scholarly journals Synthesis and Characterization of a New Aluminum-Doped Bismuth Subcarbonate

Crystals ◽  
2019 ◽  
Vol 9 (9) ◽  
pp. 466
Author(s):  
Loisangela Álvarez ◽  
Blanca Rojas de Gascue ◽  
Rolando J. Tremont ◽  
Edgar Márquez ◽  
Euclides J. Velazco
Keyword(s):  
Infrared Spectroscopy ◽  
Photoelectron Spectroscopy ◽  
Energy Dispersive ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Characterization Methods ◽  
X Ray ◽  
Fourier Transformed Infrared Spectroscopy ◽  
Anionic Part

A new compound, Bi2O2CO3:Al, was synthesized by the coprecipitation method. The characterization was done by X-ray diffraction (XRD), Fourier transformed infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), electronic scanning microscopy (SEM), and energy dispersive X-ray spectroscopy (EDX). The characterization methods allowed to identify the Bi2O2CO3:Al compound, such as the Al-doped Bi2O2CO3 by XRD, the anionic part (CO32−) by FTIR, and the presence of aluminum in the compound by XPS and EDX. It was confirmed to have a nanostructure like a nanosheet and a microstructure that resembles a type sponge by SEM.

Synthesis and characterization of homogeneous lead-substituted tin oxide with the (110) face of rutile structure

2000 ◽  
Vol 15 (10) ◽  
pp. 2076-2079
Author(s):  
Chika Nozaki ◽  
Takashi Yamada ◽  
Kenji Tabata ◽  
Eiji Suzuki
Keyword(s):  
Electron Microscopy ◽  
Tin Oxide ◽  
Photoelectron Spectroscopy ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Rutile Structure ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Synthesis of a rutile-type lead-substituted tin oxide with (110) face was investigated. The characterization was performed by x-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy dispersive x-ray spectroscopy, infrared spectroscopy, x-ray photoelectron spectroscopy, and Brunauer–Emmett–Teller surface area measurements. The homogeneous rutile-type lead-substituted tin oxide was obtained until 4.1 mol% of tin was substituted with lead. The surface of obtained oxide had a homogeneously lead-substituted (110) face.

Synthesis and Characterization of Copper(II) Complexes with Long Chain Dithiocarbamates

2014 ◽  
Vol 976 ◽  
pp. 164-168 ◽  
Author(s):  
Nayely Torres-Gomez ◽  
Alfredo R. Vilchis-Nestor ◽  
Rosa Maria Gomez-Espinosa ◽  
Ivan Garcia-Orozco
Keyword(s):  
Infrared Spectroscopy ◽  
Copper Complexes ◽  
Nanocrystalline Structure ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Long Chain ◽  
Scanning Electron

Copper complexes of dithiocarbamates ligands were obtained from RNH2 (R = C6H13-, C12H25- y C18H37-) and an excess of CS2 in the presence of NaOH. Sodium hexyldithiocarbamate is not possible to isolate from solution but the other two were obtained and characterizedby infrared spectroscopy, UV-vis and powder X-ray diffraction. Copper complexes were obtained in situ from ligand solution as greenish powders. All the complexes were characterized by infrared spectroscopy, UV-vis, powder X-ray diffraction and Scanning Electron Microscopy. The complexes show an amorphous phase in the case of DCu12 and nanocrystalline structure for DCu18, as observed in XRD.

Synthesis and Characterization of Polyaniline Copolymer

2012 ◽  
Vol 217-219 ◽  
pp. 551-554
Author(s):  
Ting Xi Li ◽  
Yu Hua Zhao ◽  
Qian Li ◽  
Cheng Qian Yuan ◽  
Quan Liang Chen ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Infrared Spectroscopy ◽  
Thermogravimetric Analysis ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ft Ir ◽  
The Difference ◽  
Thermal Stability Of

Abstract. Polyaniline (PANI) and p-phenylenediamine (p-PDA)-aniline copolymer were prepared via a same microemulsion method. The structures of the PANI and p-PDA-aniline copolymer were characterized by infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermogravimetric analysis（TGA）. The results revealed the difference of synthesis and characterization between PANI and p-PDA-aniline copolymer. It was shown that structure of the copolymer is almost similar to that of PANI, but the p-PDA-aniline copolymer has a better crystallization than PANI, and the thermal stability of the copolymer is higher than that of pure PANI.

Chemical synthesis and characterization of polyaniline-molybdenum trisulfide composite

1999 ◽  
Vol 14 (5) ◽  
pp. 1805-1813 ◽  
Author(s):  
Florence Fusalba ◽  
Daniel Bélanger
Keyword(s):  
Aqueous Solution ◽  
Photoelectron Spectroscopy ◽  
Synthesis And Characterization ◽  
Scanning Electron Micrographs ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Chemical Polymerization ◽  
X Ray ◽  
Scanning Electron

A novel polyaniline-molybdenum trisulfide composite has been prepared by chemical polymerization from an acidic (1 M HCl) aqueous solution containing aniline and ammonium tetrathiomolybdate. The presence of molybdenum trisulfide in the polyaniline matrix induces morphological change to the polymer as evidenced by scanning electron micrographs. X-ray diffraction and differential scanning calorimetry indicate that polyaniline-molybdenum trisulfide is slightly less crystalline than polyaniline-HCl. X-ray photoelectron spectroscopy (XPS) and elemental analysis have been used to confirm the presence of molybdenum trisulfide in the polymer matrix. The XPS data also confirm that molybdenum trisulfide and tetrathiomolybdate anions are present with polyaniline to form a new inorganic-organic composite.

