scholarly journals Pore Size Distribution and Surface Multifractal Dimension by Multicycle Mercury Intrusion Porosimetry of GGBFS and Limestone Powder Blended Concrete

2021 ◽  
Vol 11 (11) ◽  
pp. 4851
Author(s):  
Yury Villagrán-Zaccardi ◽  
Natalia Alderete ◽  
Philip Van den Van den Heede ◽  
Nele De De Belie
Keyword(s):  
Environmental Impact ◽  
Portland Cement ◽  
Pore Structure ◽  
Size Distribution ◽  
Mercury Intrusion Porosimetry ◽  
Pore Wall ◽  
Contact Angles ◽  
Limestone Powder ◽  
Portland Cement Concrete ◽  
Mercury Intrusion

Eco-friendly concrete mixtures make efficient use of constituents with reduced environmental impact to secure durable structures. Ternary mixes containing Portland cement, ground granulated blast-furnace slag (GGBFS) and limestone powder (LP) have demonstrated a good balance between environmental impact, economic cost and technical performance. The pore structure of cement-based materials determines the transport of species; hence its description is a valuable tool for predicting their durability performance. In this paper, textural analysis of the pore structure of Portland cement concrete and GGBFS and limestone powder blended concrete is assessed by multicycle mercury intrusion porosimetry (MIP). Results from three intrusion-extrusion cycles were used for determining pore volume, size distribution and surface multifractal dimension. The hysteresis during the experiments is mainly explained by the combined effects of ink-bottle pores and different contact angles for the intrusion and retraction. The analysis of the surface multifractal dimension of the pore structure showed no significant effects of GGBFS and limestone powder on the pore wall texture of concrete samples. The outcome depicts the advantages of using multiple intrusion-extrusion cycles during MIP experiments, as well as the effect of 35 wt.% GGBFS, 25 wt.% GGBFS + 10 wt.% LP, and 25 wt.% of LP, on concrete pore structure.

scholarly journals Ink-bottle Effect and Pore Size Distribution of Cementitious Materials Identified by Pressurization–Depressurization Cycling Mercury Intrusion Porosimetry

Materials ◽  
2019 ◽  
Vol 12 (9) ◽  
pp. 1454 ◽  
Author(s):  
Yong Zhang ◽  
Bin Yang ◽  
Zhengxian Yang ◽  
Guang Ye
Keyword(s):  
Pore Structure ◽  
Pore Size Distribution ◽  
Pore Size ◽  
Size Distribution ◽  
Mercury Intrusion Porosimetry ◽  
Cementitious Materials ◽  
Limestone Powder ◽  
Accurate Estimation ◽  
Mercury Intrusion ◽  
Pore Size Distributions

Capturing the long-term performance of concrete must be underpinned by a detailed understanding of the pore structure. Mercury intrusion porosimetry (MIP) is a widely used technique for pore structure characterization. However, it has been proven inappropriate to measure the pore size distribution of cementitious materials due to the ink-bottle effect. MIP with cyclic pressurization–depressurization can overcome the ink-bottle effect and enables a distinction between large (ink-bottle) pores and small (throat) pores. In this paper, pressurization–depressurization cycling mercury intrusion porosimetry (PDC-MIP) is adopted to characterize the pore structure in a range of cementitious pastes cured from 28 to 370 days. The results indicate that PDC-MIP provides a more accurate estimation of the pore size distribution in cementitious pastes than the standard MIP. Bimodal pore size distributions can be obtained by performing PDC-MIP measurements on cementitious pastes, regardless of the age. Water–binder ratio, fly ash and limestone powder have considerable influences on the formation of capillary pores ranging from 0.01 to 0.5 µm.

scholarly journals Study on the Pore Structure Characteristics of Ferronickel-Slag-Mixed Ternary-Blended Cement

Materials ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 4863
Author(s):  
Won Jung Cho ◽  
Min Jae Kim ◽  
Ji Seok Kim
Keyword(s):  
Compressive Strength ◽  
Portland Cement ◽  
Pore Structure ◽  
Mercury Intrusion Porosimetry ◽  
Chloride Transport ◽  
Blended Cement ◽  
Cement Matrix ◽  
X Ray ◽  
Mercury Intrusion ◽  
Ferronickel Slag

Pore structure development in Portland cement, fly ash, or/and ferronickel slag (FNS) was investigated using mercury intrusion porosimetry and X-ray CT tomography. The progress of hydration was observed using X-ray diffraction (XRD) analysis and compressive strength while durability of concrete was monitored by chloride penetration resistance and chloride profiles. Mercury intrusion porosimetry (MIP) results suggested that the blended cement had a higher porosity while lower critical pore size. The major reason to this increased porosity was the formation of meso and micro pores compared to ordinary Portland cement (OPC). In terms of chloride transport, replaced cement, especially ternary-blended cement had higher resistance to chloride transport and exhibited slightly lower development of compressive strength. X-ray CT tomography shows that the influence of pore structure of ternary-blended cement on the ionic transport was strongly related to the pore connectivity of cement matrix.

