scholarly journals Contact Angle and Cell Adhesion of Micro/Nano-Structured Poly (Lactic-Co-Glycolic Acid) Membranes for Dental Regenerative Therapy

2021 ◽  
Vol 9 (11) ◽  
pp. 124
Author(s):  
Naoyuki Kaga ◽  
Hiroki Fujimoto ◽  
Sho Morita ◽  
Yuichiro Yamaguchi ◽  
Takashi Matsuura
Keyword(s):  
Electron Microscopy ◽  
Contact Angle ◽  
Cell Adhesion ◽  
Tissue Regeneration ◽  
Glycolic Acid ◽  
Guided Bone Regeneration ◽  
Regenerative Therapy ◽  
Regenerative Dentistry ◽  
Contact Angle Analysis ◽  
Scanning Electron

Biodegradable membranes are used in regenerative dentistry for guided tissue regeneration (GTR) and guided bone regeneration (GBR). In this study, patterned poly (lactic-co-glycolic acid) (PLGA) membranes with groove, pillar, and hole structures were successfully fabricated by thermal nanoimprinting. Their surfaces were evaluated for topography by scanning electron microscopy and laser microscopy, for hydrophobicity/hydrophilicity by contact angle analysis, and for MC3T3-E1 cell adhesion. The sizes of the patterns on the surfaces of the membranes were 0.5, 1.0, and 2.0 μm, respectively, with the height/depth being 1.0 μm. The pillared and holed PLGA membranes were significantly more hydrophobic than the non-patterned PLGA membranes (p < 0.05). However, the 0.5 μm- and 1.0 μm-grooved PLGA membranes were significantly more hydrophilic than the non-patterned PLGA membranes (p < 0.05). The 0.5 μm-grooved, pillared, and holed membranes exhibited significantly superior adhesion to the MC3T3-E1 cells than the non-patterned PLGA (p < 0.05). These results suggest that patterned PLGA membranes can be clinically used for GTR and GBR in the dental regeneration field.

Influence of the Treatment with Sulfuric Acid on Adhesion of Natural Rubber and Cast Polyurethane Elastomers

2012 ◽  
Vol 452-453 ◽  
pp. 86-90 ◽  
Author(s):  
Zhi Yi Zhang ◽  
Hui Jun Niu ◽  
Jia Jia Zhang ◽  
Yan Yun Cui
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Contact Angle ◽  
Sulfuric Acid ◽  
Natural Rubber ◽  
Angle Measurement ◽  
Polyurethane Elastomers ◽  
Adhesion Properties ◽  
Rubber Surface ◽  
Scanning Electron

In this study, natural rubber (NR) was treated with sulfuric acid to improve its adhesion properties to polar polymer. T-peel strength tests, scanning electron microscopy, contact-angle measurement (water), Energy Dispersive X-ray Detector were used to analyze the nature of the NR surface modifications which were carried out with sulfuric acid. A noticeable decrease in contact angle was observed on the rubber surface by contact-angle measurements which can be ascribed to the increase of oxidized moieties on the rubber surface. EDX revealed that oxidized moieties were created through treatment with sulfuric acid. The surface modification and mode of bond failure were studied by scanning electron microscopy (SEM). Immersion in sulfuric acid for 15min produced the maximum adhesion strength (10kN/m) and produced a mixed failure mode (interface & rubber failure in the rubber). Treatment with sulfuric acid produced improved wettability as well as chemical (surface oxidation) and morphological modifications (roughness) of the rubber surface.

scholarly journals Preparation and Characterization of K-Carrageenan/Nanosilica Biocomposite Film

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Lokesh R. Rane ◽  
Niranjan R. Savadekar ◽  
Pravin G. Kadam ◽  
Shashank T. Mhaske
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Contact Angle ◽  
Tensile Strength ◽  
Water Vapour ◽  
Transmission Rate ◽  
Composite Films ◽  
Tensile Modulus ◽  
Water Vapour Transmission Rate ◽  
Scanning Electron

