scholarly journals Effects of Aggregate Micro Fines (AMF), Aluminum Sulfate and Polypropylene Fiber (PPF) on Properties of Machine-Made Sand Concrete

2019 ◽  
Vol 9 (11) ◽  
pp. 2250 ◽  
Author(s):  
Hang He ◽  
Yuli Wang ◽  
Junjie Wang
Keyword(s):  
Compressive Strength ◽  
Aluminum Sulfate ◽  
Polypropylene Fiber ◽  
Test Method ◽  
Polypropylene Fibers ◽  
Chloride Permeability ◽  
River Sand ◽  
Permeability Coefficients ◽  
Increasing Demand ◽  
Micro Fines

With the depletion and increasing demand of river sand, machine-made sand could be used more and more in concrete. In order to improve the properties of machine-made sand concrete, the effects of the aggregate micro fines (AMF) content, aluminum sulfate, and polypropylene fibers (PPF) on the slump, compressive strength, water permeability, and the chloride permeability coefficients were investigated through a single factor test method, and related mechanisms were analyzed. The results show that the optimum contents of AMF, aluminum sulfate, and the polypropylene fiber are 10 wt%, 1 wt%, and 0.6 kg/m3, respectively. The optimum content of AMF improved the compactness of concrete. The addition of aluminum sulfate promoted the initial formation of ettringite, and thereby improved the compressive strength and the permeability resistance. The polypropylene fiber can modify the pore structure distribution of concrete and reduce the porosity, thereby improving the impermeability of the concrete. The compressive strength of the machine-made sand concrete could be increased by more than 20%, and the water/chloride permeability coefficients could be decreased by more than 45%.

The Reasonable Amount of Polypropylene Fiber on Low-Intensity Manufactured Sand Concrete in the Case of Fixed Powder Paste

2014 ◽  
Vol 1065-1069 ◽  
pp. 2005-2010
Author(s):  
Hao Lu ◽  
Gu Hua Li ◽  
Jia Wei Yang ◽  
Liang Zhang ◽  
Ze Jiang Sun ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Cement Paste ◽  
Polypropylene Fiber ◽  
Particle Type ◽  
River Sand ◽  
Manufactured Sand ◽  
Low Intensity ◽  
Reasonable Amount

Compared with the river sand, manufactured sand’s particle type and gradation is relatively poor and the surface is mat .The manufactured sand also has a big effect on the workability of concrete. In this paper,the Equivalent powder paste’s volume of manufactured sand concrete was determined according to Mehta and Aitcin’s ideas for the preparation of HPC,at the same time,the equivalent powder paste volume is assumed as the cement paste volume in the experiment. The influence of polypropylene fiber on Manufactured sand concrete’s workability and Compressive strength were researched in the case of fixed powder paste .

scholarly journals Orthogonal Analysis on Mechanical Properties of Basalt–Polypropylene Fiber Mortar

Materials ◽  
2020 ◽  
Vol 13 (13) ◽  
pp. 2937
Author(s):  
Huimin Chen ◽  
Chunyan Xie ◽  
Chao Fu ◽  
Jing Liu ◽  
Xiuli Wei ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Flexural Strength ◽  
Volume Content ◽  
Fiber Length ◽  
Content Volume ◽  
Polypropylene Fiber ◽  
Basalt Fiber ◽  
Test Method ◽  
Test Results ◽  
Fiber Volume

Orthogonal test method was applied to analyze the strength properties of basalt-polypropylene mortar. The effect of basalt fiber length, polypropylene fiber length, basalt fiber volume content and polypropylene fiber volume content on the 28 d cube compressive strength and flexural strength were investigated. Test results show that comparing with flexural strength, the influence of basalt fiber length and polypropylene fiber length on compressive strength of mortar was greater than on flexural strength. The length of polypropylene fibers contributes the highest to the flexural strength. The effect of basalt fiber on mortar strength is the largest with 6 mm length and 4% content. Polypropylene fiber length has the greatest influence on the compressive strength of fiber mortar, followed by basalt fiber volume content. Volume content of polypropylene fiber has the greatest influence on flexural strength of fiber mortar, followed by polypropylene fiber length. According to the scoring of the efficacy coefficient method, the best ratio combination for compressive and flexural strength was the basalt fiber length of 9 mm, polypropylene fiber length of 6 mm, basalt fiber volume content of 4% and polypropylene fiber volume content of 4%. Compared with the blank samples, the 28 d compressive strength and 28 d flexural strength of the cement mortar samples were increased by 27.4% and 49% respectively. According to the test results, the properties of the fiber were analyzed and evaluated and the mechanism of fiber action and fiber microstructure were analyzed.

Experiment and Research on Mechanic Behavior of Concrete with Different Addition Amounts of Polypropylene Fibers

2012 ◽  
Vol 430-432 ◽  
pp. 1064-1067
Author(s):  
Yu Zhi Chen ◽  
Wei Hong Xuan ◽  
Xiao Hong Chen
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Polypropylene Fiber ◽  
Polypropylene Fibers ◽  
Flexural Tensile Strength ◽  
Axial Compressive Strength ◽  
Low Dosage

The effect of the different addition amounts of polypropylene fibers on the basic mechanical properties of concrete were investigated in this paper. The results show that the flexural tensile strength of concrete changed slightly after adding low-dosage polypropylene fiber(0.04%～0.16%); Axial compressive strength and flexural tension modulus decreased, limiting flexural strain increased gradually with the amounts of fibers rising.