Chloride Permeability Of Concrete Containing A Flyash And A Blastfurnace Slag

1988 ◽  
Vol 137 ◽  
Author(s):  
Mitsunori Kawamura ◽  
Kazuyuki Torii
Keyword(s):  
Portland Cement ◽  
Pore Size Distribution ◽  
Pore Size ◽  
Size Distribution ◽  
Mercury Intrusion Porosimetry ◽  
Chloride Permeability ◽  
Curing Conditions ◽  
Mercury Intrusion ◽  
Blastfurnace Slag ◽  
Low Humidity

AbstractThe effects of curing conditions on the chloride permeability of concrete with various replacements of Portland cement by a flyash and a blastfurnace slag was investigated. In order to relate the porosity and pore size distribution of concretes to their chloride permeability, mercury intrusion porosimetry measurements were also conducted. The results showed that exposure of concretes to a relatively low humidity at early ages increased their chloride permeability. It was also found that the chloride permeability of concrete increased proportionally with increasing volume of pores larger than 0.1 μm in diameter.

Pore Structure of Hydrated Portland Cement Measured by Nitrogen Sorption and Mercury Intrusion Porosimetry

1986 ◽  
Vol 85 ◽  
Author(s):  
Will Hansen ◽  
Jamal Almudaiheem
Keyword(s):  
Portland Cement ◽  
Pore Structure ◽  
Pore Diameter ◽  
Mercury Intrusion Porosimetry ◽  
Capillary Condensation ◽  
Cement Ratio ◽  
Water Cement Ratio ◽  
Mercury Intrusion ◽  
Nitrogen Sorption ◽  
Solvent Replacement

ABSTRACTThe pore structure (i.e. surface area, pore size distribution and pore volume) of well-hydrated portland cement pastes of water-cement ratios 0.4, 0.6, and 0.75 were investigated by the nitrogen sorption and mercury intrusion porosimetry (MIP) techniques. The effect of solvent replacement by methanol on the pore structure was studied as well. It was concluded that the solvent replacement drying procedure preserves the original pore structure of hydrated cement because the calculated and measured bulk densities of the different water-cement ratio systems investigated were in excellent agreement. Capillary condensation analysis was used to estimate the volume of capillary pores smaller than 4 nm in pore diameter for the 0.6 and 0.75 water-cement ratio pastes. The 0.4 water-cement ratio paste has pores smaller than can be determined from capillary condensation analysis. The volume of pores smaller than 4 nm was estimated from volume-thickness (V-t) analysis. For the three systems investigated, the volume of pores greater than 4 nm was obtained by MIP. For solvent-replaced pastes that showed capillary condensation according to V-t analysis, excellent agreement was obtained between the nitrogen sorption and MIP techniques in the pore diameter range of 4 nm to 30 nm.

The Influence of Moisture on the Expansion of Macro-Defect-Free Cements

1991 ◽  
Vol 245 ◽  
Author(s):  
H. Igarashi ◽  
T. Takahashi
Keyword(s):  
Image Analysis ◽  
Polyvinyl Alcohol ◽  
Portland Cement ◽  
Pore Structure ◽  
Calcium Hydroxide ◽  
Mercury Intrusion Porosimetry ◽  
Nitrogen Adsorption ◽  
Cement Pastes ◽  
Alcohol Acetate ◽  
Mercury Intrusion

ABSTRACTMDF(Macro-Defect-Free ) cement pastes, which consist of portland cement and polyvinyl alcohol/acetate, were prepared by varying the temperature during pressing and drying operations. We then examined the expansion of MDF cement pastes at various constant humidities. There was a large difference in expansion above 60%R.H. between samples prepared varying temperature at which samples were pressed. Samples pressed at 90 °C showed less expansion than samples pressed at 40 °C.The pore structure of MDF cement pastes before exposure to moisture was measured by nitrogen adsorption, mercury intrusion porosimetry and image analysis. The properties of a matrix containing polyvinyl alcohol/acetate and cemnt hydrates were also investigated by TEM, IR and XPS.There were not large differences in the result of IR and XPS measurement between the MDF cement pastes prepared at various temperatures. Calcium hydroxide crystal, lying perpendicular to cement particles, were often observed only in the MDF cement pastes pressed at 90 °C which occurs by water absorption, seems to be suppressed by calcium hydroxide crystal.

scholarly journals Pore structure of mortars containing limestone powder and natural pozzolan assessed through mercury intrusion porosimetry and dynamic vapour sorption

2018 ◽  
Vol 199 ◽  
pp. 02020
Author(s):  
Natalia Alderete ◽  
Yury Villagrán ◽  
Arn Mignon ◽  
Didier Snoeck ◽  
Nele De Belie
Keyword(s):  
Pore Structure ◽  
Pore Size ◽  
Mercury Intrusion Porosimetry ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Limestone Powder ◽  
Natural Pozzolan ◽  
Mercury Intrusion ◽  
Vapour Sorption ◽  
Wide Range

