scholarly journals Unmanned Aerial Vehicles for Magnetic Surveys: A Review on Platform Selection and Interference Suppression

Drones ◽  
2021 ◽  
Vol 5 (3) ◽  
pp. 93
Author(s):  
Yaoxin Zheng ◽  
Shiyan Li ◽  
Kang Xing ◽  
Xiaojuan Zhang
Keyword(s):  
Unmanned Aerial Vehicles ◽  
Hot Spot ◽  
Low Cost ◽  
Research Fields ◽  
Aerial Vehicles ◽  
Increased Risk ◽  
Payload Capacity ◽  
Pros And Cons ◽  
Low Altitude

In the past two decades, unmanned aerial vehicles (UAVs) have been used in many scientific research fields for various applications. In particular, the use of UAVs for magnetic surveys has become a hot spot and is expected to be actively applied in the future. A considerable amount of literature has been published on the use of UAVs for magnetic surveys, however, how to choose the platform and reduce the interference of UAV to the collected data have not been discussed systematically. There are two primary aims of this study: (1) To ascertain the basis of UAV platform selection and (2) to investigate the characteristics and suppression methods of UAV magnetic interference. Systematic reviews were performed to summarize the results of 70 academic studies (from 2005 to 2021) and outline the research tendencies for applying UAVs in magnetic surveys. This study found that multi-rotor UAVs have become the most widely used type of UAVs in recent years because of their advantages such as easiness to operate, low cost, and the ability of flying at a very low altitude, despite their late appearance. With the improvement of the payload capacity of UAVs, to use multiple magnetometers becomes popular since it can provide more abundant information. In addition, this study also found that the most commonly used method to reduce the effects of the UAV’s magnetic interference is to increase the distance between the sensors and the UAV, although this method will bring about other problems, e.g., the directional and positional errors of sensors caused by erratic movements, the increased risk of impact to the magnetometers. The pros and cons of different types of UAV, magnetic interference characteristics and suppression methods based on traditional aeromagnetic compensation and other methods are discussed in detail. This study contributes to the classification of current UAV applications as well as the data processing methods in magnetic surveys.

scholarly journals Efficient Reactive Obstacle Avoidance Using Spirals for Escape

Drones ◽  
2021 ◽  
Vol 5 (2) ◽  
pp. 51
Author(s):  
Fábio Azevedo ◽  
Jaime S. Cardoso ◽  
André Ferreira ◽  
Tiago Fernandes ◽  
Miguel Moreira ◽  
...  
Keyword(s):  
Unmanned Aerial Vehicles ◽  
Mobile Robotics ◽  
Point Clouds ◽  
Depth Camera ◽  
Main Task ◽  
Robust Method ◽  
Aerial Vehicles ◽  
Correct Execution ◽  
Low Altitude ◽  
High Degree

The usage of unmanned aerial vehicles (UAV) has increased in recent years and new application scenarios have emerged. Some of them involve tasks that require a high degree of autonomy, leading to increasingly complex systems. In order for a robot to be autonomous, it requires appropriate perception sensors that interpret the environment and enable the correct execution of the main task of mobile robotics: navigation. In the case of UAVs, flying at low altitude greatly increases the probability of encountering obstacles, so they need a fast, simple, and robust method of collision avoidance. This work covers the problem of navigation in unknown scenarios by implementing a simple, yet robust, environment-reactive approach. The implementation is done with both CPU and GPU map representations to allow wider coverage of possible applications. This method searches for obstacles that cross a cylindrical safety volume, and selects an escape point from a spiral for avoiding the obstacle. The algorithm is able to successfully navigate in complex scenarios, using both a high and low-power computer, typically found aboard UAVs, relying only on a depth camera with a limited FOV and range. Depending on the configuration, the algorithm can process point clouds at nearly 40 Hz in Jetson Nano, while checking for threats at 10 kHz. Some preliminary tests were conducted with real-world scenarios, showing both the advantages and limitations of CPU and GPU-based methodologies.

