scholarly journals Design and Numerical Simulation-Based Optimization of a Novel Flat-Face Coupling System for Hydraulic Power Equipment

2021 ◽  
Vol 11 (1) ◽  
pp. 388
Author(s):  
Yu-Ting Wu ◽  
Zhen Qin ◽  
Amre Eizad ◽  
Sung-Ki Lyu
Keyword(s):  
Power Transmission ◽  
Fluid Pressure ◽  
Vital Role ◽  
The Novel ◽  
Hydraulic Power ◽  
Working Pressure ◽  
Operational Mechanism ◽  
Transmission Equipment ◽  
Coupling System ◽  
Hydraulic Equipment

Coupling systems play a vital role in hydraulic power transmission equipment. In recent years, flat-face coupling systems have been extensively studied due to their environment friendly features. The difficulty of the connection process of hydraulic equipment increases with the increase in their working pressure. To improve the convenience of making high-pressure connections, a novel flat-face coupling system is proposed in this article. In the proposed design, which is based on the conventional flat-face coupling system, the resistance caused by high hydraulic fluid pressure during coupling is drastically reduced by the addition of an instantaneous pressure relief module. In this study, the theoretical model of the system kinetics is established to illustrate the operational mechanism of the novel design, and a series of computational fluid dynamics numerical investigations based on the novel dynamic mesh technology and Ansys Mosaic meshing technology are implemented to verify the rationality of the proposed design. Additionally, an optimal design of the novel flat-face coupling system is proposed to reduce the energy loss during hydraulic power transmission.

Dynamic Response of the Pipe Conveying Fluid with the Pressure Pulsation

2015 ◽  
Vol 1094 ◽  
pp. 491-494 ◽  
Author(s):  
Hong Bo Zhai ◽  
Jian Jun Su ◽  
Xiao Min Yan ◽  
Wei Liu
Keyword(s):  
Dynamic Response ◽  
Pressure Pulsation ◽  
Fluid Pressure ◽  
Response Characteristic ◽  
Pipe Conveying Fluid ◽  
Hydraulic Power ◽  
Working Pressure ◽  
Pipe System ◽  
Output Pressure ◽  
Conveying Fluid

The dynamic response characteristic of the pipe conveying fluid was researched with the fluid pressure pulsation in this article. For some hydraulic power pipe system, formed the mathematic models and the transfer matrices of the main hydraulic elements based on the fluid network algorithm, deduced the calculation formulae of input-output pressure pulsation, gained the transitive relationship of the fluid flow pulsation and pressure pulsation, and then studied the pressure pulsation amplitude of the hydraulic power pipes with different working pressures. This study, which analyzed the dynamic response of the pipe conveying fluid and discussed the feasibility of increasing the working pressure, is valuable for the design and the application of the pipes conveying fluid.

scholarly journals A Mathematical Model of Contact Tracing during the 2014–2016 West African Ebola Outbreak

Mathematics ◽  
2021 ◽  
Vol 9 (6) ◽  
pp. 608
Author(s):  
Danielle Burton ◽  
Suzanne Lenhart ◽  
Christina J. Edholm ◽  
Benjamin Levy ◽  
Michael L. Washington ◽  
...  
Keyword(s):  
Mathematical Model ◽  
Disease Management ◽  
Ebola Virus ◽  
Virus Disease ◽  
Infected Individual ◽  
Vital Role ◽  
West African ◽  
Contact Tracing ◽  
The Novel ◽  
Using Data

The 2014–2016 West African outbreak of Ebola Virus Disease (EVD) was the largest and most deadly to date. Contact tracing, following up those who may have been infected through contact with an infected individual to prevent secondary spread, plays a vital role in controlling such outbreaks. Our aim in this work was to mechanistically represent the contact tracing process to illustrate potential areas of improvement in managing contact tracing efforts. We also explored the role contact tracing played in eventually ending the outbreak. We present a system of ordinary differential equations to model contact tracing in Sierra Leonne during the outbreak. Using data on cumulative cases and deaths, we estimate most of the parameters in our model. We include the novel features of counting the total number of people being traced and tying this directly to the number of tracers doing this work. Our work highlights the importance of incorporating changing behavior into one’s model as needed when indicated by the data and reported trends. Our results show that a larger contact tracing program would have reduced the death toll of the outbreak. Counting the total number of people being traced and including changes in behavior in our model led to better understanding of disease management.

scholarly journals The Performance of a Mechanical Design ‘Compiler’

