scholarly journals Efficient Design Method for Plasmonic Filter for Tuning Spectral Selectivity

Crystals ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 531
Author(s):  
Yun Seon Do
Keyword(s):  
Photonic Band Gap ◽  
Design Method ◽  
Color Filter ◽  
Efficient Design ◽  
Large Area ◽  
Nano Structure ◽  
Plasmonic Filter ◽  
Resonance Modes ◽  
Spectral Selectivity ◽  
Color Filters

Nano-structure-based color technologies have been reported as alternatives for conventional pigment- or dye-based color filters due to their simple design methods and durable characteristics. Since structure-based optical resonances accompany multiple resonance modes, spectral selectivity could be degraded. In this work, a simple and effective design of a plasmonic color filter that combines the plasmonic filter with one-dimensional photonic crystals. The introduced photonic crystal provides a photonic band gap, and it helps in suppressing the undesirable transmission peaks of the plasmonic color filter that originates from higher order resonance modes. Finally, the proposed design achieves high color purity. In addition, the simplicity of the design makes it both suitable for large-area fabrication and cost effective. This work is expected to provide a practical alternative to traditional color filters.

scholarly journals Color Filters: Plasmonic Color Filter and its Fabrication for Large-Area Applications (Advanced Optical Materials 2/2013)

2013 ◽  
Vol 1 (2) ◽  
pp. 109-109 ◽  
Author(s):  
Yun Seon Do ◽  
Jung Ho Park ◽  
Bo Yeon Hwang ◽  
Sung-Min Lee ◽  
Byeong-Kwon Ju ◽  
...  
Keyword(s):  
Optical Materials ◽  
Color Filter ◽  
Large Area ◽  
Color Filters

An efficient design method for multi-material bolted joints used in the railway industry

2011 ◽  
Vol 94 (1) ◽  
pp. 246-252 ◽  
Author(s):  
G. Catalanotti ◽  
P.P. Camanho ◽  
P. Ghys ◽  
A.T. Marques
Keyword(s):  
Design Method ◽  
Bolted Joints ◽  
Efficient Design ◽  
Railway Industry

Highly sensitive refractive index sensor for detection of Hg2+ based on Fano-like resonance in metal-dielectric-metal meta-structure

2021 ◽  
Author(s):  
Shuangxiu Yuan ◽  
Xuebo Sun ◽  
Jing Li ◽  
Yan Li ◽  
Fufang Su ◽  
...  
Keyword(s):  
Refractive Index ◽  
Limit Of Detection ◽  
Wavelength Shift ◽  
Refractive Index Sensor ◽  
Large Area ◽  
Amount Of Substance ◽  
Resonance Modes ◽  
Dipole Resonance ◽  
Highly Sensitive ◽  
Fabry Perot

Abstract We experimentally and theoretically investigate Fano-like resonance in large-area Au/SiO2/Au nano-patches meta-structure, which is originating from the coupling between Fabry Perot resonance and magnetic dipole resonance modes. A highly sensitive refractive index sensor based on the lineshape analysis is obtained. The extracted wavelength shift with the amount of substance of Hg2+ changing from 10-3 pmol to 1 nmol has a linear dependence, and the sensitivity can reach to ultra-low limit of detection (LOD) as 10-3 pmol. This study may provide an approach for the development and modification in sensing.

scholarly journals Efficient Design for Integrated Photonic Waveguides with Agile Dispersion

Sensors ◽  
2021 ◽  
Vol 21 (19) ◽  
pp. 6651
Author(s):  
Zhaonian Wang ◽  
Jiangbing Du ◽  
Weihong Shen ◽  
Jiacheng Liu ◽  
Zuyuan He
Keyword(s):  
Integrated Circuit ◽  
Frequency Comb ◽  
Design Method ◽  
Chromatic Dispersion ◽  
Nonlinear Effects ◽  
Superior Performance ◽  
Efficient Design ◽  
Linear Dispersion ◽  
Dispersion Engineering ◽  
Low Dispersion

Chromatic dispersion engineering of photonic waveguide is of great importance for Photonic Integrated Circuit in broad applications, including on-chip CD compensation, supercontinuum generation, Kerr-comb generation, micro resonator and mode-locked laser. Linear propagation behavior and nonlinear effects of the light wave can be manipulated by engineering CD, in order to manipulate the temporal shape and frequency spectrum. Therefore, agile shapes of dispersion profiles, including typically wideband flat dispersion, are highly desired among various applications. In this study, we demonstrate a novel method for agile dispersion engineering of integrated photonic waveguide. Based on a horizontal double-slot structure, we obtained agile dispersion shapes, including broadband low dispersion, constant dispersion and slope-maintained linear dispersion. The proposed inverse design method is objectively-motivated and automation-supported. Dispersion in the range of 0–1.5 ps/(nm·km) for 861-nm bandwidth has been achieved, which shows superior performance for broadband low dispersion. Numerical simulation of the Kerr frequency comb was carried out utilizing the obtained dispersion shapes and a comb spectrum for 1068-nm bandwidth with a 20-dB power variation was generated. Significant potential for integrated photonic design automation can be expected.

scholarly journals Hyperchromatic structural color for perceptually enhanced sensing by the naked eye

