scholarly journals High-Throughput and Low-Latency Digital Baseband Architecture for Energy-Efficient Wireless VR Systems

Electronics ◽  
2019 ◽  
Vol 8 (7) ◽  
pp. 815 ◽  
Author(s):  
Seokha Hwang ◽  
Seungsik Moon ◽  
Dongyun Kam ◽  
Inn-Yeal Oh ◽  
Youngjoo Lee
Keyword(s):  
High Speed ◽  
Near Field ◽  
Rf Circuits ◽  
60 Ghz ◽  
Video Streams ◽  
Iterative Processing ◽  
Block Level ◽  
Quality Of Transmission ◽  
Processing Steps

This paper presents a novel baseband architecture that supports high-speed wireless VR solutions using 60 GHz RF circuits. Based on the experimental observations by our previous 60 GHz transceiver circuits, the efficient baseband architecture is proposed to enhance the quality of transmission. To achieve a zero-latency transmission, we define an (106,920, 95,040) interleaved-BCH error-correction code (ECC), which removes iterative processing steps in the previous LDPC ECC standardized for the near-field wireless communication. Introducing the block-level interleaving, the proposed baseband processing successfully scatters the existing burst errors to the small-sized component codes, and recovers up to 1080 consecutive bit errors in a data frame of 106,920 bits. To support the high-speed wireless VR system, we also design the massive-parallel BCH encoder and decoder, which is tightly connected to the block-level interleaver and de-interleaver. Including the high-speed analog interfaces for the external devices, the proposed baseband architecture is designed in 65 nm CMOS, supporting a data rate of up to 12.8 Gbps. Experimental results show that the proposed wireless VR solution can transfer up to 4 K high-resolution video streams without using time-consuming compression and decompression, successfully achieving a transfer latency of 1 ms.

High-Speed Imaging to Study an Auto-Oscillating Vocal Fold Replica for Different Initial Conditions

2017 ◽  
Vol 09 (05) ◽  
pp. 1750064 ◽  
Author(s):  
A. Van Hirtum ◽  
X. Pelorson
Keyword(s):  
Vocal Fold ◽  
High Speed ◽  
Initial Conditions ◽  
Vocal Folds ◽  
High Speed Imaging ◽  
Human Voice ◽  
Manual Intervention ◽  
Geometrical Features ◽  
Upstream Pressure

Experiments on mechanical deformable vocal folds replicas are important in physical studies of human voice production to understand the underlying fluid–structure interaction. At current date, most experiments are performed for constant initial conditions with respect to structural as well as geometrical features. Varying those conditions requires manual intervention, which might affect reproducibility and hence the quality of experimental results. In this work, a setup is described which allows setting elastic and geometrical initial conditions in an automated way for a deformable vocal fold replica. High-speed imaging is integrated in the setup in order to decorrelate elastic and geometrical features. This way, reproducible, accurate and systematic measurements can be performed for prescribed initial conditions of glottal area, mean upstream pressure and vocal fold elasticity. Moreover, quantification of geometrical features during auto-oscillation is shown to contribute to the experimental characterization and understanding.

Machining quality of high speed helical milling of carbon fiber reinforced plastics

2021 ◽  
pp. 095440622199673
Author(s):  
Adel Abidi ◽  
Sahbi Ben Salem ◽  
Mohamed Athmane Yallese
Keyword(s):  
Surface Roughness ◽  
Carbon Fiber ◽  
High Speed ◽  
Hole Diameter ◽  
Feed Speed ◽  
Carbon Fiber Reinforced Plastics ◽  
Reinforced Plastics ◽  
Machining Quality ◽  
Fiber Reinforced Plastics

