scholarly journals Strength Criterion of Asphalt Mixtures in Three-Dimensional Stress States under Freeze-Thaw Conditions

2018 ◽  
Vol 8 (8) ◽  
pp. 1302 ◽  
Author(s):  
Tuo Huang ◽  
Shuai Qi ◽  
Ming Yang ◽  
Songtao Lv ◽  
Hongfu Liu ◽  
...  
Keyword(s):  
Asphalt Mixture ◽  
Three Dimensional ◽  
Strength Criterion ◽  
Failure Criteria ◽  
Asphalt Mixtures ◽  
Triaxial Tests ◽  
Axial Strength ◽  
Freeze Thaw ◽  
Stone Mastic Asphalt ◽  
Stress States

In order to study the influence of freeze-thaw cycles on the multi-axial strength of AC (Asphalt Concrete)-13 and SMA (Stone Mastic Asphalt)-13 asphalt mixtures which are widely used in China, triaxial tests were carried out in the laboratory. Two nonlinear failure criterions under three-dimensional stress states in octahedral space were established. A linear model for engineering design and its simplified testing method were then presented. The three-dimensional failure criteria of asphalt mixtures after 0, 1, 3, 5, 10, 15, 20 freeze-thaw cycles were also proposed. The results indicated that the multi-axial strength decayed significantly after 20 freeze-thaw cycles. It is noteworthy that the strength degrades rapidly during the first 5 freeze-thaw cycles. Compared with AC-13 asphalt mixture, the SMA-13 asphalt mixture exhibits better performance on the resistance to freeze-thaw damage, and it is recommended as the upper surface layer material of pavement structure.

scholarly journals Characterization of Three-Dimensional Internal Structure Evolution in Asphalt Mixtures during Freeze–Thaw Cycles

2021 ◽  
Vol 11 (9) ◽  
pp. 4316
Author(s):  
Gang Xu ◽  
Xianhua Chen ◽  
Xing Cai ◽  
Yunhong Yu ◽  
Jun Yang
Keyword(s):  
Internal Structure ◽  
Asphalt Mixture ◽  
Three Dimensional ◽  
Asphalt Mixtures ◽  
Structure Evolution ◽  
Void Content ◽  
3D Images ◽  
X Ray ◽  
Freeze Thaw ◽  
Before And After

This paper aims to characterize the three-dimensional (3D) internal structure evolution of asphalt mixtures under freeze–thaw cycles. Asphalt mixtures with three levels of design void content (3%, 5%, and 7%) were prepared in the laboratory. Subsequently, X-ray computed tomography (CT) tests were conducted to capture two-dimensional (2D) images of the internal structure of samples before and after freeze–thaw testing. A set of image processing techniques for reconstructing 3D images of the internal structure were utilized to extract the internal structure properties, which were then used to analyze the changes in the air void distributions and to evaluate the internal structure evolution under freeze–thaw cycles. 3D images reconstructed from X-ray CT images illustrated a dramatic degradation in the internal structure after cyclic freeze–thaw exposure. The change in internal structure occurs mainly in three ways: (1) expansion of existing individual voids, (2) combination of two separated air voids, and (3) generation of new voids. In addition, the parametric analysis of the three-dimensional reconstructed voids revealed that the asphalt mixture void ratio increased with the number of freeze–thaw cycles, while the larger the initial void content, the more pronounced the increase in the specimens. Therefore, asphalt mixture freeze–thaw resistance should be optimized in relation to the design void content.

Effectiveness of Loaded Wheel Tracking Test to Ascertain Moisture Susceptibility of Asphalt Mixtures

2021 ◽  
pp. 036119812110363
Author(s):  
Moses Akentuna ◽  
Louay N. Mohammad ◽  
Sanchit Sachdeva ◽  
Samuel B. Cooper ◽  
Samuel B. Cooper
Keyword(s):  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Moisture Damage ◽  
Asphalt Mixtures ◽  
Asphalt Binders ◽  
Creep Recovery ◽  
Moisture Susceptibility ◽  
Freeze Thaw ◽  
Wheel Tracking ◽  
Mixture Samples