scholarly journals Capabilities of the Unmanned Aerial Vehicles in Logistic Support

10.37105/sd.5 ◽  
2018 ◽  
Vol 4 ◽  
pp. 22-26
Author(s):  
Michalska Anna ◽  
Karpińska Katarzyna
Keyword(s):  
Unmanned Aerial Vehicles ◽  
New Technologies ◽  
Point Of View ◽  
Delivery Methods ◽  
Military Equipment ◽  
Aerial Vehicles ◽  
Logistic Support ◽  
The Military

The main focus of this paper is the capabilities of Unmanned Aerial Vehicles as a military logistic support in conflicts areas. The conducted research addresses the problems of traditional military delivery methods. Next, the problem of using UAVs only for civilian purposes is considered. The paper begins with short elucidation of logistic support and further provides the classification of logistic materials and discusses five categories of military equipment from the logistics point of view. Next, the paper discusses the characteristics of the parameters and properties of the chosen existing UAVs that are used for the delivery of materials. Consequently, a comparison of the UAVs is carried out, and new technologies for logistic transport are presented. This paper is concluded with the claim that it is necessary to modernize the process of logistic support in the military.

Radiometric Quality Assessment of Video Sequences Acquired from UAV Photogrammetric Systems

2017 ◽  
Author(s):  
Damian Wierzbicki ◽  
Anna Fryskowska
Keyword(s):  
Unmanned Aerial Vehicles ◽  
Video Stream ◽  
Video Data ◽  
Video Sequences ◽  
Wide Field ◽  
Sensing Applications ◽  
Aerial Vehicles ◽  
High Resolution Imagery ◽  
Low Altitude ◽  
Imagery Data

The issue of imagery data collection and its implementation in photogrammetric studies with the use of unmanned aerial vehicles is still valid and provides a wide field of research in the creation of new and expansion of existing solutions. It is particularly important to increase the accuracy of photogrammetric products. These days low altitude unmanned aerial vehicles are being used more and more often in photogrammetric applications. Compact digital cameras had acquired single, high-resolution imagery. Data obtained from low altitudes were often (and still are) used in mapping and 3D modelling. Due to the low costs of flights of UAV systems in comparison with traditional flights, applications of such platforms are also attractive for many remote sensing applications. However, due to the use of non-metric video cameras, one of the main problems when trying to automate the video data processing, is the video sequences’ relatively poor radiometric quality. The article addresses the issue of assessing the quality of the video imagery acquired from a low altitude UAV platform. The Authors presented quality Indicators dedicated to UAV video sequences. The method is based on the analysis of the video stream, obtained in the different weather and lighting conditions. As a result of the research, an objective quality index for video acquired from low altitudes was determined.

scholarly journals Eyes in the Sky: Assessing the Feasibility of Low-Cost, Ready-to-Use Unmanned Aerial Vehicles to Monitor Primate Populations Directly

2019 ◽  
Vol 91 (1) ◽  
pp. 69-82
Author(s):  
Brandon P. Semel ◽  
Sarah M. Karpanty ◽  
Faramalala Francette Vololonirina ◽  
Ando Nantenaina Rakotonanahary
Keyword(s):  
Unmanned Aerial Vehicles ◽  
Low Cost ◽  
Aerial Vehicles

scholarly journals Model-Based Autonomous Navigation with Moment of Inertia Estimation for Unmanned Aerial Vehicles

Sensors ◽  
2019 ◽  
Vol 19 (11) ◽  
pp. 2467 ◽  
Author(s):  
Hery Mwenegoha ◽  
Terry Moore ◽  
James Pinchin ◽  
Mark Jabbal
Keyword(s):  
Unmanned Aerial Vehicles ◽  
Navigation System ◽  
Process Model ◽  
Unscented Kalman Filter ◽  
Low Cost ◽  
Moment Of Inertia ◽  
Model Parameters ◽  
Main Process ◽  
Model Based ◽  
Aerial Vehicles

