scholarly journals Measurements of Mobile Blockchain Execution Impact on Smartphone Battery

Data ◽  
2020 ◽  
Vol 5 (3) ◽  
pp. 66 ◽  
Author(s):  
Yulia Bardinova ◽  
Konstantin Zhidanov ◽  
Sergey Bezzateev ◽  
Mikhail Komarov ◽  
Aleksandr Ometov
Keyword(s):  
Human Computer Interaction ◽  
Output Voltage ◽  
Short Range ◽  
Discharge Process ◽  
Output Current ◽  
Output Data ◽  
Lte Networks ◽  
Current Output ◽  
Consensus Algorithms ◽  
Distributed Ledger

This is a data descriptor paper for a set of the battery output data measurements during the turned on display discharge process caused by the execution of modern mobile blockchain projects on Android devices. The measurements were executed for Proof-of-Work (PoW) and Proof-of-Activity (PoA) consensus algorithms. In this descriptor, we give examples of Samsung Galaxy S9 operation while a broader range of measurements is available in the dataset. Examples provide the data about battery output current, output voltage, temperature, and status. We also show the measurements obtained utilizing short-range (IEEE 802.11n) and cellular (LTE) networks. This paper describes the proposed dataset and the method employed to gather the data. To provide a further understanding of the dataset’s nature, an analysis of the collected data is also briefly presented. This dataset may be of interest to both researchers from information security and human–computer interaction fields and industrial distributed ledger/blockchain developers.

scholarly journals Multi-Function Active-Only High-Order Current-Driven Filter

2000 ◽  
Vol 23 (3) ◽  
pp. 157-161
Author(s):  
Muhammad Taher Abuelma'atti ◽  
Husain Abdullah Alzaher
Keyword(s):  
Output Voltage ◽  
High Order ◽  
Input Current ◽  
Operational Amplifiers ◽  
Output Current ◽  
Current Output ◽  
Circuit Topology ◽  
Operational Transconductance Amplifiers ◽  
Order Filter ◽  
Transconductance Amplifiers

A new multi-function high-order current-driven filter is proposed. The filter uses only operational amplifiers, and operational transconductance amplifiers (OTAs). Without using any external passive elements, a variety of high-order input-current/output-current and/or input-current/output-voltage responses can be realised without changing the circuit topology and without any matching or cancellation conditions. The parameters of the high-order filter responses can be electronically tuned by adjusting the bias currents of the OTAs.

scholarly journals Implementation of Buck-Boost Converter as Low Voltage Stabilizer at 15 V

2019 ◽  
Vol 9 (4) ◽  
pp. 2230
Author(s):  
Suwarno Suwarno ◽  
Tole Sutikno
Keyword(s):  
Power Electronics ◽  
Wind Power ◽  
Output Voltage ◽  
Low Voltage ◽  
Input Voltage ◽  
Boost Converter ◽  
Voltage Stabilizer ◽  
Voltage Regulator ◽  
Output Current ◽  
Converter Design

<p>This paper presents the implementation of the buck-boost converter design which is a power electronics applications that can stabilize voltage, even though the input voltage changes. Regulator to stabilize the voltage using PWM pulse that triger pin 2 on XL6009. In this design of buck-boost converter is implemented using the XL6009, LM7815 and TIP2955. LM7815 as output voltage regulator at 15V with 1A output current, while TIP2955 is able to overcome output current up to 5A. When the LM7815 and TIP2955 are connected in parallel, the converter can increase the output current to 6A.. Testing is done using varied voltage sources that can be set. The results obtained from this design can be applied to PV (Photovoltaic) and WP (Wind Power), with changes in input voltage between 3-21V dc can produce output voltage 15V.</p>

Implementation of Coupled Inductor Based 7-level Inverter with Reduced Switches

2017 ◽  
Vol 8 (3) ◽  
pp. 1294 ◽  
Author(s):  
R. Palanisamy ◽  
K. Vijayakumar ◽  
Aishwarya Bagchi ◽  
Vachika Gupta ◽  
Swapnil Sinha
Keyword(s):  
Output Voltage ◽  
Control Algorithm ◽  
Harmonic Distortion ◽  
Current Control ◽  
Output Current ◽  
Hysteresis Current Control ◽  
Common Mode Voltage ◽  
Voltage Stress ◽  
Dsp Controller ◽  
Switching Devices

<p>This paper proposes implementation of coupled inductor based 7 level inverter with reduced number switches. The inverter which generates the sinusoidal output voltage by the use of coupled inductor with reduced total harmonic distortion. The voltage stress on each switching devices, capacitor balancing and common mode voltage can be minimized. The proposed system which gives better controlled output current and improved output voltage with diminished THD value. The switching devices of the system are controlled by using hysteresis current control algorithm by comparing the carrier signals with constant pulses with enclosed hysteresis band value. The simulation and experimental results of the proposed system outputs are verified using matlab/Simulink and TMS320F3825 dsp controller respectively.</p>

scholarly journals A Green Triboelectric Nano-Generator Composite of Degradable Cellulose, Piezoelectric Polymers of PVDF/PA6, and Nanoparticles of BaTiO3

