scholarly journals Temperature Analysis of Obstacle Lighting Lamp Working under Various Ambient Conditions: Theoretical and Practical Experiments

2019 ◽  
Vol 9 (22) ◽  
pp. 4951
Author(s):  
Wotzka ◽  
Błachowicz ◽  
Weisser
Keyword(s):  
Numerical Model ◽  
Power Supply System ◽  
Heat Emission ◽  
Operating Conditions ◽  
Physical Models ◽  
Heat Sources ◽  
Ambient Conditions ◽  
Airflow Velocity ◽  
Light Emitting ◽  
Theoretical Analyses

The article presents the results of experimental and theoretical works aimed at determining the distribution of heat emitted by an obstacle lighting lamp. These kind of lamps are commonly applied as a warning for air traffic vehicles. There is a need for lighting devices with various intensities, whose application depends on the location and operating conditions. The overall aim of the author’s work is to develop a computer model that would enable us to conduct research aimed at determining the optimal parameters of lamp operation without the need to build many physical models. Measurements of heat emitted by a currently manufactured lamp were made, and based on these, a numerical model of the lamp operating under laboratory conditions was developed. The considered lamp has two heat sources, one of which is light-emitting diodes (LEDs), while the other heat source consists of stabilizers and other elements of the lamp power supply system. After positive experimental verification of the numerical model, theoretical analyses of heat emission under various meteorological conditions were carried out, while the values of ambient temperature and airflow velocity were changed; then, the influence of these parameters on the temperature distribution on the surface of the lamp was determined.

Distributed Modeling Of Building Systems Through Cyber-Physical Integration

2019 ◽  
pp. 12-17
Keyword(s):  
Data Structure ◽  
Operating Conditions ◽  
Physical Models ◽  
Distributed Model ◽  
Physical Processes ◽  
Distributed Modeling ◽  
Distributed Models ◽  
Operating Modes ◽  
Building Systems ◽  
Important Practical Application

This article describes the proposed approaches to creating distributed models that can, with given accuracy under given restrictions, replace classical physical models for construction objects. The ability to implement the proposed approaches is a consequence of the cyber-physical integration of building systems. The principles of forming the data structure of designed objects and distributed models, which make it possible to uniquely identify the elements and increase the level of detail of such a model, are presented. The data structure diagram of distributed modeling includes, among other things, the level of formation and transmission of signals about physical processes inside cyber-physical building systems. An enlarged algorithm for creating the structure of the distributed model which describes the process of developing a data structure, formalizing requirements for the parameters of a design object and its operating modes (including normal operating conditions and extreme conditions, including natural disasters) and selecting objects for a complete group that provides distributed modeling is presented. The article formulates the main approaches to the implementation of an important practical application of the cyber-physical integration of building systems - the possibility of forming distributed physical models of designed construction objects and the directions of further research are outlined.

scholarly journals Foldable and washable textile-based OLEDs with a multi-functional near-room-temperature encapsulation layer for smart e-textiles

2021 ◽  
Vol 5 (1) ◽  
Author(s):  
So Yeong Jeong ◽  
Hye Rin Shim ◽  
Yunha Na ◽  
Ki Suk Kang ◽  
Yongmin Jeon ◽  
...  
Keyword(s):  
Room Temperature ◽  
Wearable Electronics ◽  
Ambient Conditions ◽  
Light Emitting ◽  
Stable Operating ◽  
Mechanical Durability ◽  
Potential Applications ◽  
Wearable Electronic ◽  
Data Signal ◽  
Wearable Electronic Devices

AbstractWearable electronic devices are being developed because of their wide potential applications and user convenience. Among them, wearable organic light emitting diodes (OLEDs) play an important role in visualizing the data signal processed in wearable electronics to humans. In this study, textile-based OLEDs were fabricated and their practical utility was demonstrated. The textile-based OLEDs exhibited a stable operating lifetime under ambient conditions, enough mechanical durability to endure the deformation by the movement of humans, and washability for maintaining its optoelectronic properties even in water condition such as rain, sweat, or washing. In this study, the main technology used to realize this textile-based OLED was multi-functional near-room-temperature encapsulation. The outstanding impermeability of TiO2 film deposited at near-room-temperature was demonstrated. The internal residual stress in the encapsulation layer was controlled, and the device was capped by highly cross-linked hydrophobic polymer film, providing a highly impermeable, mechanically flexible, and waterproof encapsulation.

