scholarly journals Effect of Surface Modifications of SBA-15 with Aminosilanes and 12-Tungstophosphoric Acid on Catalytic Properties in Environmentally Friendly Esterification of Glycerol with Oleic Acid to Produce Monoolein

Catalysts ◽  
2018 ◽  
Vol 8 (9) ◽  
pp. 360 ◽  
Author(s):  
Kullatida Ratchadapiban ◽  
Piyasan Praserthdam ◽  
Duangamol Tungasmita ◽  
Chutima Tangku ◽  
Wipark Anutrasakda
Keyword(s):  
Oleic Acid ◽  
Electrostatic Interactions ◽  
Heterogeneous Catalysts ◽  
Textural Properties ◽  
Catalytic Performance ◽  
Hexagonal Structure ◽  
Tungstophosphoric Acid ◽  
Molar Ratio ◽  
Catalyst Loading ◽  
X Ray

A series of protonated amino-functionalized SBA-15 materials was synthesized and tested as heterogeneous catalysts for the esterification of glycerol with oleic acid to produce monoolein. Mesoporous SBA-15 (S) was functionalized with three different aminosilanes: 3-aminopropyltriethoxysilane (N1); [3-(2-amino-ethylamino)propyltrimethoxysilane] (N2); and (3-trimethoxysilylpropyl) diethylenetriamine (N3), before being impregnated with 40 wt % 12-tungstophosphoric acid (HPW). The resulting nanocatalysts (S-Nx-HPW) were characterized by X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), N2 adsorption-desorption, SEM equipped with energy dispersive X-ray spectroscopy (SEM-EDX), transmission electron microscopy (TEM), and elemental analysis techniques. The presence of components of the nanocatalysts and the preservation of the hexagonal structure of SBA-15 were confirmed. Using different functionalizing agents considerably affected the textural properties and acidity of the synthesized nanocatalysts, which helped to improve the catalytic performance. In particular, S-N2-HPW was more active and selective than other catalysts in this study, as well as than a number of other commercial acid catalysts, with 95.0% oleic acid conversion and 60.9% monoolein selectivity being obtained after five h of reaction at 160 °C using 2.5 wt % of catalyst loading and glycerol/oleic acid molar ratio of 4:1. Aminosilane functionalization also helped to increase the reusability of the catalysts to at least six cycles without considerable loss of activity through strong electrostatic interactions between HPW anions and the protonated amino-functionalized SBA-15 materials.

scholarly journals Calcium Oxide Derived from Waste Shells of Mussel, Cockle, and Scallop as the Heterogeneous Catalyst for Biodiesel Production

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Achanai Buasri ◽  
Nattawut Chaiyut ◽  
Vorrada Loryuenyong ◽  
Phatsakon Worawanitchaphong ◽  
Sarinthip Trongyong
Keyword(s):  
Calcium Oxide ◽  
Heterogeneous Catalysts ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Catalyst Loading ◽  
X Ray ◽  
Bet Method ◽  
Xrf Scanning ◽  
Waste Shell ◽  
Calcination Method

The waste shell was utilized as a bioresource of calcium oxide (CaO) in catalyzing a transesterification to produce biodiesel (methyl ester). The economic and environmen-friendly catalysts were prepared by a calcination method at 700–1,000°C for 4 h. The heterogeneous catalysts were characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF), scanning electron microscopy (SEM), and the Brunauer-Emmett-Teller (BET) method. The effects of reaction variables such as reaction time, reaction temperature, methanol/oil molar ratio, and catalyst loading on the yield of biodiesel were investigated. Reusability of waste shell catalyst was also examined. The results indicated that the CaO catalysts derived from waste shell showed good reusability and had high potential to be used as biodiesel production catalysts in transesterification of palm oil with methanol.

scholarly journals Oyster andPyramidellaShells as Heterogeneous Catalysts for the Microwave-Assisted Biodiesel Production fromJatropha curcasOil

2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Achanai Buasri ◽  
Tidarat Rattanapan ◽  
Chalida Boonrin ◽  
Chosita Wechayan ◽  
Vorrada Loryuenyong
Keyword(s):  
Jatropha Curcas ◽  
Heterogeneous Catalysts ◽  
Biodiesel Production ◽  
Bet Surface Area ◽  
Molar Ratio ◽  
Catalyst Loading ◽  
X Ray ◽  
Microwave Assisted ◽  
Xrf Scanning ◽  
Waste Shell