1993 ◽  
Vol 115 (3) ◽  
pp. 341-345 ◽  
Author(s):  
A. C. Ward ◽  
W. P. Seering
Keyword(s):  
Utility Function ◽  
Power Transmission ◽  
Mechanical Design ◽  
Temperature Sensing ◽  
Hydraulic Power ◽  
Optimal Implementation

A mechanical design “compiler” has been developed which, given an appropriate schematic, specifications, and utility function for a mechanical design, returns catalog numbers for an optimal implementation. The compiler has been successfully tested on a variety of mechanical and hydraulic power transmission designs, and a few temperature sensing designs. Times required have been at worst proportional to the logarithm of the number of possible combinations of catalog numbers.

Solving Decommissioning and Abandonment Problems When Planning to Shear 9 5/8-inch Casing in a 13 5/8-inch × 10k RAM BOP

2021 ◽  
Author(s):  
David Earl Cain ◽  
Keith Albert Klopfenstein ◽  
James Robert McMullan
Keyword(s):  
Calculation Method ◽  
Shear Force ◽  
Statistical Treatment ◽  
The Novel ◽  
Test Results ◽  
Calculation Methods ◽  
Working Pressure ◽  
Lower Shear ◽  
Validation Testing ◽  
Force Pressure

Abstract A decommissioning and abandonment requirement to shear 9 5/8-inch casing in certain circumstances with a 13 5/8-inch × 10,000 psi rated working pressure, RWP, Shear RAM type blowout preventer, BOP, resulted in a need to develop a novel casing shear device and shear calculation method. Results of shear testing, future engineering planning guidance, the new shear calculation method, and comparison to legacy technology are included in this paper. Interaction with the end user to understand requirements, a five-step problem solving procedure, a basis of design process, materials justification, verification analysis, validation testing, and describing an improved shear operator force/pressure calculation are all described. Shear larger casing in the required and restrictive RAM BOP and well bore presented a problematic challenge. Equally, tubular fish size was required to support fishing extraction operations following shear. Validation test results exceeded requirements and resulted in the need for a new approach to the shear calculation method. The novel shear RAM geometry was developed utilizing shear calculation methods which were based on legacy considerations. API 16A shear validation procedures and two legacy shear calculation methods where employed. Shear calculations are used to anticipate the RAM BOP operator pressures required to shear a specific tubular. The larger than historically allowed casing size to be sheared in a 13 5/8-inch × 10,000 psi RAM BOP meant higher operator pressures were anticipated for each operator option. A Novel shear RAM geometry was developed as a design intent to lower shear force/pressure. There was an observation during validation testing that the geometry exceeded expectations to lower shear pressure significantly. This observation led to a conclusion that an improved shear calculation method was required for this application. This novel calculation method description / statistical treatment, test results, RAM design methods, and tabular shear engineering planning information are included in this paper. One additional requirement of the shear RAM geometry was to provide an upper and lower fish deformed surface which could be easily retrieved thru the 13 5/8-inch BOP bore. An additional observation was that the fish width requirement was achieved. The novel shear calculation method allows an engineer to precisely plan for bonnet actuation pressures when larger casing is sheared. The precise calculation of shear force/pressure also assists with BOP operator size and type selection. The engineer will gain casing size versus shear pressure for specific operator options in tabular format. Planners will gain insight into tubular fish deformation estimation allowing mitigation of tubular extraction risk during operations planning.

scholarly journals A novel missense variant c.G644A (p.G215E) of the RPGR gene in a Chinese family causes X-linked retinitis pigmentosa

2019 ◽  
Vol 39 (10) ◽  
Author(s):  
Jiewen Fu ◽  
Jingliang Cheng ◽  
Qi Zhou ◽  
Chunli Wei ◽  
Hanchun Chen ◽  
...  
Keyword(s):  
Retinitis Pigmentosa ◽  
Expression Patterns ◽  
Missense Variant ◽  
Vital Role ◽  
Chinese Family ◽  
The Novel ◽  
Rna Seq ◽  
Targeted Next Generation Sequencing ◽  
Retinal Tissue ◽  
Eye Tissues

