scholarly journals High-Temperature Superconducting Non-Insulation Closed-Loop Coils for Electro-Dynamic Suspension System

Electronics ◽  
2021 ◽  
Vol 10 (16) ◽  
pp. 1980
Author(s):  
Li Lu ◽  
Wei Wu ◽  
Xin Yu ◽  
Zhijian Jin
Keyword(s):  
High Temperature ◽  
Liquid Helium ◽  
High Speed ◽  
Closed Loop ◽  
Permanent Magnets ◽  
Superconducting Magnets ◽  
Current Mode ◽  
Persistent Current ◽  
Magnetomotive Force ◽  
High Temperature Superconducting

The null-flux electro-dynamic suspension (EDS) system is a feasible high-speed maglev system with speeds of above 600 km/h. Owing to their greater current-carrying capacity, superconducting magnets can provide a super-magnetomotive force that is required for the null-flux EDS system, which cannot be provided by electromagnets and permanent magnets. Relatively mature high-speed maglev technology currently exists using low-temperature superconducting (LTS) magnets as the core, which works in the liquid helium temperature region (T ⩽ 4.2 K). Second-generation (2G) high-temperature superconducting (HTS) magnets wound by REBa2Cu3O7−δ (REBCO, RE = rare earth) tapes work above the 20 K region and do not rely on liquid helium, which is rare on Earth. In this study, the HTS non-insulation closed-loop coils module was designed for an EDS system and excited with a persistent current switch (PCS). The HTS coils module can work in the persistent current mode and exhibit premier thermal quenching self-protection. In addition, a full-size double-pancake (DP) module was designed and manufactured in this study, and it was tested in a liquid nitrogen (LN2) environment. The critical current of the DP module was approximately 54 A, and it could work in the persistent current mode with an average decay rate measured over 12 h of 0.58%/day.

scholarly journals High Temperature Superconducting Non-insulation Closed-loop Coils for Electro-dynamic Suspension System

2021 ◽  
Author(s):  
Li Lu ◽  
Wei Wu ◽  
Xin Yu ◽  
Zhijian Jin
Keyword(s):  
High Temperature ◽  
Liquid Helium ◽  
High Speed ◽  
Closed Loop ◽  
Permanent Magnets ◽  
Current Model ◽  
Persistent Current ◽  
Magnetomotive Force ◽  
High Temperature Superconducting ◽  
Double Pancake

Null-flux Electro-dynamic suspension (EDS) system promises to be one of the feasible high-speed maglev systems above 600 km/h. On account of its greater current-carrying capacity, superconducting magnet can provide super-magnetomotive force that is required for null-flux EDS system and cannot be provided by electromagnets and permanent magnets. There is already a relatively mature high-speed maglev technology with low temperature superconducting (LTS) magnets as the core, which works in the liquid helium temperature region (T≤4.2 K). 2-Generation high temperature superconducting (HTS) magnet winded by REBa2Cu3O7−δ (REBCO, RE=rare earth) tapes works above 20 K region and do not need to count on liquid helium which is rare on earth. This paper designed HTS no-insulation closed-loop coils applied for EDS system and energized with persistent current switch. The coils can work at persistent current model and has premier thermal quench self-protection. Besides, a full size double-pancake module was designed and manufactured in this paper, and it was tested in liquid nitrogen. The double-pancake module’s critical current is about 54 A and it is capable of working at persistent current model, whose average decay rate measured in 12 hours is 0.58%/day.

Analysis of the Permanent Magnet Guideway of High Temperature Superconducting Maglev

2013 ◽  
Vol 745-746 ◽  
pp. 197-202 ◽  
Author(s):  
Chang Qing Ye ◽  
Zi Gang Deng ◽  
Jia Su Wang
Keyword(s):  
High Temperature ◽  
Permanent Magnet ◽  
High Speed ◽  
Optimization Design ◽  
Optimization Methods ◽  
High Temperature Superconducting ◽  
Practical Engineering ◽  
Hts Maglev ◽  
Ndfeb Permanent Magnet ◽  
The Cost

t was theoretically and experimentally proved that High Temperature Superconducting (HTS) Maglev had huge potential employment in rail transportation and high speed launch system. This had attracted great research interests in practical engineering. The optimization design was one of the most important works in the application of the HTS Maglev. As the NdFeB permanent magnet and HTS materials prices increased constantly, the design optimization of the permanent guideway (PMG) of HTS maglev became one of the indispensable works to decrease the cost of the application. This paper first reviewed four types of PMGs used by the HTS Maglev, then disucssed their structures and magnetic fields. Finally, the optimization methods of these four PMGs were compared. It was suggested that with better optimization methods, the levitation performance within a limit cost got better. That would be helpful to the future numerical optimization of the PMG of the HTS maglev.