The purpose of this study is to improve the performance properties of K-carrageenan (K-CRG) by utilizing nanosilica (NSI) as the reinforcing agent. The composite films were prepared by solution casting method. NSI was added up to 1.5% in the K-CRG matrix. The prepared films were characterized for mechanical (tensile strength, tensile modulus, and elongation at break), thermal (differential scanning calorimetry, thermogravimetric analysis), barrier (water vapour transmission rate), morphological (scanning electron microscopy), contact angle, and crystallinity properties. Tensile strength, tensile modulus, and crystallinity were found to have increased by 13.8, 15, and 48% whereas water vapour transmission rate was found to have decreased by 48% for 0.5% NSI loaded K-CRG composite films. NSI was found to have formed aggregates for concentrations above 0.5% as confirmed by scanning electron microscopy. Melting temperature, enthalpy of melting, and degradation temperature of K-CRG increased with increase in concentration of NSI in K-CRG. Contact angle also increased with increase in concentration of NSI in K-CRG, indicating the decrease in hydrophilicity of the films improving its water resistance properties. This knowledge of the composite film could make beneficial contributions to the food and pharmaceutical packaging applications.

Super-Hydrophobic Surfaces Improve Corrosion Resistance of Fe3Al-Type Intermetallic in Seawater

2008 ◽  
Vol 47-50 ◽  
pp. 173-176 ◽  
Author(s):  
Tao Liu ◽  
Kin Tak Lau ◽  
Shou Gang Chen ◽  
Sha Cheng ◽  
Yan Sheng Yin
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Contact Angle ◽  
Corrosion Resistance ◽  
Electrochemical Impedance ◽  
Hydrophobic Surface ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Atomic Force ◽  
Scanning Electron

A novel super-hydrophobic film was prepared by myristic acid (CH3(CH2)12COOH) chemically adsorbed onto the polyethyleneimine (PEI) coated Fe3Al-type intermetallic wafer. The film character and structure were probed with contact angle measurement, scanning electron microscopy (SEM) and atomic force microscope (AFM). The results suggest that the structure of the film is similar to lotus and the seawater contact angle is larger than 150◦. Moreover, the corrosion resistances of untreated and modified samples in seawater were investigated by electrochemical impedance spectroscopy (EIS). Experimental results show that the corrosion rate of Fe3Al-type intermetallic with super-hydrophobic surface decreases dramatically because of its special microstructure.

Biodegradable Cell Transplantation Devices for Tissue Regeneration

1991 ◽  
Vol 252 ◽  
Author(s):  
Antonios G. Mikos ◽  
Heidi L. Wald ◽  
Georgios Sarakinos ◽  
Susan M. Leite ◽  
Robert Langer
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Cell Transplantation ◽  
Tissue Regeneration ◽  
Cell Function ◽  
Mercury Porosimetry ◽  
Three Dimensional ◽  
Visual Evaluation ◽  
Highly Porous ◽  
Scanning Electron

ABSTRACTBiodegradable polymers can be utilized as templates for cell transplantation and regeneration of metabolic organs and structural tissues. Candidate materials must be adhesive substrates for cells, promote cell growth and allow for retention of cell function. However, the processing requirements of such materials into highly porous three-dimensional structures with large surface per volume and an interconnecting pore network limits their potential application for tissue regeneration. A new processing technique was developed to produce uniform, three-dimensional cell transplantation devices of poly(lactic-co-glycolic acid). The process involved the preparation of highly porous membranes by a solvent-casting and particulate-leaching technique followed by their lamination. The device structural and mechanical properties depended on those of their constituent membranes, as evaluated by mercury porosimetry, scanning electron microscopy, and thermomechanical analysis. Cells to be seeded into the devices were injected from catheters incorporated within their structure. In vitro studies with model suspensions of dyed microspheres allowed for visual evaluation of the internal pore structure of various layered devices. From these studies, numerous parameters of device design for cell seeding were determined including pore size and injection rate. The membrane lamination technique produced devices without interfaces between layers as determined by microsphere injection and scanning electron microscopy.

scholarly journals Anti-Foulant Ultrafiltration Polymer Composite Membranes Incorporated with Composite Activated Carbon/Chitosan and Activated Carbon/Thiolated Chitosan with Enhanced Hydrophilicity

Membranes ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 827
Author(s):  
Syeda Samia Nayab ◽  
M. Asad Abbas ◽  
Shehla Mushtaq ◽  
Bilal Khan Niazi ◽  
Mehwish Batool ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Contact Angle ◽  
Activated Carbon ◽  
Bovine Serum Albumin ◽  
Bovine Serum ◽  
Carbon Composite ◽  
Flux Rate ◽  
Thiolated Chitosan ◽  
Scanning Electron

