scholarly journals Epoxidation of Karanja (Millettia pinnata) Oil Methyl Esters in the Presence of Hydrogen Peroxide over a Simple Niobium-Containing Catalyst

Catalysts ◽  
2019 ◽  
Vol 9 (4) ◽  
pp. 344 ◽  
Author(s):  
Nicola Scotti ◽  
Nicoletta Ravasio ◽  
Claudio Evangelisti ◽  
Rinaldo Psaro ◽  
Michele Penso ◽  
...  

The synthesis, characterization and catalytic performance of a conceptually simple, novel NbOx-SiO2 catalyst are here described. The niobium(V)-silica catalyst was prepared starting from cheap and viable reactants, by alkaline deposition of NH4Nb(C2O4)2·H2O in the presence of fructose as a stabilizer and subsequent calcination. The NbOx-SiO2 solid (0.95 Nb wt.%) was tested in the liquid-phase epoxidation with aqueous hydrogen peroxide of methyl oleate, as a model substrate. It was then tested in the epoxidation of a mixture of methyl esters (FAMEs) obtained by transesterification with methanol and purification of karanja oil, extracted from the autochthonous Indian variety of Millettia pinnata tree. The catalyst showed a promising performance in terms of methyl oleate conversion (up to 75%) and selectivity to epoxide (up to 82%). It was then tested on the FAME mixture from karanja oil, where interesting conversion values were attained (up to 70%), although with lower selectivities and yields to the mixture of desired epoxidized FAMEs. The solid withstood four catalytic cycles overall, during which a non-negligible surface reorganization of the Nb(V) sites was observed. However, this restructuring did not negatively affect the performance of the catalysts in terms of conversion or selectivity.

Catalysts ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 283
Author(s):  
Oxana Kholdeeva ◽  
Nataliya Maksimchuk

In recent years, metal–organic frameworks (MOFs) have received increasing attention as selective oxidation catalysts and supports for their construction. In this short review paper, we survey recent findings concerning use of MOFs in heterogeneous liquid-phase selective oxidation catalysis with the green oxidant–aqueous hydrogen peroxide. MOFs having outstanding thermal and chemical stability, such as Cr(III)-based MIL-101, Ti(IV)-based MIL-125, Zr(IV)-based UiO-66(67), Zn(II)-based ZIF-8, and some others, will be in the main focus of this work. The effects of the metal nature and MOF structure on catalytic activity and oxidation selectivity are analyzed and the mechanisms of hydrogen peroxide activation are discussed. In some cases, we also make an attempt to analyze relationships between liquid-phase adsorption properties of MOFs and peculiarities of their catalytic performance. Attempts of using MOFs as supports for construction of single-site catalysts through their modification with heterometals will be also addressed in relation to the use of such catalysts for activation of H2O2. Special attention is given to the critical issues of catalyst stability and reusability. The scope and limitations of MOF catalysts in H2O2-based selective oxidation are discussed.


2008 ◽  
Vol 128 (1-2) ◽  
pp. 177-182 ◽  
Author(s):  
Didik Prasetyoko ◽  
Hamzah Fansuri ◽  
Zainab Ramli ◽  
Salasiah Endud ◽  
Hadi Nur

2016 ◽  
Vol 6 (19) ◽  
pp. 7280-7288 ◽  
Author(s):  
Nicole Wilde ◽  
Jan Přech ◽  
Marika Pelz ◽  
Martin Kubů ◽  
Jiří Čejka ◽  
...  

TS-1-based catalysts with different textural features, namely layered TS-1, pillared TS-1, and Ti-pillared TS-1 as well as mesoporous TS-1, were investigated in the liquid-phase epoxidation of methyl oleate as a model compound for plant oil-derived substrates with hydrogen peroxide at 50 °C.


2005 ◽  
Vol 2005 (11) ◽  
pp. 716-718 ◽  
Author(s):  
Qiang Gao ◽  
Yong Ding ◽  
Haitao Liu ◽  
Jishuan Suo

The epoxidation of a variety of electron-deficient α,β-unsaturated carbonyl compounds has been studied using a series of heteropoly compounds and aqueous hydrogen peroxide in acetonitrile. Among the heteropoly compounds investigated, (CTP)3VMo12O40 showed the highest catalytic performance for the epoxidation of these compounds.


Author(s):  
Matias Alvear ◽  
Michele Emanuele Fortunato ◽  
Vincenzo Russo ◽  
Kari Eränen ◽  
Martino Di Serio ◽  
...  

Author(s):  
SUNNY SONI ◽  
MADHU AGARWAL

Biodiesel is a renewable liquid fuel made from natural, renewable biological sources such as edible and non edible oils. Over the last years, biodiesel has gained more market due to its benefits and because it appears as the natural substitute for diesel. Reasons for growing interest in biodiesel include its potential for reducing noxious emissions, potential contributions to rural economic development, as an additional demand center for agricultural commodities, and as a way to reduce reliance on foreign oil. Biodiesel was prepared from soybean oil by transesterification with methanol in the presence of cement clinker. Cement clinker was examined as a catalyst for a conversion of soybean oil to fatty acid methyl esters (FAMEs). It can be a promising heterogeneous catalyst for the production of biodiesel fuels from soybean oil because of high activity in the conversion and no leaching in the transesterification reaction. The reaction conditions were optimized. A study for optimizing the reaction parameters such as the reaction temperature, and reaction time, was carried out. The catalyst cement clinker composition was characterized by XRF. The results demonstrate that the cement clinker shows high catalytic performance & it was found that the yield of biodiesel can reach as high as 84.52% after 1 h reaction at 65°C, with a 6:1 molar ratio of methanol to oil, 21 wt% KOH/cement clinker as catalyst.


Sign in / Sign up

Export Citation Format

Share Document