scholarly journals Evaluation of Low-Temperature Cracking Performance of Asphalt Pavements Using Acoustic Emission: A Review

2018 ◽  
Vol 8 (2) ◽  
pp. 306 ◽  
Author(s):  
Behzad Behnia ◽  
William Buttlar ◽  
Henrique Reis
Keyword(s):  
Acoustic Emission ◽  
Low Temperature ◽  
Asphalt Pavements ◽  
Cracking Performance ◽  
Low Temperature Cracking

scholarly journals Methods and criteria for evaluation of asphalt mixture resistance to low temperature cracking

2017 ◽  
Vol 12 (2) ◽  
pp. 135-144 ◽  
Author(s):  
Judita Gražulytė ◽  
Audrius Vaitkus ◽  
Vitalijus Andrejevas ◽  
Gediminas Gribulis
Keyword(s):  
Acoustic Emission ◽  
Spectral Analysis ◽  
Thermal Stress ◽  
Low Temperature ◽  
Low Temperatures ◽  
Asphalt Mixture ◽  
Asphalt Pavements ◽  
Advantages And Disadvantages ◽  
Specimen Test ◽  
Low Temperature Cracking

In cold regions and areas where there is a huge difference between high and low temperatures asphalt pavements are subject to low temperature cracking. The appeared cracks form pavement discontinuities, through which water penetrates into pavement structure. It reduces the bearing capacity of the whole pavement structure, weakens adhesion between bitumen and aggregate, affects bonding between layers and increases the development of frost heaves. A sealing of cracks deals with these issues. However, additional inspections after each winter have to be carried out to identify both cracks that have newly appeared and cracks that need to be resealed. These activities significantly increase road maintenance cost. Selection of the appropriate asphalt mixture by its performance at low temperatures reduces or even prevents low temperature cracking of asphalt pavements. A number of methods such as the Indirect Tensile Test, the Bending Beam Rheometer Test, the Thermal Stress Restrained Specimen Test, Asphalt Thermal Cracking Analyser, the Single-Edge-Notched Beam Test, the Disc-Shaped Compact Tension Test, the Semi-Circular Bend Test, the Fenix Test, Asphalt Concrete Cracking Device and Spectral Analysis of Acoustic Emission are developed to evaluate asphalt mixture resistance to low temperature cracking. This paper presents an analysis of these tests, emphasizes their advantages and disadvantages and gives limiting criteria to evaluate asphalt mixture resistance to low temperature cracking. The test advantages and disadvantages are deciding factors in a test selection. Some tests such as the Thermal Stress Restrained Specimen Test and Spectral Analysis of acoustic emission can directly reveal the lowest temperature at which asphalt mixture can withstand induced thermal stresses.

scholarly journals Application of Acoustic Emissions Technique in Assessment of Cracking Performance of Asphalt Pavement Materials

2021 ◽  
Author(s):  
Behzad Behnia
Keyword(s):  
Low Temperature ◽  
Acoustic Emissions ◽  
Asphalt Binders ◽  
Asphalt Pavements ◽  
Oxidative Aging ◽  
Aged Asphalt ◽  
Asphalt Materials ◽  
Cracking Performance ◽  
Low Temperature Cracking ◽  
Viable Approach

This chapter focuses on various applications of acoustic emissions (AE) technique in evaluation of cracking in asphalt pavements including (1) assessment of low-temperature cracking of asphalt binders and mixtures and (2) quantitative characterization of rejuvenators’ efficiency in restoring aged asphalt pavements to their crack-resistant state. The AE-based embrittlement temperature results of 24 different asphalt materials consisting of eight different binders, each at three oxidative aging levels are presented. Results show that embrittlement temperatures correlated well with corresponding bending beam rheometer (BBR-based) critical cracking temperatures with R2 = 0.85. This chapter also presents application of AE for evaluation of rejuvenators’ efficiency on asphalt materials at various oxidative aging levels. The Geiger’s iterative source location method was employed to accurately determine embrittlement temperatures throughout the thickness of rejuvenator-treated asphalt samples. Results showed that the low temperature cracking properties of oxidative aged materials after 2 weeks of dwell time of rejuvenator have been recuperated. Moreover, it was observed that cracking characteristics of aged asphalt 6–8 weeks after applying rejuvenator far exceeded that of the virgin materials. The promising results suggest that the AE technique can be considered as a viable approach for the assessment of low temperature behavior of asphalt pavements.