The dominant navigation system for low-cost, mass-market Unmanned Aerial Vehicles (UAVs) is based on an Inertial Navigation System (INS) coupled with a Global Navigation Satellite System (GNSS). However, problems tend to arise during periods of GNSS outage where the navigation solution degrades rapidly. Therefore, this paper details a model-based integration approach for fixed wing UAVs, using the Vehicle Dynamics Model (VDM) as the main process model aided by low-cost Micro-Electro-Mechanical Systems (MEMS) inertial sensors and GNSS measurements with moment of inertia calibration using an Unscented Kalman Filter (UKF). Results show that the position error does not exceed 14.5 m in all directions after 140 s of GNSS outage. Roll and pitch errors are bounded to 0.06 degrees and the error in yaw grows slowly to 0.65 degrees after 140 s of GNSS outage. The filter is able to estimate model parameters and even the moment of inertia terms even with significant coupling between them. Pitch and yaw moment coefficient terms present significant cross coupling while roll moment terms seem to be decorrelated from all of the other terms, whilst more dynamic manoeuvres could help to improve the overall observability of the parameters.

scholarly journals Classification of robotic battery service systems for unmanned aerial vehicles

2018 ◽  
Vol 161 ◽  
pp. 03023
Author(s):  
Tien Ngo ◽  
Mehmet Guzey ◽  
Vladimir Dashevsky
Keyword(s):  
Unmanned Aerial Vehicles ◽  
Power Supply ◽  
Landing Site ◽  
Operating Conditions ◽  
Joint Work ◽  
Operator Experience ◽  
Aerial Vehicles ◽  
Robotic Platforms ◽  
Algorithmic Model

Existing examples of prototypes of ground-based robotic platforms used as a landing site for unmanned aerial vehicles are considered. In some cases, they are equipped with a maintenance mechanism for the power supply module. The main requirements for robotic multi-copter battery maintenance systems depending on operating conditions, required processing speed, operator experience and other parameters are analyzed. The key issues remain questions of the autonomous landing of the unmanned aerial vehicles on the platform and approach to servicing battery. The existing prototypes of service robotic platforms are differed in the complexity of internal mechanisms, speed of service, algorithms of joint work of the platform and unmanned aerial vehicles during the landing and maintenance of the battery. The classification of robotic systems for servicing the power supply of multi-copter batteries criteria is presented using the following: the type of basing, the method of navigation during landing, the shape of the landing pad, the method of restoring the power supply module. The proposed algorithmic model of the operation of battery power maintenance system of the multi-copter on ground-based robotic platform during solving the target agrarian problem is described. Wireless methods of battery recovery are most promising, so further development and prototyping of a wireless charging station for multi-copter batteries will be developed.

scholarly journals Accurate Landing of Unmanned Aerial Vehicles Using Ground Pattern Recognition

Electronics ◽  
2019 ◽  
Vol 8 (12) ◽  
pp. 1532 ◽  
Author(s):  
Jamie Wubben ◽  
Francisco Fabra ◽  
Carlos T. Calafate ◽  
Tomasz Krzeszowski ◽  
Johann M. Marquez-Barja ◽  
...  
Keyword(s):  
Pattern Recognition ◽  
Unmanned Aerial Vehicles ◽  
High Precision ◽  
Low Cost ◽  
Target Position ◽  
Flight Behavior ◽  
Ground Pattern ◽  
Aerial Vehicles ◽  
Exact Position ◽  
Precision Landing