Pore structure characterization is a key aspect when studying the durability of cementitious materials. When supplementary cementitious materials (SCMs) are used changes in pore structure are expected, and the complexity of its analysis is increased. The purpose of this paper is to describe the pore structure variation of mortars with two types of SCMs: natural pozzolan from volcanic origin (NP), and limestone powder (LP). We tested mixes with cement replacements (in weight) of 20 % and 40% by NP, and 10 % and 20% by LP. To analyse the pore structure, two widely accepted and complementary techniques were applied: dynamic water vapour sorption (DVS) and mercury intrusion porosimetry (MIP). With the DVS data, the Barret-Joyner-Halenda (BJH) model was used for pore size distribution assessment. Calculations with the Dubinin-Radushkevich (DR) model were also made for the smallest pore size range. Tests were performed at 28 and 90 days. MIP and DVS allowed evaluating the effect of the studied SCMs on different pore size ranges. Both techniques provided comprehensive information over a wide range of pore sizes. The mix with 40 % of NP had the best evolution, showing a significant volume decrease in the mesopore range.

Effect of Curing Time on the Pore Structure of the Portland Cement Concrete

2010 ◽  
Vol 44-47 ◽  
pp. 2592-2596
Author(s):  
Wei Lun Wang ◽  
Peng Liu
Keyword(s):  
Compressive Strength ◽  
Portland Cement ◽  
Pore Structure ◽  
Mercury Intrusion Porosimetry ◽  
Curing Time ◽  
Hydration Products ◽  
Portland Cement Concrete ◽  
X Ray Diffraction ◽  
Cement Concrete ◽  
X Ray

In this paper, the influence of curing time on the compressive strength and pore structure of the Portland cement concrete was investigated. The phase composition and morphology of hydration products of Portland cement were analyzed with X-ray diffraction (XRD). In addition, the porosity and pore distribution of the concrete were also researched using mercury intrusion porosimetry (MIP), surface area and porosity analyzer (BET). The results show that the influence of curing time on the compressive strength and pore structure of the concrete is obvious. With curing time increasing, the compressive strength of the concrete increased and the porosity decreased. The corresponding fractal dimension of the pore and the microstructure were changed, as well. With time increasing, more hydration products were produced.

Alteration of the pore structure of spruce (Picea abies (L.) Karst.) and maple (Acer pseudoplatanus L.) due to thermal treatment as determined by helium pycnometry and mercury intrusion porosimetry

Holzforschung ◽  
2009 ◽  
Vol 63 (1) ◽  
Author(s):  
Alexander Pfriem ◽  
Mario Zauer ◽  
André Wagenführ
Keyword(s):  
Thermal Treatment ◽  
Pore Structure ◽  
Pore Size Distribution ◽  
Pore Size ◽  
Size Distribution ◽  
Mercury Intrusion Porosimetry ◽  
Acer Pseudoplatanus ◽  
Thermal Treatments ◽  
Mercury Intrusion ◽  
Helium Pycnometry

Abstract The pore size distribution in wood affects sorption and transport of moisture. In the present paper, the pore structure of spruce and maple was examined in untreated and thermally modified samples. The relative humidities of the specimens were 33%, 43%, 53%, and 76%. Tests were carried out by helium pycnometry and mercury intrusion porosimetry. The results clearly show that thermal treatments change the apparent density, pore structure, and pore size distribution. Measurements by the mercury intrusion porosimetry indicated that the influence of various environmental conditions (humidity, temperature) on the porosity and pore size distribution is small.

scholarly journals Influence of mineral additions on the microstructure of concrete in chloride environment

2018 ◽  
Vol 1 (1) ◽  
pp. 283-292
Author(s):  
Walid Fouad Edris ◽  
Safwat Abdelkader ◽  
Encarnacion Reyes Pozo ◽  
Amparo Moragues Terrades
Keyword(s):  
Portland Cement ◽  
Blast Furnace Slag ◽  
Mercury Intrusion Porosimetry ◽  
Gas Permeability ◽  
Chloride Diffusion ◽  
Mercury Intrusion ◽  
Experimental Campaign ◽  
Mineral Additions ◽  
Chloride Environment ◽  
Furnace Slag

In this work we have designed an experimental campaign with four different dosages of concrete to study the influence of the principal additions used in marine environments. The effect of material composition [Sulfate Resistant Portland Cement (SRPC), Blast Furnace Slag Portland Cement (BFSPC), Silica Fume (SF) and Fly Ash (FA) with four different mix designs] was performed by means of differential thermal analysis (DTA), mercury intrusion porosimetry (MIP), gas permeability, chloride diffusion and mechanical properties of concrete. In order to simulate the aggressiveness of the marine environment the concretes were immersed in a sodium chloride solution with a concentration of 1 molar during different times of 182, 365 and 546 days. According to the results obtained, the SRPC and SRPC+FA samples suffered the highest rise in permeability, porosity and chloride diffusion, and the greatest loss in compressive strength

Sign in / Sign up

Export Citation Format

Share Document