scholarly journals Fracture Damage Properties of SBS-Modified Asphalt Mixtures Reinforced with Basalt Fiber after Freeze-Thaw Cycles Using the Acoustic Emission Approach

2020 ◽  
Vol 10 (9) ◽  
pp. 3301 ◽  
Author(s):  
Chunyu Liang ◽  
Junchen Ma ◽  
Peilei Zhou ◽  
Guirong Ma ◽  
Xin Xu
Keyword(s):  
Acoustic Emission ◽  
High Temperature ◽  
Asphalt Mixture ◽  
Basalt Fiber ◽  
Load Level ◽  
Asphalt Mixtures ◽  
Fracture Characteristics ◽  
Freeze Thaw ◽  
Ae Signal ◽  
Fracture Damage

This paper focuses on the fracture damage characteristics of styrene-butadiene-styrene (SBS)-modified SMA-13 specimens with basalt fiber under various freeze-thaw (F-T) cycles. SBS-modified stone mastic asphalt (SMA)-13 specimens with basalt fiber were prepared, first, using the superpave gyratory compaction method. Then, asphalt mixture specimens processed with 0–21 F-T cycles were adopted for the high-temperature compression and low-temperature splitting tests. Meanwhile, the acoustic emission (AE) test was conducted to evaluate the fracture characteristics of the asphalt mixture during loading. The results showed that the AE parameters could effectively reflect the damage fracture characteristics of the asphalt mixture specimen during the high-temperature compression and low-temperature splitting processes. The fracture damage of the asphalt mixture specimens during compression or splitting are classified into three stages based on the variation of the AE signals, i.e., when the load level is below 0.1~0.2 during the first stage and the load level is 0.1–0.9 or 0.2–0.8 during the second stage. The AE signal amplitude and count show clear correlations with the compression and splitting load levels. Meanwhile, the AE signal clarifies the formation, development, and failure of internal damage for the asphalt mixture specimens during the compression and splitting processes. The intensity (value and density) of the AE signal parameters of asphalt mixture decreases with increasing F-T cycles. It is evident that the F-T cycle has a significant adverse effect on the mechanical strength of asphalt mixture, which makes asphalt mixtures more likely to cause early failure.

scholarly journals Study on Viscoelastic Properties of Asphalt Mixtures Incorporating SBS Polymer and Basalt Fiber under Freeze–Thaw Cycles

Polymers ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 1804
Author(s):  
Wensheng Wang ◽  
Guojin Tan ◽  
Chunyu Liang ◽  
Yong Wang ◽  
Yongchun Cheng
Keyword(s):  
Viscoelastic Properties ◽  
Asphalt Mixture ◽  
Basalt Fiber ◽  
Asphalt Mixtures ◽  
Freeze Thaw ◽  
Static Creep ◽  
Styrene Butadiene Styrene ◽  
Styrene Butadiene ◽  
Static Creep Test ◽  
Butadiene Styrene

This study aims to study the viscoelastic properties of asphalt mixtures incorporating styrene–butadiene–styrene (SBS) polymer and basalt fiber under freeze–thaw (F-T) cycles by using the static creep test. Asphalt mixture samples incorporating styrene–butadiene–styrene (SBS) polymer and basalt fiber were manufactured following the Superpave gyratory compaction (SGC) method and coring as well as sawing. After 0 to 21 F-T cycles processing, a uniaxial compression static creep test for the asphalt mixture specimens was performed to evaluate the influence of F-T cycles. The results indicated that the F-T cycles caused a larger creep deformation in the asphalt mixtures, which led to a decrease in the rut resistance of the asphalt mixtures incorporating SBS polymer and basalt fiber. Besides, the resistance to deformation decreased significantly in the early stage of F-T cycles. On the other hand, the viscoelastic parameters were analyzed to discuss the variation of viscoelastic characteristics. The relaxation time increased with F-T cycles, which will not be conducive to internal stress dissipation. Compared with lignin fiber, basalt fiber can improve the resistance to high-temperature deformation and the low-temperature crack resistance of asphalt mixtures under F-T cycles.