scholarly journals High Speed, High Temperature, Fault Tolerant Operation of a Combination Magnetic-Hydrostatic Bearing Rotor Support System for Turbomachinery

2004 ◽  
Author(s):  
Mark Jansen ◽  
Gerald Montague ◽  
Andrew Provenza ◽  
Alan Palazzolo
Keyword(s):  
High Temperature ◽  
High Speed ◽  
Closed Loop ◽  
Fault Tolerant ◽  
Active Vibration Control ◽  
Control Algorithms ◽  
Displacement Sensors ◽  
Rotor Support ◽  
Active Vibration ◽  
Speed Computer

Closed loop operation of a single, high temperature magnetic radial bearing to 30,000 RPM (2.25 million DN) and 540°C (1,000°F) is discussed. Also, high temperature, fault tolerant operation for the three axis system is examined. A novel, hydrostatic backup bearing system was employed to attain high speed, high temperature, lubrication free support of the entire rotor system. The hydrostatic bearings were made of a high lubricity material and acted as journal-type backup bearings. New, high temperature displacement sensors were successfully employed to monitor shaft position throughout the entire temperature range and are described in this paper. Control of the system was accomplished through a stand alone, high speed computer controller and it was used to run both the fault-tolerant PID and active vibration control algorithms.

scholarly journals A Coupled A–H Formulation for Magneto-Thermal Transients in High-Temperature Superconducting Magnets

2020 ◽  
Vol 30 (5) ◽  
pp. 1-11 ◽  
Author(s):  
Lorenzo Bortot ◽  
Bernhard Auchmann ◽  
Idoia Cortes Garcia ◽  
Herbert De Gersem ◽  
Michal Maciejewski ◽  
...  
Keyword(s):  
High Temperature ◽  
Superconducting Magnets ◽  
Thermal Transients ◽  
High Temperature Superconducting ◽  
H Formulation

scholarly journals Superconducting Accelerator Magnets Based on High-Temperature Superconducting Bi-2212 Round Wires

Instruments ◽  
2020 ◽  
Vol 4 (2) ◽  
pp. 17
Author(s):  
Tengming Shen ◽  
Laura Garcia Fajardo
Keyword(s):  
High Temperature ◽  
High Field ◽  
Scientific Discovery ◽  
Superconducting Magnets ◽  
Hadron Collider ◽  
Development Program ◽  
High Energy ◽  
Superconducting Transition ◽  
High Temperature Superconducting ◽  
Superconducting Accelerator

Superconducting magnets are an invaluable tool for scientific discovery, energy research, and medical diagnosis. To date, virtually all superconducting magnets have been made from two Nb-based low-temperature superconductors (Nb-Ti with a superconducting transition temperature Tc of 9.2 K and Nb3Sn with a Tc of 18.3 K). The 8.33 T Nb-Ti accelerator dipole magnets of the large hadron collider (LHC) at CERN enabled the discovery of the Higgs Boson and the ongoing search for physics beyond the standard model of high energy physics. The 12 T class Nb3Sn magnets are key to the International Thermonuclear Experimental Reactor (ITER) Tokamak and to the high-luminosity upgrade of the LHC that aims to increase the luminosity by a factor of 5–10. In this paper, we discuss opportunities with a high-temperature superconducting material Bi-2212 with a Tc of 80–92 K for building more powerful magnets for high energy circular colliders. The development of a superconducting accelerator magnet could not succeed without a parallel development of a high performance conductor. We will review triumphs of developing Bi-2212 round wires into a magnet grade conductor and technologies that enable them. Then, we will discuss the challenges associated with constructing a high-field accelerator magnet using Bi-2212 wires, especially those dipoles of 15–20 T class with a significant value for future physics colliders, potential technology paths forward, and progress made so far with subscale magnet development based on racetrack coils and a canted-cosine-theta magnet design that uniquely addresses the mechanical weaknesses of Bi-2212 cables. Additionally, a roadmap being implemented by the US Magnet Development Program for demonstrating high-field Bi-2212 accelerator dipole technologies is presented.

Sign in / Sign up

Export Citation Format

Share Document