Polypropylene Fiber Reinforced Concrete for Rigid Airfield Pavement

2011 ◽  
Vol 228-229 ◽  
pp. 627-633
Author(s):  
Tammam Merhej ◽  
Liang Liang Cheng ◽  
De Cheng Feng
Keyword(s):  
Compressive Strength ◽  
Flexural Strength ◽  
Volume Fraction ◽  
Polypropylene Fiber ◽  
Fiber Reinforced Concrete ◽  
Modulus Of Rupture ◽  
Polypropylene Fibers ◽  
Strength Ratio ◽  
Flexural Toughness ◽  
Volume Fractions

The effect of adding polypropylene fibers; with different shapes and volume fractions; on the compressive strength, modulus of rupture, load-deflection curve and flexural toughness (equivalent flexural strength ratio) of concrete was investigated. Crimped and twisted polypropylene fibers were used with 0.0%, 0.2%, 0.4% and 0.6% volume fractions. It was found that the compressive strength, flexural strength and the equivalent flexural strength ratio of concrete increased about 11%, 25% and 40% respectively by adding 0.6% volume fraction of twisted polypropylene fiber. In addition; it was found that the contribution of polypropylene fiber to the flexural strength and flexural toughness was more effective when twisted polypropylene fiber was added comparing to crimped polypropylene fibers. The experimental results were used in numerical example using FAARFIELD program to explore the airfield pavement thickness reduction resulted from polypropylene fiber incorporation.

scholarly journals Influence of polypropylene fiber on early strength of self-compacting concrete

2019 ◽  
Vol 258 ◽  
pp. 01020
Author(s):  
Rahmi Karolina ◽  
Abdiansyah Putra Siregar
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Polypropylene Fiber ◽  
Fiber Content ◽  
Polypropylene Fibers ◽  
Self Compacting Concrete ◽  
Concrete Technology ◽  
Early Strength

One of the development of concrete technology in construction’s world is Self-Compacting Concrete. Self-Compacting Concrete (SCC) is an innovative concrete that able to “flow” and condensed by gravity and its own weight with little vibration or even without a vibration device at all. However, these concrete still have deficiencies like general concrete that is weak to tensile. To increase the tensile strength of the concrete is by adding fiber into the mix. One type of fiber that can be used as an additive to the mix is Polypropylene fibers. This study aims to determine the effect of adding polypropylene fibers to the mechanical properties and characteristics of SCC concrete and to know the optimal polypropylene fiber content in the manufacture of Self Compacting Concrete. Fiber addition variations are 0 kg / m3; 0.25 kg / m3; 0.5 kg / m3 and 0.75 kg / m3. The result of the research showed that the variation of 0.5 kg / m3 and 0.75 kg / m3 addition of fibers didn’t fulfill the requirements to be categorized as a SCC concrete. The results of hard concrete test showed the highest compressive strength that is on the SCC PP concrete of 22.31 MPa at the age of 1 day and 46.24 at the age of 28 days. The highest strength is on the SCC 0.25 PP concrete of 6.52 MPa at the age of 1 day and 10.07 at the age of 28 days. The highest flexural strength is on the SCC 0.25 PP concrete of 6.76 at the age of 1 day and 8.60 at the age of 28 days.

scholarly journals Effect of Addition Polypropylene Fiber on Compressive Strength and Permeability Values in Porous Concrete

2021 ◽  
Vol 27 (1) ◽  
pp. 135-142
Author(s):  
Wira Rante Paganggi ◽  
Amelia Makmur ◽  
Rachmansyah Rachmansyah
Keyword(s):  
Compressive Strength ◽  
Polypropylene Fiber ◽  
Polypropylene Fibers ◽  
Chemical Additives ◽  
Chemical Additive ◽  
Porous Concrete ◽  
Concrete Mixtures ◽  
Catchment Areas ◽  
Water Catchment ◽  
Reduced Water

The infrastructure growth has an impact on reducing green areas, which will be followed by reduced water catchment areas. Porous concrete is one of the porous materials that can be used on a pedestrian walk, which is able to drain water. The porous concrete has a limitation strength. This research aims to determine the effect of using various content of chemical additive and polypropylene fibers for porous concrete mixtures related to the compressive strength and permeability values. This experimental method referring to ACI 522R-10 Standard. That specimens using chemical additives and variations of polypropylene fibers: 0.05%, 0.1%, 0.15%, 0.2%, and 0.25% by weight of cement. The results showed that the specimen which had the highest compressive strength was 16.9 MPa, which was added 0.25% polypropylene fiber. The addition of polypropylene fibers increases the compressive strength value by 5.6%. Based on the compressive strength and permeability graphs, it can be estimated that the optimal content of polypropylene fiber is 0.17% by weight of cement.