scholarly journals Data informed physical models for district heating grids with distributed heat sources to understand thermal and hydraulic aspects

Energy ◽  
2021 ◽  
Vol 222 ◽  
pp. 119965
Author(s):  
Natasa Nord ◽  
Mohammad Shakerin ◽  
Tymofii Tereshchenko ◽  
Vittorio Verda ◽  
Romano Borchiellini
Keyword(s):  
District Heating ◽  
Physical Models ◽  
Heat Sources ◽  
Data Informed

Numerical and Experimental Investigation of Interface Bonding Via Substrate Remelting of an Impinging Molten Metal Droplet

1996 ◽  
Vol 118 (1) ◽  
pp. 164-172 ◽  
Author(s):  
C. H. Amon ◽  
K. S. Schmaltz ◽  
R. Merz ◽  
F. B. Prinz
Keyword(s):  
Heat Transfer ◽  
Numerical Model ◽  
Molten Metal ◽  
Thermal Stresses ◽  
Initial Conditions ◽  
Metal Droplet ◽  
Solid Substrate ◽  
Numerical Results ◽  
Operating Conditions ◽  
Analytical Approaches

A molten metal droplet landing and bonding to a solid substrate is investigated with combined analytical, numerical, and experimental techniques. This research supports a novel, thermal spray shape deposition process, referred to as microcasting, capable of rapidly manufacturing near netshape, steel objects. Metallurgical bonding between the impacting droplet and the previous deposition layer improves the strength and material property continuity between the layers, producing high-quality metal objects. A thorough understanding of the interface heat transfer process is needed to optimize the microcast object properties by minimizing the impacting droplet temperature necessary for superficial substrate remelting, while controlling substrate and deposit material cooling rates, remelt depths, and residual thermal stresses. A mixed Lagrangian–Eulerian numerical model is developed to calculate substrate remelting and temperature histories for investigating the required deposition temperatures and the effect of operating conditions on remelting. Experimental and analytical approaches are used to determine initial conditions for the numerical simulations, to verify the numerical accuracy, and to identify the resultant microstructures. Numerical results indicate that droplet to substrate conduction is the dominant heat transfer mode during remelting and solidification. Furthermore, a highly time-dependent heat transfer coefficient at the droplet/substrate interface necessitates a combined numerical model of the droplet and substrate for accurate predictions of the substrate remelting. The remelting depth and cooling rate numerical results are also verified by optical metallography, and compare well with both the analytical solution for the initial deposition period and the temperature measurements during droplet solidification.

Inlet Air Cooling Applied to Combined Cycle Power Plants: Influence of Site Climate and Thermal Storage Systems

2008 ◽  
Vol 130 (2) ◽  
Author(s):  
Nicola Palestra ◽  
Giovanna Barigozzi ◽  
Antonio Perdichizzi
Keyword(s):  
Power Output ◽  
Parametric Analysis ◽  
Power Plants ◽  
Cooling System ◽  
Thermal Storage ◽  
Combined Cycle ◽  
Operating Conditions ◽  
Air Cooling ◽  
Ambient Conditions ◽  
Cooling Systems

