scholarly journals Catalysis on Nanostructured Indium Tin Oxide Surface for Fast and Inexpensive Probing of Antibodies during Pandemics

Catalysts ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 191
Author(s):  
Arash Fattahi ◽  
Pooya Afaghi ◽  
Khashayar Ghandi
Keyword(s):  
Solid State ◽  
Indium Tin Oxide ◽  
Low Cost ◽  
Diagnostic Tools ◽  
Oxide Surface ◽  
Semiconductor Surface ◽  
Global Threat ◽  
Catalytic Chemical Reaction ◽  
Induced Changes ◽  
Nanostructured Semiconductor

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has become a global threat to human health and the economy. Society needs inexpensive, fast, and accurate quantitative diagnostic tools. Here, we report a new approach using a solid-state biosensor to measure antibodies, which does not require functionalization, unlike conventional biosensors. A nanostructured semiconductor surface with catalytic properties was used as a transducer for rapid immobilization and measurement of the antibody. The transducer response was based on solid-state electronics properties. The changes on the surface of the semiconductor induced changes in the direct current (DC) surface resistivity. This was a result of a catalytic chemical reaction on that surface. This new low-cost approach reduced the response time of the measurement significantly, and it required only a very small amount of sample on the microliter scale.

Engineering Gas Sensors With Aerosol Nanocrystals

2007 ◽  
Author(s):  
Ganhua Lu ◽  
Liying Zhu ◽  
Stephen Hebert ◽  
Edward Jen ◽  
Leonidas Ocola ◽  
...  
Keyword(s):  
Dynamic Response ◽  
Gas Sensors ◽  
Tin Oxide ◽  
Low Cost ◽  
Hydrogen Gas ◽  
Oxide Surface ◽  
Semiconductor Surface ◽  
Oxide Nanoparticles ◽  
Electrostatic Assembly ◽  
Tin Oxide Nanoparticles

Rutile tin oxide (SnO2) is a wide band gap (3.6 eV at 300K [1]) n-type semiconductor material. It is widely used as sensing elements in gas sensors [2]. The sensing mechanism is generally attributed to the significant change in the electrical resistance of the material associated with the adsorption/desorption of oxygen on the semiconductor surface [3]. The formation of oxygen adsorbates (O2− or O−) results in an electron-depletion surface layer due to the electron transfer from the oxide surface to oxygen [4]. Recent studies [5, 6] have shown that use of tin oxide nanocrystals significantly improves the dynamic response and the sensitivity of sensors since the electron depletion may occur in the whole crystallite. Here we report on the fabrication and characterization of a miniaturized gas sensor based on tin oxide nanocrystals. A simple, convenient and low-cost mini-arc plasma source is used to synthesize high-quality tin oxide nanoparticles in aerosol phase at atmospheric pressure. The nanoparticle sensor is then fabricated by electrostatic assembly of product tin oxide nanoparticles onto e-beam lithographically patterned interdigitated electrodes. The microfabricated nanoparticle sensor exhibits good sensitivity and dynamic response to low-concentration ethanol vapor and hydrogen gas diluted in air.

scholarly journals Room-Temperature Solution-Processed 0D/1D Bilayer Electrodes for Translucent CsPbBr3 Perovskite Photovoltaics

Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1489
Author(s):  
Bhaskar Parida ◽  
Saemon Yoon ◽  
Dong-Won Kang
Keyword(s):  
Solar Cells ◽  
Indium Tin Oxide ◽  
High Performance ◽  
Room Temperature ◽  
Low Cost ◽  
Perovskite Solar Cells ◽  
Ambient Air ◽  
Plasma Damage ◽  
Temperature Solution ◽  
Ito Nanoparticles

Materials and processing of transparent electrodes (TEs) are key factors to creating high-performance translucent perovskite solar cells. To date, sputtered indium tin oxide (ITO) has been a general option for a rear TE of translucent solar cells. However, it requires a rather high cost due to vacuum process and also typically causes plasma damage to the underlying layer. Therefore, we introduced TE based on ITO nanoparticles (ITO-NPs) by solution processing in ambient air without any heat treatment. As it reveals insufficient conductivity, Ag nanowires (Ag-NWs) are additionally coated. The ITO-NPs/Ag-NW (0D/1D) bilayer TE exhibits a better figure of merit than sputtered ITO. After constructing CsPbBr3 perovskite solar cells, the device with 0D/1D TE offers similar average visible transmission with the cells with sputtered ITO. More interestingly, the power conversion efficiency of 0D/1D TE device was 5.64%, which outperforms the cell (4.14%) made with sputtered-ITO. These impressive findings could open up a new pathway for the development of low-cost, translucent solar cells with quick processing under ambient air at room temperature.

