scholarly journals Abrasion Behaviour of Different Charcoal Toothpastes When Using Electric Toothbrushes

2021 ◽  
Vol 9 (8) ◽  
pp. 97
Author(s):  
Andreas Greuling ◽  
Johanna Maria Emke ◽  
Michael Eisenburger
Keyword(s):  
In Vitro Study ◽  
Vitro Study ◽  
Human Enamel ◽  
Before And After ◽  
Abrasive Properties ◽  
Group A ◽  
Substance Loss ◽  
Group B ◽  
Post Hoc

Objectives: The purpose of this in vitro study was to compare the abrasion behaviour of different charcoal toothpastes when brushing with electric toothbrushes on human enamel. Materials and Methods: A self-designed brushing machine was built using six commercially available electric toothbrushes in abrasion chambers. Each chamber was constantly supplied with a toothpaste–water mix. Pieces of human enamel, which were embedded in PMMA, were brushed for 4 h. Before and after brushing, profilometer measurements were performed in order to determine the substance loss due to brushing. Results: The following calculated mean removal values (mean ± SD) were found: (4.6 ± 0.6) µm (Group C: Splat Blackwood), (3.2 ± 0.9) µm (Group D: Curaprox Black is White), (2.3 ± 0.7) µm (Group B: Sensodyne Pro Schmelz), (1.7 ± 0.6) µm (Group A: Water), (1.4 ± 0.6) µm (Group E: Prokudent Black Brilliant). A post hoc Tukey HSD test (p = 0.05) showed that the results for Group A/B/E, Group B/D and Group C each lie within subsets that differ statistically significantly from the other subsets. Conclusions: Within the limitations of this in vitro study, it can be stated that some charcoal toothpastes lead to significantly higher abrasion on human enamel, when brushing with electric brushes. Clinical Relevance: As low-abrasion toothpaste is generally advisable, and some charcoal toothpastes should be viewed critically with regard to their abrasive properties.

scholarly journals Influence of scaler tip design on root surface roughness, tooth substance loss and patients’ pain perception: an in vitro and a randomised clinical trial

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Nur Ayman Abdul Hayei ◽  
Noor Azlin Yahya ◽  
Syarida Hasnur Safii ◽  
Roslan Saub ◽  
Rathna Devi Vaithilingam ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Clinical Study ◽  
Pain Perception ◽  
In Vitro Study ◽  
Root Surface ◽  
Vitro Study ◽  
Group A ◽  
Substance Loss ◽  
Group B

Abstract Background The influence of scaler tip design on root surface roughness, tooth substance loss and patients’ pain perception is investigated. Methods This article was divided into the following parts: Part 1 Surface roughness and substance loss: an in vitro study, which involves intact extracted teeth sectioned and treated using a piezoelectric ultrasonic device (PM200 EMS Piezon, Switzerland) with a conventional scaler tip (FS-407) and a Perio Slim (PS) scaler tip (Perio Slim DS-016A). All sectioned samples for tooth surface roughness (n = 20) and tooth substance loss (n = 46) analyses were measured and compared using a 3D surface texture analyser and scanning electron microscope (SEM) respectively, at baseline and following scaling. Part 2 Pain Perception: a clinical study, which was a split mouth study design including 30 participants with gingivitis and/or mild chronic periodontitis; treated with supra-gingival scaling from teeth #13 to #23. Subjects were randomised to group A or group B. Group A was treated first with PS scaler tips, whereas group B was treated first with conventional scaler tips. Pain perception was recorded using the visual analogue scale (VAS). Results In vitro study: both scaler tips caused significant reduction in root substance roughness after scaling (p < 0.05), but no significant difference between the two scaler tips (p > 0.05) was observed. The PS scaler tip caused statistically significantly less root substance loss (p < 0.05) when the initial thickness of the tooth was < 1000 µm. Clinical study: the participants reported significantly lesser pain score during scaling using the PS scaler tip (median: 3) than when using the conventional scaler tip (median: 5) (p < 0.05). Conclusions In the in vitro study, using a slim scaler tip design causes less tooth substance loss compared to a wider scaler tip design. In the clinical study, less pain was observed compared than a wide (conventional) scaler tip design.