Microwave-assisted biodiesel production via transesterification ofJatropha curcasoil with methanol using solid oxide catalyst derived from waste shells of oyster andPyramidellawas studied. The shells were calcined at 900°C for 2 h and calcium oxide (CaO) catalyst characterizations were carried out by X-ray diffraction (XRD), X-ray fluorescence (XRF), scanning electron microscope (SEM), and the Brunauer-Emmett-Teller (BET) surface area measurements. The effects of reaction variables such as reaction time, microwave power, methanol/oil molar ratio, and catalyst loading on the yield of biodiesel were investigated. Reusability of waste shell catalyst was also examined. The results indicated that the economic and environmentally friendly catalysts derived from oyster andPyramidellashells showed good reusability and had high potential to be used as biodiesel production catalysts under microwave-assisted transesterification ofJatropha curcasoil with methanol.

scholarly journals Synthesis of Magnetic Base Catalyst from Industrial Waste for Transesterification of Palm Oil

2021 ◽  
Vol 17 (1) ◽  
pp. 53-64
Author(s):  
Shamala Gowri Krishnan ◽  
Fei-Ling Pua ◽  
Hong-Hua Lim
Keyword(s):  
Palm Oil ◽  
Industrial Waste ◽  
Catalytic Performance ◽  
Raw Material ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Catalyst Loading ◽  
Impregnation Method ◽  
X Ray ◽  
Carbon Dioxide Co2

Industrial waste is produced in large amounts annually; without proper planning, the waste might cause a serious threat to the environment. Hence, an industrial waste-based heterogeneous magnetic catalyst was synthesized using carbide lime waste (CLW) as raw material for biodiesel production via transesterification of palm oil. The catalyst was successfully synthesized by the one-step impregnation method and calcination at 600 °C. The synthesized catalyst, C-CLW/g-Fe2O3, was characterized by temperature-programmed desorption of carbon dioxide (CO2-TPD), scanning electron microscopy (SEM), electron dispersive X-ray spectroscopy (EDX), X-ray Diffraction (XRD), Brunauer-Emmett-Teller (BET), vibrating sample magnetometer (VSM), and Fourier transform infrared spectroscopy (FT-IR). The catalyst has a specific surface area of 18.54 m2/g and high basicity of 3,637.20 µmol/g. The catalytic performance shows that the optimum reaction conditions are 6 wt% catalyst loading, 12:1 methanol to oil molar ratio with the reaction time of 3 h at 60 °C to produce 90.5% biodiesel yield. The catalyst exhibits good catalytic activity and magnetism, indicating that the CLW can be a potential raw material for catalyst preparation and application in the biodiesel industry. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

Calcium Methoxide Synthesis from Quick Lime Using as Solid Catalyst in Refined Palm Oil Biodiesel Production

2013 ◽  
Vol 834-836 ◽  
pp. 550-554 ◽  
Author(s):  
Warakom Suwanthai ◽  
Vittaya Punsuvon ◽  
Pilanee Vaithanomsat
Keyword(s):  
Palm Oil ◽  
Acid Methyl Ester ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Catalyst Loading ◽  
Solid Catalyst ◽  
Solid Base ◽  
Quick Lime ◽  
X Ray ◽  
Refined Palm Oil

In this research, calcium methoxide was synthesized as solid base catalyst from quick lime for biodiesel production. The catalyst was further characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), attenuated total reflection fourier transform (ATR-FTIR) and Energy-dispersive X-ray spectroscopies (EDX) to evaluate its performance. The transesterification of refined palm oil using calcium methoxide and the process parameters affecting the fatty acid methyl ester (FAME) content such as catalyst concentration, methanol:oil molar ratio and reaction time were investigated. The results showed that the FAME content at 97% was achieved within 3 h using 3 %wt catalyst loading, 12:1 methanol:oil molar ratio and 65 °C reaction temperature. The result of FAME suggested calcium methoxide was the promising solid catalyst for substitution of the conventional liquid catalyst.

scholarly journals High Performance of Phenol Adsorption using Iron Based SBA-15 Synthesized by Loading-Microwave Method

2019 ◽  
Vol 35 (3) ◽  
pp. 1022-1028
Author(s):  
Yuvita Eka Pertiwi ◽  
Maria Ulfa
Keyword(s):  
Mesoporous Silica ◽  
Molecular Sieves ◽  
High Performance ◽  
Textural Properties ◽  
Hexagonal Structure ◽  
Kinetics Model ◽  
Element Analysis ◽  
Phenol Compounds ◽  
X Ray ◽  
Iron Based