Experiment Study of Water Stability of Fiber-Reinforced Asphalt Mixture

2011 ◽  
Vol 243-249 ◽  
pp. 710-716 ◽  
Author(s):  
Ying Chun Cai ◽  
Yuan Xun Zheng
Keyword(s):  
Asphalt Mixture ◽  
Basalt Fiber ◽  
Asphalt Mixtures ◽  
Water Stability ◽  
Fiber Reinforced ◽  
Freeze Thaw ◽  
Optimum Dosage ◽  
Splitting Strength ◽  
Splitting Test ◽  
Marshall Test

To study the influence of fiber on the water stability of asphalt mixtures, the optimum dosage of asphalt and fibers are studied by the method of Marshall test and rut test. The results demonstrate that the optimum dosage of asphalt and fibers are 4.63% and 0.30%, respectively. Then the improved effects of basalt fiber on water stability of asphalt mixtures are evaluated through immersed Marshall test and freeze-thaw splitting test according to related specifications. The results show that the freeze-thaw splitting strength and splitting strength without freeze-thaw of fiber-reinforced asphalt mixture are improved to some extent compared with control mixture. Splitting strength without freeze-thaw of basalt, polyester and xylogen fiber-reinforced asphalt mixture is increased by 36.4%, 15.4% and 6.2%, and freeze-thaw splitting strength is increased by 55.2%, 28.7% and 14.5%. It can be concluded that fiber can remarkably improved the water stability of asphalt mixtures, besides; the improvement effects of basalt fiber are superior to polyester fiber and xylogen fiber.

scholarly journals Further Investigation on Damage Model of Eco-Friendly Basalt Fiber Modified Asphalt Mixture under Freeze-Thaw Cycles

2018 ◽  
Vol 9 (1) ◽  
pp. 60 ◽  
Author(s):  
Wensheng Wang ◽  
Yongchun Cheng ◽  
Guirong Ma ◽  
Guojin Tan ◽  
Xun Sun ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Asphalt Mixture ◽  
Basalt Fiber ◽  
Asphalt Mixtures ◽  
Splitting Tensile Strength ◽  
Stiffness Modulus ◽  
Freeze Thaw ◽  
Damage Characteristics ◽  
Indirect Tensile

The main distresses of asphalt pavements in seasonally frozen regions are due to the effects of water action, freeze-thaw cycles, and so on. Basalt fiber, as an eco-friendly mineral fiber with high mechanical performance, has been adopted to reinforce asphalt mixture in order to improve its mechanical properties. This study investigated the freeze-thaw damage characteristics of asphalt mixtures reinforced with eco-friendly basalt fiber by volume and mechanical properties—air voids, splitting tensile strength, and indirect tensile stiffness modulus tests. Test results indicated that asphalt mixtures reinforced with eco-friendly basalt fiber had better mechanical properties (i.e., splitting tensile strength and indirect tensile stiffness modulus) before and after freeze-thaw cycles. Furthermore, this study developed logistic damage models of asphalt mixtures in terms of the damage characteristics, and found that adding basalt fiber could significantly reduce the damage degree by about 25%, and slow down the damage grow rate by about 45% compared with control group without basalt fiber. Moreover, multi-variable grey models (GM) (1,N) were established for modelling the damage characteristics of asphalt mixtures under the effect of freeze-thaw cycles. GM (1,3) was proven as an effective prediction model to perform better in prediction accuracy compared to GM (1,2).

scholarly journals Damage Fracture Characterization of Asphalt Mixtures Considering Freeze–Thaw Cycling and Aging Effects Based on Acoustic Emission Monitoring

Materials ◽  
2021 ◽  
Vol 14 (20) ◽  
pp. 5930
Author(s):  
Liuxu Fu ◽  
Huanyun Zhou ◽  
Jing Yuan ◽  
Weiliang An ◽  
Xianhua Chen
Keyword(s):  
Acoustic Emission ◽  
Real Time ◽  
Early Stage ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Aging Effects ◽  
Cumulative Energy ◽  
Internal Damage ◽  
Freeze Thaw ◽  
Damage Characteristics

Freeze–thaw (F–T) cycling and aging effects are the main factors contributing to the deterioration of asphalt mixtures. The acoustic emission (AE) technique enables real-time detection regarding the evolution of internal damage in asphalt mixtures during the loading process. This study set out to investigate the effects of F–T cycling and aging on the damage characteristics of asphalt mixture under splitting loads. Firstly, the Marshall specimens were prepared and then exposed to various numbers of F–T cycles (one, three, five, and seven) and different durations of aging (short-term aging and long-term aging for 24, 72, 120 and 168 h), after which the specimens were loaded by means of indirect tensile (IDT) testing, and corresponding parameters were synchronously collected by the AE acquisition system during the fracture process. Finally, the energy, cumulative energy and peak frequency were selected to investigate the damage mechanisms of asphalt mixtures. The findings demonstrate that the AE parameters provided effective identification of the deterioration for all specimens in real-time, and that the F–T cycling and aging effects altered the damage characteristics of asphalt mixtures, causing early damage, exacerbating the formation of micro-cracks in the early stage, accelerating the expansion of macro-cracks and advancing the debonding between the asphalt and aggregates. The findings of this study provide further insight into the mechanism of F–T cycling and aging effects on the deterioration of asphalt mixture.