scholarly journals Deformation of the Internal Connection of Narrow Implants after Insertion in Dense Bone: An in Vitro Study

Materials ◽  
2019 ◽  
Vol 12 (11) ◽  
pp. 1833 ◽  
Author(s):  
Rafael Delgado-Ruiz ◽  
Ana Nicolas Silvente ◽  
Georgios Romanos
Keyword(s):  
In Vitro Study ◽  
Surface Damage ◽  
Insertion Torque ◽  
Type Ii ◽  
Before And After ◽  
Post Test ◽  
Group A ◽  
Group B ◽  
Connection Length

Implant connections must resist surgical and prosthetic procedures without deformation. This study evaluated the deformation of different internal connections (IC) of narrow dental implants (NDI) after their insertion in artificial dense bone. Thirty NDI, with different IC geometries, Group A (internal hexagon), Group B (tri-channeled), and Group C (four-channeled), with the same length and similar narrow diameters, were inserted in type II density bone blocks. Drilling protocols for dense bone from each implant manufacturer were followed. The Insertion torque (IT), connection length, vertex angles, and wall deformations were analyzed before and after the insertion of the implants. ANOVA (Analysis of Variance) and Tukey post-test were used for statistical comparisons. IT values were higher for Group A, surface damage, and titanium particles were observed in the IC in all the groups. Angle deformations between 5 and 70 degrees were present in all the groups, and the walls of Group B connection were the most affected by deformations (p < 0.05). Within the limitations of this experiment, it can be concluded that narrow diameter implants will suffer deformation of the implant connection and will also experience surface damage and titanium particle release when inserted in type II bone density.

scholarly journals To Evaluate the Marginal Fit of Metal Copings Fabricated by Conventional Casting Procedure and Direct Metal Laser Sintering Technology – an In Vitro Study

2017 ◽  
Vol 05 (01) ◽  
pp. 039-046 ◽  
Author(s):  
Monica Sharma ◽  
Ajay Bansal ◽  
Sunny Panthi ◽  
Shefali Malik ◽  
Atulya Sharma
Keyword(s):  
Glass Ionomer Cement ◽  
In Vitro Study ◽  
Laser Sintering ◽  
Vitro Study ◽  
Direct Metal Laser Sintering ◽  
Marginal Fit ◽  
Significant Difference ◽  
Group A ◽  
Group B

Abstract Purpose: The purpose of this in vitro study was to evaluate marginal fit of cobalt- chromium (Co-Cr) copings fabricated by direct metal laser sintering system (DMLS) and conventional lost-wax technique (LW). Materials and method: Forty tooth preparations were carried out over extracted mandibular molars. They were divided into two groups A and B of 20 each. For group A Co-Cr copings were fabricated by direct metal laser sintering (DMLS) and for group B by lost wax technique (LW). Glass –ionomer cement (GIC) was used to tack the copings over their preparations. Marginal fit was then evaluated directly under the stereomicroscope. Results: The mean marginal gap of group A was 27.9 ± 2.4 μm and group B was 40.4 ±6 μm. Statistical analysis using t - test showed highly significant difference (P>.05) between the marginal mean of the DMLS (group A) compared to LW (group B). Conclusion: The DMLS copings demonstrated superior marginal fit compared to that of conventional Co-Cr casted copings.

scholarly journals Evaluation of the Effect of Water on Three Different Light Cured Composite Restorative Materials Stored in Water: An In Vitro Study

2012 ◽  
Vol 2012 ◽  
pp. 1-5 ◽  
Author(s):  
Basawaraj Biradar ◽  
Sudharani Biradar ◽  
Arvind MS
Keyword(s):  
Water Absorption ◽  
Physical And Mechanical Properties ◽  
In Vitro Study ◽  
Vitro Study ◽  
Weight Changes ◽  
Significant Difference ◽  
Restorative Materials ◽  
Group A ◽  
Group B

