scholarly journals Mathematical Modeling of Water-Soluble Astaxanthin Release from Binary Polysaccharide/Gelatin Blend Matrices

2021 ◽  
Vol 5 (3) ◽  
pp. 41
Author(s):  
Katarzyna Łupina ◽  
Dariusz Kowalczyk ◽  
Tomasz Skrzypek ◽  
Barbara Baraniak
Keyword(s):  
Time Lag ◽  
Gum Arabic ◽  
Water Soluble ◽  
Fickian Diffusion ◽  
Series Data ◽  
Blend Films ◽  
Release Times ◽  
Lag Model ◽  
C 32 ◽  
Free Films

Water-soluble AstaSana astaxanthin (AST) was loaded into 75/25 blend films made of polysaccharides (carboxymethyl cellulose (CMC), gum Arabic (GAR), starch sodium octenyl succinate (OSA), water-soluble soy polysaccharides (WSSP)) and gelatin (GEL) at levels of 0.25, 0.5, and 1%, respectively. Due to the presence of starch granules in the AST formulation, the supplemented films exhibited increased surface roughness as compared to the AST-free films. Apart from the CMC/GEL carrier, the migration of AST to water (25 °C, 32 h) was incomplete. Excluding the CMC-based carrier, the gradual rise in the AST concentration decreased the release rate. The Hopfenberg with time lag model provided the best fit for all release series data. Based on the quarter-release times (t25%), the 0.25% AST-supplemented OSA/GEL film (t25% = 13.34 h) ensured a 1.9, 2.2, and 148.2 slower release compared to the GAR-, WSSP- and CMC-based carriers, respectively. According to the Korsmeyer–Peppas model, the CMC-based films offered a quasi-Fickian release of AST (n < 0.5) with the burst effect (t100% = 0.5–1 h). In general, the release of AST from the other films was multi-mechanistic (n > 0.5), i.e., controlled at least by Fickian diffusion and the polymer relaxation (erosion) mechanism. The 1% AST-added WSSP/GEL system provided the most linear release profile.

scholarly journals Gum Arabic/Gelatin and Water-Soluble Soy Polysaccharides/Gelatin Blend Films as Carriers of Astaxanthin—A Comparative Study of the Kinetics of Release and Antioxidant Properties

Polymers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1062
Author(s):  
Katarzyna Łupina ◽  
Dariusz Kowalczyk ◽  
Waldemar Kazimierczak
Keyword(s):  
Release Rate ◽  
Antioxidant Properties ◽  
Gum Arabic ◽  
Blocking Agent ◽  
Water Soluble ◽  
Polymer Blending ◽  
Blend Films ◽  
Time Required ◽  
Kinetics Of ◽  
Active Substances

Polymer blending and incorporation of active substances offer a possibility of generation of novel packaging materials with interesting features. Astaxanthin is one of the most powerful antioxidants. Hence, in this study, water-soluble AstaSana astaxanthin (AST) was incorporated into 75/25 gum arabic/gelatin (GAR75/GEL25) and water-soluble soy polysaccharides/gelatin (WSSP75/GEL25) blend films in different concentrations (0, 0.25%, 0.5%, 1%). Microscope images showed good compatibility between the polysaccharides and GEL. Basing on time required for 50% release, the WSSP-based film exhibited an approximately four-fold slower release rate (t50% = 65.16–142.80 min) than the GAR-based film (t50% = 14.64–34.02 min). This result was mainly ascribed to the slower dissolution of the WSSP-based carrier. The faster release rate of the GAR-based films resulted in stronger antioxidant activity (quarter-scavenging time (t25%ABTS) = 0.22–7.51 min) in comparison to the WSSP-based films (t25%ABTS = 0.91–12.94 min). The increase in the AST concentration was accompanied by gradually reduced solubility and the release rate. It is possible that the increasing number of starch granules (from the AST formulation) acted as a dissolution blocking agent. In general, the WSSP75/GEL25 film displayed the most linear (the Zero-order similar) release profile. So, this carrier has potential for release of AST at a quasi-constant speed.