scholarly journals Comparative Study on the Damage Characteristics of Asphalt Mixtures Reinforced with an Eco-Friendly Basalt Fiber under Freeze-thaw Cycles

Materials ◽  
2018 ◽  
Vol 11 (12) ◽  
pp. 2488 ◽  
Author(s):  
Yongchun Cheng ◽  
Wensheng Wang ◽  
Yafeng Gong ◽  
Shurong Wang ◽  
Shuting Yang ◽  
...  
Keyword(s):  
Mechanical Performance ◽  
Design Method ◽  
Damage Model ◽  
Asphalt Mixture ◽  
Basalt Fiber ◽  
Asphalt Mixtures ◽  
Fiber Content ◽  
Freeze Thaw ◽  
Damage Characteristics ◽  
Positive Effects

The main distresses of asphalt pavements in seasonal frozen regions are due to the effects of water action, freeze-thaw cycles, traffic, and so on. Fibers are usually used to reinforce asphalt mixtures, in order to improve its mechanical properties. Basalt fiber is an eco-friendly mineral fiber with high mechanical performance, low water absorption, and an appropriate temperature range. This paper aims to address the freeze-thaw damage characteristics of asphalt mixtures (AC-13) reinforced with eco-friendly basalt fiber, with a length of 6 mm. Based on the Marshall design method and ordinary pavement performances, including rutting resistance, anti-cracking, and moisture stability, the optimum asphalt and basalt fiber contents were determined. Test results indicated that the pavement performances of asphalt mixture exhibited a trend of first increasing and then deceasing, with the basalt fiber content. Subsequently, asphalt mixtures with a basalt fiber content of 0.4% were prepared for further freeze-thaw tests. Through the comparative analysis of air voids, splitting strength, and indirect tensile stiffness modulus, it could be found that the performances of asphalt mixtures gradually declined with freeze-thaw cycles and basalt fiber had positive effects on the freeze-thaw resistance. This paper can be used as a reference for further investigation on the freeze-thaw damage model of asphalt mixtures with basalt fiber.

Laboratory Study of Pavement Performance of Basalt Fiber-Modified Asphalt Mixture

2011 ◽  
Vol 266 ◽  
pp. 175-179 ◽  
Author(s):  
Yuan Xun Zheng ◽  
Ying Chun Cai ◽  
Ya Min Zhang
Keyword(s):  
Asphalt Mixture ◽  
Basalt Fiber ◽  
Temperature Stability ◽  
Asphalt Mixtures ◽  
Polyester Fiber ◽  
Pavement Performance ◽  
High Temperature Stability ◽  
Modified Asphalt ◽  
And Control ◽  
Temperature Crack

In order to discuss the effect of the basalt fiber on reinforcing pavement performance of asphalt mixtures, the optimum dosage of asphalt and fibers were studied by the method of Marshall test and rut test firstly. Then pavement performances of basalt fiber-modified asphalt mixtures were investigated through tests of high temperature stability, water stability and low temperature crack resistance, and compared with that of polyester fiber, xylogen fiber and control mixture. The testing results showed that the pavement performance of fiber-modified asphalt mixture are improved and optimized comparing with control asphalt mixture, and the performance of basalt fiber-modified asphalt mixture with best composition were excelled than those of polyester fiber and xylogen fiber.

Effectiveness of Loaded Wheel Tracking Test to Ascertain Moisture Susceptibility of Asphalt Mixtures

2021 ◽  
pp. 036119812110363
Author(s):  
Moses Akentuna ◽  
Louay N. Mohammad ◽  
Sanchit Sachdeva ◽  
Samuel B. Cooper ◽  
Samuel B. Cooper
Keyword(s):  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Moisture Damage ◽  
Asphalt Mixtures ◽  
Asphalt Binders ◽  
Creep Recovery ◽  
Moisture Susceptibility ◽  
Freeze Thaw ◽  
Wheel Tracking ◽  
Mixture Samples

Moisture damage of asphalt mixtures is a major distress affecting the durability of asphalt pavements. The loaded wheel tracking (LWT) test is gaining popularity in determining moisture damage because of its ability to relate laboratory performance to field performance. However, the accuracy of LWT’s “pass/fail” criteria for screening mixtures is limited. The objective of this study was to evaluate the capability of the LWT test to identify moisture susceptibility of asphalt mixtures with different moisture conditioning protocols. Seven 12.5 mm asphalt mixtures with two asphalt binder types (unmodified PG 67-22 and modified PG 70-22), and three aggregate types (limestone, crushed gravel, and a semi-crushed gravel) were utilized. Asphalt binder and mixture samples were subjected to five conditioning levels, namely, a control; single freeze–thaw-; triple freeze–thaw-; MiST 3500 cycles; and MiST 7000 cycles. Frequency sweep at multiple temperatures and frequencies, and multiple stress creep recovery tests were performed to evaluate asphalt binders. LWT test was used to evaluate the asphalt mixture samples. Freeze–thaw and MiST conditioning resulted in an increase in stiffness in the asphalt binders as compared with the control. Further, freeze–thaw and MiST conditioning resulted in an increase in rut depth compared with the control asphalt mixture. The conditioning protocols evaluated were effective in exposing moisture-sensitive mixtures, which initially showed compliance with Louisiana asphalt mixture design specifications.

