scholarly journals Ultraviolet Light Effects on Cobalt–Thiourea Complexes Crystallization

Crystals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 473
Author(s):  
Luis Eduardo Trujillo Villanueva ◽  
Felipe Legorreta García ◽  
Fidel Pérez Moreno ◽  
Marius Ramírez Cardona ◽  
Edgar Arturo Chávez Urbiola
Keyword(s):  
Ultraviolet Light ◽  
Structural Modification ◽  
Uv Light ◽  
X Ray Diffraction ◽  
X Ray ◽  
Evaporation Technique ◽  
Light Effects ◽  
Crystal Synthesis ◽  
Crystalline Forms ◽  
Shape Changes

In this work, a cobalt–thiourea complexes crystal synthesis was carried out comparatively with and without ultraviolet light assistance (λ = 253 nm), and its effect was studied. Through the solvent evaporation technique, crystalline forms were obtained, which were analyzed and characterized by different techniques: Raman spectroscopy, X-ray diffraction (XRD), and digital optical microscopy. Crystal’s shape changes were observed when comparing those obtained from the solution with and without ultraviolet (UV) assistance. It was found that the UV light effect on the crystals causes a structural modification of the complex synthesized in the (022) (120) planes and without UV assistance in the (002), (111), (131¯), and (132¯) planes. It is also possible to observe an increase in intensity by Raman spectra identified as Co–S bonds (297 cm−1) for crystals synthesized with UV assistance.

Structural and optical properties of Tin Oxide and Indium doped SnO2 thin films deposited by thermal evaporation technique

2016 ◽  
Vol 12 (3) ◽  
pp. 4394-4399
Author(s):  
Sura Ali Noaman ◽  
Rashid Owaid Kadhim ◽  
Saleem Azara Hussain
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Tin Oxide ◽  
Thermal Evaporation ◽  
Pure Sno2 ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
X Ray ◽  
Evaporation Technique ◽  
Sno2 Thin Films

Tin Oxide and Indium doped Tin Oxide (SnO2:In) thin films were deposited on glass and Silicon  substrates  by  thermal evaporation technique.  X-ray diffraction pattern of  pure SnO2 and SnO2:In thin films annealed at 650oC and the results showed  that the structure have tetragonal phase with preferred orientation in (110) plane. AFM studies showed an inhibition of grain growth with increase in indium concentration. SEM studies of pure  SnO2 and  Indium doped tin oxide (SnO2:In) ) thin films showed that the films with regular distribution of particles and they have spherical shape.  Optical properties such as  Transmission , optical band-gap have been measured and calculated.

Effect of trytophan as dopant on potassium acid phthalate single crystals

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Single Crystals ◽  
Room Temperature ◽  
Visible Region ◽  
X Ray Diffraction ◽  
X Ray ◽  
Slow Evaporation Technique ◽  
Absorption Studies ◽  
Evaporation Technique ◽  
Potassium Acid Phthalate ◽  
Acid Phthalate

Optically transparent single crystals of potassium acid phthalate (KAP, 0.5 g) 0.05 g and 0.1 g (1 and 2 mol %) trytophan were grown in aqueous solution by slow evaporation technique at room temperature. Single crystal X- ray diffraction analysis confirmed the changes in the lattice parameters of the doped crystals. The presence of functional groups in the crystal lattice has been determined qualitatively by FTIR analysis. Optical absorption studies revealed that the doped crystals possess very low absorption in the entire visible region. The dielectric constant has been studied as a function of frequency for the doped crystals. The thermal stability was evaluated by TG-DSC analysis.

Synthesis, crystal structure, luminescence, and photocatalytic properties of a 2D Cu(II) metal-organic frameworks based on 3,5-di(1H-benzimidazol-1-yl)pyridine and 4,4′-oxybis(benzoate) ligands

2020 ◽  
Vol 75 (8) ◽  
pp. 727-732
Author(s):  
Chen Zhang ◽  
Jian-Qing Tao
Keyword(s):  
Crystal Structure ◽  
Thermal Analysis ◽  
Uv Light ◽  
Metal Organic Framework ◽  
Metal Organic Frameworks ◽  
X Ray Diffraction ◽  
X Ray ◽  
Uv Light Irradiation ◽  
Photocatalytic Activities ◽  
Metal Organic

AbstractA new Cu(II) metal-organic framework, [Cu(L)(OBA)·H2O]n (1) [H2OBA = 4,4′-oxybis(benzoic acid), L = 3,5-di(1H-benzimidazol-1-yl)pyridine] was hydrothermally synthesized and characterized through IR spectroscopy, elemental and thermal analysis and single-crystal X-ray diffraction. Complex 1 is a four-connected uni-nodal 2D net with a (44·62) topology which shows an emission centered at λ ∼393 nm upon excitation at λ = 245 nm. Moreover, complex 1 possesses high photocatalytic activities for the decomposition of Rhodamine B (RhB) under UV light irradiation.