A rapid increase in population worldwide is giving rise to the severe problem of safe drinking water availability, necessitating the search for solutions that are effective and economical. For this purpose, membrane technology has shown a lot of promise but faces the challenge of fouling, leading to a reduction in its lifetime. In this study, ultrafiltration polyethersulfone membranes were synthesized in two different concentrations, 16% wt. and 20% wt., using the phase inversion method. Chitosan and activated carbon were incorporated as individual fillers and then as composites in both the concentrations. A novel thiolated chitosan/activated carbon composite was introduced into a polyethersulfone membrane matrix. The membranes were then analyzed using Attenuated Total Reflection–Fourier-Transform Infrared spectroscopy (ATR-FTIR), Scanning Electron Microscopy (SEM), optical profilometry, gravimetric analysis, water retention, mechanical testing and contact angle. For membranes with the novel thiolated chitosan/activated carbon composite, Scanning Electron Microscopy micrographs showed better channels, indicating a better permeability possibility, reiterated by the flux rate results. The flux rate and bovine serum albumin flux were also assessed, and the results showed an increase from 105 L/m2h to 114 L/m2h for water flux and the antifouling determined by bovine serum albumin flux increased from 23 L/m2h to 51 L/m2h. The increase in values of water uptake from 22.84% to 76.5% and decrease in contact angle from 64.5 to 55.7 showed a significant increase in the hydrophilic character of the membrane.

Single-stage electrospun innovative combination of polyurethane and neem oil: Synthesis, characterization and appraisal of blood compatibility

2018 ◽  
Vol 33 (6) ◽  
pp. 573-584 ◽  
Author(s):  
Mohan Prasath Mani ◽  
Saravana Kumar Jaganathan ◽  
Ahmad Zahran Khudzari ◽  
Rajasekar Rathanasamy ◽  
Praseetha Prabhakaran
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Contact Angle ◽  
Partial Thromboplastin Time ◽  
Blood Compatibility ◽  
Activated Partial Thromboplastin Time ◽  
The Novel ◽  
Neem Oil ◽  
Composite Patch ◽  
Scanning Electron

Wound healing is a complex process and it requires proper scaffolding for regeneration. An ideal scaffold should provide optimal environmental conditions in order to assist cellular attachment, proliferation and differentiation. In this work, a new composite based on polyurethane and neem oil was fabricated using one-step electrospinning technique. Fabricated composite patch along with the pristine polyurethane was characterized through scanning electron microscopy, Fourier transform and infrared spectroscopy, thermogravimetric analysis, contact angle measurement and atomic force microscopy. Moreover, the blood compatibility was evaluated using activated partial thromboplastin time, partial thromboplastin time and haemolysis assay. Scanning electron microscopy studies of composites revealed the existence of fibres with a smaller diameter (635  ± 105 nm) compared to the pristine polyurethane (969 ± 217 nm). Fourier transform and infrared analysis revealed the formation of hydrogen bond and peak shifting characteristics confirming the interaction of the neem oil with the polyurethane. Contact angle analysis showed the decrease in contact angle indicating the hydrophilic nature of the fabricated patch compared to pristine polyurethane. Thermal gravimetric analysis depicted the better thermal stability of the novel composite patch due to the existence of neem oil in the pristine polyurethane. The presence of neem oil in polyurethane matrix also resulted in an increase in the surface roughness as observed in the AFM analysis. The novel composite patch showed an ability to reduce the thrombogenicity and promoting the anticoagulant nature signified by blood compatibility assays like activated partial thromboplastin time and partial thromboplastin time. Finally, the haemolytic percentage of the fabricated composite (1%) was found to be reduced compared to control (2.733%) indicating better blood compatibility and safety with the red blood cells. Following the results, the fabricated patches offered enhanced physicochemical and blood compatible nature making it as a promising candidate for wound healing application.

scholarly journals Hydrophobically modified cotton fabric assisted separation of oil-water mixture

2021 ◽  
Author(s):  
Neha Bhatt ◽  
Abhilasha Mishra ◽  
Rekha Goswami
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Contact Angle ◽  
Particle Size ◽  
Free Energy ◽  
Cotton Fabric ◽  
Water Mixture ◽  
Mixture Separation ◽  
Oil Water ◽  
Scanning Electron