A distributed vaporization time-lag model for gas turbine combustor dynamics

1992 ◽  
Author(s):  
JAYESH MEHTA ◽  
P. MUNGUR ◽  
W. DODDS ◽  
L. DODGE
Keyword(s):  
Gas Turbine ◽  
Time Lag ◽  
Gas Turbine Combustor ◽  
Lag Model

Molecular, rheological and physicochemical characterisation of puka gum, an arabinogalactan-protein extracted from the Meryta sinclairii tree

2020 ◽  
Author(s):  
MSM Wee ◽  
Ian Sims ◽  
KKT Goh ◽  
L Matia-Merino
Keyword(s):  
Hydrodynamic Radius ◽  
Average Molecular Weight ◽  
Gum Arabic ◽  
Water Soluble ◽  
Arabinogalactan Protein ◽  
Type Ii ◽  
Weight Average Molecular Weight ◽  
Soluble Polysaccharide ◽  
Physicochemical Characterisation ◽  
Increasing Temperature

© 2019 Elsevier Ltd A water-soluble polysaccharide (type II arabinogalactan-protein) extracted from the gum exudate of the native New Zealand puka tree (Meryta sinclairii), was characterised for its molecular, rheological and physicochemical properties. In 0.1 M NaCl, the weight average molecular weight (Mw) of puka gum is 5.9 × 106 Da with an RMS radius of 56 nm and z-average hydrodynamic radius of 79 nm. The intrinsic viscosity of the polysaccharide is 57 ml/g with a coil overlap concentration 15% w/w. Together, the shape factor, p, of 0.70 (exponent of RMS radius vs. hydrodynamic radius), Smidsrød-Haug's stiffness parameter B of 0.031 and Mark-Houwink exponent α of 0.375 indicate that the polysaccharide adopts a spherical conformation in solution, similar to gum arabic. The pKa is 1.8. The polysaccharide exhibits a Newtonian to shear-thinning behaviour from 0.2 to 25% w/w. Viscosity of the polysaccharide (1 s−1) decreases with decreasing concentration, increasing temperature, ionic strength, and at acidic pH.

scholarly journals Colorless and Transparent Polyimide Microporous Film with Excellent Physicochemical Property

Polymers ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1298
Author(s):  
Jong Won Kim ◽  
Seon Ju Lee ◽  
Moon Young Choi ◽  
Jin-Hae Chang
Keyword(s):  
Pore Size ◽  
Porous Membrane ◽  
Amic Acid ◽  
Water Soluble ◽  
Poly Vinyl Alcohol ◽  
Thermal Stabilities ◽  
Blend Films ◽  
Hydrogen Bonding Interactions ◽  
Heat Treated ◽  
Microporous Film

4,4′-(4,4′-isopropylidenediphenoxy)bis(phthalic anhydride) (BPADA) as a dianhydride and bis(3-aminophenyl) sulfone (APS) and bis(3-amino-4-hydroxyphenyl) sulfone (APS-OH) as diamines were used to synthesize two types of poly(amic acid) (PAA). Varying amounts (0–5.0 wt%) of water-soluble poly(vinyl alcohol) (PVA) were mixed with PAA, and the resulting blend was heat-treated at different stages to obtain the colorless and transparent polyimide (CPI) blend films. The synthesized blended film completely removed water-soluble PVA in water. The possibility as a porous membrane according to the pore size varied according to the amount of PVA was investigated. The dispersibility and compatibility of CPI containing APS-OH monomer were higher than those of the APS monomer. This could be attributed to the hydrogen-bonding interactions between the CPI main chains and PVA. Scanning electron microscopy was conducted to characterize the material. The results revealed that the pore size of the CPI blend film increased as the PVA concentration increased. It was confirmed that uniform pores of μm-size were observed in CPI. The thermal stabilities, morphologies, optical properties, and solubilities of two CPIs obtained using APS and APS-OH monomers were investigated and their properties were compared with each other.

scholarly journals Sol–Gel Processing of Water-Soluble Carbon Nitride Enables High-Performance Photoanodes

2020 ◽  
Author(s):  
Christiane Adler ◽  
Igor Krivtsov ◽  
Dariusz Mitoraj ◽  
Lucía dos Santos-Gómez ◽  
Santiago García-Granda ◽  
...  
Keyword(s):  
Soft Matter ◽  
High Performance ◽  
Carbon Nitride ◽  
Sol Gel ◽  
Thin Layers ◽  
Water Soluble ◽  
New Paradigm ◽  
High Quality ◽  
Free Films ◽  
Gel Processing