X-ray Diffraction Analysis of Hexagonal Klockmannite CuSe Nanoparticles for Photodetectors under UV Light

2021 ◽  
Vol 125 (6) ◽  
pp. 3517-3526
Author(s):  
Kunjal Patel ◽  
G. K. Solanki ◽  
K. D. Patel ◽  
V. M. Pathak
Keyword(s):  
Diffraction Analysis ◽  
Uv Light ◽  
X Ray Diffraction ◽  
X Ray

scholarly journals Born out of Fire and Ice: Polymorph Studies of the Antiviral Famciclovir

Crystals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 129
Author(s):  
Liana Vella-Zarb ◽  
Ulrich Baisch
Keyword(s):  
Variable Temperature ◽  
Chemical Properties ◽  
Crystal Form ◽  
X Ray Diffraction ◽  
Crystal Forms ◽  
X Ray ◽  
Physical Chemical ◽  
Diffraction Patterns ◽  
Crystalline Forms

There is much interest and focus on solid forms of famciclovir. However, in spite of the abundance of reported differences in oral bioavailability, compressibility, and other physical–chemical properties of the various crystal forms of this drug, very little precise structural analysis is available in the literature to date. The form used in the commercial formulation is the anhydrous form I. Patents and patent applications report three different anhydrous crystalline forms on the basis of unindexed powder diffraction patterns. Single-crystal and variable-temperature X-ray diffraction experiments using the commercially available anhydrous form of famciclovir were carried out and led not only to the crystal structure determination of the anhydrous form I, but also to discovery of a new crystal form of anhydrous famciclovir from powder data.

scholarly journals A preliminary study on antifungal effect of TiO2-based paints in natural indoor light

2010 ◽  
Vol 12 (4) ◽  
pp. 53-57 ◽  
Author(s):  
Agata Markowska-Szczupak ◽  
Krzysztof Ulfig ◽  
Barbara Grzmil ◽  
Antoni Morawski
Keyword(s):  
Antifungal Activity ◽  
Aspergillus Niger ◽  
Trichoderma Viride ◽  
Photocatalytic Reaction ◽  
X Ray Diffraction ◽  
Antifungal Effect ◽  
X Ray ◽  
Preliminary Study ◽  
Crystalline Forms ◽  
Growth Of Fungi

A preliminary study on antifungal effect of TiO2-based paints in natural indoor light The antifungal activity of four commercial photocatalytic paints (KEIM Ecosil ME, Titanium FA, Photo Silicate and Silicate D) in natural indoor light was investigated. The paints contained TiO2 in rutile and anatase crystalline forms as evidenced by means of the X-ray diffraction analysis. In most cases the paints inhibited growth of fungi viz. Trichoderma viride, Aspergillus niger, Coonemeria crustacea, Eurotium herbariorum, and Dactylomyces sp. The KEIM Ecosil ME paint displayed the highest antifungal effect in the light, which could be explained with the highest anatase content. The paint antifungal activity and the fungal sensitivity to the TiO2-mediated photocatalytic reaction both decreased in the following orders: KEIM Ecosil ME > Titanium FA > Photo Silicate > Silicate D and T. viride > Dactylomyces sp. > A. niger > E. herbariorum.

Photocatalytic Activity of Fe-Doped ZnO/Montmorillonite Nanocomposite for Degradation of Malachite Green

2015 ◽  
Vol 827 ◽  
pp. 19-24 ◽  
Author(s):  
Nur Afifah ◽  
Nadia Febiana Djaja ◽  
Rosari Saleh
Keyword(s):  
Photocatalytic Activity ◽  
Malachite Green ◽  
Organic Dyes ◽  
Uv Light ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Spin Resonance ◽  
Doped Zno ◽  
Co Precipitation

In this study, the photocatalytic activity of pure Fe- doped ZnO and Fe- doped ZnO/Montmorillonite nanocomposite has been investigated for the degradation of malachite green under UV light irradiation. Both photocatalysts were synthesized using co-precipitation method and characterized by X-ray diffraction, energy dispersive X-ray spectroscopy, Fourier-transform infrared absorption, and electron spin resonance. The results showed that the photocatalytic efficiency is better in the presence of montmorillonite compared to pure Fe- doped ZnO. To detect the possible reactive species involved in degradation of organic dyes control experiments with introducing scavengers into the solution of organic dyes were carried out. It is found that electron plays an important role in the degradation of malachite green.

