scholarly journals Skull Melting Growth and Characterization of (ZrO2)0.89(Sc2O3)0.1(CeO2)0.01 Crystals

Crystals ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 49
Author(s):  
Dmitrii Agarkov ◽  
Mikhail Borik ◽  
Galina Eliseeva ◽  
Alexey Kulebyakin ◽  
Elena Lomonova ◽  
...  
Keyword(s):  
Rhombohedral Phase ◽  
Synthesis Methods ◽  
Melt Crystallization ◽  
Photoelectron Emission ◽  
Crystal Length ◽  
Raman Scattering Spectroscopy ◽  
X Ray ◽  
Transmission Electron ◽  
Chemical And Phase Compositions

(ZrO2)0.89(Sc2O3)0.1(CeO2)0.01 crystals have been grown by directional melt crystallization in a cold crucible. The chemical and phase compositions of the crystals have been characterized using energy dispersion X-ray spectroscopy (EDX), Raman scattering spectroscopy and transmission electron microscopy (TEM). The X-ray photoelectron emission method has been used for determining the valence state of the Ce ions. We show that directional melt crystallization produces an inhomogeneous ceria distribution along the crystal length. The as-grown crystals are mixtures of cubic and rhombohedral zirconia modifications. The rhombohedral phase has an inhomogeneous distribution along crystal length. Melt crystallization does not produce single-phase cubic (ZrO2)0.89(Sc2O3)0.1(CeO2)0.01 crystals. The formation of the phase structure in the crystals for different synthesis methods has been discussed.

Characterization of ultrathin Ge epilayers on (100) Si

1991 ◽  
Vol 69 (3-4) ◽  
pp. 246-254 ◽  
Author(s):  
J. -M. Baribeau ◽  
D. J. Lockwood ◽  
T. E. Jackman ◽  
P. Aebi ◽  
T. Tyliszczak ◽  
...  
Keyword(s):  
Strain Relaxation ◽  
Three Dimensional ◽  
Raman Scattering Spectroscopy ◽  
X Ray ◽  
Transmission Electron ◽  
Short Period ◽  
Short Period Superlattices ◽  
Direct Band ◽  
X Ray Absorption

The understanding of the epitaxy of pure Ge layers on Si is an important step towards the synthesis of SimGen (m, n < 10 monolayers) short-period superlattices. The possibility of a direct band-gap character makes these structures extremely attractive. We have grown thin buried Gen ([Formula: see text] monolayers) films on (100) Si by molecular beam epitaxy and studied their structural properties by a variety of techniques including Raman scattering spectroscopy, glancing incidence X-ray reflection, Rutherford backscattering, transmission electron microscopy, and extended X-ray absorption fine structure analysis. All these techniques allowed detection of the thin Ge layers and provided information about the thickness, morphology, strain distribution, and interface sharpness of these heterostructures. The Ge„ films with [Formula: see text] had a two-dimensional nature and showed no sign of strain relaxation. Intermixing at the Si–Ge interfaces was present in all these films and estimated to be not more than two monolayers. This smearing at the interfaces may have contributed to the maintenance of that pseudomorphicity. A thicker Ge layer (n = 12) showed evidence of strain relaxation and clustering in three-dimensional islands.

The Use of Advanced Analytical Techniques for Characterization of the Chemical, Physical, and Crystallographic Nature of a Surface

1973 ◽  
Vol 31 ◽  
pp. 132-133 ◽  
Author(s):  
R. E. Herfert
Keyword(s):  
Surface Characterization ◽  
Analytical Techniques ◽  
X Ray Diffraction ◽  
Depth Of Penetration ◽  
X Ray ◽  
The Past ◽  
Transmission Electron ◽  
Scanning Electron

Studies of the nature of a surface, either metallic or nonmetallic, in the past, have been limited to the instrumentation available for these measurements. In the past, optical microscopy, replica transmission electron microscopy, electron or X-ray diffraction and optical or X-ray spectroscopy have provided the means of surface characterization. Actually, some of these techniques are not purely surface; the depth of penetration may be a few thousands of an inch. Within the last five years, instrumentation has been made available which now makes it practical for use to study the outer few 100A of layers and characterize it completely from a chemical, physical, and crystallographic standpoint. The scanning electron microscope (SEM) provides a means of viewing the surface of a material in situ to magnifications as high as 250,000X.

scholarly journals Synthesis and characterization of Fe, Co, and Ni colloids in 2-mercaptoethanol

