scholarly journals A New Composite Material on the Base of Carbon Nanotubes and Boron Clusters B12 as the Base for High-Performance Supercapacitor Electrodes

2021 ◽  
Vol 7 (1) ◽  
pp. 26
Author(s):  
Dmitry A. Kolosov ◽  
Olga E. Glukhova
Keyword(s):  
Carbon Nanotubes ◽  
High Performance ◽  
Transmission Function ◽  
Heat Of Formation ◽  
Quantum Capacitance ◽  
Large Area ◽  
First Principle Calculation ◽  
Boron Clusters ◽  
Quantum Capacity ◽  
Branched Surface

We explore the quantum capacitance, stability, and electronic properties of single-walled carbon nanotubes decorated with B12 icosahedral boron clusters by first-principle calculation methods implemented in the SIESTA code. After the optimization of the built supercells, the B12 clusters formed bonds with the walls of the carbon nanotubes and demonstrated metallic properties in all cases. The network of carbon nanotubes with its large area and branched surface is able to increase the capacity of the electric double-layer capacity, but the low quantum capacity of each nanotube in this network limits its application in supercapacitors. We found that the addition of boron clusters to both the outer and inner walls increased the quantum capacitance of carbon nanotubes. The calculation of the transmission function near the Fermi energy showed an increase in the conductivity of supercells. It was also found that an increase in the concentration of boron clusters in the structure led to a decrease in the heat of formation that positively affects the stability of supercells. The calculation of the specific charge density showed that with an increase in the boron concentration, the considered material demonstrated the properties of an asymmetric electrode.

scholarly journals High Performance Printed Electronics on Large Area Flexible Substrates

2020 ◽  
Author(s):  
Mahesh Soni ◽  
Dhayalan Shakthivel ◽  
Adamos Christou ◽  
Ayoub Zumeit ◽  
Nivasan Yogeswaran ◽  
...  
Keyword(s):  
High Performance ◽  
Printed Electronics ◽  
Flexible Substrates ◽  
Large Area

scholarly journals Design of a Sensitive Balloon Sensor for Safe Human–Robot Interaction

Sensors ◽  
2021 ◽  
Vol 21 (6) ◽  
pp. 2163
Author(s):  
Dongjin Kim ◽  
Seungyong Han ◽  
Taewi Kim ◽  
Changhwan Kim ◽  
Doohoe Lee ◽  
...  
Keyword(s):  
High Performance ◽  
Strain Sensor ◽  
High Sensitivity ◽  
Human Robot Interaction ◽  
Large Area ◽  
Tactile Sensors ◽  
Robot Interaction ◽  
Mechanical Crack ◽  
Flexible Strain Sensor ◽  
Contact Sensing

As the safety of a human body is the main priority while interacting with robots, the field of tactile sensors has expanded for acquiring tactile information and ensuring safe human–robot interaction (HRI). Existing lightweight and thin tactile sensors exhibit high performance in detecting their surroundings. However, unexpected collisions caused by malfunctions or sudden external collisions can still cause injuries to rigid robots with thin tactile sensors. In this study, we present a sensitive balloon sensor for contact sensing and alleviating physical collisions over a large area of rigid robots. The balloon sensor is a pressure sensor composed of an inflatable body of low-density polyethylene (LDPE), and a highly sensitive and flexible strain sensor laminated onto it. The mechanical crack-based strain sensor with high sensitivity enables the detection of extremely small changes in the strain of the balloon. Adjusting the geometric parameters of the balloon allows for a large and easily customizable sensing area. The weight of the balloon sensor was approximately 2 g. The sensor is employed with a servo motor and detects a finger or a sheet of rolled paper gently touching it, without being damaged.

scholarly journals Synthesis of silver nanoparticles embedded with single-walled carbon nanotubes for printable elastic electrodes and sensors with high stability