The paper presents the results of an investigation on inlet air cooling systems based on cool thermal storage, applied to combined cycle power plants. Such systems provide a significant increase of electric energy production in the peak hours; the charge of the cool thermal storage is performed instead during the night time. The inlet air cooling system also allows the plant to reduce power output dependence on ambient conditions. A 127MW combined cycle power plant operating in the Italian scenario is the object of this investigation. Two different technologies for cool thermal storage have been considered: ice harvester and stratified chilled water. To evaluate the performance of the combined cycle under different operating conditions, inlet cooling systems have been simulated with an in-house developed computational code. An economical analysis has been then performed. Different plant location sites have been considered, with the purpose to weigh up the influence of climatic conditions. Finally, a parametric analysis has been carried out in order to investigate how a variation of the thermal storage size affects the combined cycle performances and the investment profitability. It was found that both cool thermal storage technologies considered perform similarly in terms of gross extra production of energy. Despite this, the ice harvester shows higher parasitic load due to chillers consumptions. Warmer climates of the plant site resulted in a greater increase in the amount of operational hours than power output augmentation; investment profitability is different as well. Results of parametric analysis showed how important the size of inlet cooling storage may be for economical results.

Study On Automatic Adaptation for Control-Oriented Model of Advanced Diesel Engine

2021 ◽  
Author(s):  
Shunki Nishii ◽  
Yudai Yamasaki
Keyword(s):  
Operating Conditions ◽  
Physical Models ◽  
Model Parameters ◽  
Training Methods ◽  
Model Based Control ◽  
Practical Applications ◽  
Model Based ◽  
Automatic Adaptation ◽  
Automobile Engines ◽  
Adaptation Method

Abstract To achieve high thermal efficiency and low emission in automobile engines, advanced combustion technologies using compression autoignition of premixtures have been studied, and model-based control has attracted attention for their practical applications. Although simplified physical models have been developed for model-based control, appropriate values for their model parameters vary depending on the operating conditions, the engine driving environment, and the engine aging. Herein, we studied an onboard adaptation method of model parameters in a heat release rate (HRR) model. This method adapts the model parameters using neural networks (NNs) considering the operating conditions and can respond to the driving environment and the engine aging by training the NNs onboard. Detailed studies were conducted regarding the training methods. Furthermore, the effectiveness of this adaptation method was confirmed by evaluating the prediction accuracy of the HRR model and model-based control experiments.

scholarly journals Rethinking earthquake-related DC-ULF electromagnetic phenomena: towards a physics-based approach

2011 ◽  
Vol 11 (11) ◽  
pp. 2941-2949 ◽  
Author(s):  
Q. Huang
Keyword(s):  
Laboratory Experiments ◽  
Physical Models ◽  
Short Term ◽  
Integrated Research ◽  
Weak Earthquake ◽  
Electromagnetic Signals ◽  
Short Term Prediction ◽  
Noisy Background ◽  
Theoretical Analyses ◽  
Physical Quantities

Abstract. Numerous electromagnetic changes possibly related with earthquakes have been independently reported and have even been attempted to apply to short-term prediction of earthquakes. However, there are active debates on the above issue because the seismogenic process is rather complicated and the studies have been mainly empirical (i.e. a kind of experience-based approach). Thus, a physics-based study would be helpful for understanding earthquake-related electromagnetic phenomena and strengthening their applications. As a potential physics-based approach, I present an integrated research scheme, taking into account the interaction among observation, methodology, and physical model. For simplicity, this work focuses only on the earthquake-related DC-ULF electromagnetic phenomena. The main approach includes the following key problems: (1) how to perform a reliable and appropriate observation with some clear physical quantities; (2) how to develop a robust methodology to reveal weak earthquake-related electromagnetic signals from noisy background; and (3) how to develop plausible physical models based on theoretical analyses and/or laboratory experiments for the explanation of the earthquake-related electromagnetic signals observed in the field conditions.

Ambient Condition Effects on NOx and CO Emissions From Process Heaters

2008 ◽  
Author(s):  
Wesley R. Bussman ◽  
Charles E. Baukal
Keyword(s):  
Atmospheric Pressure ◽  
Ambient Air ◽  
Operating Conditions ◽  
Nox Emissions ◽  
Ambient Conditions ◽  
Fuel Gas ◽  
Natural Draft ◽  
Actual Operating ◽  
Wide Range ◽  
Pollution Emissions