scholarly journals All-Solid-State Potentiometric Ion-Sensors Based on Tailored Imprinted Polymers for Pholcodine Determination

Polymers ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1192
Author(s):  
Hisham S. M. Abd-Rabboh ◽  
Abd El-Galil E. Amr ◽  
Abdulrahman A. Almehizia ◽  
Ayman H. Kamel
Keyword(s):  
Solid State ◽  
Low Cost ◽  
Cost Effective ◽  
Pharmaceutical Formulations ◽  
Measurement Sensitivity ◽  
Serum Samples ◽  
Multiwalled Carbon ◽  
Imprinted Polymers ◽  
High Measurement ◽  
Liquid Chromatographic

In recent times, the application of the use of ion-selective electrodes has expanded in the field of pharmaceutical analyses due to their distinction from other sensors in their high selectivity and low cost of measurement, in addition to their high measurement sensitivity. Cost-effective, reliable, and robust all-solid-state potentiometric selective electrodes were designed, characterized, and successfully used for pholcodine determination. The design of the sensor device was based on the use of a screen-printed electrode modified with multiwalled carbon nanotubes (MWCNTs) as a solid-contact transducer. Tailored pholcodine (PHO) molecularly imprinted polymers (MIPs) were prepared, characterized, and used as sensory receptors in the presented potentiometric sensing devices. The sensors exhibited a sensitivity of 31.6 ± 0.5 mV/decade (n = 5, R2 = 0.9980) over the linear range of 5.5 × 10−6 M with a detection limit of 2.5 × 10−7 M. Real serum samples in addition to pharmaceutical formulations containing PHO were analyzed, and the results were compared with those obtained by the conventional standard liquid chromatographic approach. The presented analytical device showed an outstanding efficiency for fast, direct, and low-cost assessment of pholcodine levels in different matrices.

Organic electrode materials for non-aqueous, aqueous, and all-solid-state Na-ion batteries

2021 ◽  
Author(s):  
Kathryn Holguin ◽  
Motahareh Mohammadiroudbari ◽  
Kaiqiang Qin ◽  
Chao Luo
Keyword(s):  
Solid State ◽  
High Performance ◽  
Electrode Materials ◽  
Low Cost ◽  
Li Ion Batteries ◽  
Organic Electrode ◽  
Li Ion

Na-ion batteries (NIBs) are promising alternatives to Li-ion batteries (LIBs) due to the low cost, abundance, and high sustainability of sodium resources. However, the high performance of inorganic electrode materials...

scholarly journals Can Agricultural Management Induced Changes in Soil Organic Carbon Be Detected Using Mid-Infrared Spectroscopy?

2021 ◽  
Vol 13 (12) ◽  
pp. 2265
Author(s):  
Jonathan Sanderman ◽  
Kathleen Savage ◽  
Shree Dangal ◽  
Gabriel Duran ◽  
Charlotte Rivard ◽  
...  
Keyword(s):  
Organic Carbon ◽  
Soil Organic Carbon ◽  
Soil Carbon ◽  
Diffuse Reflectance Spectroscopy ◽  
Low Cost ◽  
Soil Survey ◽  
Mid Infrared ◽  
Mir Spectroscopy ◽  
Induced Changes ◽  
Carbon Change

A major limitation to building credible soil carbon sequestration programs is the cost of measuring soil carbon change. Diffuse reflectance spectroscopy (DRS) is considered a viable low-cost alternative to traditional laboratory analysis of soil organic carbon (SOC). While numerous studies have shown that DRS can produce accurate and precise estimates of SOC across landscapes, whether DRS can detect subtle management induced changes in SOC at a given site has not been resolved. Here, we leverage archived soil samples from seven long-term research trials in the U.S. to test this question using mid infrared (MIR) spectroscopy coupled with the USDA-NRCS Kellogg Soil Survey Laboratory MIR spectral library. Overall, MIR-based estimates of SOC%, with samples scanned on a secondary instrument, were excellent with the root mean square error ranging from 0.10 to 0.33% across the seven sites. In all but two instances, the same statistically significant (p < 0.10) management effect was found using both the lab-based SOC% and MIR estimated SOC% data. Despite some additional uncertainty, primarily in the form of bias, these results suggest that large existing MIR spectral libraries can be operationalized in other laboratories for successful carbon monitoring.

scholarly journals Direct measurement of the thermoelectric properties of electrochemically deposited Bi2Te3 thin films

