scholarly journals The Influence of Crack Modes on the Elastic Wave Propagation Characteristics in a Non-Uniform Rotating Shaft

2018 ◽  
Vol 8 (11) ◽  
pp. 2105 ◽  
Author(s):  
Yimin Wei ◽  
Xuan Shi ◽  
Qi Liu ◽  
Wenhua Chen

The transverse crack in a non-uniform shaft possesses different crack modes, and it can affect the propagation characteristics of the elastic waves in the shaft. The influence of the crack mode as well as the location and the depth of the crack and the rotating speed to the propagation characteristics is investigated in this paper. Firstly, the transfer matrix for the elastic wave in a non-uniform shaft is obtained by deducing the local flexibility coefficients of the three typical crack modes, in which the transverse crack is modeled as a local spring. After that, the influence of the crack mode to the propagation characteristics is studied both in a numerical and an experimental way. Finally, the influence of the location and the depth of the transverse crack as well as the rotating speed of the shaft is studied too. It is found that Mode III is the most suitable mode in this paper, the location of the crack will make the stopbands fluctuating, the depth mainly affects the bandwidth of the stopbands, and the increase of the rotating speed will shift up the stopbands without changing the bandwidths. The results can help to detect and locate a transverse crack.

Author(s):  
Yimin Wei ◽  
Xuan Shi ◽  
Qi Liu ◽  
Wenhua Chen

The vibration propagates in a media such as a shaft in the form of elastic waves. The propagation characteristics of the waves are affected by the geometry of the media, the material properties as well as the cracks. The study to elastic waves propagating in a shaft with transverse cracks can help to detect them. The transverse crack possesses different crack modes due to different external loads. The influence of the crack mode, the location and the depth to the propagation characteristics is investigated in this paper. Firstly, the local flexibility coefficients with three different modes are deduced. And then, the transfer matrix of the elastic wave can be obtained. Finally, the influence of the crack mode, the location and the depth of the transverse crack as well as the rotating speed to the propagation characteristics is then studied, both in a numerical and an experimental way. It’s found that mode III is the most suitable mode in this paper, the location of the crack will make the stopbands fluctuating, the depth mainly affects the bandwidth of the stopbands, and the increase of the rotating speed will shift up the stopbands without changing their bandwidths.


Geophysics ◽  
1972 ◽  
Vol 37 (3) ◽  
pp. 445-455 ◽  
Author(s):  
C. N. G. Dampney ◽  
B. B. Mohanty ◽  
G. F. West

Simple electronic circuitry and axially polarized ceramic transducers are employed to generate and detect elastic waves in a two‐dimensional analog model. The absence of reverberation and the basic simplicity. of construction underlie the advantages of this system. If the form of the fundamental wavelet in the model itself, as modified by the linear filtering effects of the remainder of the system, can be found, then calibration is achieved. This permits direct comparison of theoretical and experimental seismograms for a given model if its impulse response is known. A technique is developed for calibration and verified by comparing Lamb’s theoretical and experimental seismograms for elastic wave propagation over the edge of a half plate. This comparison also allows a critical examination of the basic assumptions inherent in a model seismic system.


Author(s):  
И.Б. Петров

Существует значительное количество прикладных задач, для решения которых применяется математическое моделирование динамических процессов в деформируемых средах. К таким задачам относят моделирование распространения упругих волн в геологических средах, в том числе с учетом ледовых образований, их рассеяния на зонах трещиноватости. Актуальность этих постановок обусловлена важностью решения обратных задач сейсмической разведки, обработки данных сейсмической разведки с целью уточнения запасов углеводородов и определения расположения углеводородов и других полезных ископаемых. Поэтому приобретает важность разработка высокоточных численных методов, позволяющих моделировать упругие волны в деформируемых средах. Одним из этих методов является сеточно-характеристический численный метод, примененный в данной работе. Этот численный метод применяется для решения прямых задач, то есть для расчета распространения упругих волн при известных параметрах рассматриваемой среды. А для решения обратной задачи по восстановлению параметров геологической среды по данным сейсмической разведки можно применять нейронные сети, для обучения которых можно использовать многократное решение прямых задач сеточно-характеристическим методом. В данной работе приведены примеры решения разнообразных прямых задач по распространению упругих волн в неоднородных геологических средах, в том числе в зоне Арктики, а также представлена постановка задачи по обучению нейронных сетей и графики, показывающие эффективность их обучения с использованием двух различных подходов. Many problems can be solved with the simulation of dynamic processes in deformable media. They are the simulation of elastic wave propagation in rocks including ice formations, and wave scattering on rock-fracture zones. Such studies are important for solving inverse problems of seismic exploration and seismic data processing to get a better estimation of hydrocarbon reserves, locate hydrocarbons and other minerals. Therefore, it is necessary to develop high-precision numerical methods used to simulate elastic waves in deformable media. One of such methods is the grid-characteristic approach used in this work. It is suitable for solving direct problems, i.e., to analyze the propagation of elastic waves in a medium with known properties. Neural networks can be applied to solve the inverse problem: reconstructing the geology from seismic survey data. Multiple solving of direct problems by the gridcharacteristic approach is used for network training. This paper contains some examples of solving a range of direct problems on the elastic wave propagation in heterogeneous rocks, also in the Arctic zone, and the problem statement for training neural networks and graphs is proposed to demonstrate the efficiency of training with two approaches.