Moisture damage of asphalt mixtures is a major distress affecting the durability of asphalt pavements. The loaded wheel tracking (LWT) test is gaining popularity in determining moisture damage because of its ability to relate laboratory performance to field performance. However, the accuracy of LWT’s “pass/fail” criteria for screening mixtures is limited. The objective of this study was to evaluate the capability of the LWT test to identify moisture susceptibility of asphalt mixtures with different moisture conditioning protocols. Seven 12.5 mm asphalt mixtures with two asphalt binder types (unmodified PG 67-22 and modified PG 70-22), and three aggregate types (limestone, crushed gravel, and a semi-crushed gravel) were utilized. Asphalt binder and mixture samples were subjected to five conditioning levels, namely, a control; single freeze–thaw-; triple freeze–thaw-; MiST 3500 cycles; and MiST 7000 cycles. Frequency sweep at multiple temperatures and frequencies, and multiple stress creep recovery tests were performed to evaluate asphalt binders. LWT test was used to evaluate the asphalt mixture samples. Freeze–thaw and MiST conditioning resulted in an increase in stiffness in the asphalt binders as compared with the control. Further, freeze–thaw and MiST conditioning resulted in an increase in rut depth compared with the control asphalt mixture. The conditioning protocols evaluated were effective in exposing moisture-sensitive mixtures, which initially showed compliance with Louisiana asphalt mixture design specifications.

scholarly journals Study on Viscoelastic Properties of Asphalt Mixtures Incorporating SBS Polymer and Basalt Fiber under Freeze–Thaw Cycles

Polymers ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 1804
Author(s):  
Wensheng Wang ◽  
Guojin Tan ◽  
Chunyu Liang ◽  
Yong Wang ◽  
Yongchun Cheng
Keyword(s):  
Viscoelastic Properties ◽  
Asphalt Mixture ◽  
Basalt Fiber ◽  
Asphalt Mixtures ◽  
Freeze Thaw ◽  
Static Creep ◽  
Styrene Butadiene Styrene ◽  
Styrene Butadiene ◽  
Static Creep Test ◽  
Butadiene Styrene

This study aims to study the viscoelastic properties of asphalt mixtures incorporating styrene–butadiene–styrene (SBS) polymer and basalt fiber under freeze–thaw (F-T) cycles by using the static creep test. Asphalt mixture samples incorporating styrene–butadiene–styrene (SBS) polymer and basalt fiber were manufactured following the Superpave gyratory compaction (SGC) method and coring as well as sawing. After 0 to 21 F-T cycles processing, a uniaxial compression static creep test for the asphalt mixture specimens was performed to evaluate the influence of F-T cycles. The results indicated that the F-T cycles caused a larger creep deformation in the asphalt mixtures, which led to a decrease in the rut resistance of the asphalt mixtures incorporating SBS polymer and basalt fiber. Besides, the resistance to deformation decreased significantly in the early stage of F-T cycles. On the other hand, the viscoelastic parameters were analyzed to discuss the variation of viscoelastic characteristics. The relaxation time increased with F-T cycles, which will not be conducive to internal stress dissipation. Compared with lignin fiber, basalt fiber can improve the resistance to high-temperature deformation and the low-temperature crack resistance of asphalt mixtures under F-T cycles.

Experiment Study of Water Stability of Fiber-Reinforced Asphalt Mixture

2011 ◽  
Vol 243-249 ◽  
pp. 710-716 ◽  
Author(s):  
Ying Chun Cai ◽  
Yuan Xun Zheng
Keyword(s):  
Asphalt Mixture ◽  
Basalt Fiber ◽  
Asphalt Mixtures ◽  
Water Stability ◽  
Fiber Reinforced ◽  
Freeze Thaw ◽  
Optimum Dosage ◽  
Splitting Strength ◽  
Splitting Test ◽  
Marshall Test

To study the influence of fiber on the water stability of asphalt mixtures, the optimum dosage of asphalt and fibers are studied by the method of Marshall test and rut test. The results demonstrate that the optimum dosage of asphalt and fibers are 4.63% and 0.30%, respectively. Then the improved effects of basalt fiber on water stability of asphalt mixtures are evaluated through immersed Marshall test and freeze-thaw splitting test according to related specifications. The results show that the freeze-thaw splitting strength and splitting strength without freeze-thaw of fiber-reinforced asphalt mixture are improved to some extent compared with control mixture. Splitting strength without freeze-thaw of basalt, polyester and xylogen fiber-reinforced asphalt mixture is increased by 36.4%, 15.4% and 6.2%, and freeze-thaw splitting strength is increased by 55.2%, 28.7% and 14.5%. It can be concluded that fiber can remarkably improved the water stability of asphalt mixtures, besides; the improvement effects of basalt fiber are superior to polyester fiber and xylogen fiber.

scholarly journals General invariant forms of the anisotropic failure criteria

1993 ◽  
Vol 15 (3) ◽  
pp. 41-48
Author(s):  
Tran Ich Thinh
Keyword(s):  
Composite Materials ◽  
Rotational Symmetry ◽  
Three Dimensional ◽  
Failure Criteria ◽  
Orthotropic Composite ◽  
Hill Criterion ◽  
Special Cases ◽  
Stress States ◽  
The Hill

