exist, there is no widely-known comparative analyses on reducing the vibration and noise by designing a notched rotor shape. Therefore, this paper proposes a method of reducing vibration and noise mechanically by designing a notched rotor shape. In the comparative analysis performed herein, the motor stator and rotor were set to be the same size, and electromagnetic field analysis was performed to determine a notch shape that is suitable for the rotor and that generates reasonable vibration and noise.

Design of rotor shape for reducing torque ripple in interior permanent magnet motors

2012 ◽  
Vol 39 (1-4) ◽  
pp. 881-887 ◽  
Author(s):  
Un-Jae Seo ◽  
Yon-do Chun ◽  
Jae-Hak Choi ◽  
Pil-Wan Han ◽  
Dae-Hyun Koo
Keyword(s):  
Permanent Magnet ◽  
Torque Ripple ◽  
Permanent Magnet Motors ◽  
Interior Permanent Magnet ◽  
Rotor Shape

The Method Pole of Width Modulation Reducing Cogging Torque in Permanent Magnet Motor

2012 ◽  
Vol 433-440 ◽  
pp. 4201-4206
Author(s):  
Yue Jun An ◽  
Wen Qiang Zhao ◽  
Li Ping Xue ◽  
Hong Liang Wen ◽  
Guo Ming Liu
Keyword(s):  
Permanent Magnet ◽  
Torque Ripple ◽  
Experimental Result ◽  
Testing System ◽  
Permanent Magnet Motors ◽  
Permanent Magnet Motor ◽  
Surface Type ◽  
Angle Sensor ◽  
Cogging Torque ◽  
Simulation Results

Cogging torque is one of the most important parameters of permanent magnet motors, which causes torque ripple, vibration and noise. This paper describes the mechanism of cogging torque, introduces several methods of reducing cogging torque and points out the advantage of novel magnet arrayed permanent magnet motor in reducing cogging torque. Ansoft software is used to build the simulation of conventional surface-type permanent magnet motor and novel magnet arrayed permanent magnet motor and to calculate their cogging torque. a cogging torque testing system which included the angle sensor, permanent magnet motor, torque wrenches and other components are tested two different structures motors’ cogging torque .The experimental result is consistent with the simulation results, it shows that the method of novel magnet arrayed permanent magnet motor reducing cogging torque is correct. The new method compare with the same specification on the surface of permanent magnet motor can reduce more cogging torque.

scholarly journals Performances analysis of interior permanent magnet motors having different rotor iron pole shapes

2021 ◽  
Vol 12 (4) ◽  
pp. 1999
Author(s):  
Ahlam Luaibi Shuraiji ◽  
Buraq Abdulhadi Awad
Keyword(s):  
Permanent Magnet ◽  
Torque Ripple ◽  
High Energy ◽  
Electromagnetic Torque ◽  
Permanent Magnet Motors ◽  
Element Analysis ◽  
Magnet Material ◽  
Interior Permanent Magnet ◽  
Rotor Pole ◽  
Permanent Magnet Material

<p><span lang="EN-US">Interior permanent magnet motors (IPMMs) have been increasing in popularity, since the emergence of permanent magnet material with high energy products, i.e. rare earth permanent magnet material. This paper analyses the performances of IPMMs having different rotor iron pole shapes including eccentric, sinusoidal and sinusoidal with 3th order harmonic injected rotor pole arc shapes IPMMs. Cogging torque, static torque, torque ripple, torque-speed and power-speed curves of the mentioned motors have been compared. It must be noted that the mentioned motors have been designed with the same stator, PM shape and the same dimensions, in order to highlight the effect of the rotor pole arc shape on the performance of the such motors. Two-dimensional (2D) finite element analysis (FEA) has been utilized to design and analyze the mentioned machines. It has been found that rotor iron pole shape of the IPM has notably influence on the machine performance, practically on output electromagnetic torque and its ripple. The highest value of average electromagnetic torque as well as torque capability in the constant torque reign is delivered by 3th order harmonic injected rotor pole arc shapes machine, while the lowest torque ripple is obtained by the sinusoidal rotor pole arc machine.</span></p>

The Method of Pole Width Modulation Reducing Cogging Torque in Permanent Magnet Motor

2011 ◽  
Vol 383-390 ◽  
pp. 1369-1375
Author(s):  
Yue Jun An ◽  
Wen Qiang Zhao ◽  
Li Ping Xue ◽  
Hong Liang Wen ◽  
Guo Ming Liu
Keyword(s):  
Permanent Magnet ◽  
Torque Ripple ◽  
Experimental Result ◽  
Testing System ◽  
Permanent Magnet Motors ◽  
Permanent Magnet Motor ◽  
Surface Type ◽  
Angle Sensor ◽  
Cogging Torque ◽  
Simulation Results

Cogging torque is one of the most important parameters of permanent magnet motors, which causes torque ripple, vibration and noise. This paper describes the mechanism of cogging torque, introduces several methods of reducing cogging torque and points out the advantage of novel magnet arrayed permanent magnet motor in reducing cogging torque. Ansoft software is used to build the simulation of conventional surface-type permanent magnet motor and novel magnet arrayed permanent magnet motor and to calculate their cogging torque. a cogging torque testing system which included the angle sensor, permanent magnet motor, torque wrenches and other components are tested two different structures motors’ cogging torque .The experimental result is consistent with the simulation results, it shows that the method of novel magnet arrayed permanent magnet motor reducing cogging torque is correct. The new method compare with the same specification on the surface of permanent magnet motor can reduce more cogging torque.

scholarly journals Design and Analysis of Rotor Shapes for IPM Motors in EV Power Traction Platforms

Energies ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 2601 ◽  
Author(s):  
Myeong-Hwan Hwang ◽  
Jong-Ho Han ◽  
Dong-Hyun Kim ◽  
Hyun-Rok Cha
Keyword(s):  
Permanent Magnet ◽  
Electric Vehicles ◽  
High Power ◽  
High Efficiency ◽  
Torque Ripple ◽  
Hybrid Vehicles ◽  
Recent Increase ◽  
Interior Permanent Magnet ◽  
Rotor Shape ◽  
Two Hybrid

The recent increase in the use of permanent magnet rotor motors underlines the importance of designing a rotor with an interior permanent magnet (IPM) structure, high power, and high efficiency. This study analyzed the rotor shapes of IPM motors for electric vehicles. Five types of motor rotors for automobiles were analyzed, including two hybrid vehicles. In order to minimize the number of variables in the analysis, the size of the motor stators was fixed and only the rotor shapes were modified to compare torque, torque ripple, efficiency and back-electromotive voltage. When the motor properties were compared as a function of rotor shape, the rotor shape with the smallest magnet volume exhibited excellent results for torque, efficiency and torque ripple.

Sign in / Sign up

Export Citation Format

Share Document