In spite of the enormous promise that polymeric carbon nitride (PCN) materials hold for photoelectrochemical (PEC) applications, the fabrication of high-quality PCN photoelectrodes has been a largely elusive goal to date. Here we tackle this challenge by devising, for the first time, a sol–gel approach that enables facile preparation of photoanodes based on poly(heptazine imide) (PHI), a polymer belonging to the PCN family. The sol–gel process capitalizes on the use of a water-soluble PHI precursor composed of nanosized (~10 nm) particles that allows formation of a non-covalent hydrogel. The hydrogel can be deposited on a conductive substrate resulting in formation of mechanically stable porous polymeric thin layers (~400 nm), in contrast to the commonly obtained loosely attached thick particulate coatings. The resulting photoanodes exhibit unprecedented PEC performance in methanol reforming in neutral pH electrolytes with photocurrents of up to 177±27 mA cm<sup>-2</sup> (1 sun illumination) and 320±40 mA cm<sup>-2</sup> (2 sun illumination) at 1.23 V vs. RHE, maintaining such high photocurrents even down to ~0 V vs. RHE. These parameters permit effective operation even without any external electric bias, as demonstrated by bias-free photoreforming of methanol and glycerol, and highly selective (~100%) photooxidation of 4-methoxybenzyl alcohol (4-MBA). The robust binder-free films derived from sol–gel processing of water-soluble PCN thus represent a new paradigm for high-performance ‘soft-matter’ photoelectrocatalytic systems, and pave the way for further applications in which high-quality PCN films are required.

scholarly journals Novel Gliclazide Electrosprayed Nano-Solid Dispersions: Physicochemical Characterization and Dissolution Evaluation

2019 ◽  
Vol 9 (2) ◽  
pp. 231-240
Author(s):  
Khosro Adibkia ◽  
Solmaz Ghajar ◽  
Karim Osouli-Bostanabad ◽  
Niloufar Balaei ◽  
Shahram Emami ◽  
...  
Keyword(s):  
Drug Release ◽  
Solid Dispersions ◽  
In Vitro Release ◽  
Physicochemical Characterization ◽  
Amorphous State ◽  
Water Soluble ◽  
Fickian Diffusion ◽  
Release Mechanism ◽  
Peg 6000

Purpose: In the current study, electrospraying was directed as a novel alternative approach to improve the physicochemical attributes of gliclazide (GLC), as a poorly water-soluble drug, by creating nanocrystalline/amorphous solid dispersions (ESSs). Methods: ESSs were formulated using Eudragit® RS100 and polyethylene glycol (PEG) 6000 as polymeric carriers at various drug: polymer ratios (i.e. 1:5 and 1:10) with different total solution concentrations of 10, 15, and 20% w/v. Morphological, physicochemical, and in-vitro release characteristics of the developed formulations were assessed. Furthermore, GLC dissolution behaviors from ESSs were fitted to various models in order to realize the drug release mechanism. Results: Field emission scanning electron microscopy analyses revealed that the size and morphology of the ESSs were affected by the drug: polymer ratios and solution concentrations. The polymer ratio augmentation led to increase in the particle size while the solution concentration enhancement yielded in a fiber establishment. Differential scanning calorimetry and powder X-ray diffraction investigations demonstrated that the ESSs were present in an amorphous state. Furthermore, the in vitro drug release studies depicted that the samples prepared employing PEG 6000 as carrier enhanced the dissolution rate and the model that appropriately fitted the release behavior of ESSs was Weibull model, where demonstrating a Fickian diffusion as the leading release mechanism. Fourier-transform infrared spectroscopy results showed a probability of complexation or hydrogen bonding, development between GLC and the polymers in the solid state. Conclusion: Hence the electrospraying system avails the both nanosizing and amorphization advantages, therefore, it can be efficiently applied to formulating of ESSs of BCS Class II drugs.

scholarly journals Data-Driven Recommendations for Establishing Threshold Values for the NIS Trend Indicator in the Mediterranean Sea

