scholarly journals Cooperativity between Dimerization and Binding Equilibria in the Ternary System Laponite-Indocyanine Green-Water

2021 ◽  
Vol 5 (1) ◽  
pp. 6
Author(s):  
Giuseppe Cinelli ◽  
Gennaro Bufalo ◽  
Francesco Lopez ◽  
Luigi Ambrosone
Keyword(s):  
Ternary System ◽  
Indocyanine Green ◽  
Low Cost ◽  
Pure Water ◽  
Green Water ◽  
Hydrodynamic Diameter ◽  
Saturation Curve ◽  
Chemical Functionalization ◽  
Vital Dyes ◽  
Fixed Concentration

Laponite is an artificial nanoclay available in large quantities and at low cost. This marterial represents an efficient and suitable way of delivering hydrophobic vital dyes without the need for chemical functionalization. Laponite is available in large quantities and at low cost, then it would be an efficient way of delivering hydrophobic vital dyes without the need for chemical functionalization. The hydrodynamic diameter of laponite extrapolated to infinite dilution indicates that this clay is completely exfoliated. Furthermore, the hydrodynamic diameter in the laponite-Indocyanine green-water ternary system, at a fixed laponite concentration (2% (m/m)) exhibits a saturation curve. It was found that the extrapolated diameter at dye zero concentration is smaller than in pure water. Absorption spectra with fixed concentration of dye exhibit a red shift of 10–13 nm. On the contrary, the spectra acquired at a constant concentration of laponite do not undergo any displacement. The deconvolution of the spectra with two Gaussian peaks allows to calculate the concentration of the monomeric and dimeric species. The results were interpreted as a synergy between the dye dimerization balance and the dye-laponite binding.

Green water-based binders for LiFePO4/C cathode in Li-ion batteries: a comparative study

2021 ◽  
Author(s):  
Xiaojing Zhang ◽  
xinyi Ge ◽  
Zhigang Shen ◽  
Han Ma ◽  
Jingshi Wang ◽  
...  
Keyword(s):  
Comparative Study ◽  
Polyvinylidene Fluoride ◽  
Low Cost ◽  
Green Water ◽  
Li Ion Batteries ◽  
Environmental Friendliness ◽  
Water Based ◽  
Li Ion

Compared with environmentally harmful binder polyvinylidene fluoride (PVDF) in Li-ion batteries (LIBs), water-based binders have many advantages, such as low cost, rich sources and environmental friendliness. In this study, various...

THE FEASIBILITY OF KAOLIN AS MAIN MATERIAL FOR LOW COST POROUS CERAMIC HOLLOW FIBRE MEMBRANE PREPARED USING COMBINED PHASE INVERSION AND SINTERING TECHNIQUE

2017 ◽  
Vol 79 (1-2) ◽  
Author(s):  
Siti Khadijah Hubadillah ◽  
Mohd Hafiz Dzarfan Othman ◽  
A. F. Ismail ◽  
Mukhlis A. Rahman ◽  
Juhana Jaafar
Keyword(s):  
Phase Inversion ◽  
Low Cost ◽  
Pure Water ◽  
Porous Ceramic ◽  
Water Flux ◽  
Hollow Fibre ◽  
Hollow Fibre Membrane ◽  
Fibre Membrane ◽  
Pure Water Flux ◽  
And Performance

Ceramic hollow fibre membrane (CHFM) demonstrated superior characteristics and performance in any separation application. The only problem associated with this kind of technology is the high cost. In order to effectively fabricate and produce low cost porous CHFM, a series of CHFMs made of kaolin were fabricated via combined phase inversion and sintering technique. The CHFMs from kaolin named as kaolin hollow fibre membranes (KHFMs) were studied at different kaolin contents of 35 wt.%, 37.5 wt.% and 40 wt.% sintered at 1200ºC. The result indicated that by varying kaolin contents, different morphologies were obtained due to changes in the viscosity of ceramic suspension containing kaolin. The optimum kaolin content for KHFM was identified. It was found that KHFM prepared at 37.5 wt% has a mechanical strength and pure water flux of A and B respectively.  

scholarly journals Enhanced Performance of Fly Ash-Based Supports for Low-Cost Ceramic Membranes with the Addition of Bauxite

Membranes ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 711
Author(s):  
Wan Fan ◽  
Dong Zou ◽  
Jingrui Xu ◽  
Xianfu Chen ◽  
Minghui Qiu ◽  
...  
Keyword(s):  
Fly Ash ◽  
High Performance ◽  
Bending Strength ◽  
Ceramic Membrane ◽  
Sintering Temperature ◽  
Low Cost ◽  
Pure Water ◽  
Ceramic Membranes ◽  
Mullite Phase ◽  
Optimum Balance