Sensors ◽  
2020 ◽  
Vol 20 (2) ◽  
pp. 506 ◽  
Author(s):  
Zhuangzhi Sun ◽  
Lu Yang ◽  
Sicheng Liu ◽  
Jintao Zhao ◽  
Zhiwei Hu ◽  
...  
Keyword(s):  
Polyvinylidene Fluoride ◽  
Output Voltage ◽  
Short Circuit ◽  
Open Circuit ◽  
Regenerated Cellulose ◽  
Cellulose Membrane ◽  
Output Current ◽  
Pure Cellulose ◽  
Circuit Output ◽  
Peak Value

In this paper, a kind of green triboelectric nano-generator based on natural degradable cellulose is proposed. Different kinds of regenerated cellulose composite layers are prepared by a blending doping method, and then assembled with poly(tetrafluoroethylene) (PTFE) thin films to form tribioelectric nanogenerator (TENG). The results show that the open circuit output voltage and the short circuit output current using a pure cellulose membrane is 7.925 V and 1.095 μA. After adding a certain amount of polyamide (PA6)/polyvinylidene fluoride (PVDF)/barium titanate (BaTiO3), the open circuit output voltage peak and the peak short circuit output current increases by 254.43% (to 20.155 V) and 548.04% (to 6.001 μA). The surface morphology, elemental composition and functional group of different cellulose layers are characterized by Scanning Electronic Microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and tested by the electrochemical analyze. Moreover, after multiple assembly and rectification processing, the electrical output performance shows that the peak value of open-circuit output voltage and the peak value of short circuit output current increases by 132.06% and 116.13%. Within 500 s of the charge-discharge test, the single peak charge reached 3.114 V, and the two peak charges reached 3.840 V. The results demonstrate that the nano-generator based on cellulose showed good stability and reliability, and the application and development of natural biomaterials represented by cellulose are greatly promoted in miniature electronic sensing area.

Comparative Efficiency of Solar Panel by Utilize DC Water Pump and DC Hybrid Cooling System

2015 ◽  
Vol 793 ◽  
pp. 398-402
Author(s):  
Y.M. Irwan ◽  
W.Z. Leow ◽  
M. Irwanto ◽  
M. Fareq ◽  
N. Gomesh ◽  
...  
Keyword(s):  
Output Power ◽  
Solar Irradiance ◽  
Output Voltage ◽  
Cooling System ◽  
Water Pump ◽  
Output Current ◽  
Comparative Efficiency ◽  
Pv Module ◽  
Voltage Output ◽  
Hybrid Cooling

The purpose of this paper is discussed about comparative efficiency of solar panel by utilize DC water pump and DC hybrid cooling system. Ambient temperature and solar irradiance are played main role of the efficiency of PV module. When temperature of PV module increase, the efficiency of PV module will decreased and vice versa. When solar irradiance increase, output current and output power will increase with linear and output voltage will increase with marginal and vice versa. A solution is provided to solve problem of low efficiency of PV module which is DC cooling system. DC brushless fan and water pump with inlet/outlet manifold were designed for actively cool the PV module to improve efficiency of PV cells. The PV module with DC water pump cooling system increase 3.52 %, 36.27 %, 38.98 % in term of output voltage, output current, and output power respectively. It decrease 6.36 °C compare than to PV module without DC water pump cooling system. While PV module with DC hybrid cooling system increase 4.99 %, 39.90 %, 42.65 % in term of output voltage, output current, and output power respectively. It decrease 6.79 °C compare to PV module without DC water pump cooling system. The higher efficiency of PV module, the payback period of the system can be shorted and the lifespan of PV module can be longer.

Induction Motor Conditional Monitoring Using Wireless Sensor Network

2014 ◽  
Vol 626 ◽  
pp. 95-100 ◽  
Author(s):  
P. Shoba ◽  
B. Arivuselvam
Keyword(s):  
Wireless Sensor Network ◽  
Embedded System ◽  
Sensor Network ◽  
Output Voltage ◽  
Wireless Sensor ◽  
Maintenance Cost ◽  
Output Current ◽  
Non Invasive ◽  
Torque Estimation ◽  
The Embedded System

This system is used for monitoring the speed, torque, efficiency, voltage & current by employing ZigBee based wireless sensor network. Embedded system is used for acquiring electrical signals from the motors in a non-invasive way. The speed and torque estimation is done locally. An embedded system is used to control the speed of the motor the values calculated by the embedded system are transmitted to the monitoring unit through ZigBee based wireless sensor network and it can be monitored locally in PC. The main advantages of using ZigBee are low maintenance cost, security, reliability and through output. Using simulation, the characteristic graph for speed, torque, output voltage and output current can be obtained.

Sign in / Sign up

Export Citation Format

Share Document