scholarly journals Electrowetting on Dielectric (EWOD) Device with Dimple Structures for Highly Accurate Droplet Manipulation

2019 ◽  
Vol 9 (12) ◽  
pp. 2406 ◽  
Author(s):  
Katsuo Mogi ◽  
Shungo Adachi ◽  
Naoki Takada ◽  
Tomoya Inoue ◽  
Tohru Natsume
Keyword(s):  
High Speed ◽  
Thin Sheet ◽  
Digital Microfluidics ◽  
Three Dimensional ◽  
Substrate Type ◽  
Droplet Motion ◽  
Electrowetting On Dielectric ◽  
Flat Substrate ◽  
Single Substrate ◽  
Droplet Manipulation

Digital microfluidics based on electrowetting on dielectric (EWOD) devices has potential as a fundamental technology for the accurate preparation of dangerous reagents, the high-speed dispensing of rapidly deteriorating reagents, and the fine adjustment of expensive reagents, such as the preparation of for positron emission tomography (PET). To allow single substrate type EWODs to be practically used in an automatic operation system, we developed a dimple structure as a key technique for a highly accurate droplet manipulation method. The three-dimensional shape of the dimple structure is embossed onto a disposable thin sheet. In this study, we confirmed that the dimple structure can suppress unintended droplet motion caused by unidentified factors. In addition, the stability of the droplets on the dimple structures was evaluated using a sliding experiment. On a flat substrate, the success rate of a droplet motion was lower than 70.8%, but on the dimple structure, the droplets were able to be moved along the dimple structures correctly without unintended motion caused by several environmental conditions. These results indicated that the dimple structure increased the controllability of the droplets. Hence, the dimple structure will contribute to the practical application of digital microfluidics based on single substrate type EWODs.

scholarly journals Scaling Electrowetting with Printed Circuit Boards for Large Area Droplet Manipulation

MRS Advances ◽  
2018 ◽  
Vol 3 (26) ◽  
pp. 1475-1483 ◽  
Author(s):  
Udayan Umapathi ◽  
Samantha Chin ◽  
Patrick Shin ◽  
Dimitris Koutentakis ◽  
Hiroshi Ishii
Keyword(s):  
Printed Circuit Boards ◽  
Dielectric Material ◽  
Point Of Care ◽  
Digital Microfluidics ◽  
Microfluidic Devices ◽  
Electrode Arrays ◽  
Large Area ◽  
Lab On Chip ◽  
Electrowetting On Dielectric ◽  
Droplet Manipulation

ABSTRACTDroplet based microfluidics (digital microfluidics) with Electrowetting on dielectric (EWOD) has gained popularity with the promise of being technology for a true lab-on-chip device with applications spanning across assays/library prep, next-gen sequencing and point-of-care diagnostics. Most electrowetting device architecture are linear electrode arrays with a shared path for droplets, imposing serious limitations -- cross contamination and limited number of parallel operations. Our work is in addressing these issues through large 2D grid arrays with direct addressability providing flexible programmability.Scaling electrowetting to larger arrays still remains a challenge due to complex and expensive cleanroom fabrication of microfluidic devices. We take the approach of using inexpensive PCB manufacturing, investigate challenges and solutions for scaling electrowetting to large area droplet manipulation. PCB manufactured electrowetting arrays impose many challenges due to the irregularities from process and materials used. These challenges generally relate to preparing the surface that interfaces with droplets -- a dielectric material on the electrodes and the top most hydrophobic coating that interfaces with the droplets. A requirement for robust droplet manipulation with EWOD is thin (<10um) hydrophobic dielectric material which does not break down at droplet actuation voltages (AC/DC, 60V to 200V) and has a no droplet pinning. For this, we engineered materials specifically for large area PCBs.Traditionally, digital microfluidic devices sandwich droplets between two plates and have focussed on sub-microliter droplet volumes. In our approach, droplets are on an open surface with which we are able to manipulate droplets in microliter and milliliter volumes. With milliliter droplet manipulation ability on our electrowetting device, we demonstrate “digital millifluidics”. Finally, we report the performance of our device and to motivate the need for large open arrays we show an example of running multiple parallel biological experiments.

Mechanical-activated digital microfluidics with gradient surface wettability

Lab on a Chip ◽  
2019 ◽  
Vol 19 (2) ◽  
pp. 223-232 ◽  
Author(s):  
Lin Qi ◽  
Ye Niu ◽  
Cody Ruck ◽  
Yi Zhao
Keyword(s):  
Digital Microfluidics ◽  
Hydrophobic Surface ◽  
Surface Wettability ◽  
Long Distance ◽  
Droplet Motion ◽  
Surface Patterns ◽  
Droplet Manipulation ◽  
Gradient Surface

Long-distance droplet motion and selective droplet manipulation on repeated hydrophobic surface patterns with gradient wettability by in-plane cyclic vibration.

scholarly journals Light-Driven Droplet Manipulation Technologies for Lab-on-a-Chip Applications