Abstract The mutations in patients with X-linked retinitis pigmentosa (xlRP) have not been well described in the Chinese population. In the present study, a five-generation Chinese retinitis pigmentosa (RP) family was recruited; targeted next-generation sequencing (TGS) was used to identify causative genes and Sanger sequencing for co-segregation. RNA-seq data analysis and revere transcriptional-polymerase chain reaction (RT-PCR) were applied to investigate gene expression patterns of RP GTPase regulator (RPGR) in human and Rpgr in mouse. A novel, hemizygous, deleterious and missense variant: c.G644A (p.G215E) in the RPGR gene (NM_000328.2) exon 7 of X-chromosome was identified in the proband, which was co-segregated with the clinical phenotypes in this family. RNA-seq data showed that RPGR is ubiquitously expressed in 27 human tissues with testis in highest, but no eye tissues data. Then the expressions for Rpgr mRNA in mice including eye tissues were conducted and showed that Rpgr transcript is ubiquitously expressed very highly in retina and testis, and highly in other eye tissues including lens, sclera, and cornea; and expressed highly in the six different developmental times of retinal tissue. Ubiquitous expression in different tissues from eye and very high expression in the retina indicated that RPGR plays a vital role in eye functions, particularly in retina. In conclusion, our study is the first to indicate that the novel missense variant c.G644A (p.G215E) in the RPGR gene might be the disease-causing mutation in this xlRP family, expanding mutation spectrum. These findings facilitate better understanding of the molecular pathogenesis of this disease; provide new insights for genetic counseling and healthcare.

A multi-unit serial inspection robot for power transmission lines

2019 ◽  
Vol 46 (2) ◽  
pp. 223-234 ◽  
Author(s):  
Guanghong Tao ◽  
Lijin Fang
Keyword(s):  
Transmission Line ◽  
Transmission Lines ◽  
Power Transmission ◽  
Power Transmission Line ◽  
The Novel ◽  
Power Transmission Lines ◽  
Obstacle Crossing ◽  
Content Type ◽  
Inspection Robot ◽  
Serial Robot

Purpose The purpose of this paper is to introduce a robot mechanism designed for power transmission line inspection. The focus for this design is on obstacle-crossing ability with a goal to create a robot moving and crossing obstacle on not only the straight line but also the steering line. Design/methodology/approach A novel four-unit tri-arm serial robot mechanism is proposed. Every novel unit designed for pitching motion is based on parallelogram structure, which is driven by cables and only one motor. There is gripper-wheel compounding mechanism mounted on the arm. The prototype and obstacle environments are established, and the obstacle-crossing experiments are conducted. Findings The novel unit mechanism and robot prototype have been tested in the lab. The prototype has demonstrated the obstacle-crossing ability when moving and crossing fundamental obstacles on the line. The experimental results show that the robot mechanism meets the obstacle-crossing requirements. Practical implications The novel robot technology can be used for defect inspection of power transmission line by power companies. Social implications It stands to lower the intense and risk of inspection works and reduce the costs related to inspection. Originality/value Innovative features include its architecture, mobility and driving method.

scholarly journals Multiplexed Supply of a MISO Wireless Power Transfer System for Battery-Free Wireless Sensors

Energies ◽  
2020 ◽  
Vol 13 (5) ◽  
pp. 1244
Author(s):  
Ghada Bouattour ◽  
Mohamed Elhawy ◽  
Slim Naifar ◽  
Christian Viehweger ◽  
Houda Ben Jmaa Derbel ◽  
...  
Keyword(s):  
Power Transmission ◽  
The Novel ◽  
Wireless Power ◽  
Single Output ◽  
Novel Approach ◽  
Single Coil ◽  
Communication Module ◽  
Wireless Power Transfer System ◽  
Receiving Coil ◽  
Secondary Side

Multi-input single output wireless power transmission (MISO-WPT) systems have decisive advantages concerning flexible receiver position in comparison to single coil systems. However, the supply of the primary side brings a large uncertainty in case of variable positions of the secondary side. In this paper, a compact multiplexed primary side electronic circuit is proposed, which includes only one signal generator, a passive peak detector, a communication module, and a compensation capacitor. The novel approach has been studied and evaluated for a MISO-WPT system having a 16 coils on primary side and one coil on secondary side having the double diameter. Results show that a standard microcontroller, in this case an STM32, is sufficient for the control of the whole system, so that the costs and the energy consumption are significantly reduced. An activation strategy has been proposed, which allows to determine the optimal transmitting coil for each position of the receiving coil and to switch it on. The time-to-start-charging at different positions of the receiving coil and different number of neighbors has been determined. It remains in all cases under 2.5 s.

Sign in / Sign up

Export Citation Format

Share Document