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Jae-Won Lee ◽  
Joon Young Cho ◽  
Mi Jeong Kim ◽  
Jung Hoon Kim ◽  
Jong Hwan Park ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Silver Nanoparticles ◽  
High Performance ◽  
Composite Films ◽  
Single Walled Carbon Nanotubes ◽  
Gauge Factor ◽  
Time Interval ◽  
Single Walled Carbon ◽  
Irradiation Energy ◽  
Walled Carbon Nanotubes

AbstractSoft electronic devices that are bendable and stretchable require stretchable electric or electronic components. Nanostructured conducting materials or soft conducting polymers are one of the most promising fillers to achieve high performance and durability. Here, we report silver nanoparticles (AgNPs) embedded with single-walled carbon nanotubes (SWCNTs) synthesized in aqueous solutions at room temperature, using NaBH4 as a reducing agent in the presence of highly oxidized SWCNTs as efficient nucleation agents. Elastic composite films composed of the AgNPs-embedded SWCNTs, Ag flake, and polydimethylsiloxane are irradiated with radiation from a Xenon flash lamp within a time interval of one second for efficient sintering of conductive fillers. Under high irradiation energy, the stretchable electrodes are created with a maximum conductivity of 4,907 S cm−1 and a highly stretchable stability of over 10,000 cycles under a 20% strain. Moreover, under a low irradiation energy, strain sensors with a gauge factor of 76 under a 20% strain and 5.4 under a 5% strain are fabricated. For practical demonstration, the fabricated stretchable electrode and strain sensor are attached to a human finger for detecting the motions of the finger.

scholarly journals Nanonet: Low-temperature-processed tellurium nanowire network for scalable p-type field-effect transistors and a highly sensitive phototransistor array

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Muhammad Naqi ◽  
Kyung Hwan Choi ◽  
Hocheon Yoo ◽  
Sudong Chae ◽  
Bum Jun Kim ◽  
...  
Keyword(s):  
Low Temperature ◽  
Field Effect ◽  
High Performance ◽  
Field Effect Transistors ◽  
Optical Measurements ◽  
Electrical Performance ◽  
Large Area ◽  
Nanowire Network ◽  
P Type ◽  
Nanowire Networks

AbstractLow-temperature-processed semiconductors are an emerging need for next-generation scalable electronics, and these semiconductors need to feature large-area fabrication, solution processability, high electrical performance, and wide spectral optical absorption properties. Although various strategies of low-temperature-processed n-type semiconductors have been achieved, the development of high-performance p-type semiconductors at low temperature is still limited. Here, we report a unique low-temperature-processed method to synthesize tellurium nanowire networks (Te-nanonets) over a scalable area for the fabrication of high-performance large-area p-type field-effect transistors (FETs) with uniform and stable electrical and optical properties. Maximum mobility of 4.7 cm2/Vs, an on/off current ratio of 1 × 104, and a maximum transconductance of 2.18 µS are achieved. To further demonstrate the applicability of the proposed semiconductor, the electrical performance of a Te-nanonet-based transistor array of 42 devices is also measured, revealing stable and uniform results. Finally, to broaden the applicability of p-type Te-nanonet-based FETs, optical measurements are demonstrated over a wide spectral range, revealing an exceptionally uniform optical performance.

Synergistic effect of carbon nanotubes and graphitic carbon nitride on the enhanced supercapacitor performance of cobalt diselenide-based composites

2021 ◽  
Author(s):  
Mingjie Li ◽  
Xuan Zheng ◽  
Xiang Li ◽  
Youjun Yu ◽  
Jinlong Jiang
Keyword(s):  
Carbon Nanotubes ◽  
Transition Metal ◽  
Synergistic Effect ◽  
Hydrothermal Method ◽  
High Performance ◽  
Carbon Nitride ◽  
Electrode Materials ◽  
One Dimensional ◽  
Supercapacitor Performance ◽  
Metal Selenides

Recently, transition metal selenides have been investigated extensively as promising electrode materials for high-performance supercapacitors. Herein, the multi-component CoSe2/CNTs@g-C3N4 composites are prepared using a two-step hydrothermal method by incorporating one-dimensional...

Sign in / Sign up

Export Citation Format

Share Document