2011 ◽  
Vol 2011 ◽  
pp. 1-12 ◽  
Author(s):  
Sung-Yong Park ◽  
Pei-Yu Chiou
Keyword(s):  
High Speed ◽  
Digital Microfluidics ◽  
Lab On A Chip ◽  
High Energy ◽  
High Energy Density ◽  
Massively Parallel ◽  
Physical Mechanisms ◽  
Recent Developments ◽  
Droplet Manipulation ◽  
Light Beams

Droplet-based (digital) microfluidics has been demonstrated in many lab-on-a-chip applications due to its free cross-contamination and no dispersion nature. Droplet manipulation mechanisms are versatile, and each has unique advantages and limitations. Recently, the idea of manipulating droplets with light beams either through optical forces or light-induced physical mechanisms has attracted some interests, since light can achieve 3D addressing, carry high energy density for high speed actuation, and be patterned and dynamically reconfigured to generate a large number of light beams for massively parallel manipulation. This paper reviews recent developments of various optical technologies for droplet manipulation and their applications in lab-on-a-chip.

High-speed brightfield 3-D imaging and 3-D image analysis of thick and overlapped cell clusters in cytological preparations

1994 ◽  
Vol 52 ◽  
pp. 218-219
Author(s):  
Robert W. Mackin
Keyword(s):  
Image Analysis ◽  
High Speed ◽  
Three Dimensional ◽  
Image Data ◽  
Ccd Camera ◽  
Objective Lens ◽  
Array Processor ◽  
Vaginal Smears ◽  
Low Contrast ◽  
Computer Controlled

This paper presents two advances towards the automated three-dimensional (3-D) analysis of thick and heavily-overlapped regions in cytological preparations such as cervical/vaginal smears. First, a high speed 3-D brightfield microscope has been developed, allowing the acquisition of image data at speeds approaching 30 optical slices per second. Second, algorithms have been developed to detect and segment nuclei in spite of the extremely high image variability and low contrast typical of such regions. The analysis of such regions is inherently a 3-D problem that cannot be solved reliably with conventional 2-D imaging and image analysis methods.High-Speed 3-D imaging of the specimen is accomplished by moving the specimen axially relative to the objective lens of a standard microscope (Zeiss) at a speed of 30 steps per second, where the stepsize is adjustable from 0.2 - 5μm. The specimen is mounted on a computer-controlled, piezoelectric microstage (Burleigh PZS-100, 68/μm displacement). At each step, an optical slice is acquired using a CCD camera (SONY XC-11/71 IP, Dalsa CA-D1-0256, and CA-D2-0512 have been used) connected to a 4-node array processor system based on the Intel i860 chip.

Effects of Three-Dimensional Pressure Gradients on High-Speed Turbulent Boundary Layers

2021 ◽  
Author(s):  
Scott J. Peltier ◽  
Brian E. Rice ◽  
Ethan Johnson ◽  
Venkateswaran Narayanaswamy ◽  
Marvin E. Sellers
Keyword(s):  
Boundary Layers ◽  
High Speed ◽  
Three Dimensional ◽  
Turbulent Boundary Layers ◽  
Pressure Gradients

Three-Dimensional Imaging through Shock-Waves at Ultra-High Speed.

2018 ◽  
Author(s):  
Yi Chen Mazumdar ◽  
Michael E. Smyser ◽  
Jeffery Dean Heyborne ◽  
Daniel Robert Guildenbecher
Keyword(s):  
Shock Waves ◽  
High Speed ◽  
Three Dimensional ◽  
Three Dimensional Imaging ◽  
Ultra High Speed

scholarly journals High-speed volumetric two-photon fluorescence imaging of neurovascular dynamics

2020 ◽  
Vol 11 (1) ◽  
Author(s):  
Jiang Lan Fan ◽  
Jose A. Rivera ◽  
Wei Sun ◽  
John Peterson ◽  
Henry Haeberle ◽  
...  
Keyword(s):  
Blood Flow ◽  
High Speed ◽  
Laser Scanning ◽  
Three Dimensional ◽  
Laser Scanning Microscopy ◽  
Fluorescence Signal ◽  
Imaging Method ◽  
Spatiotemporal Resolution ◽  
Two Photon

AbstractUnderstanding the structure and function of vasculature in the brain requires us to monitor distributed hemodynamics at high spatial and temporal resolution in three-dimensional (3D) volumes in vivo. Currently, a volumetric vasculature imaging method with sub-capillary spatial resolution and blood flow-resolving speed is lacking. Here, using two-photon laser scanning microscopy (TPLSM) with an axially extended Bessel focus, we capture volumetric hemodynamics in the awake mouse brain at a spatiotemporal resolution sufficient for measuring capillary size and blood flow. With Bessel TPLSM, the fluorescence signal of a vessel becomes proportional to its size, which enables convenient intensity-based analysis of vessel dilation and constriction dynamics in large volumes. We observe entrainment of vasodilation and vasoconstriction with pupil diameter and measure 3D blood flow at 99 volumes/second. Demonstrating high-throughput monitoring of hemodynamics in the awake brain, we expect Bessel TPLSM to make broad impacts on neurovasculature research.

Sign in / Sign up

Export Citation Format

Share Document