Abstract Superhydrophobic-superoleophilic fabrics were prepared and evaluated for oil-water mixture separation efficiencies. The nano-TiO2 and nano- SiO2 based coatings were done on the surface of the cotton fabric to create nanoscale roughness over the surface which was further modified by low energy material 1, 1, 3, 3- Hexamethyldisilazane (HMDS) and, polydimethylsiloxane (PDMS). Particle size and stability of prepared sol were characterized by particle size analysis and zeta potential. Coated cotton fabric samples were characterized by contact angle, contact angle hesteresis and surface free energy for its hydrophobic nature. Surface morphology was studied by scanning electron microscopy (SEM). The coated fabrics were found hydrophobic with low surface free energy values. The maximum contact angle was found 133° and lowest contact angle hysteresis was 5°. Scanning electron microscopy (SEM) confirmed the appearance of nanoscale surface roughness after coating of sols on cotton fabric. The average particle size and zeta potential values of silica sol was 61 nm and 137 mv whereas for titania sol it was found 344 nm and 200 mv respectively. The oil/water separation efficiency of coated fabric was also observed by different oil-water mixture. The coatings were found hydrophobic in nature and seem to be very useful for water/oil mixture separation.

scholarly journals Perkembangan Terkini Membran Guided Tissue Regeneration/Guided Bone Regeneration sebagai Terapi Regenerasi Jaringan Periodontal

2015 ◽  
Vol 1 (1) ◽  
pp. 1
Author(s):  
Cindy Cahaya ◽  
Sri Lelyati C Masulili
Keyword(s):  
Tissue Engineering ◽  
Soft Tissue ◽  
Periodontal Disease ◽  
Tissue Regeneration ◽  
Guided Bone Regeneration ◽  
Guided Tissue Regeneration ◽  
Regenerative Therapy ◽  
Periodontal Tissue ◽  
Barrier Membrane ◽  
Soft Tissue Graft

Periodontitis adalah salah satu penyakit patologis yang mempengaruhi integritas sistem periodontal yang menyebabkan kerusakan jaringan periodontal yang berlanjut pada kehilangan gigi. Beberapa tahun belakangan ini banyak ketertarikan untuk melakukan usaha regenerasi jaringan periodontal, tidak saja untuk menghentikan proses perjalanan penyakit namun juga mengembalikan jaringan periodontal yang telah hilang. Sasaran dari terapi regeneratif periodontal adalah menggantikan tulang, sementum dan ligamentum periodontal pada permukaan gigi yang terkena penyakit. Prosedur regenerasi antara lain berupa soft tissue graft, bone graft, biomodifikasi akar gigi, guided tissue regeneration sertakombinasi prosedur-prosedur di atas, termasuk prosedur bedah restoratif yang berhubungan dengan rehabilitasi oral dengan penempatan dental implan. Pada tingkat selular, regenerasi periodontal adalah proses kompleks yang membutuhkan proliferasi yang terorganisasi, differensiasi dan pengembangan berbagai tipe sel untuk membentuk perlekatan periodontal. Rasionalisasi penggunaan guided tissue regeneration sebagai membran pembatas adalah menahan epitel dan gingiva jaringan pendukung, sebagai barrier membrane mempertahankan ruang dan gigi serta menstabilkan bekuan darah. Pada makalah ini akan dibahas sekilas mengenai 1. Proses penyembuhan terapi periodontal meliputi regenerasi, repair ataupun pembentukan perlekatan baru. 2. Periodontal spesific tissue engineering. 3. Berbagai jenis membran/guided tissue regeneration yang beredar di pasaran dengan keuntungan dan kerugian sekaligus karakteristik masing-masing membran. 4. Perkembangan membran terbaru sebagai terapi regenerasi penyakit periodontal. Tujuan penulisan untuk memberi gambaran masa depan mengenai terapi regenerasi yang menjanjikan sebagai perkembangan terapi penyakit periodontal. Latest Development of Guided Tissue Regeneration and Guided Bone Regeneration Membrane as Regenerative Therapy on Periodontal Tissue. Periodontitis is a patological state which influences the integrity of periodontal system that could lead to the destruction of the periodontal tissue and end up with tooth loss. Currently, there are so many researches and efforts to regenerate periodontal tissue, not only to stop the process of the disease but also to reconstruct the periodontal tissue. Periodontal regenerative therapy aims at directing the growth of new bone, cementum and periodontal ligament on the affected teeth. Regenerative procedures consist of soft tissue graft, bone graft, roots biomodification, guided tissue regeneration and combination of the procedures, including restorative surgical procedure that is connected with oral rehabilitation with implant placement. At cellular phase, periodontal regeneration is a complex process with well-organized proliferation, distinction, and development of various type of cell to form attachment of periodontal tissue. Rationalization of the use of guided tissue regeneration as barrier membrane is to prohibit the penetration of epithelial and connective tissue migration into the defect, to maintain space, and to stabilize the clot. This research discusses: 1. Healing process on periodontal therapy including regeneration, repair or formation of new attachment. 2. Periodontal specific tissue engineering. 3. Various commercially available membrane/guided tissue regeneration in the market with its advantages and disadvantages and their characteristics. 4. Recent advancement of membrane as regenerative therapy on periodontal disease. In addition, this review is presented to give an outlook for promising regenerative therapy as a part of developing knowledge and skills to treat periodontal disease.