Support is a necessary foundation for ceramic membranes to achieve high performance. Finding the optimum balance between high performance and low cost is still a significant challenge in the fabrication of ceramic supports. In this study, low-cost fly ash-based ceramic supports with enhanced performance were prepared by the addition of bauxite. The pore structure, mechanical strength, and shrinkage of fly ash/bauxite supports could be tuned by optimizing the bauxite content and sintering temperature. When the sintering temperature and bauxite content were controlled at 1300 °C and 40 wt%, respectively, the obtained membrane supports exhibited a high pure water permeance of approximately 5.36 m3·m−2·h−1·bar−1 and a high bending strength of approximately 69.6 MPa. At the same time, the optimized ceramic supports presented a typical mullite phase and excellent resistance to acid and alkali. This work provides a potential route for the preparation of ceramic membrane supports with characteristics of low cost and high performance.

scholarly journals A DIY Fabrication Approach for Ultra-Thin Focus-Tunable Liquid Lens Using Electrohydrodynamic Pump

Micromachines ◽  
2021 ◽  
Vol 12 (12) ◽  
pp. 1452
Author(s):  
Taichi Murakami ◽  
Yu Kuwajima ◽  
Ardi Wiranata ◽  
Ayato Minaminosono ◽  
Hiroki Shigemune ◽  
...  
Keyword(s):  
Low Cost ◽  
Rapid Development ◽  
Pure Water ◽  
Dielectric Fluid ◽  
Copper Sheet ◽  
Fluidic Channel ◽  
Liquid Lens ◽  
Do It Yourself ◽  
Tunable Lenses ◽  
Smart Mobile

Demand for variable focus lens is increasing these days due to the rapid development of smart mobile devices and drones. However, conventional mechanical systems for lenses are generally complex, cumbersome, and rigid (e.g., for motors and gears). This research proposes a simple and compact liquid lens controlled by an electro hydro dynamics (EHD) pump. In our study, we propose a do-it-yourself (DIY) method to fabricate the low-cost EHD lens. The EHD lens consists of a polypropylene (PP) sheet for the exterior, a copper sheet for the electrodes, and an acrylic elastomer for the fluidic channel where dielectric fluid and pure water are filled. We controlled the lens magnification by changing the curvature of the liquid interface between the dielectric fluid and pure water. We evaluated the magnification performance of the lens. Moreover, we also established a numerical model to characterize the lens performance. We expect to contribute to the miniaturization of focus-tunable lenses.

scholarly journals Cyclopentadienone Iron Tricarbonyl Complexes-Catalyzed Hydrogen Transfer in Water

Molecules ◽  
2020 ◽  
Vol 25 (2) ◽  
pp. 421 ◽  
Author(s):  
Daouda Ndiaye ◽  
Sébastien Coufourier ◽  
Mbaye Diagne Mbaye ◽  
Sylvain Gaillard ◽  
Jean-Luc Renaud
Keyword(s):  
Metal Complexes ◽  
Hydrogen Transfer ◽  
Low Cost ◽  
Pure Water ◽  
Free Water ◽  
Water Soluble ◽  
Tricarbonyl Complex ◽  
Reaction Conditions ◽  
Catalytic Systems ◽  
Iron Tricarbonyl

The development of efficient and low-cost catalytic systems is important for the replacement of robust noble metal complexes. The synthesis and application of a stable, phosphine-free, water-soluble cyclopentadienone iron tricarbonyl complex in the reduction of polarized double bonds in pure water is reported. In the presence of cationic bifunctional iron complexes, a variety of alcohols and amines were prepared in good yields under mild reaction conditions.

The Retrospects and Prospects of Pure Water Hydraulic Technology

2012 ◽  
Vol 201-202 ◽  
pp. 979-982 ◽  
Author(s):  
Feng Xu ◽  
Li Xiang Zhang
Keyword(s):  
Hydraulic System ◽  
Low Cost ◽  
Pure Water ◽  
Chemical Properties ◽  
Simple System ◽  
Hydraulic Oil ◽  
Physico Chemical ◽  
Water Hydraulic ◽  
Research Situation ◽  
The Ideal

Pure water hydraulic technology attracts more and more attention of people due to no pollution, low cost, simple system, and many other advantages. This paper compares physico-chemical properties between pure water and hydraulic oil, concludes that pure water is the ideal medium for hydraulic system. Then it discusses the development of pure water hydraulic technology, introduces the present research situation and development of pure water hydraulic components from home to abroad in the future.

scholarly journals Facile bottom-up synthesis of partially oxidized black phosphorus nanosheets as metal-free photocatalyst for hydrogen evolution

2018 ◽  
Vol 115 (17) ◽  
pp. 4345-4350 ◽  
Author(s):  
Bin Tian ◽  
Bining Tian ◽  
Bethany Smith ◽  
M. C. Scott ◽  
Qin Lei ◽  
...  
Keyword(s):  
Large Scale ◽  
Field Effect Transistors ◽  
Low Cost ◽  
Pure Water ◽  
Black Phosphorus ◽  
Raw Material ◽  
Bottom Up ◽  
Metal Free ◽  
Wet Chemical Synthesis ◽  
Intense Activity