Over the last few years, several researchers have been developing protocols and applications in order to autonomously land unmanned aerial vehicles (UAVs). However, most of the proposed protocols rely on expensive equipment or do not satisfy the high precision needs of some UAV applications such as package retrieval and delivery or the compact landing of UAV swarms. Therefore, in this work, a solution for high precision landing based on the use of ArUco markers is presented. In the proposed solution, a UAV equipped with a low-cost camera is able to detect ArUco markers sized 56 × 56 cm from an altitude of up to 30 m. Once the marker is detected, the UAV changes its flight behavior in order to land on the exact position where the marker is located. The proposal was evaluated and validated using both the ArduSim simulation platform and real UAV flights. The results show an average offset of only 11 cm from the target position, which vastly improves the landing accuracy compared to the traditional GPS-based landing, which typically deviates from the intended target by 1 to 3 m.

scholarly journals Internet of Unmanned Aerial Vehicles—A Multilayer Low-Altitude Airspace Model for Distributed UAV Traffic Management

Sensors ◽  
2019 ◽  
Vol 19 (21) ◽  
pp. 4779 ◽  
Author(s):  
Nader S. Labib ◽  
Grégoire Danoy ◽  
Jedrzej Musial ◽  
Matthias R. Brust ◽  
Pascal Bouvry
Keyword(s):  
Unmanned Aerial Vehicles ◽  
Traffic Management ◽  
Complex Problem ◽  
Experimental Simulation ◽  
Aerial Vehicles ◽  
Safe Management ◽  
Wide Range ◽  
Abstract Level ◽  
Low Altitude ◽  
New Research

The rapid adoption of Internet of Things (IoT) has encouraged the integration of new connected devices such as Unmanned Aerial Vehicles (UAVs) to the ubiquitous network. UAVs promise a pragmatic solution to the limitations of existing terrestrial IoT infrastructure as well as bring new means of delivering IoT services through a wide range of applications. Owning to their potential, UAVs are expected to soon dominate the low-altitude airspace over populated cities. This introduces new research challenges such as the safe management of UAVs operation under high traffic demands. This paper proposes a novel way of structuring the uncontrolled, low-altitude airspace, with the aim of addressing the complex problem of UAV traffic management at an abstract level. The work, hence, introduces a model of the airspace as a weighted multilayer network of nodes and airways and presents a set of experimental simulation results using three UAV traffic management heuristics.

scholarly journals Operational Framework for Rapid, Very-high Resolution Mapping of Glacial Geomorphology Using Low-cost Unmanned Aerial Vehicles and Structure-from-Motion Approach

2019 ◽  
Vol 11 (1) ◽  
pp. 65 ◽  
Author(s):  
Marek W. Ewertowski ◽  
Aleksandra M. Tomczyk ◽  
David J. A. Evans ◽  
David H. Roberts ◽  
Wojciech Ewertowski
Keyword(s):  
High Resolution ◽  
Unmanned Aerial Vehicles ◽  
Structure From Motion ◽  
Low Cost ◽  
Control Point ◽  
Glacial Geomorphology ◽  
High Resolution Mapping ◽  
Aerial Vehicles ◽  
Resolution Mapping ◽  
Very High

This study presents the operational framework for rapid, very-high resolution mapping of glacial geomorphology, with the use of budget Unmanned Aerial Vehicles and a structure-from-motion approach. The proposed workflow comprises seven stages: (1) Preparation and selection of the appropriate platform; (2) transport; (3) preliminary on-site activities (including optional ground-control-point collection); (4) pre-flight setup and checks; (5) conducting the mission; (6) data processing; and (7) mapping and change detection. The application of the proposed framework has been illustrated by a mapping case study on the glacial foreland of Hørbyebreen, Svalbard, Norway. A consumer-grade quadcopter (DJI Phantom) was used to collect the data, while images were processed using the structure-from-motion approach. The resultant orthomosaic (1.9 cm ground sampling distance—GSD) and digital elevation model (7.9 cm GSD) were used to map the glacial-related landforms in detail. It demonstrated the applicability of the proposed framework to map and potentially monitor detailed changes in a rapidly evolving proglacial environment, using a low-cost approach. Its coverage of multiple aspects ensures that the proposed framework is universal and can be applied in a broader range of settings.

Sign in / Sign up

Export Citation Format

Share Document