scholarly journals Porous Characteristics of Three-Dimensional Disordered Graphene Networks

Crystals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 127
Author(s):  
YongChao Wang ◽  
YinBo Zhu ◽  
HengAn Wu
Keyword(s):  
Pore Size ◽  
Low Temperatures ◽  
Gas Adsorption ◽  
Three Dimensional ◽  
Md Simulations ◽  
Structural Features ◽  
Atomic Scale ◽  
Critical Factors ◽  
Chlorination Process ◽  
Porous Morphology

The porous characteristics of disordered carbons are critical factors to their performance on hydrogen storage and electrochemical capacitors. Even though the porous information can be estimated indirectly by gas adsorption experiments, it is still hard to directly characterize the porous morphology considering the complex 3D connectivity. To this end, we construct full-atom disordered graphene networks (DGNs) by mimicking the chlorination process of carbide-derived carbons using annealing-MD simulations, which could model the structure of disordered carbons at the atomic scale. The porous characteristics, including pore volume, pore size distribution (PSD), and specific surface area (SSA), were then computed from the coordinates of carbon atoms. From the evolution of structural features, pores grow dramatically during the formation of polyaromatic fragments and sequent disordered framework. Then structure is further graphitized while the PSD shows little change. For the obtained DGNs, the porosity, pore size, and SSA increase with decreasing density. Furthermore, SSA tends to saturate in the low-density range. The DGNs annealed at low temperatures exhibit larger SSA than high-temperature DGNs because of the abundant free edges.

scholarly journals Stress Distribution in Silicon Subjected to Atomic Scale Grinding with a Curved Tool Path

Materials ◽  
2020 ◽  
Vol 13 (7) ◽  
pp. 1710 ◽  
Author(s):  
Xudong Fang ◽  
Qiang Kang ◽  
Jianjun Ding ◽  
Lin Sun ◽  
Ryutaro Maeda ◽  
...  
Keyword(s):  
Stress Distribution ◽  
Hydrostatic Stress ◽  
Three Dimensional ◽  
Md Simulations ◽  
Atomic Scale ◽  
Shear Stresses ◽  
Asymmetric Distribution ◽  
Tool Paths ◽  
Tool Trajectory ◽  
Fundamental Mechanism

Molecular dynamics (MD) simulations were applied to study the fundamental mechanism of nanoscale grinding with a modeled tool trajectory of straight lines. Nevertheless, these models ignore curvature changes of actual tool paths, which need optimization to facilitate understanding of the underlying science of the machining processes. In this work, a three-dimensional MD model considering the effect of tool paths was employed to investigate distributions of stresses including hydrostatic stress, von Mises stress, normal and shear stresses during atomic grinding. Simulation results showed that average values of the stresses are greatly influenced by the radius of the tool trajectory and the grinding depth. Besides the averaged stresses, plane stress distribution was also analyzed, which was obtained by intercepting stresses on the internal planes of the workpiece. For the case of a grinding depth of 25 Å and an arc radius 40 Å, snapshots of the stresses on the X–Y, X–Z and Y–Z planes showed internal stress concentration. The results show that phase transformation occurred from α- silicon to β- silicon in the region with hydrostatic stress over 8 GPa. Moreover, lateral snapshots of the three-dimensional stress distribution are comprehensively discussed. It can be deduced from MD simulations of stress distribution in monocrystalline silicon with the designed new model that a curved tool trajectory leads to asymmetric distribution and concentration of stress during atomic-scale grinding. The analysis of stress distribution with varying curve geometries and cutting depths can aid fundamental mechanism development in nanomanufacturing and provide theoretical support for ultraprecision grinding.