Synthesis and characterization of a new trimetallic compound (NH4)Ni2.4Co0.6O(OH)(MoO4)2•1.5H2O

2014 ◽  
Vol 29 (4) ◽  
pp. 379-382 ◽  
Author(s):  
Sandra Amaya ◽  
Johana Arboleda ◽  
Adriana Echavarría
Keyword(s):  
Thermal Analysis ◽  
Laser Raman Spectroscopy ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Unit Cell Parameters ◽  
X Ray ◽  
Cell Parameters ◽  
Laser Raman ◽  
Fourier Transformed Infrared Spectroscopy

A new trimetallic compound with formula (NH4)Ni2.4Co0.6O(OH)(MoO4)2•1.5H2O was obtained by hydrothermal synthesis. The solid was characterized by X-ray diffraction, thermal analysis (thermogravimetric analysis and differential thermal analysis), Fourier-transformed infrared spectroscopy, Laser Raman spectroscopy, and chemical analysis by atomic absorption, confirming the formation of the layered phase ϕy. Crystallographic studies showed that the compound obtained is trigonal with hexagonal unit-cell parameters, a = 6.0468 ± 0.0016 Å and c = 21.8433 ± 0.0001 Å, and space group R-3m.

Hydrothermal synthesis and characterization of a new potassium phosphatoantimonate

1994 ◽  
Vol 9 (11) ◽  
pp. 2745-2746 ◽  
Author(s):  
Yonglin An ◽  
Shouhua Feng ◽  
Yihua Xu ◽  
Ruren Xu ◽  
Yong Yue
Keyword(s):  
Photoelectron Spectroscopy ◽  
Synthesis And Characterization ◽  
Composition Analysis ◽  
X Ray Diffraction ◽  
Monoclinic System ◽  
X Ray ◽  
Monovalent Ions ◽  
Nmr Techniques ◽  
Chemical Composition Analysis

A new potassium phosphatoantimonate with a composition of 4K2O · 4Sb2O5 · P2O5 · 8H2O, which crystallizes in a monoclinic system with a = 23.952 Å, b = 9.515 Å, c = 8.193 Å, and β = 124.77, was hydrothermally synthesized and characterized by powder x-ray diffraction, chemical composition analysis, x-ray photoelectron spectroscopy, and 31P MAS-NMR techniques. The potassium ion can be exchanged by other monovalent ions.

scholarly journals SYNTHESIS AND CHARACTERIZATION OF FEED GRADE MONOCALCIUM PHOSPHATE, Ca(H2PO4)2·H2O IN AQUEOUS MEDIUM

2018 ◽  
Vol 54 (4A) ◽  
pp. 7
Author(s):  
Nguyen Quang Bac
Keyword(s):  
Thermal Analysis ◽  
Aqueous Solution ◽  
Infrared Spectroscopy ◽  
Elevated Temperature ◽  
Calcium Content ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Monocalcium Phosphate ◽  
X Ray

The feed grade monocalcium phosphate monohydrate, Ca(H2PO4)2·H2O was prepared by the reaction of CaCO3 and H3PO4 at elevated temperature in aqueous solution. The obtained precipitates were characterized by powder X-ray diffraction, infrared spectroscopy (FTIR), and thermal analysis (TG, DTA) techniques. The chemical composition of final products was evaluated by analysing the phosphorus and calcium content in the samples.

Synthesis and Characterization of Novel Organomodified Nanoclays for Application in Dental Materials

2019 ◽  
Vol >15 (5) ◽  
pp. 512-524 ◽  
Author(s):  
Alexandros K. Nikolaidis ◽  
Elisabeth A. Koulaouzidou ◽  
Dimitris S. Achilias
Keyword(s):  
Fourier Transform ◽  
Infrared Spectroscopy ◽  
Thermogravimetric Analysis ◽  
Fourier Transform Infrared Spectroscopy ◽  
Quaternary Ammonium ◽  
Fourier Transform Infrared ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray

Background: Nanoclays incorporated in dental resins have been previously investigated. However, limited reports are associated with nanoclays that exhibit high functionality. Objective: The aim of this study was the targeted synthesis and characterization of organomodified nanoclays with methacrylic groups suitable for incorporation in dental nanocomposite resins. Methods: Quaternary ammonium methacrylates were synthesized and characterized by means of proton nuclear magnetic resonance and Fourier-transform infrared spectroscopy. Consequently, they were inserted into the interlayer space of nanoclay through a cation exchange reaction, while silane was also used for simultaneous surface modification. The produced organomodified nanoclays were characterized by means of X-ray diffraction, Fourier-transform infrared spectroscopy and thermogravimetric analysis. Results: Fourier-transform infrared spectra confirmed the successful synthesis of the quaternary ammonium methacrylates. X-ray diffraction analysis showed that organoclays exhibited higher d001- values (up to 1.78 nm) compared to raw nanoclay (1.37 nm), indicating an accomplished intercalation in each case. X-ray diffraction spectra mainly disclosed the presence of methacrylic functional groups in all nanoclays. Thermogravimetric analysis curves verified the different thermal stability of organoclays due to the diversity of their organic modifiers. Conclusion: The experimental results showed that nanoclay was successfully modified with ammonium methacrylates and silane. Τhe combination of X-ray diffraction and thermogravimetric analysis data revealed a high degree of intercalation and methacrylated organic loading as well. These phenomena may favor a good dispersion and high polymerization degree of nanoclays with dental resin monomers, rendering them potentially useful materials for the development of advanced dental nanocomposites resins.

Sign in / Sign up

Export Citation Format

Share Document