Author(s):  
Bernhard R. Tittmann

Elastic wave propagation in porous media will be introduced by a discussion of scattering to show the use of broad frequency band pulses in relating the attenuation, velocity and backscattering to information on porosity. Examples will be given for microporosity in castings and powder metal components. This will be followed by a discussion of the influence of volatiles within the pores on the absorption of elastic waves in porous ceramics and rocks. Implications of these findings will be given for ultrasonic device applications and for the interpretation of the lunar seismic experiments carried out as part of the Apollo missions to the moon.


2015 ◽  
Vol 20 (1) ◽  
pp. 159-170 ◽  
Author(s):  
M. Rucka ◽  
B. Zima

Abstract This study deals with experimental and numerical investigations of elastic wave propagation in steel bars partially embedded in mortar. The bars with different bonding lengths were tested. Two types of damage were considered: damage of the steel bar and damage of the mortar. Longitudinal waves were excited by a piezoelectric actuator and a vibrometer was used to non-contact measurements of velocity signals. Numerical calculations were performed using the finite elements method. As a result, this paper discusses the possibility of condition assessment in bars embedded in mortar by means of elastic waves.


2020 ◽  
Vol 56 (1) ◽  
pp. 18-28
Author(s):  
He-Xiang Wu ◽  
Xin-Chun Zhang ◽  
Ying Liu

In contrast to the dynamic response characteristics, few propagation characteristics of elastic waves have been described on cellular materials, to date. In view of the development trend of emerging metamaterials on multi-functional, detailed characterization of elastic wave in honeycombs becomes an important task in order to assess their performances. This study investigates the propagation characteristics of elastic wave in square-packed circular honeycombs through combining theoretical analysis and numerical simulation. We also establish a one-dimensional circular chain model to discuss the influence mechanism of impact velocities, material parameters, and structural parameters on the elastic wave propagation characteristics in square-packed circular honeycombs. The influence relations are quantified and a semi-empirical theoretical expression for assessing characterization is presented, which extends theory of elastic wave propagation speed from solid materials to square-packed circular honeycombs. The assessment equation fully describes the elastic wave propagation speed and stress amplitude variation with location during propagation in square-packed circular honeycombs, and the results are consistent with the experimental data from the literature. The findings herein are aimed at providing an assessment equation with simple form for engineering applications easily and providing theoretical basis for elastic wave control and multi-functional combination design of metamaterials.


2018 ◽  
Vol 140 (6) ◽  
Author(s):  
M. Liu ◽  
W. D. Zhu

Different from elastic waves in linear periodic structures, those in phononic crystals (PCs) with nonlinear properties can exhibit more interesting phenomena. Linear dispersion relations cannot accurately predict band-gap variations under finite-amplitude wave motions; creating nonlinear PCs remains challenging and few examples have been studied. Recent studies in the literature mainly focus on discrete chain-like systems; most studies only consider weakly nonlinear regimes and cannot accurately obtain some relations between wave propagation characteristics and general nonlinearities. This paper presents propagation characteristics of longitudinal elastic waves in a thin rod and coupled longitudinal and transverse waves in an Euler–Bernoulli beam using their exact Green–Lagrange strain relations. We derive band structure relations for a periodic rod and beam and predict their nonlinear wave propagation characteristics using the B-spline wavelet on the interval (BSWI) finite element method. Influences of nonlinearities on wave propagation characteristics are discussed. Numerical examples show that the proposed method is more effective for nonlinear static and band structure problems than the traditional finite element method and illustrate that nonlinearities can cause band-gap width and location changes, which is similar to results reported in the literature for discrete systems. The proposed methodology is not restricted to weakly nonlinear systems and can be used to accurately predict wave propagation characteristics of nonlinear structures. This study can provide good support for engineering applications, such as sound and vibration control using tunable band gaps of nonlinear PCs.


Sign in / Sign up

Export Citation Format

Share Document