Objectives. The objective of this in vitro study was to investigate whether weight gain or loss in the three different composites occurs due to water absorption when they are stored in water.Methods. The composite restorative materials selected for this study included a microfine hybrid (Synergy) and two nanofilled composite restorative materials (Ceram X and Filtek Supreme Ultra). Twenty specimens of each material were fabricated of each composite material. Group A: Filtek Supreme Ultra, Group B: Synergy, Group C: Ceram X. Then all the specimens were stored in 10 ml Distilled water containing test tubes and placed in incubator at 37°C for six weeks. The weight changes of these specimens were measured daily for the first week and later once a week for next five weeks by using an electrical analytical balance.Results.The data was analyzed by one-way analysis of variance and Student'sttest. All groups showed maximum amount of water absorption in the first week than gradual decrease in the water absorption from the second to the sixth week, as compared to the first week and there is no statistically significant difference between the groups tested.Conclusion. All the composite restorative material absorbs some amount of water. The water absorption of the composite may decrease the physical and mechanical properties of the composites; hence it is necessary to consider the type of the material before starting the treatment.

Microleakage and SEM Analysis of Flowable Resin Used as a Sealant Following Three Fissure Preparation Techniques – An in vitro Study

2011 ◽  
Vol 35 (3) ◽  
pp. 277-282 ◽  
Author(s):  
TR Chaitra ◽  
VV Subba Reddy ◽  
GM Devarasa ◽  
TL Ravishankar
Keyword(s):  
Statistical Significance ◽  
In Vitro Study ◽  
Sem Analysis ◽  
Vitro Study ◽  
Blue Dye ◽  
Sem Images ◽  
Group A ◽  
Excellent Method ◽  
Group B

Objective: Preventive procedures using pit and fissure sealants are one of the important aspects of pediatric dental practice. The objectives of this in vitro study were to comparatively evaluate microleakage and resin tag penetration of a flowable resin used as a sealant on molars after preparation with Conventional, Enameloplasty and Fissurotomy techniques. Method: A total of 48 teeth were divided into 3 groups (n-16). Group A(CST),Group B (EST),and Group C (FT). Following the fissure preparation sealant was applied as per manufacturer's instructions. 8 samples in each group were used for Microleakage and Resin tag analysis. Microleakage analysis was done under Stereomicroscope after Methylene blue dye immersion by using scoring system. The resin tag analysis was done by measuring the length of resin tags on scanning electron microscope (SEM) images consisting of 10μm scale taken under optical zoom of 2000 X. Results: Significantly lesser microleakage score (P&lt;0.01) and longer resin tag penetration (P&lt;0.001) observed in EST(mean score 0.5±0.53) & (12.19±1.93μm) when compared to CST(mean score 1.75±0.89) & (5.96±1.84μm)and FT (mean score 1.5±0.53) & (6.76±1.82μm) which showed more microleakage and short resin tags. No statistical significance between CST and FT was found. Conclusion: EST has proven to be an excellent method for preparation of pits and fissures when Flowable composite is used as a sealant because of its lesser microleakage and longer resin tag penetration.

Influence of prophylaxis on the microleakage of sealants: in vitro study

2002 ◽  
Vol 26 (4) ◽  
pp. 371-375 ◽  
Author(s):  
Ana Beatriz Alonso Chevitarese ◽  
Orlando Chevitarese ◽  
Ivete Pomarico Ribeiro de Souza ◽  
Roberto Braga de Carvalho Vianna
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
In Vitro Study ◽  
Optical Microscope ◽  
Vitro Study ◽  
Significant Difference ◽  
Group A ◽  
Group B ◽  
Scanning Electron