The general invariant forms of failure criteria for anisotropic solids were studied and applied to orthotropic composite materials. when subjected to three-dimensional stress states with rotational symmetry. The Hill criterion and the Tsai and Wu criterion are special cases of these general forms.

scholarly journals An extended invariant approach to laminate failure of fibre-reinforced polymer structures

2022 ◽  
pp. 1-24
Author(s):  
G. Corrado ◽  
A. Arteiro ◽  
A.T. Marques ◽  
J. Reinoso ◽  
F. Daoud ◽  
...  
Keyword(s):  
Composite Laminates ◽  
Composite Structures ◽  
Failure Modes ◽  
Three Dimensional ◽  
Failure Criteria ◽  
Design Tool ◽  
Advanced Composite Materials ◽  
Failure Envelopes ◽  
Out Of Plane ◽  
Stress States

Abstract This paper presents the extension and validation of omni-failure envelopes for first-ply failure (FPF) and last-ply failure (LPF) analysis of advanced composite materials under general three-dimensional (3D) stress states. Phenomenological failure criteria based on invariant structural tensors are implemented to address failure events in multidirectional laminates using the “omni strain failure envelope” concept. This concept enables the generation of safe predictions of FPF and LPF of composite laminates, providing reliable and fast laminate failure indications that can be particularly useful as a design tool for conceptual and preliminary design of composite structures. The proposed extended omni strain failure envelopes allow not only identification of the controlling plies for FPF and LPF, but also of the controlling failure modes. FPF/LPF surfaces for general 3D stress states can be obtained using only the material properties extracted from the unidirectional (UD) material, and can predict membrane FPF or LPF of any laminate independently of lay-up, while considering the effect of out-of-plane stresses. The predictions of the LPF envelopes and surfaces are compared with experimental data on multidirectional laminates from the first and second World-Wide Failure Exercise (WWFE), showing a satisfactory agreement and validating the conservative character of omni-failure envelopes also in the presence of high levels of triaxiality.

scholarly journals Further Investigation on Damage Model of Eco-Friendly Basalt Fiber Modified Asphalt Mixture under Freeze-Thaw Cycles

2018 ◽  
Vol 9 (1) ◽  
pp. 60 ◽  
Author(s):  
Wensheng Wang ◽  
Yongchun Cheng ◽  
Guirong Ma ◽  
Guojin Tan ◽  
Xun Sun ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Asphalt Mixture ◽  
Basalt Fiber ◽  
Asphalt Mixtures ◽  
Splitting Tensile Strength ◽  
Stiffness Modulus ◽  
Freeze Thaw ◽  
Damage Characteristics ◽  
Indirect Tensile

The main distresses of asphalt pavements in seasonally frozen regions are due to the effects of water action, freeze-thaw cycles, and so on. Basalt fiber, as an eco-friendly mineral fiber with high mechanical performance, has been adopted to reinforce asphalt mixture in order to improve its mechanical properties. This study investigated the freeze-thaw damage characteristics of asphalt mixtures reinforced with eco-friendly basalt fiber by volume and mechanical properties—air voids, splitting tensile strength, and indirect tensile stiffness modulus tests. Test results indicated that asphalt mixtures reinforced with eco-friendly basalt fiber had better mechanical properties (i.e., splitting tensile strength and indirect tensile stiffness modulus) before and after freeze-thaw cycles. Furthermore, this study developed logistic damage models of asphalt mixtures in terms of the damage characteristics, and found that adding basalt fiber could significantly reduce the damage degree by about 25%, and slow down the damage grow rate by about 45% compared with control group without basalt fiber. Moreover, multi-variable grey models (GM) (1,N) were established for modelling the damage characteristics of asphalt mixtures under the effect of freeze-thaw cycles. GM (1,3) was proven as an effective prediction model to perform better in prediction accuracy compared to GM (1,2).

scholarly journals Fracture Damage Properties of SBS-Modified Asphalt Mixtures Reinforced with Basalt Fiber after Freeze-Thaw Cycles Using the Acoustic Emission Approach

2020 ◽  
Vol 10 (9) ◽  
pp. 3301 ◽  
Author(s):  
Chunyu Liang ◽  
Junchen Ma ◽  
Peilei Zhou ◽  
Guirong Ma ◽  
Xin Xu
Keyword(s):  
Acoustic Emission ◽  
High Temperature ◽  
Asphalt Mixture ◽  
Basalt Fiber ◽  
Load Level ◽  
Asphalt Mixtures ◽  
Fracture Characteristics ◽  
Freeze Thaw ◽  
Ae Signal ◽  
Fracture Damage