Diversity ◽  
2022 ◽  
Vol 14 (1) ◽  
pp. 57
Author(s):  
Marika Galanidi ◽  
Argyro Zenetos
Keyword(s):  
Time Series Data ◽  
Driving Forces ◽  
Eastern Mediterranean ◽  
Time Lag ◽  
Series Data ◽  
Indigenous Species ◽  
Reference Period ◽  
Threshold Values ◽  
Basin Scale ◽  
The Mediterranean

In the present work, we analysed time series data on the introduction of new non-indigenous species (NIS) in the Mediterranean between 1970 and 2017, aiming to arrive at recommendations concerning the reference period and provisional threshold values for the NIS trend indicator. We employed regression analysis and breakpoint structural analysis. Our results confirm earlier findings that the reference conditions differ for the four Mediterranean subregions, and support a shortening of the reporting cycle from six to three years, with a two-year time lag for the ensuing assessment. Excluding Lessepsian fishes and parasites, the reference period, defined as the most recent time segment with stable mean new NIS values, was estimated as 1997–2017 for the eastern Mediterranean, 2012–2017 for the central Mediterranean, 2000–2017 for the Adriatic and 1970–2017 for the western Mediterranean. These findings are interpreted primarily on the basis of a basin scale temperature regime shift in the late 1990s, shifts in driving forces such as shellfish culture, and as a result of intensified research efforts and citizen scientist initiatives targeting NIS in the last decade. The threshold values, i.e., the three-year average new NIS values during the reference period, are indicative and will ultimately depend on the choice of species and pathways to be used in the calculations. This is discussed through the prism of target setting in alignment with specific management objectives.

scholarly journals Climate-sensitive radial increment model of Norway spruce in Tyrol based on a distributed lag model with penalized splines for year-ring time series

2018 ◽  
Vol 48 (8) ◽  
pp. 930-941 ◽  
Author(s):  
Arne Nothdurft ◽  
Sonja Vospernik
Keyword(s):  
Time Series ◽  
Norway Spruce ◽  
High Temperatures ◽  
Time Lag ◽  
Ring Width ◽  
Penalized Regression ◽  
Penalized Splines ◽  
Radial Increment ◽  
Model Framework ◽  
Lag Model

A novel methodological framework is presented for climate-sensitive modeling of annual radial stem increment using year-ring width time series. The approach is based on a generalized additive model with penalized regression splines together with a distributed time lag model taking into account smooth nonlinear effects of a series of monthly temperature and precipitation values, as well as their interactions. Climate effects are also assumed to vary smoothly with time lag. The model framework enables both the detrending of the individual time series and the regression modeling to be performed simultaneously in a single model step. The approach is applied to year-ring width time series of Norway spruce (Picea abies (L.) H. Karst.) trees in Tyrol, Austria. The marginal response curves show that tree growth is mainly promoted by high temperatures in late spring and early summer and by precipitation in fall and winter. Summer drought does not have a negative influence on the current year’s radial increment; however, when it is associated with high temperatures, it lowers the increment in the subsequent growth period. Higher winter precipitation in conjunction with lower temperatures has a positive effect. A significant non-climate related long-term growth trend is demonstrated, probably reflecting NOx and SO2 emission trends in Austria.

A Lag Effect of IT Investment on Firm Performance

2011 ◽  
pp. 246-273
Author(s):  
Sangho Lee ◽  
Soung Hie Kim
Keyword(s):  
Firm Performance ◽  
Time Lag ◽  
It Investment ◽  
Performance Factors ◽  
Distributed Lag ◽  
Distributed Lag Model ◽  
Lag Effect ◽  
Lag Model ◽  
Information Intensity ◽  
High Information

This chapter discusses the positive effects of IT investment on firm financial performance when a distinct range of characteristics is examined. The relationship between IT investment and firm performance considering the information intensity of the industry is explored using a distributed lag model. Findings indicate both a positive effect and a positive lag effect of IT investment. The effects of IT investment in the high information-intensive industry are significantly larger than in the low information-intensive industry. Furthermore, a lagged effect of IT investment is larger than an immediate effect, regardless of the information intensity of the industry. We conclude that firms in the high information-intensive industry need to be more cognizant of performance factors when investing in IT investment than in the low information-intensive industry. Moreover, it is necessary to consider the time lag between IT investment and firm performance.

Sign in / Sign up

Export Citation Format

Share Document