The aim of this study was to evaluate the influence of prophylaxis on the sealants microleakage in 30 premolars divided into: Group A, Group B and Group C. The teeth were analyzed using the optical microscope (OM) and at scanning electron microscope (SEM). There was a statitical significant difference among the groups regarding the presence of microleakage, but not with the presence of tags.

scholarly journals Erosive potential of three different commonly used pediatric syrups on deciduous teeth enamel: an in vitro study

2020 ◽  
Vol 7 (10) ◽  
pp. 2041
Author(s):  
Neha Thilak ◽  
Sundeep K. Hedge ◽  
Sham S. Bhat
Keyword(s):  
In Vitro Study ◽  
Titratable Acidity ◽  
Deciduous Teeth ◽  
Hardness Tester ◽  
Titrable Acidity ◽  
Group A ◽  
Group B ◽  
Post Hoc ◽  
Group D

Background: The aim of the study is to compare the erosive potential of three different commonly used pediatric syrups on deciduous teeth enamel. The objectives of the study were to assess the endogeneous pH and titratable acidity of mefenamic acid syrup (meftal P), cetrizine syrup (alerid) and multivitamin syrup (zincovit) and to evaluate the microhardness of the enamel after successive immersion cycles in each of the syrups.Methods: 40 non carious deciduous teeth were included for the study The samples were then randomly allocated into 4 groups (10 in each group): Group A- mefenemic acid syrup (meftal P), Group B- cetrizine syrup (alerid), group C- multivitamin syrup (zincovit) and group D- control (distilled water). The samples were then subjected to the immersion cycles in the syrups. Assessment of enamel surface microhardness was done using Vickers hardness tester at 7th day and 14th day. The pH and titrable acidity of the syrups were also assessed. One way analysis of variance (ANOVA) and post hoc tests were used for the statistical analysis.Results: Out of the test groups, group C showed the lowest pH of around 4.2 and exhibited the largest titrable acidity (22.8 ml) compared with 21 ml in group A and 15.5 ml in group B. At the end of 14th day, group A had microhardness of about 293.43.84±6.34, group B had 299.930±6.85, group C had 313.380±6.23 and group D had 334.190±5.51.Conclusions: All the pediatric liquid medications assessed in the study, meftal P, alerid and zincovit showed acidic pH, high titrable acidities and all the syrups showed loss of microhardness after exposure to the syrups for 14 days. Loss of microhardness was highest for meftal P followed by alerid and least for zincovit.

scholarly journals Evaluation of Marginal Seal and Microleakage of a Sealant Modified with Silver Nanoparticles in Primary Molars: In Vitro Study

2015 ◽  
pp. 107 ◽  
Author(s):  
Elisa Morales-Quiroga ◽  
Alan Martínez-Zumarán ◽  
Juan Francisco Hernández-Sierra ◽  
Amaury Pozos-Guillén
Keyword(s):  
Silver Nanoparticles ◽  
Silver Nanoparticle ◽  
In Vitro Study ◽  
Vitro Study ◽  
Fissure Sealant ◽  
Group A ◽  
Pit And Fissure Sealant ◽  
Incipient Caries ◽  
Group B

<p><span>The objective of this study was to evaluate the marginal seal effectiveness and microleakage of a pit and fissure sealant containing silver nanoparticles (AgNPs). An experimental in vitro study was carried out using 40 extracted temporary molars without caries or incipient caries. These molars were divided into two groups: Group A (20 molars), to which a silver nanoparticle-containing sealant was applied, and Group B (20 molars), to which a conventional sealant was applied. The marginal seal and microleakage were evaluated. No significant differences in the marginal seal or microleakage were noted between the silver nanoparticle-containing sealant and the conventional sealant.The addition of AgNPs does not alter the adhesion or resistance of the sealant. </span></p>

scholarly journals Assessment of Exogenous Pigmentation on Clear Elastomeric Modules: An in vitro Study