Influence Analysis of Performance on Sasobit Warm Mix Asphalt with Salinity

2014 ◽  
Vol 490-491 ◽  
pp. 138-141
Author(s):  
Kun Wang ◽  
Jing Ya Chen ◽  
Xiang Qu
Keyword(s):  
Low Temperature ◽  
Environmental Benefits ◽  
Fatigue Performance ◽  
Test Results ◽  
Temperature Performance ◽  
Cracking Performance ◽  
Low Temperature Cracking ◽  
Short And Long Term ◽  
Analysis Of Performance

Sasobit warm mix drainage asphalt pavement has become increasingly popular due to its environmental benefits and comfortable using effect. However, test results show that its low-temperature and anti-fatigue performance have a certain degree of reduced. To improve the performance of asphalt four different doses (1%, 3%, 5% and 7%) of salt are added to the Sasobit asphalt. Laboratory tests were used to simulate short and long term aging asphalt in the process of construction and using pavement. A series of binder tests including bending beam rheometer (BBR), dynamic shear rheometer (DSR) and Brookfield viscosity tests were conducted. Results show an increase of rutting performance for warm mix binders with Sasobit while asphalt with salt has similar high temperature performance to original asphalt. Unlike Sasobit which has a decrease of cracking performance for asphalt at low-temperature, salinity can greatly improve the Low-temperature performance. And the low-temperature cracking performance and anti-fatigue performance presents a tendency of climbing up first and then declining with the increase of salinity. The figure of viscosity-temperature curve shows that the optimum of salinity is 5%.Further more, asphalt with Sasobit and salt can gain better performance and same mixing and compaction effect in lower 20°C than hot mix asphalt without it.

Behaviour of recycled asphalt pavements at low temperatures

1991 ◽  
Vol 18 (3) ◽  
pp. 428-435 ◽  
Author(s):  
M. Sargious ◽  
N. Mushule
Keyword(s):  
Finite Element ◽  
Low Temperature ◽  
Thermal Stresses ◽  
Asphalt Pavements ◽  
Recycled Asphalt ◽  
Expected Performance ◽  
Different Types ◽  
Low Temperature Cracking ◽  
Proper Comparison ◽  
Better Than

This paper summarizes the results of a study conducted to evaluate the behaviour of recycled asphalt pavements with respect to low-temperature cracking. For this purpose, a recycled mix consisting of 45.2% reclaimed materials and 54.8% virgin materials as well as a virgin control mix were used in the research program. In the design of both mixes, their initial properties were kept as close as possible to each other to allow for a proper comparison between recycled and virgin asphalt pavements. Using mix properties that were determined experimentally in the laboratory, thermal stresses resulted from drop in temperature and the expected cracking temperatures were determined for both mixes. An experimental analysis based on laboratory tests that consider the pavement properties only as well as a more complete theoretical analysis based on a finite element computer program known as FETAB were included in this study. The program incorporates subgrade parameters, as well as pavement properties and thickness. Using these variables as inputs to the program, the expected performance of recycled and virgin asphalt pavements of various thicknesses and resting on different types of subgrade, with respect to low-temperature cracking, was studied. The results of the study indicated that recycled asphalt pavements would perform better than virgin asphalt pavements of similar initial properties. Key words: asphalt, finite element, low-temperature cracking, reclaimed, recycled, thermal stresses.

Evaluation of Carbon Nanotubes Asphalt Modification Using the Superpave Criteria

2021 ◽  
Vol 902 ◽  
pp. 135-143
Author(s):  
Mohammad Ali Khasawneh ◽  
Khalid Ghuzlan ◽  
Nada Bani Melhem
Keyword(s):  
Carbon Nanotubes ◽  
Low Temperature ◽  
Rheological Properties ◽  
Asphalt Binder ◽  
Fatigue Cracking ◽  
Asphalt Binders ◽  
Asphalt Pavements ◽  
Low Temperature Cracking ◽  
Asphalt Modification ◽  
Rotational Viscosity

Rutting, fatigue cracking and low temperature cracking are the most important distresses in asphalt pavements as a result of changes in rheological properties of asphalt binder. Many types of modifiers were used to enhance asphalt behavior at both low and high temperatures. In this study, carbon nanotubes (CNT) were used as one of many nanomaterials that take a large attention in the latest research related to asphalt modification against different types of distresses. Effect of CNT on rheological properties of asphalt binder was investigated by testing unmodified and CNT modified asphalt binders using two of Superpave devices: Dynamic Shear Rheometer (DSR) and Bending Beam Rheometer (BBR). Penetration, softening point, flash point and rotational viscosity (RV) tests were carried out as well. CNT was added in 0.1%, 0.5% and 1% by weight of asphalt binder. It was found that adding CNT in 0.5% and 1% increase stiffness of asphalt and consequently asphalt pavement rutting resistance. On the other hand, this increase in stiffness affected pavement behavior adversely which is not desirable for fatigue and low temperature cracking. However, Superpave specifications were still satisfied and asphalt binder’s relaxation properties were improved upon CNT modification. It was eventually found that 0.5% of CNT is the optimum percentage for the best performance.

Sign in / Sign up

Export Citation Format

Share Document