The iron based mesoporous silica (Fe2O3/SBA-15) was studied for the first time for adsorption of phenol as a model adsorbate compound. The structural and textural properties of the synthesized samples were characterized by means of X-Ray Diffraction, Transmission Electron Microscopy, FTIR and element analysis techniques by Energy Dispersive X-Ray (EDX). The result of XRD analysis showed that mesoporous SBA-15 silica molecular sieves which modified with Fe2O3has a hexagonal structure with a pore size is 4.90 nm and iron contents (25.27%) were found on the surface of the Fe2O3/mesoporous silica SBA-15. While the FTIR analysis showed that Fe2O3/SBA-15 had functional group of assymetric Si-O-Si and Fe-O-Si which was found at 1085 cm-1 and 678 cm-1, respectively. Adsorption performance of Fe2O3/SBA-15 material investigated by phenol compounds as adsorbate model. The optimum contact time is 60 minutes and the Kinetics model of the mesoporous SBA-15 silica molecular sieves modified Fe2O3 can adsorb phenol compounds following the Kinetics Model Ho and McKay. The result optimum adsorption capacity occuring in the adsorption of phenol compounds by of the mesoporous SBA-15 silica molecular sieves modified Fe2O3 is 114.000 mg/g.

scholarly journals Preparation, characterization and catalytic performance of Pt supported on porous carbonaceous materials in the oxidation of toluene as a volatile organic compound

2019 ◽  
Vol 45 ◽  
pp. 146867831988793
Author(s):  
Niloofar Atashi ◽  
Mohammad Hasan Peyrovi ◽  
Nastaran Parsafard
Keyword(s):  
Carbon Nanotube ◽  
Organic Compound ◽  
Power Law ◽  
Volatile Organic Compound ◽  
Inductively Coupled Plasma ◽  
Textural Properties ◽  
Catalytic Performance ◽  
Impregnation Method ◽  
X Ray ◽  
Volatile Organic

Platinum-carbonaceous catalysts were prepared by the wet impregnation method and tested for catalytic oxidation of toluene as a volatile organic compound. The textural properties of the constructed catalysts were considered by X-ray diffraction, X-ray fluorescence, inductively coupled plasma – optical emission spectroscopy, Fourier transform infrared, scanning electron microscope and N2 adsorption–desorption analysis. The catalytic assessments showed that the best activity (>99%) and high stability and selectivity to CO2 (>99%) are related to platinum-supported carbon nanotube. The curves of the conversion and selectivity demonstrate that the performance of catalysts to eliminate the volatile organic compound and turn it into CO2 conforms to the following descending order: platinum-supported carbon nanotube >platinum-supported graphene >platinum-supported activated carbon >platinum-supported carbon nanofibre. The kinetic of toluene oxidation has been evaluated as a function of toluene and oxygen partial pressures in different temperatures. Two kinetic models (Power Law and Mars–van Krevelen mechanisms) were applied to the reaction and compared with the experimental data. Mars–van Krevelen model is more appropriate than the Power Law model for this reaction as Mars–van Krevelen model showed better prediction of the behaviour of the reaction.

scholarly journals A sustainable process for biodiesel production using Zn/Mg oxidic species as active, selective and reusable heterogeneous catalysts

2020 ◽  
Vol 7 (1) ◽  
Author(s):  
Marisa B. Navas ◽  
José F. Ruggera ◽  
Ileana D. Lick ◽  
Mónica L. Casella
Keyword(s):  
Castor Oil ◽  
Heterogeneous Catalysts ◽  
Catalytic Performance ◽  
High Specific Surface Area ◽  
Raw Material ◽  
Biodiesel Production ◽  
X Ray ◽  
Renewable Biomass ◽  
Butyl Esters ◽  
Mesoporous Solids

AbstractThis paper describes the preparation and characterization of MgO and ZnO-based catalysts, pure and mixed in different proportions, supported on γ-Al2O3. Their catalytic performance was studied in the transesterification of soybean oil and castor oil with methanol and butanol, attempting to produce biodiesel. XRD (X-ray diffraction), SEM–EDS (scanning electron microscopy–energy dispersive X-ray spectroscopy), CO2-adsorption and N2-adsorption allowed characterizing the prepared catalysts. The characterization results were in all cases consistent with mesoporous solids with high specific surface area. All the catalysts exhibited good results, especially in the transesterification of castor oil using butanol. For this reaction, the reuse was tested, maintaining high FABE (fatty acid butyl esters) yields after four cycles. This good performance can be attributed to the basic properties of the Mg species, and simultaneously, to the amphoteric properties of ZnO, which allow both triglycerides and free fatty acids to be converted into esters. Using these catalysts, it is possible to obtain second-generation biodiesel, employing castor oil, a raw material that does not compete with the food industry. In addition, butanol can be produced from renewable biomass.