2018 ◽  
Vol 8 (1) ◽  
pp. 33-36
Author(s):  
Shaista N Ansari ◽  
Dhananjay Rathod ◽  
G P Rathod ◽  
Gazal Bisht
Keyword(s):  
Methylene Blue ◽  
In Vitro Study ◽  
Vitro Study ◽  
Orthodontic Appliances ◽  
Significant Difference ◽  
Adobe Photoshop ◽  
Group A ◽  
Strong Staining ◽  
Group B

Objective: To assess in vitro changes in the shade of clear elastomeric modules from different manufacturers influenced by exogeneous pigmentation contained in everyday dietary substances.Materials & Method: The specimen comprised of clear elastomeric modules (Group A: Libral, Group B: TP Orthodontics) which were immersed in dietary substances: ketchup, coffee, tea, pepsi & methylene blue. Their hue, saturation and intensity were figured after 72 hours by methods of Adobe photoshop CS3 to mirror the module recoloring seriousness.Result: Significant difference was found between two types of modules analyzed in this study. Ketchup and methylene blue demonstrated higher staining potential compared to other staining media. Besides, there was no significant difference in staining contrast between tea and Pepsi.Conclusion: Ketchup and methylene blue are strong staining media, ought to be avoided by the patients opting for aesthetic orthodontic appliances. Elastomeric modules manufactured by different companies have differing staining potential. 

scholarly journals Assessing Fracture Resistance of Restored Premolars with Novel Composite Materials: An In Vitro Study

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Zahraa Abdulaali Al-Ibraheemi ◽  
Huda Abbas Abdullah ◽  
Nada Abdlameer Jawad ◽  
Julfikar Haider
Keyword(s):  
Fracture Resistance ◽  
Testing Machine ◽  
In Vitro Study ◽  
Vitro Study ◽  
Resistance Testing ◽  
Significant Difference ◽  
Group A ◽  
Group B ◽  
Group D

During restorative treatment, premolars restored with resin filling materials using the conventional incremental-fill technique take longer restoration time and undermine the integrity of the tooth. The aim of this study was to assess fracture resistance of premolars restored by various types of novel bulk-fill composite resin materials. Forty-eight (n = 48) freshly extracted sound maxillary first premolars were used in this in vitro study. The teeth were divided into six groups, each having 8 specimens. Group A (positive control) was allocated for the intact teeth. For specimens in Groups B to F, a large cavity (Class-II MOD) was prepared with a standardized dimension of cavity (3 mm depth on the pulpal floor, 4 mm at the gingival seat, and 3 mm cavity width). Group B represented prepared teeth without any restoration. Group C, Group D, Group E, and Group F were restored with Tetric EvoCeram® incremental-fill (conventional), Beautifil bulk-fill, Filtek posterior bulk-fill, and SonicFill 2 bulk-fill restorative materials, respectively. All samples were finished and polished with an enhanced finishing kit and stored in distilled water for a month before the fracture resistance testing. All the samples were exposed to the axial loading (the speed of crosshead was 1 mm/min) in a computer-controlled universal testing machine (LARYEE, China) via a steel bar (6 mm in diameter) and the maximum applied force in Newton was recorded as the fracture resistance. One-way analysis of variance (SPSS 21) was used to compare the fracture resistance within the groups, and Tukey’s post hoc test was used to determine the difference between the groups. The lowest value of fracture resistance was recorded for Group B, and the highest value was recorded for Group A followed by the values of Group D, Group C, Group F, and Group E. One-way ANOVA revealed a statistically significant difference between the groups ( P < 0.05 ). Nonsignificant difference was found between the premolars restored by bulk-fill and conventional composites. Among the bulk-fill restored specimens, Beautifil restorative demonstrated significantly higher fracture resistance in comparison with the other two bulk-fill restored specimen groups (SonicFill 2 and Filtek). Bulk-fill composite such as Beautifil could be an alternative option to conventional incremental-fill composite for premolar restoration.

Sign in / Sign up

Export Citation Format

Share Document