Methods for making stereoslides and -prints, with freeze-etched olfactory epithelium as example

1984 ◽  
Vol 42 ◽  
pp. 704-705
Author(s):  
Bert Ph. M. Menco ◽  
Ido F. Menco ◽  
Frans L.T. Verdonk
Keyword(s):  
Electron Microscope ◽  
Olfactory Epithelium ◽  
Three Dimensional ◽  
Supporting Cell ◽  
Structural Features ◽  
Extensive Study ◽  
Sprague Dawley ◽  
Freezing Method ◽  
Respiratory Epithelia ◽  
Three Dimensional Presentation

Previously we presented an extensive study of the distributions of intramembranous particles of structures in apical surfaces of nasal olfactory and respiratory epithelia of the Sprague-Dawley rat. For the same structures these distributions were compared in samples which were i) chemically fixed and cryo-protected with glycerol before cryo-fixation, after excision, and ii)ultra-rapidly frozen by means of the slam-freezing method. Since a three-dimensional presentation markedly improves visualization of structural features micrographs were presented as stereopairs. Two exposures were made by tiling the sample stage of the electron microscope 6° in either direction with an eucentric goniometer. The negatives (Agfa Pan 25 Professional) were reversed with Kodak Technical Pan Film 2415 developed in D76 1:1. The prints were made from these reversed negatives. As an example tight-junctional features of an olfactory supporting cell in a region where this cell conjoined with two other cells are presented (Fig. 1).

Three Dimensional Structure of UMo8O26: Ordering of U-Vacancies

2002 ◽  
Vol 718 ◽  
Author(s):  
N.D. Zakharov ◽  
P. Werner
Keyword(s):  
Low Temperatures ◽  
Driving Force ◽  
Three Dimensional ◽  
Solid State Reaction Method ◽  
Dimensional Structure ◽  
Unit Cell Parameters ◽  
Cell Parameters ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Edx Microanalysis

AbstractThe structure and composition of UMo8O26 synthesized by solid state reaction method have been investigated by High Resolution Transmission Electron Microscopy (HRTEM), Selected Area Electron Diffraction, and EDX microanalysis. The ordering of U vacancies results in considerable enlargement of unit cell parameters: an=6.44 nm, bn=1.45 nm, cn=1.6 nm. It is build up of four layers piled up in c direction. Each following layer is shifted relative to previous one by vector bn/4. Eight hexagonal tunnels in each layer are filled by U atoms, while the eight others are vacant (V). Interaction between U cations and vacancies is driving force for ordering. The variation of stoichiometry can be a reason for appearance of incommensurate modulations in these crystals. It seems plausible that this structure might also exhibit superconductivity at low temperatures.

Effect of the hydrophilicity of the polymer matrix on immobilized α-chymotrypsin

1984 ◽  
Vol 49 (6) ◽  
pp. 1552-1556
Author(s):  
Minoru Kumakura ◽  
Isso Kaetsu
Keyword(s):  
Thermal Stability ◽  
Enzyme Activity ◽  
Pore Size ◽  
Polymer Matrix ◽  
Low Temperatures ◽  
Radiation Polymerization ◽  
Thermal Stability Of

α-Chymotrypsin was immobilized by radiation polymerization at low temperatures and the effect of the hydrophilicity of the polymer matrix on the enzyme activity and thermal stability was studied. The activity and thermal stability of immobilized chymotrypsin increased with the increasing hydrophilicity of the polymer matrix or monomer. The thermal stability was affected by the form and pore size of the polymer matrix; chymotrypsin immobilized on a soft-gel polymer matrix exhibited an enhanced thermal stability.

Structural insights into the repair mechanism of AGT for methyl-induced DNA damage

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Rajendra P. Koirala ◽  
Rudramani Pokhrel ◽  
Prabin Baral ◽  
Purushottam B. Tiwari ◽  
Prem P. Chapagain ◽  
...  
Keyword(s):  
Covalent Bond ◽  
Cancer Therapeutics ◽  
Md Simulations ◽  
Structural Features ◽  
Umbrella Sampling ◽  
Repair Mechanism ◽  
Structural Investigations ◽  
Methylated Dna ◽  
Dna Base ◽  
Dna Alkyltransferase