scholarly journals Mechanical Properties of Mortar Using Polypropylene Fibers

2020 ◽  
pp. 1-4
Author(s):  
Eethar Thanon Dawood ◽  
◽  
Tamara Waleed Ghanim ◽  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Volume Fraction ◽  
Polypropylene Fiber ◽  
Splitting Tensile Strength ◽  
Experimental Results ◽  
Polypropylene Fibers ◽  
Low Volume

In the present paper the behavior of mortar reinforced with polypropylene fibers was studied. Different percentages of polypropylene fibers such as 0, 0.2, 0.4, 0.6 and 0.8% as volumetric fractions were used. Different properties which are flowability, density, compressive strength, flexural strength and splitting tensile strength were evaluated for all mix combinations. The experimental results indicated that a reduction in flowability was obtained with increased polypropylene fibers content. Besides, it can be concluded that the incorporation of polypropylene fiber may significantly reduce the density of mortar. The use of low volume fraction of polypropylene fiber improves the mechanical properties of HPM. Thus, the use of 0.2% of such fiber increases compressive strength by about (4-10%), at various ages.

Effect of Polypropylene Fibers on some Mechanical Properties of Concrete and Durability against Freezing and Thawing Cycles

2021 ◽  
Vol 895 ◽  
pp. 130-138
Author(s):  
Maher Faroq Al-Lebban ◽  
Abeer Ibraheem Khazaly ◽  
Rana Shabbar ◽  
Qusay A. Jabal ◽  
Layth Abdul Rasool Al Asadi
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Modulus Of Elasticity ◽  
Polypropylene Fiber ◽  
Fiber Reinforced Concrete ◽  
Polypropylene Fibers ◽  
Freezing And Thawing ◽  
Freezing And Thawing Cycles ◽  
Durability Of Concrete

This investigation aims to improve some of the mechanical properties of concrete such as compressive strength, flexural strength, and modulus of elasticity, by using different percentages of polypropylene fibers, and also studying the durability of concrete for freeze-thaw cycles. the study shows a small increment in compressive strength due to adding fibers which were 28.3% compared with increment in flexural strength which was perfect (about 191%), modulus of elasticity also increased by adding fibers. The durability of concrete against freezing-thaw cycles for all mixes was studied. Fiber-reinforced concrete shows more durability against freezing-thawing cycles and less reduction in strength compared with reference mixes without fibers,21.5% reduction in strength for optimum polypropylene fiber concrete while the reduction in strength for normal concrete was found 54.2% in this study.

Mechanics Performance of High-Performance Concrete with Polypropylene Fibers

2011 ◽  
Vol 99-100 ◽  
pp. 1233-1238
Author(s):  
Hong Xiu Du ◽  
Yi Xiao Qin ◽  
Wei Zhang ◽  
Ning Zhang ◽  
Xiao Yu Hao
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Beneficial Effect ◽  
High Performance ◽  
High Performance Concrete ◽  
Polypropylene Fiber ◽  
Polypropylene Fibers ◽  
Micro Cracks ◽  
Mechanics Performance ◽  
Stress And Deformation

The mechanics properties of HPC mixing different dosage and length of polypropylene fiber were investigated in this study. The results showed that the addition of appropriate amount and length of polypropylene fibers in HPC led to an effective improvement in the tensile strength and a little change in the compressive strength of HPC. The pronounced improvement can be attributed to the beneficial effect of polypropylene fiber on HPC by restraining the generation and development of the micro cracks in concrete, enhancing the level of stress and deformation and damage characteristics in HPC, furthermore, extending the durability and safety of concrete structure.

scholarly journals Flexural Behavior of Polypropylene Fiber Reinforced Concrete Beams

2019 ◽  
Vol 8 (4S2) ◽  
pp. 100-103
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Polypropylene Fiber ◽  
Strength Test ◽  
Heat Of Hydration ◽  
Flexural Behavior ◽  
Polypropylene Fibers ◽  
Mass Concrete ◽  
Fiber Reinforced

This paper portrays an experimental research conducted to determine the strength and flexural behavior of the polypropylene fiber reinforced beams. Polypropylene fibers were being added in concrete with different dosages viz., 0.6, 0.8, 1.0, 1.2, 1.4, and 1.6% to the total volume of concrete and Ordinary Portland Cement (OPC) and Portland Slag Cements (PSC) were added in the ratio of 60:40 with the overall cement content. Cubes were cast for compressive strength test and cylinder were cast for tensile strength test and beams were cast for flexural strength test. Seven beams were tested; one normal beam without polypropylene fiber and six beams with polypropylene fiber were cast and flexural strength test was conducted. Polypropylene fiber and slag cements were used in mass concrete structures to reduce heat of hydration and shrinkage cracks. Flexural strength and the cracking pattern were monitored during the test. The results indicated that the addition of polypropylene fibers and slag cements in concrete significantly increased the compressive strength, tensile strength, flexural strength and load carrying capacity of beams with different cracking patterns

Sign in / Sign up

Export Citation Format

Share Document