scholarly journals Surface Bioactivation of Polyether Ether Ketone (PEEK) by Sulfuric Acid and Piranha Solution: Influence of the Modification Route in Capacity for Inducing Cell Growth

Biomolecules ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 1260
Author(s):  
Flavia Suzany Ferreira dos Santos ◽  
Mariana Vieira ◽  
Henrique Nunes da Silva ◽  
Helena Tomás ◽  
Marcus Vinícius Lia Fook
Keyword(s):  
Contact Angle ◽  
Cell Adhesion ◽  
Sulfuric Acid ◽  
Cell Growth ◽  
Sulfuric Acid Treatment ◽  
Piranha Solution ◽  
Polyether Ether Ketone ◽  
Cell Growth And Proliferation ◽  
Contact Angle Analysis ◽  
Cell Adhesion And Proliferation

The aim of this study was to promote bioactivity of the PEEK surface using sulfuric acid and piranha solution. PEEK was functionalized by a sulfuric acid treatment for 90 s and by piranha solution for 60 and 90 s. Chemical modification of the PEEK surface was evaluated by infrared spectroscopy, contact angle analysis, cytotoxicity, cell adhesion and proliferation. The spectroscopy characteristic band associated with sulfonation was observed in all treated samples. PEEK with piranha solution 60 s showed an increase in the intensity of the bands, which was even more significant for the longer treatment (90 s). The introduction of the sulfonic acid functional group reduced the contact angle. In cytotoxicity assays, for all treatments, the number of viable cells was higher when compared to those of untreated PEEK. PEEK treated with sulfuric acid and piranha solution for 60 s were the treatments that showed the highest percentage of cell viability with no statistically significant differences between them. The modified surfaces had a greater capacity for inducing cell growth, indicative of effective cell adhesion and proliferation. The proposed chemical modifications are promising for the functionalization of PEEK-based implants, as they were effective in promoting bioactivation of the PEEK surface and in stimulating cell growth and proliferation.

scholarly journals Effect of Glow-Discharge Plasma Treatment on Contact Angle and Micromorphology of Bamboo Green Surface

Forests ◽  
2020 ◽  
Vol 11 (12) ◽  
pp. 1293
Author(s):  
Xuehua Wang ◽  
Kenneth J. Cheng
Keyword(s):  
Electron Microscopy ◽  
Contact Angle ◽  
Glow Discharge ◽  
Plasma Treatment ◽  
Discharge Plasma ◽  
Glow Discharge Plasma ◽  
Initial Contact ◽  
Initial Contact Angle ◽  
Utilization Ratio ◽  
Scanning Electron

The inner and outer surfaces of bamboo stems are usually removed prior to the manufacture of bamboo panels because the surfaces are hydrophobic and difficult to bond with glue. Hence, the recovery and utilization ratio of bamboo during processing is low. This study focused on using glow-discharge plasma to treat green bamboo surfaces to make them less hydrophobic. The effects of plasma treatment on green bamboo stems were examined using contact goniometry (wettability), non-contact confocal profilometry and scanning electron microscopy (SEM). Confocal profilometry and SEM revealed that the morphology of green bamboo surfaces varied between 3 different stems. Plasma was able to etch bamboo green surfaces, and make them rougher and more powdery. Plasma treatment was effective at converting green bamboo surfaces from hydrophobic (initial contact angle >110°) to hydrophilic (contact angle <20°). However, this effect was temporary and contact angle increased with time and recovered approximately 30% of its original value after 24 h. Based on our findings, we conclude that plasma treatment can alter parameters such as surface energy and roughness that could improve glue bonding of green bamboo, but delays between plasma treatment and further processing would need to be minimized.

Sign in / Sign up

Export Citation Format

Share Document