2020 ◽  
Vol 10 ◽  
pp. 184798042096688
Author(s):  
Galo Cárdenas-Triviño ◽  
Sergio Triviño-Matus
Keyword(s):  
Electron Microscopy ◽  
Electron Diffraction ◽  
Colloidal Dispersions ◽  
Synthesis And Characterization ◽  
X Ray ◽  
Transmission Electron ◽  
Vis Spectroscopy ◽  
Chemical Liquid Deposition ◽  
Liquid Deposition

Metal colloids in 2-mercaptoethanol using nanoparticles (NPs) of iron (Fe), cobalt (Co), and nickel (Ni) were prepared by chemical liquid deposition method. Transmission electron microscopy, electron diffraction, UV-VIS spectroscopy, and scanning electron microscopy with electron dispersive X-ray spectroscopy characterized the resulting colloidal dispersions. The NPs exhibited sizes with ranges from 9.8 nm for Fe, 3.7 nm for Co, and 7.2 nm for Ni. The electron diffraction shows the presence of the metals in its elemental state Fe (0), Co (0), and Ni (0) and also some compounds FeO (OH), CoCo2S4, and NiNi2S4.

Characterization of ordered mesoporous films on silicon (001) surface using X-ray and electron diffraction

2005 ◽  
Vol 38 (1) ◽  
pp. 211-216 ◽  
Author(s):  
Pang-Hung Liu ◽  
Kuei-Jung Chao ◽  
Xing-Jian Guo ◽  
Kuo-Ying Huang ◽  
Yen-Ru Lee ◽  
...  
Keyword(s):  
Electron Diffraction ◽  
Sol Gel ◽  
Dip Coating ◽  
Silica Film ◽  
Continuous Film ◽  
X Ray ◽  
Transmission Electron ◽  
Ordered Mesoporous ◽  
Direction Dependence

A continuous silica film with well aligned mesochannels parallel to the Si(001) surface was found to be formed through sol–gel dip-coating of a silica precursor with nonionic ethylene oxide surfactant. Two two-dimensional mesoporous structures in centered and non-centered rectangular symmetries and with the short axes of elongated ellipsoidal pores normal to the surface were observed by X-ray and electron diffraction. Detailed transmission electron microscopy investigations were employed to view the direction dependence of the channel or pore packing in the continuous film.

Detonation Synthesis of Nano-Size Materials

1995 ◽  
Vol 418 ◽  
Author(s):  
J. Forbes ◽  
J. Davis ◽  
C. Wong
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Nucleation And Growth ◽  
Detonation Synthesis ◽  
X Ray Diffraction ◽  
Crystalline Materials ◽  
X Ray ◽  
Transmission Electron ◽  
Nano Size

AbstractThe detonation of explosives typically creates 100's of kbar pressures and 1000's K temperatures. These pressures and temperatures last for only a fraction of a microsecond as the products expand. Nucleation and growth of crystalline materials can occur under these conditions. Recovery of these materials is difficult but can occur in some circumstances. This paper describes the detonation synthesis facility, recovery of nano-size diamond, and plans to synthesize other nano-size materials by modifying the chemical composition of explosive compounds. The characterization of nano-size diamonds by transmission electron microscopy and electron diffraction, X-ray diffraction and Raman spectroscopy will also be reported.

Characterization of columns grown during KrF laser micromachining of Al2O3–TiC ceramics

2003 ◽  
Vol 18 (5) ◽  
pp. 1123-1130 ◽  
Author(s):  
V. Oliveira ◽  
R. Vilar
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Laser Pulses ◽  
Formation Mechanisms ◽  
X Ray ◽  
Reducing Conditions ◽  
Transmission Electron ◽  
Column Formation ◽  
Krf Laser

This paper aims to contribute to the understanding of column formation mechanisms in Al2O3–TiC ceramics micromachined using excimer lasers. Chemical and structural characterization of columns grown in Al2O3–TiC composite processed with 200 KrF laser pulses at 10 J/cm2 was carried out by scanning electron microscopy, transmission electron microscopy, x-ray photoelectron spectroscopy, and x-ray diffraction analysis. Fully developed columns consist of a core of unprocessed material surrounded by an outer layer of Al2TiO5, formed in oxidizing conditions, and an inner layer, formed in reducing conditions, composed of TiC and Al3Ti or an AlTi solid solution. Possible mechanisms of column formation are discussed.