Because process heaters are typically located outside, their operation is subject to the weather. Heaters are typically tuned at a given set of conditions; however, the actual operating conditions may vary dramatically from season to season and sometimes even within a given day. Wind, ambient air temperature, ambient air humidity, and atmospheric pressure can all significantly impact the O2 level, which impacts both the thermal efficiency and the pollution emissions from a process heater. Unfortunately, most natural draft process burners are manually controlled on an infrequent basis. This paper shows how changing ambient conditions can considerably impact both CO and NOx emissions if proper adjustments are not made as the ambient conditions change. Data will be presented for a wide range of operating conditions to show how much the CO and NOx emissions can be affected by changes in the ambient conditions for fuel gas fired natural draft process heaters, which are the most common type used in the hydrocarbon and petrochemical industries. Some type of automated burner control, which is virtually non-existent today in this application, is recommended to adjust for the variations in ambient conditions.

Centrifuge modelling of heat-generating waste disposal

1989 ◽  
Vol 26 (4) ◽  
pp. 640-652 ◽  
Author(s):  
F. Poorooshasb ◽  
R. G. James
Keyword(s):  
Waste Disposal ◽  
Field Tests ◽  
Free Fall ◽  
Heat Emission ◽  
Centrifuge Modelling ◽  
Depth Of Penetration ◽  
Geotechnical Centrifuge ◽  
Pressure Changes ◽  
Deformation Patterns ◽  
Theoretical Analyses

A set of experiments, conducted on the Cambridge geotechnical centrifuge and which model the free-fall option for the subseabed disposal of heat-generating waste, is reported. The results reported relate to the morphological effects of model penetration (depth of penetration, deformation patterns, and closure) as well as to the pore pressure changes associated with this penetration. Results regarding the effect of heat emission (from the model penetrators) upon the surrounding soil are also presented. These results are discussed and compared with theoretical analyses and field tests, and conclusions are presented regarding both the processes attendant upon penetration and heating and the relevance of the modelling to the prototype event. Key words: centrifuge modelling, heat-generating waste disposal, projectile penetration.

Studies of Degradation in Nichia AlGaN/InGaN/GaN Blue Light Emitting Diodes Under Close to Normal Operating Conditions

1996 ◽  
Vol 421 ◽  
Author(s):  
M. Osiński ◽  
D. L. Barton ◽  
C. J. Helms ◽  
P. Perlin ◽  
N. H. Berg ◽  
...  
Keyword(s):  
Blue Light ◽  
Light Emitting Diodes ◽  
Defect Density ◽  
Degradation Process ◽  
Operating Conditions ◽  
Similar Amount ◽  
Life Testing ◽  
Light Emitting ◽  
High Pulsed Current ◽  
The Impact

AbstractThe reliability of devices fabricated in GaN and related alloys, especially under high current densities as would be found in lasers, has yet to be fully characterized. Our previous work [1] investigated the degradation of GaN-based blue light emitting diodes (LEDs) under high pulsed current stress. This work indicated a possible correlation between the high crystal defect density and failures caused by metal migration along these defect tubes. To assess the impact of this data on devices under more normal conditions, several LEDs from both older and more recent production lots were placed in a controlled temperature and current environment for several thousand hours. The test started with a constant 20 mA current for the first 1000 hours and continued for another 1650 hours at various currents up to 70 mA, all at a temperature of 23 °C. During this test, one of the older generation LED's output degraded by more than 50%. Subsequent failure analysis showed that this was caused by a crack which isolated part of the active region from the p-contact. The remaining LEDs were returned to life testing where the temperature was subsequently increased by 5 °C after each 500 hours of testing. The output from one of the newer LEDs dreiven at 70 mA degraded to 55% of its original value after 3600 hours and a second newer LED degraded by a similar amount after 4400 hours. The first failure, LED #16, did not exhibit a significant change in its I-V characteristics indicating that a change in the package transparency was a likely cause for the observed degradation. The second failure, LED #17, did show a noticeable change in its I-V characteristics. This device was subsequently returned to life testing where the degradation process will be monitored for further changes.

Sign in / Sign up

Export Citation Format

Share Document