2020 ◽  
Vol 117 (48) ◽  
pp. 30107-30117
Author(s):  
Tahmid H. Talukdar ◽  
Bria McCoy ◽  
Sarah K. Timmins ◽  
Taufiquar Khan ◽  
Judson D. Ryckman
Keyword(s):  
High Performance ◽  
Limit Of Detection ◽  
Form Factors ◽  
Optical Filters ◽  
Color Filter ◽  
Structural Color ◽  
Label Free ◽  
Colorimetric Sensing ◽  
Large Area ◽  
Naked Eye

Colorimetric sensors offer the prospect for on-demand sensing diagnostics in simple and low-cost form factors, enabling rapid spatiotemporal inspection by digital cameras or the naked eye. However, realizing strong dynamic color variations in response to small changes in sample properties has remained a considerable challenge, which is often pursued through the use of highly responsive materials under broadband illumination. In this work, we demonstrate a general colorimetric sensing technique that overcomes the performance limitations of existing chromatic and luminance-based sensing techniques. Our approach combines structural color optical filters as sensing elements alongside a multichromatic laser illuminant. We experimentally demonstrate our approach in the context of label-free biosensing and achieve ultrasensitive and perceptually enhanced chromatic color changes in response to refractive index changes and small molecule surface attachment. Using structurally enabled chromaticity variations, the human eye is able to resolve ∼0.1-nm spectral shifts with low-quality factor (e.g., Q ∼ 15) structural filters. This enables spatially resolved biosensing in large area (approximately centimeters squared) lithography-free sensing films with a naked eye limit of detection of ∼3 pg/mm2, lower than industry standard sensors based on surface plasmon resonance that require spectral or angular interrogation. This work highlights the key roles played by both the choice of illuminant and design of structural color filter, and it offers a promising pathway for colorimetric devices to meet the strong demand for high-performance, rapid, and portable (or point-of-care) diagnostic sensors in applications spanning from biomedicine to environmental/structural monitoring.

scholarly journals A New Design Method for Ultrawideband Microstrip-to-Suspended Stripline Transitions

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
Young-Gon Kim ◽  
Kang Wook Kim
Keyword(s):  
Conformal Mapping ◽  
Insertion Loss ◽  
Design Method ◽  
Impedance Matching ◽  
Characteristic Impedance ◽  
Ultra Wideband ◽  
Efficient Design ◽  
Em Simulation ◽  
Simulation Results ◽  
Analytical Expressions

A clear and efficient design method for ultra-wideband microstrip-to-suspended stripline transition, which is based on the analytical expressions of the whole transitional structure, is presented. The conformal mapping is applied to obtain the characteristic impedance of the transitional structure within 2.85% accuracy as compared with the EM-simulation results. The transition is designed to provide broadband impedance matching and smooth field conversion. The implemented transition performs less than 0.6 dB insertion loss per transition for frequencies up to 30 GHz.

Hydrodynamic Design of Pump Diffuser Using Inverse Design Method and CFD

2002 ◽  
Vol 124 (2) ◽  
pp. 319-328 ◽  
Author(s):  
Akira Goto ◽  
Mehrdad Zangeneh
Keyword(s):  
Design Method ◽  
Flow Behavior ◽  
Three Dimensional ◽  
Inverse Design ◽  
Navier Stokes ◽  
Outer Diameter ◽  
Large Area ◽  
Suction Surface ◽  
Pump Stage ◽  
Inverse Design Method

A new approach to optimizing a pump diffuser is presented, based on a three-dimensional inverse design method and a Computational Fluid Dynamics (CFD) technique. The blade shape of the diffuser was designed for a specified distribution of circulation and a given meridional geometry at a low specific speed of 0.109 (non-dimensional) or 280 (m3/min, m, rpm). To optimize the three-dimensional pressure fields and the secondary flow behavior inside the flow passage, the diffuser blade was more fore-loaded at the hub side as compared with the casing side. Numerical calculations, using a stage version of Dawes three-dimensional Navier-Stokes code, showed that such a loading distribution can suppress flow separation at the corner region between the hub and the blade suction surface, which was commonly observed with conventional designs having a compact bowl size (small outer diameter). The improvements in stage efficiency were confirmed experimentally over the corresponding conventional pump stage. The application of multi-color oil-film flow visualization confirmed that the large area of the corner separation was completely eliminated in the inverse design diffuser.

Optimization of Wind Turbine Blades Using Lifting Surface Method and Genetic Algorithm

2011 ◽  
Author(s):  
Xin Shen ◽  
Xiao-cheng Zhu ◽  
Zhao-hui Du
Keyword(s):  
Genetic Algorithm ◽  
Design Method ◽  
Turbine Blades ◽  
Optimization Method ◽  
Efficient Design ◽  
Wind Turbine Blades ◽  
Surface Method ◽  
Lifting Surface ◽  
Horizontal Axis Wind Turbines ◽  
Wake Model

This paper describes an optimization method for the design of horizontal axis wind turbines using the lifting surface method as the performance prediction model and a genetic algorithm for optimization. The aerodynamic code for the design method is based on the lifting surface method with a prescribed wake model for the description of the wake. A micro genetic algorithm handles the decision variables of the optimization problem such as the chord and twist distribution of the blade. The scope of the optimization method is to achieve the best trade off of the following objectives: maximum of annual energy production and minimum of blade loads including thrust and blade rood flap-wise moment. To illustrate how the optimization of the blade is carried out the procedure is applied to NREL Phase VI rotor. The result shows the optimization model can provide a more efficient design.

Sign in / Sign up

Export Citation Format

Share Document