One Step Synthesis and Characterization of Zirconia-Graphene Composites

2012 ◽  
Vol 600 ◽  
pp. 174-177 ◽  
Author(s):  
Jian Fei Xia ◽  
Zong Hua Wang ◽  
Yan Zhi Xia ◽  
Fei Fei Zhang ◽  
Fu Qiang Zhu ◽  
...  
Keyword(s):  
Synthesis And Characterization ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
X Ray ◽  
Graphene Composite ◽  
Transmission Electron ◽  
One Step ◽  
Ft Ir ◽  
Xrd Techniques

Zirconia-graphene composite (ZrO2-G) has been successfully synthesized via decomposition of ZrOCl2•6H2O in a water-isopropanol system with dispersed graphene oxide (GO) utilizing Na2S as a precursor could enable the occurrence of the deposition of Zr4+ and the deoxygenation of GO at the same time. Transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) techniques were used to characterize the samples. It was found that graphene were fully coated with ZrO2, and the ZrO2 existing in tetragonal phase, which resulted in the formation of two-dimensional composite.

Hydrothermal Synthesis and Characterization of BiFeO3 Polyhedral Crystallites

2012 ◽  
Vol 174-177 ◽  
pp. 508-511
Author(s):  
Lin Lin Yang ◽  
Yong Gang Wang ◽  
Yu Jiang Wang ◽  
Xiao Feng Wang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

BiFeO3 polyhedrons had been successfully synthesized via a hydrothermal method. The as-prepared products were characterized by power X-ray diffraction (XRD) pattern, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The possible mechanisms for the formation of BiFeO3 polyhedrons were discussed. Though comparison experiments, it was found that the kind of precursor played a key role on the morphology control of BiFeO3 crystals.

scholarly journals Characterization of ferrite nanoparticles for preparation of biocomposites

2017 ◽  
Vol 8 ◽  
pp. 1257-1265 ◽  
Author(s):  
Urszula Klekotka ◽  
Magdalena Rogowska ◽  
Dariusz Satuła ◽  
Beata Kalska-Szostko
Keyword(s):  
Chemical Method ◽  
Ferrite Nanoparticles ◽  
Chemical Activity ◽  
Nominal Composition ◽  
X Ray Diffraction ◽  
Wet Chemical Method ◽  
X Ray ◽  
Transmission Electron ◽  
Wet Chemical

Ferrite nanoparticles with nominal composition Me0.5Fe2.5O4 (Me = Co, Fe, Ni or Mn) have been successfully prepared by the wet chemical method. The obtained particles have a mean diameter of 11–16 ± 2 nm and were modified to improve their magnetic properties and chemical activity. The surface of the pristine nanoparticles was functionalized afterwards with –COOH and –NH2 groups to obtain a bioactive layer. To achieve our goal, two different modification approaches were realized. In the first one, glutaraldehyde was attached to the nanoparticles as a linker. In the second one, direct bonding of such nanoparticles with a bioparticle was studied. In subsequent steps, the nanoparticles were immobilized with enzymes such as albumin, glucose oxidase, lipase and trypsin as a test bioparticles. The characterization of the nanoparticles was acheived by transmission electron microscopy, X-ray diffraction, energy dispersive X-ray and Mössbauer spectroscopy. The effect of the obtained biocomposites was monitored by Fourier transform infrared spectroscopy. The obtained results show that in some cases the use of glutaraldehyde was crucial (albumin).

Characterization of Al65.0Cu32.9Co2.1 Alloy Containing Nanofibres

2012 ◽  
Vol 186 ◽  
pp. 212-215
Author(s):  
Jacek Krawczyk ◽  
Włodzimierz Bogdanowicz ◽  
Grzegorz Dercz ◽  
Wojciech Gurdziel
Keyword(s):  
Electron Microscopy ◽  
Average Diameter ◽  
Chemical Compositions ◽  
X Ray ◽  
Transmission Electron ◽  
Orthogonal Set ◽  
T Phase ◽  
Terminal Area ◽  
Scanning Electron

Microstructure of terminal area of Al65Cu32.9Co2.1ingots (numbers indicate at.%), obtained via directional solidification was studied. Scanning Electron Microscopy, Transmission Electron Microscopy and X-ray powder diffraction were applied. Point microanalysis by Scanning Electron Microscope was used for examination of chemical compositions of alloy phases. It was found that tetragonal θ phase of Al2Cu stoichiometric formula was the dominate phase (matrix). Additionally the alloy contained orthogonal set of nanofibres of Al7Cu2Co T phase with the average diameter of 50-500 nm and oval areas of hexagonal Al3(Cu,Co)2H-phase, surrounded by monoclinic AlCu η1phase rim. Inside some areas of H-phase cores of decagonal quasicrystalline D phase were observed.

Sign in / Sign up

Export Citation Format

Share Document