Abstract Methylation induced DNA base-pairing damage is one of the major causes of cancer. O6-alkylguanine-DNA alkyltransferase (AGT) is considered a demethylation agent of the methylated DNA. Structural investigations with thermodynamic properties of the AGT-DNA complex are still lacking. In this report, we modeled two catalytic states of AGT-DNA interactions and an AGT-DNA covalent complex and explored structural features using molecular dynamics (MD) simulations. We utilized the umbrella sampling method to investigate the changes in the free energy of the interactions in two different AGT-DNA catalytic states, one with methylated GUA in DNA and the other with methylated CYS145 in AGT. These non-covalent complexes represent the pre- and post-repair complexes. Therefore, our study encompasses the process of recognition, complex formation, and separation of the AGT and the damaged (methylated) DNA base. We believe that the use of parameters for the amino acid and nucleotide modifications and for the protein-DNA covalent bond will allow investigations of the DNA repair mechanism as well as the exploration of cancer therapeutics targeting the AGT-DNA complexes at various functional states as well as explorations via stabilization of the complex.

scholarly journals Patterns in Protein Flexibility: A Comparison of NMR “Ensembles”, MD Trajectories, and Crystallographic B-Factors

Molecules ◽  
2021 ◽  
Vol 26 (5) ◽  
pp. 1484
Author(s):  
Christopher Reinknecht ◽  
Anthony Riga ◽  
Jasmin Rivera ◽  
David A. Snyder
Keyword(s):  
Protein Flexibility ◽  
Molecular Machines ◽  
Md Simulations ◽  
Peptide Bond ◽  
Structure Calculation ◽  
Atomic Scale ◽  
Heavy Atoms ◽  
Structural Ensembles ◽  
Atomic Coordinates ◽  
Motional Behavior

Proteins are molecular machines requiring flexibility to function. Crystallographic B-factors and Molecular Dynamics (MD) simulations both provide insights into protein flexibility on an atomic scale. Nuclear Magnetic Resonance (NMR) lacks a universally accepted analog of the B-factor. However, a lack of convergence in atomic coordinates in an NMR-based structure calculation also suggests atomic mobility. This paper describes a pattern in the coordinate uncertainties of backbone heavy atoms in NMR-derived structural “ensembles” first noted in the development of FindCore2 (previously called Expanded FindCore: DA Snyder, J Grullon, YJ Huang, R Tejero, GT Montelione, Proteins: Structure, Function, and Bioinformatics 82 (S2), 219–230) and demonstrates that this pattern exists in coordinate variances across MD trajectories but not in crystallographic B-factors. This either suggests that MD trajectories and NMR “ensembles” capture motional behavior of peptide bond units not captured by B-factors or indicates a deficiency common to force fields used in both NMR and MD calculations.

scholarly journals Deciphering the Role of Residues Involved in Disorder-To-Order Transition Regions in Archaeal tRNA Methyltransferase 5

Genes ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 399
Author(s):  
Ambuj Srivastava ◽  
Dhanusha Yesudhas ◽  
Shandar Ahmad ◽  
M. Michael Gromiha
Keyword(s):  
Three Dimensional ◽  
Md Simulations ◽  
Order Transition ◽  
Free Form ◽  
Wild Type ◽  
Intrinsically Disordered ◽  
Intrinsically Disordered Regions ◽  
Type Complex ◽  
In The Wild ◽  
Trna Methyltransferase