Few-layer black phosphorus (BP) nanosheets were first reported as a 2D material for the application of field-effect transistors in 2014 and have stimulated intense activity among physicists, chemists, and material and biomedical scientists, driving research into novel synthetic techniques to produce BP nanosheets. At present, exfoliation is the main route toward few-layer BP nanosheets via employing bulk BP as raw material. However, this is a complicated and time-consuming process, which is difficult for the large-scale synthesis of BP nanosheets. Moreover, BP degrades rapidly when exfoliated to nanoscale dimensions, resulting in the rapid loss of semiconducting properties. Here, we report the direct wet-chemical synthesis of few-layer BP nanosheets in gram-scale quantities in a bottom-up approach based on common laboratory reagents at low temperature, showing excellent stability due to partial oxidation of surface. Solvent and temperature are two critical factors, controlling not only the formation of BP nanosheets but also the thickness. The as-prepared BP nanosheets can extract hydrogen from pure water (pH = 6.8), exhibiting more than 24-fold higher activity than the well-known C3N4 nanosheets. Our results reporting the ability to prepare few-layer BP nanosheets with a facile, scalable, low-cost approach take us a step closer to real-world applications of phosphorene including next-generation metal-free photocatalysts for photosynthesis.

scholarly journals Properties of Foamed Lightweight High-Performance Phosphogypsum-Based Ternary System Binder

2020 ◽  
Vol 10 (18) ◽  
pp. 6222 ◽  
Author(s):  
Girts Bumanis ◽  
Jelizaveta Zorica ◽  
Diana Bajare
Keyword(s):  
Ternary System ◽  
High Performance ◽  
Raw Materials ◽  
Low Cost ◽  
Construction Materials ◽  
Mineralogical Composition ◽  
Point Of View ◽  
Raw Material ◽  
Total Energy Consumption ◽  
And Performance

The potential of phosphogypsum (PG) as secondary raw material in construction industry is high if compared to other raw materials from the point of view of availability, total energy consumption, and CO2 emissions created during material processing. This work investigates a green hydraulic ternary system binder based on waste phosphogypsum (PG) for the development of sustainable high-performance construction materials. Moreover, a simple, reproducible, and low-cost manufacture is followed by reaching PG utilization up to 50 wt.% of the binder. Commercial gypsum plaster was used for comparison. High-performance binder was obtained and on a basis of it foamed lightweight material was developed. Low water-binder ratio mixture compositions were prepared. Binder paste, mortar, and foamed binder were used for sample preparation. Chemical, mineralogical composition and performance of the binder were evaluated. Results indicate that the used waste may be successfully employed to produce high-performance binder pastes and even mortars with a compression strength up to 90 MPa. With the use of foaming agent, lightweight (370–700 kg/m3) foam concrete was produced with a thermal conductivity from 0.086 to 0.153 W/mK. Water tightness (softening coefficient) of such foamed material was 0.5–0.64. Proposed approach represents a viable solution to reduce the environmental footprint associated with waste disposal.

scholarly journals Niobium Tungsten Oxide in a Green Water-in-Salt Electrolyte Enables Ultra-Stable Aqueous Lithium-Ion Capacitors

2020 ◽  
Vol 12 (1) ◽  
Author(s):  
Shengyang Dong ◽  
Yi Wang ◽  
Chenglong Chen ◽  
Laifa Shen ◽  
Xiaogang Zhang
Keyword(s):  
Tungsten Oxide ◽  
Electrode Materials ◽  
Low Cost ◽  
Negative Electrode ◽  
Lithium Ion ◽  
High Energy ◽  
High Energy Density ◽  
Green Water ◽  
Lithium Acetate ◽  
Hybrid Supercapacitors

AbstractAqueous hybrid supercapacitors are attracting increasing attention due to their potential low cost, high safety and eco-friendliness. However, the narrow operating potential window of aqueous electrolyte and the lack of suitable negative electrode materials seriously hinder its future applications. Here, we explore high concentrated lithium acetate with high ionic conductivity of 65.5 mS cm−1 as a green “water-in-salt” electrolyte, providing wide voltage window up to 2.8 V. It facilitates the reversible function of niobium tungsten oxide, Nb18W16O93, that otherwise only operations in organic electrolytes previously. The Nb18W16O93 with lithium-ion intercalation pseudocapacitive behavior exhibits excellent rate performance, high areal capacity, and ultra-long cycling stability. An aqueous lithium-ion hybrid capacitor is developed by using Nb18W16O93 as negative electrode combined with graphene as positive electrode in lithium acetate-based “water-in-salt” electrolyte, delivering a high energy density of 41.9 W kg−1, high power density of 20,000 W kg−1 and unexceptionable stability of 50,000 cycles.

Sign in / Sign up

Export Citation Format

Share Document