Among advanced cutting methods, High Speed Milling (HSM) is often recommended to improve the productivity and to reduce the costs of machining parts. As every cutting process, HSM is characterized by some defects like surface roughness and delamination are the main defects generated in composite materials. The aim of this experimental work is the studying of the machining quality of woven Carbon fiber reinforced plastics (CFRP) using the HSM technology. Experiments were done using different machining parameters combinations to make opened holes in CFRP laminates. This study investigated the effect of cutting speed, orbital feed speed, hole diameter on the delamination defect and surface roughness responses generated in the drilled holes. The design of experimental tests was generated using the approach of Central Composite Design (CCD). The characterization of these responses was treated with the Analysis of variance (ANOVA) and Response surface methodology (RSM). Results showed that the surface roughness is highly affected by the orbital feed speed (F) with contribution of 22.45%. The delamination factor at entry and exit of holes is strongly influenced by the hole diameter D (25.97% and 57.43%) respectively. The developed model equations gave a good correlation between the empirical and predicted results. The optimization of the milling parameters was treated using desirability function to minimize the surface roughness (Ra) and the delamination factor simultaneously.

scholarly journals Surface quality of high-speed cutting plates in flat grinding by new abrasive wheels of “Saint-Gobain Abrasive” company

2020 ◽  
Vol 971 ◽  
pp. 022077
Author(s):  
Nguyen Duy Canh ◽  
Nguyen Van Canh ◽  
Pham Xuan Hong ◽  
Nguyen Ngoc Hue ◽  
Tran Dinh Duy
Keyword(s):  
Surface Quality ◽  
High Speed ◽  
High Speed Cutting

Driving Factors Analysis of Carbon Dioxide Emissions in China Based on STIRPAT Model

2013 ◽  
Vol 734-737 ◽  
pp. 1910-1914 ◽  
Author(s):  
Qiao Zhi Zhao ◽  
Qing You Yan
Keyword(s):  
Economic Growth ◽  
Carbon Dioxide ◽  
Carbon Dioxide Emissions ◽  
High Speed ◽  
Carbon Dioxide Emission ◽  
Urbanization Process ◽  
Stirpat Model ◽  
Factors Analysis ◽  
Secondary Industry

China is developing at relatively high speed, not only the regional development speed should be focused upon, but also the environmental impact of economic growth should be paid attention to, especially the level change of carbon dioxide emission. To some degree, quantity of carbon dioxide emission has become one of the most important indexes for measuring quality of a nations economic growth. Thus, this thesis is trying to analyze the driving relations between economic growth and carbon dioxide. Upon STIRPAT model, ridge regression method and elasticity theory are applied to analyze the influencing factors of carbon dioxide quantity such as the population quantity, Chinas urbanization process, per capita GDP, energy density and the percentage of the secondary industry. Correspondingly, based on the different influencing variables to carbon dioxide emission quantity, needy measures are brought out to control and decrease emissions. Feasible suggestions are trying to improve Chinas economic development quality.

scholarly journals A New Approach to Assess the Quality of Small High-Speed Centrifugal Fans Using Noise Measurement

1999 ◽  
Vol 5 (2) ◽  
pp. 147-153 ◽  
Author(s):  
Dingjun Cui ◽  
Ian A. Craighead
Keyword(s):  
Signal Processing ◽  
Quality Assessment ◽  
Condition Monitoring ◽  
High Speed ◽  
Noise Levels ◽  
New Approach ◽  
Commercial Market ◽  
Centrifugal Fans ◽  
Special Approach

The requirements for a special approach for the quality assessment of small high-speed centrifugal fans are outlined and a new parameter designating the noise levels from the product in comprehensive form will be discussed and described as a criterion for such quality assessment.By applying techniques of signal processing and condition monitoring, the sources of the vibration and noise in different sections of the product can be identified, then the noise from each source from different components can be determined. Using this criterion, more aspects of the quality of the products can be assessed and suggestions to improve the quality of the products can be made. Finally, the assessment of a number ofvacuum cleaner motor/fan units available in the commercial market will be presented and compared with conventional specifications. It will be shown that the new parameter provides a more useful indication of appliance quality.

Sign in / Sign up

Export Citation Format

Share Document