This paper focuses on the fracture damage characteristics of styrene-butadiene-styrene (SBS)-modified SMA-13 specimens with basalt fiber under various freeze-thaw (F-T) cycles. SBS-modified stone mastic asphalt (SMA)-13 specimens with basalt fiber were prepared, first, using the superpave gyratory compaction method. Then, asphalt mixture specimens processed with 0–21 F-T cycles were adopted for the high-temperature compression and low-temperature splitting tests. Meanwhile, the acoustic emission (AE) test was conducted to evaluate the fracture characteristics of the asphalt mixture during loading. The results showed that the AE parameters could effectively reflect the damage fracture characteristics of the asphalt mixture specimen during the high-temperature compression and low-temperature splitting processes. The fracture damage of the asphalt mixture specimens during compression or splitting are classified into three stages based on the variation of the AE signals, i.e., when the load level is below 0.1~0.2 during the first stage and the load level is 0.1–0.9 or 0.2–0.8 during the second stage. The AE signal amplitude and count show clear correlations with the compression and splitting load levels. Meanwhile, the AE signal clarifies the formation, development, and failure of internal damage for the asphalt mixture specimens during the compression and splitting processes. The intensity (value and density) of the AE signal parameters of asphalt mixture decreases with increasing F-T cycles. It is evident that the F-T cycle has a significant adverse effect on the mechanical strength of asphalt mixture, which makes asphalt mixtures more likely to cause early failure.

scholarly journals Effects of Aggregate Mesostructure on Permanent Deformation of Asphalt Mixture Using Three-Dimensional Discrete Element Modeling

Materials ◽  
2019 ◽  
Vol 12 (21) ◽  
pp. 3601 ◽  
Author(s):  
Deyu Zhang ◽  
Linhao Gu ◽  
Junqing Zhu
Keyword(s):  
Surface Texture ◽  
Deformation Behavior ◽  
Negative Impact ◽  
Permanent Deformation ◽  
Asphalt Mixture ◽  
Three Dimensional ◽  
Vertical Direction ◽  
Discrete Element ◽  
Asphalt Mixtures ◽  
Creep Tests

This paper investigated the effects of aggregate mesostructures on permanent deformation behavior of an asphalt mixture using the three-dimensional (3D) discrete element method (DEM). A 3D discrete element (DE) model of an asphalt mixture composed of coarse aggregates, asphalt mastic, and air voids was developed. Mesomechanical models representing the interactions among the components of asphalt mixture were assigned. Based on the mesomechanical modeling, the uniaxial static load creep tests were simulated using the prepared models, and effects of aggregate angularity, orientation, surface texture, and distribution on the permanent deformation behavior of the asphalt mixtures were analyzed. It was proven that good aggregate angularity had a positive effect on the permanent deformation performance of the asphalt mixtures, especially when approximate cubic aggregates were used. Aggregate packing was more stable when the aggregate orientations tended to be horizontal, which improved the permanent deformation performance of the asphalt mixture. The influence of orientations of 4.75 mm size aggregates on the permanent deformation behavior of the asphalt mixture was significant. Use of aggregates with good surface texture benefitted the permanent deformation performance of the asphalt mixture. Additionally, the non-uniform distribution of aggregates had a negative impact on the permanent deformation performance of the asphalt mixtures, especially when aggregates were distributed non-uniformly in the vertical direction.

Evaluation of Moisture Susceptibility for Asphalt Mixtures

2013 ◽  
Vol 361-363 ◽  
pp. 1563-1566
Author(s):  
Chuan Yi Zhuang ◽  
Ya Li Ye ◽  
Yan Zhou
Keyword(s):  
Mechanical Performance ◽  
Water Immersion ◽  
Asphalt Mixture ◽  
Temperature Stability ◽  
Asphalt Mixtures ◽  
Hot Water ◽  
High Temperature Stability ◽  
Air Voids ◽  
Freeze Thaw ◽  
Hot Water Immersion

Types of asphalt mixture with different gradations and air voids were designed. Tests on their indirect tensile strength, compressive strength and resilient modulus of compression under single axle compressing were taken to study the effects of two forms of water immersion (hot water immersion and freeze-thaw split test) on asphalt mixtures mechanical performance and high temperature stability. Test results point out that water immersion decreased asphalt mixtures performance seriously and the effect of freeze-thaw split tests on asphalt mixtures performance is far stronger than that of hot water immersion. Asphalt mixtures performance is related with its gradation and percent air voids. Asphalt mixtures with different gradation are different in their percent air voids, suitable gradation can form framework and filling action obviously, so to yield mixture with suitable percent air voids and good water stability.

Sign in / Sign up

Export Citation Format

Share Document