tRNA methyltransferase 5 (Trm5) enzyme is an S-adenosyl methionine (AdoMet)-dependent methyltransferase which methylates the G37 nucleotide at the N1 atom of the tRNA. The free form of Trm5 enzyme has three intrinsically disordered regions, which are highly flexible and lack stable three-dimensional structures. These regions gain ordered structures upon the complex formation with tRNA, also called disorder-to-order transition (DOT) regions. In this study, we performed molecular dynamics (MD) simulations of archaeal Trm5 in free and complex forms and observed that the DOT residues are highly flexible in free proteins and become stable in complex structures. The energetic contributions show that DOT residues are important for stabilising the complex. The DOT1 and DOT2 are mainly observed to be important for stabilising the complex, while DOT3 is present near the active site to coordinate the interactions between methyl-donating ligands and G37 nucleotides. In addition, mutational studies on the Trm5 complex showed that the wild type is more stable than the G37A tRNA mutant complex. The loss of productive interactions upon G37A mutation drives the AdoMet ligand away from the 37th nucleotide, and Arg145 in DOT3 plays a crucial role in stabilising the ligand, as well as the G37 nucleotide, in the wild-type complex. Further, the overall energetic contribution calculated using MMPBSA corroborates that the wild-type complex has a better affinity between Trm5 and tRNA. Overall, our study reveals that targeting DOT regions for binding could improve the inhibition of Trm5.

scholarly journals Agent-Based Modeling Demonstrates How Local Chemotactic Behavior Can Shape Biofilm Architecture

mSphere ◽  
2019 ◽  
Vol 4 (3) ◽  
Author(s):  
Emily G. Sweeney ◽  
Andrew Nishida ◽  
Alexandra Weston ◽  
Maria S. Bañuelos ◽  
Kristin Potter ◽  
...  
Keyword(s):  
Helicobacter Pylori ◽  
Three Dimensional ◽  
Structural Features ◽  
Agent Based Modeling ◽  
Emergent Properties ◽  
Cellular Interactions ◽  
Biofilm Growth ◽  
Content Type ◽  
Agent Based ◽  
H Pylori

ABSTRACTBacteria are often found living in aggregated multicellular communities known as biofilms. Biofilms are three-dimensional structures that confer distinct physical and biological properties to the collective of cells living within them. We used agent-based modeling to explore whether local cellular interactions were sufficient to give rise to global structural features of biofilms. Specifically, we asked whether chemorepulsion from a self-produced quorum-sensing molecule, autoinducer-2 (AI-2), was sufficient to recapitulate biofilm growth and cellular organization observed for biofilms ofHelicobacter pylori, a common bacterial resident of human stomachs. To carry out this modeling, we modified an existing platform, Individual-based Dynamics of Microbial Communities Simulator (iDynoMiCS), to incorporate three-dimensional chemotaxis, planktonic cells that could join or leave the biofilm structure, and cellular production of AI-2. We simulated biofilm growth of previously characterizedH. pyloristrains with various AI-2 production and sensing capacities. Using biologically plausible parameters, we were able to recapitulate both the variation in biofilm mass and cellular distributions observed with these strains. Specifically, the strains that were competent to chemotax away from AI-2 produced smaller and more heterogeneously spaced biofilms, whereas the AI-2 chemotaxis-defective strains produced larger and more homogeneously spaced biofilms. The model also provided new insights into the cellular demographics contributing to the biofilm patterning of each strain. Our analysis supports the idea that cellular interactions at small spatial and temporal scales are sufficient to give rise to larger-scale emergent properties of biofilms.IMPORTANCEMost bacteria exist in aggregated, three-dimensional structures called biofilms. Although biofilms play important ecological roles in natural and engineered settings, they can also pose societal problems, for example, when they grow in plumbing systems or on medical implants. Understanding the processes that promote the growth and disassembly of biofilms could lead to better strategies to manage these structures. We had previously shown thatHelicobacter pyloribacteria are repulsed by high concentrations of a self-produced molecule, AI-2, and thatH. pylorimutants deficient in AI-2 sensing form larger and more homogeneously spaced biofilms. Here, we used computer simulations of biofilm formation to show that localH. pyloribehavior of repulsion from high AI-2 could explain the overall architecture ofH. pyloribiofilms. Our findings demonstrate that it is possible to change global biofilm organization by manipulating local cell behaviors, which suggests that simple strategies targeting cells at local scales could be useful for controlling biofilms in industrial and medical settings.

Sign in / Sign up

Export Citation Format

Share Document