scholarly journals Risk Assessment Method of UHV AC/DC Power System under Serious Disasters

Energies ◽  
2016 ◽  
Vol 10 (1) ◽  
pp. 13 ◽  
Author(s):  
Rishang Long ◽  
Jianhua Zhang
Energies ◽  
2019 ◽  
Vol 12 (16) ◽  
pp. 3040
Author(s):  
Qi Wang ◽  
Dasong Sun ◽  
Jianxiong Hu ◽  
Yi Wu ◽  
Ji Zhou ◽  
...  

High distributed generation (DG) penetration makes the traditional method of equalizing the distribution power system (DPS) to the PQ load bus in the risk assessment of the transmission power system (TPS) no longer applicable. This paper proposes a risk assessment method for an integrated transmission–distribution system that considers the reactive power regulation capability of the DGs. Based on the DG’s characteristics and network constraints, the regulation capacity is mapped to the boundary buses of the distribution networks. Coordinating the relationship between reactive power and active power, the utilization of the regulation capacity is maximized to reduce the load shedding in the fault analysis of the TPS. Simulation results in the integrated transmission–distribution system illustrate that the effective use of the regulation capacity of the DPS can reduce the risk of the TPS. The method can be applied to the reactive power sources planning and dispatching of power system.


2014 ◽  
Vol 556-562 ◽  
pp. 6665-6668
Author(s):  
Xiao Jun Lu ◽  
Kai Wen Zeng ◽  
Shi Wu Liao ◽  
Jin Yu Wen ◽  
En Lu ◽  
...  

A set of blackout risk assessment indexes is established according to Electricity Accident (Incident) Investigation Procedures of China Southern Power Grid (CSPG) (pilot) and Guide on Operational Risk Evaluation of CSPG, which can calculate risk values of electricity accidents (incidents). The calculation process is discussed in detail. Based on the proposed indexes and OPA blackout model, a blackout risk assessment method for power system is put forward, with which blackout risk for all 500kV buses in Guangdong Power Grid are evaluated. Weak areas in power system are identified and their inducements are analyzed. The identification results accord with actual system long-term operation experience, which verifies the correctness of the indexes and method.


2012 ◽  
Vol 446-449 ◽  
pp. 3015-3018 ◽  
Author(s):  
Jing Feng ◽  
Ying Wang ◽  
Xian Yong Xiao

The synthetic risk assessment method incorporating the severity and the possibility is used to identify the catastrophic event sequences in power system. The weight setting of each severity index is determined by the proposed entropy weight method. Comparing with traditional methods, the entropy weight method can determine the weight coefficients objectively. The simulation results for the WSCC-9 buses system have proved the validity of the proposed method. This method can be used in the practice power system.


2020 ◽  
Vol 34 (5) ◽  
pp. 627-640 ◽  
Author(s):  
Shi Xianwu ◽  
Qiu Jufei ◽  
Chen Bingrui ◽  
Zhang Xiaojie ◽  
Guo Haoshuang ◽  
...  

Author(s):  
Zuzhen Ji ◽  
Dirk Pons ◽  
John Pearse

Successful implementation of Health and Safety (H&S) systems requires an effective mechanism to assess risk. Existing methods focus primarily on measuring the safety aspect; the risk of an accident is determined based on the product of severity of consequence and likelihood of the incident arising. The health component, i.e., chronic harm, is more difficult to assess. Partially, this is due to both consequences and the likelihood of health issues, which may be indeterminate. There is a need to develop a quantitative risk measurement for H&S risk management and with better representation for chronic health issues. The present paper has approached this from a different direction, by adopting a public health perspective of quality of life. We have then changed the risk assessment process to accommodate this. This was then applied to a case study. The case study showed that merely including the chronic harm scales appeared to be sufficient to elicit a more detailed consideration of hazards for chronic harm. This suggests that people are not insensitive to chronic harm hazards, but benefit from having a framework in which to communicate them. A method has been devised to harmonize safety and harm risk assessments. The result was a comprehensive risk assessment method with consideration of safety accidents and chronic health issues. This has the potential to benefit industry by making chronic harm more visible and hence more preventable.


Sign in / Sign up

Export Citation Format

Share Document