scholarly journals c-Perpendicular Orientation of Poly(ʟ-lactide) Films

Polymers ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 1572
Author(s):  
Baku Nagendra ◽  
Paola Rizzo ◽  
Christophe Daniel ◽  
Lucia Baldino ◽  
Gaetano Guerra
Keyword(s):  
Low Temperature ◽  
Film Plane ◽  
Wide Angle ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
Amorphous Films ◽  
High Transparency ◽  
X Ray ◽  
Crystalline Forms ◽  
Induced Crystallization

Poly(ʟ-lactide) (PLLA) films, even of high thickness, exhibiting co-crystalline and crystalline α phases with their chain axes preferentially perpendicular to the film plane (c⊥ orientation) have been obtained. This c⊥ orientation, unprecedented for PLLA films, can be achieved by the crystallization of amorphous films as induced by low-temperature sorption of molecules being suitable as guests of PLLA co-crystalline forms, such as N,N-dimethylformamide, cyclopentanone or 1,3-dioxolane. This kind of orientation is shown and quantified by two-dimensional wide-angle X-ray diffraction (2D-WAXD) patterns, as taken with the X-ray beam parallel to the film plane (EDGE patterns), which present all the hk0 arcs centered on the meridian. PLLA α-form films, as obtained by low-temperature guest-induced crystallization, also exhibit high transparency, being not far from those of the starting amorphous films.

ROOM TEMPERATURE PHOTOLUMINESCENCE OF POLYCRYSTALLINE SIC PREPARED FROM CARBON-SATURATED SI MELT

2002 ◽  
Vol 16 (06n07) ◽  
pp. 1047-1051
Author(s):  
JIANPING MA ◽  
ZHIMING CHEN ◽  
GANG LU ◽  
MINGBIN YU ◽  
LIANMAO HANG ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Room Temperature ◽  
Uv Light ◽  
X Ray Diffraction ◽  
X Ray ◽  
Room Temperature Photoluminescence ◽  
Composition And Structure ◽  
Light Excitation ◽  
Scanning Electron

Intense photoluminescence (PL) has been observed at room temperature from the polycrystalline SiC samples prepared from carbon-saturated Si melt at a temperature ranging from 1500 to 1650°C. Composition and structure of the samples have been confirmed by means of X-ray photoelectron spectroscopy, X-ray diffraction and scanning electron microscopy. PL measurements with 325 nm UV light excitation revealed that the room temperature PL spectrum of the samples consists of 3 luminescent bands, the peak energies of which are 2.38 eV, 2.77 eV and 3.06 eV, respectively. The 2.38 eV band is much stronger than the others. It is suggested that some extrinsic PL mechanisms associated with defect or interface states would be responsible to the intensive PL observed at room temperature.

TiO2 nanofibers fabricated by electrospinning technique and degradation of MO dye under UV light

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Naveen Thakur ◽  
Nikesh Thakur ◽  
Viplove Bhullar ◽  
Saurabh Sharma ◽  
Aman Mahajan ◽  
...  
Keyword(s):  
Raman Spectroscopy ◽  
Fiber Diameter ◽  
Uv Light ◽  
Rutile Phase ◽  
Powder Form ◽  
X Ray Diffraction ◽  
Electrospinning Technique ◽  
Tio2 Nanofibers ◽  
X Ray ◽  
Uv Visible

Abstract Titanium dioxide (TiO2) nanofibers were synthesized by electrospinning to optimize the photocatalytic action efficiency. The synthesis of the fibers was carried out at four different wt% concentrations: 8, 9, 10 & 11% of polymer polyvinylpyrrolidone (PVP). The TiO2 fibers were further calcined at 700 °C to get powder form. The uncalcinated and calcined TiO2 nanofibers were characterized by using X-Ray diffraction (XRD), Raman spectroscopy, Scanning electron microscopy (SEM) and UV-Visible spectroscopy. Raman spectroscopy confirmed the rutile phase of the calcined TiO2nanofibers in powder form with a crystallite size of 34–38 nm. The surface morphology of the uncalcinated and calcined TiO2 nanofibers was examined by SEM and the fiber diameter found to be 360–540 nm. The optical bandgap of the calcined TiO2 nanofibers was found in the range of 3.29–3.24 eV. The photocatalytic activity of the TiO2 nanofibers as examined for uncalcinated and calcined nanofibers, methyl orange (MO) dye degraded up to 98 and 78%, respectively in 180 min under the exposure of UV light. Uncalcinated TiO2 nanofibers were found more suitable for degradation of MO dye as compared to calcined nanofibers.

Sign in / Sign up

Export Citation Format

Share Document