scholarly journals A Novel FastSLAM Framework Based on 2D Lidar for Autonomous Mobile Robot

Electronics ◽  
2020 ◽  
Vol 9 (4) ◽  
pp. 695
Author(s):  
Xu Lei ◽  
Bin Feng ◽  
Guiping Wang ◽  
Weiyu Liu ◽  
Yalin Yang

The autonomous navigation and environment exploration of mobile robots are carried out on the premise of the ability of environment sensing. Simultaneous localisation and mapping (SLAM) is the key algorithm in perceiving and mapping an environment in real time. FastSLAM has played an increasingly significant role in the SLAM problem. In order to enhance the performance of FastSLAM, a novel framework called IFastSLAM is proposed, based on particle swarm optimisation (PSO). In this framework, an adaptive resampling strategy is proposed that uses the genetic algorithm to increase the diversity of particles, and the principles of fractional differential theory and chaotic optimisation are combined into the algorithm to improve the conventional PSO approach. We observe that the fractional differential approach speeds up the iteration of the algorithm and chaotic optimisation prevents premature convergence. A new idea of a virtual particle is put forward as the global optimisation target for the improved PSO scheme. This approach is more accurate in terms of determining the optimisation target based on the geometric position of the particle, compared to an approach based on the maximum weight value of the particle. The proposed IFastSLAM method is compared with conventional FastSLAM, PSO-FastSLAM, and an adaptive generic FastSLAM algorithm (AGA-FastSLAM). The superiority of IFastSLAM is verified by simulations, experiments with a real-world dataset, and field experiments.

Sensors ◽  
2020 ◽  
Vol 20 (6) ◽  
pp. 1682 ◽  
Author(s):  
Xiong Zou ◽  
Changshi Xiao ◽  
Wenqiang Zhan ◽  
Chunhui Zhou ◽  
Supu Xiu ◽  
...  

For the navigation of an unmanned surface vehicle (USV), detection and recognition of the water-shore-line (WSL) is an important part of its intellectualization. Current research on this issue mainly focuses on the straight WSL obtained by straight line fitting. However, the WSL in the image acquired by boat-borne vision is not always in a straight line, especially in an inland river waterway. In this paper, a novel three-step approach for WSL detection is therefore proposed to solve this problem through the information of an image sequence. Firstly, the initial line segment pool is built by the line segment detector (LSD) algorithm. Then, the coarse-to-fine strategy is used to obtain the onshore line segment pool, including the rough selection of water area instability and the fine selection of the epipolar constraint between image frames, both of which are demonstrated in detail in the text. Finally, the complete shore area is generated by an onshore line segment pool of multi-frame images, and the lower boundary of the area is the desired WSL. In order to verify the accuracy and robustness of the proposed method, field experiments were carried out in the inland river scene. Compared with other detection algorithms based on image processing, the results demonstrate that this method is more adaptable, and can detect not only the straight WSL, but also the curved WSL.


Sensors ◽  
2018 ◽  
Vol 18 (12) ◽  
pp. 4322 ◽  
Author(s):  
Caroline Silva ◽  
Átila de Oliveira ◽  
Marcelo Fernandes

This work describes the performance of a DPNA-GA (Dynamic Planning Navigation Algorithm optimized with Genetic Algorithm) algorithm applied to autonomous navigation in unknown static and dynamic terrestrial environments. The main aim was to validate the functionality and robustness of the DPNA-GA, with variations of genetic parameters including the crossover rate and population size. To this end, simulations were performed of static and dynamic environments, applying the different conditions. The simulation results showed satisfactory efficiency and robustness of the DPNA-GA technique, validating it for real applications involving mobile terrestrial robots.


2020 ◽  
Vol 992 ◽  
pp. 843-848
Author(s):  
L. Moroz ◽  
Anna Maslovskaya

The paper is devoted to mathematical modeling pyroelectric current of ferroelectric single crystal under the conditions of intensive light heating in view of fractal behavior of these materials. The proposed approach is based on numerical simulation of thermal distribution in a ferroelectric sample using time fractional operator as well as computation of pyroelectric response. The simulation results for typical TGS ferroelectric crystal were described in one-dimensional case of the model in comparison with experimental data. Pyroelectric signals depending on temperature pyroelectric coefficient and thermal physical characteristics were also analyzed.


2018 ◽  
Vol 30 (4) ◽  
pp. 591-597 ◽  
Author(s):  
Naoki Akai ◽  
Luis Yoichi Morales ◽  
Hiroshi Murase ◽  
◽  

This paper presents a teaching-playback navigation method that does not require a consistent map built using simultaneous localization and mapping (SLAM). Many open source projects related to autonomous navigation including SLAM have been made available recently; however, autonomous mobile robot navigation in large-scale environments is still difficult because it is difficult to build a consistent map. The navigation method presented in this paper uses several partial maps to represent an environment map. In other words, the complex mapping process is not necessary to begin autonomous navigation. In addition, the trajectory that the robot travels in the mapping phase can be directly used as a target path. As a result, teaching-playback autonomous navigation can be achieved without any off-line processes. We tested the navigation method using log data taken in the environment of the Tsukuba Challenge and the testing results show its performance. We provide source code for the navigation method, which includes modules required for autonomous navigation (https://github.com/NaokiAkai/AutoNavi).


2013 ◽  
Vol 135 (3) ◽  
Author(s):  
P. Ilamathi ◽  
V. Selladurai ◽  
K. Balamurugan

An approach to model coal combustion process to predict and minimize unburned carbon in bottom ash of a large-capacity pulverized coal-fired boiler used in thermal power plant is proposed. The unburned carbon characteristic is investigated by parametric field experiments. The effects of excess air, coal properties, boiler load, air distribution scheme, and nozzle tilt are studied. An artificial neural network (ANN) is used to model the unburned carbon in bottom ash. A genetic algorithm (GA) is employed to perform a search to determine the optimum level process parameters in ANN model which decreases the unburned carbon in bottom ash.


2003 ◽  
Vol 123 (10) ◽  
pp. 1148-1154
Author(s):  
Fei Wang ◽  
Takuya Kamano ◽  
Takashi Yasuno ◽  
Takayuki Suzuki ◽  
Hironobu Harada

Sign in / Sign up

Export Citation Format

Share Document