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Jose Recatala-Gomez ◽  
Pawan Kumar ◽  
Ady Suwardi ◽  
Anas Abutaha ◽  
Iris Nandhakumar ◽  
...  
Keyword(s):  
Thin Films ◽  
Thermoelectric Properties ◽  
Bismuth Telluride ◽  
Indium Tin Oxide ◽  
Seed Layer ◽  
Room Temperature ◽  
Low Cost ◽  
Temperature Dependent ◽  
Temperature Heat ◽  
Electrochemically Deposited

Abstract The best known thermoelectric material for near room temperature heat-to-electricity conversion is bismuth telluride. Amongst the possible fabrication techniques, electrodeposition has attracted attention due to its simplicity and low cost. However, the measurement of the thermoelectric properties of electrodeposited films is challenging because of the conducting seed layer underneath the film. Here, we develop a method to directly measure the thermoelectric properties of electrodeposited bismuth telluride thin films, grown on indium tin oxide. Using this technique, the temperature dependent thermoelectric properties (Seebeck coefficient and electrical conductivity) of electrodeposited thin films have been measured down to 100 K. A parallel resistor model is employed to discern the signal of the film from the signal of the seed layer and the data are carefully analysed and contextualized with literature. Our analysis demonstrates that the thermoelectric properties of electrodeposited films can be accurately evaluated without inflicting any damage to the films.

scholarly journals Imaging Diagnosis of Right Ventricle Involvement in Chagas Cardiomyopathy

2017 ◽  
Vol 2017 ◽  
pp. 1-14 ◽  
Author(s):  
Minna M. D. Romano ◽  
Henrique T. Moreira ◽  
André Schmidt ◽  
Benedito Carlos Maciel ◽  
José Antônio Marin-Neto
Keyword(s):  
Right Ventricle ◽  
Tissue Characterization ◽  
Low Cost ◽  
Diagnostic Techniques ◽  
Diagnostic Tools ◽  
Deformation Analysis ◽  
Geometrical Shape ◽  
Gold Standard Method ◽  
Chagas Cardiomyopathy ◽  
Health And Disease

Right ventricle (RV) is considered a neglected chamber in cardiology and knowledge about its role in cardiac function was mostly focused on ventricular interdependence. However, progress on the understanding of myocardium diseases primarily involving the RV led to a better comprehension of its role in health and disease. In Chagas disease (CD), there is direct evidence from both basic and clinical research of profound structural RV abnormalities. However, clinical detection of these abnormalities is hindered by technical limitations of imaging diagnostic tools. Echocardiography has been a widespread and low-cost option for the study of patients with CD but, when applied to the RV assessment, faces difficulties such as the absence of a geometrical shape to represent this cavity. More recently, the technique has evolved to a focused guided RV imaging and myocardial deformation analysis. Also, cardiac magnetic resonance (CMR) has been introduced as a gold standard method to evaluate RV cavity volumes. CMR advantages include precise quantitative analyses of both LV and RV volumes and its ability to perform myocardium tissue characterization to identify areas of scar and edema. Evolution of these cardiac diagnostic techniques opened a new path to explore the pathophysiology of RV dysfunction in CD.

Screening of low cost agricultural wastes to maximize the fructosyltransferase production and its applicability in generation of fructooligosaccharides by solid state fermentation

2017 ◽  
Vol 118 ◽  
pp. 19-26 ◽  
Author(s):  
Mohd Anis Ganaie ◽  
Hemant Soni ◽  
Gowhar Ahmad Naikoo ◽  
Layana Taynara Santos Oliveira ◽  
Hemant Kumar Rawat ◽  
...  
Keyword(s):  
Solid State ◽  
Solid State Fermentation ◽  
Low Cost ◽  
Agricultural Wastes

A Lithiated Organic Nanofiber-Reinforced Composite Polymer Electrolyte Enabling Li-ion Conduction Highways for Solid-State Lithium Metal Batteries

2021 ◽  
Author(s):  
Liying Tian ◽  
Ying Liu ◽  
Zhe Su ◽  
Yu Cao ◽  
Wanyu Zhang ◽  
...  
Keyword(s):  
Solid State ◽  
Room Temperature ◽  
Low Cost ◽  
Solid Polymer Electrolytes ◽  
Solid Polymer ◽  
Composite Polymer Electrolyte ◽  
Lithium Metal ◽  
Lithium Metal Batteries ◽  
Reinforced Composite ◽  
Li Ion

Solid polymer electrolytes (SPEs) with good flexibility and low cost are very promising for all-solid-state lithium metal batteries, but they suffer from the trad-off between ionic conductivity at room temperature...

Sign in / Sign up

Export Citation Format

Share Document