Natural Hydroxyapatite (NHAp) Derived from Pork Bone as a Renewable Catalyst for Biodiesel Production via Microwave Irradiation

2015 ◽  
Vol 659 ◽  
pp. 216-220 ◽  
Author(s):  
Achanai Buasri ◽  
Thaweethong Inkaew ◽  
Laorrut Kodephun ◽  
Wipada Yenying ◽  
Vorrada Loryuenyong
Keyword(s):  
Reaction Time ◽  
Microwave Power ◽  
Raw Materials ◽  
Raw Material ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Catalyst Loading ◽  
X Ray ◽  
Animal Bone ◽  
Natural Hydroxyapatite

The use of waste materials for producing biodiesel via transesterification has been of recent interest. In this study, the pork bone was used as the raw materials for natural hydroxyapatite (NHAp) catalyst. The calcination of animal bone was conducted at 900 °C for 2 h. The raw material and the resulting heterogeneous catalyst were characterized using X-ray diffraction (XRD), X-ray fluorescence (XRF), scanning electron microscopy (SEM) and the Brunauer-Emmett-Teller (BET) method. The effects of reaction time, microwave power, methanol/oil molar ratio, catalyst loading and reusability of catalyst were systematically investigated. The optimum conditions, which yielded a conversion of oil of nearly 94%, were reaction time 5 min and microwave power 800 W. The results indicated that the NHAp catalysts derived from pork bone showed good reusability and had high potential to be used as biodiesel production catalysts under microwave-assisted transesterification of Jatropha Curcas oil with methanol.

SYNTHESIS OF GRAPHITE OXIDE (GO)/Cu2O NANOCOMPOSITE AND ITS CATALYTIC PERFORMANCE UNDER THE ULTRASOUND

NANO ◽  
2013 ◽  
Vol 08 (03) ◽  
pp. 1350032 ◽  
Author(s):  
CHUNNIAN CHEN ◽  
CHENWEI YU ◽  
WEN FU
Keyword(s):  
Fourier Transform ◽  
Electrostatic Interactions ◽  
Catalytic Performance ◽  
X Ray ◽  
Selective Area ◽  
Transmission Electron ◽  
Vis Spectroscopy ◽  
Ft Ir ◽  
Ir And Raman ◽  
Selective Area Electron Diffraction

GO/ Cu2O nanocomposite had been successfully synthesized by electrostatic interactions method. X-ray powder diffraction (XRD), transmission electron microscope (TEM), selective-area electron diffraction (SAED), Fourier transform infrared spectroscopy (FT-IR) and Raman spectra confirmed the structure of the Cu2O and GO/ Cu2O nanocomposite. The catalytic degradation of Rhodamine B under the condition of ultrasound was investigated and the result of UV-Vis spectroscopy demonstrated that the nanocomposite can efficiently degraded it.

scholarly journals Biodiesel Production over Niobium-Containing Catalysts: A Review

Energies ◽  
2021 ◽  
Vol 14 (17) ◽  
pp. 5506
Author(s):  
Daniel Carreira Batalha ◽  
Márcio José da Silva
Keyword(s):  
Catalytic Activity ◽  
Active Sites ◽  
Heterogeneous Catalysts ◽  
Raw Materials ◽  
Catalytic Performance ◽  
High Specific Surface Area ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Main Reaction ◽  
High Catalytic Activity

Nowadays, the synthesis of biofuels from renewable raw materials is very popular. Among the various challenges involved in improving these processes, environmentally benign catalysts compatible with an inexpensive feedstock have become more important. Herein, we report the recent advances achieved in the development of Niobium-containing heterogeneous catalysts as well as their use in routes to produce biodiesel. The efficiency of different Niobium catalysts in esterification and transesterification reactions of lipids and oleaginous raw materials was evaluated, considering the effect of main reaction parameters such as temperature, time, catalyst load, and oil:alcohol molar ratio on the biodiesel yield. The catalytic performance of Niobium compounds was discussed considering the characterization data obtained by different techniques, including NH3-TPD, BET, and Pyr-FT-IR analysis. The high catalytic activity is attributed to its inherent properties, such as the active sites distribution over a high specific surface area, strength of acidity, nature, amount of acidic sites, and inherent mesoporosity. On top of this, recycling experiments have proven that most Niobium catalysts are stable and can be repeatedly used with consistent catalytic activity.

Sign in / Sign up

Export Citation Format

Share Document