scholarly journals Evaluation of Low Temperature Cracking of Asphalt Mixture Modified with PPA Using Acoustic Emission Technique

2018 ◽  
Vol 7 (4.20) ◽  
pp. 541
Author(s):  
Mojtaba Kodadadi ◽  
Ali Khodaii
Keyword(s):  
Acoustic Emission ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Bending Test ◽  
Limestone Aggregate ◽  
Failure Energy ◽  
Low Temperature Cracking ◽  
Spss Software ◽  
Non Destructive ◽  
Good Agreement

In this study, the behavior of asphalt mixture was studied using non-destructive Acoustic Emission (AE) technique at low temperatures. For this purpose, two types of bitumen 60/70 and 85/100 with two types of limestone and Silica aggregate were used to construct asphalt mixtures. Polyphosphoric acid (PPA) was used to modify the bitumen in the dosage of 0, 0.5, 1.0 and 1.5% of bitumen weight. Semicircular bending test (SCB) under a steady increasing strain at a rate of 3mm/min was conducted at 0, -10-, and -20 °C. Two AE channels were used to record the Sinusoid output around the crack of SCB sample during crack growth. Analysis of the results obtained from this study using SPSS software indicates that there is a significant relationship between the failure energy of SCB samples and the number of impacts received from AEs. Furthermore, AE energy has a good agreement with the sample failure energy. According to the failure criterion, asphalt mixtures containing 85/100 bitumen modified by 1.0% of PPA and limestone aggregate exhibit more crack resistance among other compositions.  

Comparison of Test Methods for High-Temperature Performance of Asphalt Mixtures

2013 ◽  
Vol 361-363 ◽  
pp. 1629-1634 ◽  
Author(s):  
Guo Xiong Wu ◽  
Xiao Ke Zhang ◽  
Rui Lin Wang
Keyword(s):  
Elastic Modulus ◽  
High Temperature ◽  
Shear Test ◽  
Asphalt Mixture ◽  
Test Methods ◽  
Asphalt Mixtures ◽  
Penetration Test ◽  
Shear Elastic Modulus ◽  
Temperature Performance ◽  
Slant Shear

Through a comparative study of high-temperature asphalt mixture performance by three methods: the standard rutting test, uniaxial penetration test on cylindrical specimens, and slant shear test, this paper displays that the shear elastic modulus gained by both cylindrical uniaxial penetration test and slant shear test can reflect well the properties of shear deformation of asphalt mixture under high temperature. However, there are certain limitations in these test methods.

scholarly journals Experimental Study on the Performance Decay of Permeable Asphalt Mixture in Seasonally Frozen Regions under Freeze-Thaw Cycles

2020 ◽  
Vol 12 (7) ◽  
pp. 2966 ◽  
Author(s):  
Chao Chai ◽  
Yong-Chun Cheng ◽  
Yuwei Zhang ◽  
Yu Chen ◽  
Bing Zhu
Keyword(s):  
Acoustic Emission ◽  
Asphalt Mixture ◽  
Temperature Stability ◽  
High Temperature Stability ◽  
Air Voids ◽  
Particle Loss ◽  
Seasonal Freezing ◽  
Freeze Thaw ◽  
Splitting Test ◽  
Air Void

This paper focuses on the freeze-thaw cycles (F-T cycles) resistance of porous asphalt mixture (PAM) with different air voids in order to explore the gradation of the PAM suitable for seasonal freezing regions. Three sets of PAMs with 18%, 21%, and 25% air voids were designed. After 0–20 F-T cycles, the effects of F-T cycles on the performance degradation of three groups of PAMs were studied by performing a low-temperature splitting test with acoustic emission technology, a normal temperature splitting test, a compression test, a Cantabro particle loss test, and a dynamic creep test. The results show that the damage process of PAM caused by multiple F-T cycles could be more clearly defined by acoustic emission parameters. In addition, the larger the air void, the smaller its indirect tensile strength and compression strength, and the worse its particle loss resistance and high-temperature stability, which made the adverse effect of F-T cycles more significant. Therefore, the air void of PAM used in seasonal freezing regions is suggested to be less than 21%.

Sign in / Sign up

Export Citation Format

Share Document