scholarly journals Time Series RUL Estimation of Medium Voltage Connectors to Ease Predictive Maintenance Plans

2020 ◽  
Vol 10 (24) ◽  
pp. 9041
Author(s):  
Álvaro Gómez-Pau ◽  
Jordi-Roger Riba ◽  
Manuel Moreno-Eguilaz
Keyword(s):  
Time Series ◽  
Electrical Resistance ◽  
Time Series Data ◽  
Critical Role ◽  
Remaining Useful Life ◽  
Predictive Maintenance ◽  
Series Data ◽  
Economic Losses ◽  
Medium Voltage ◽  
On Line

The ageing process of medium voltage power connectors can lead to important power system faults. An on-line prediction of the remaining useful life (RUL) is a convenient strategy to prevent such failures, thus easing the application of predictive maintenance plans. The electrical resistance of the connector is the most widely used health indicator for condition monitoring and RUL prediction, even though its measurement is a challenging task because of its low value, which typically falls in the range of a few micro-ohms. At the present time, the RUL of power connectors is not estimated, since their electrical parameters are not monitored because medium voltage connectors are considered cheap and secondary devices in power systems, despite they play a critical role, so their failure can lead to important power flow interruptions with the consequent safety risks and economic losses. Therefore, there is an imperious need to develop on-line RUL prediction strategies. This paper develops an on-line method to solve this issue, by predicting the RUL of medium voltage connectors based on the degradation trajectory of the electrical resistance, which is characterized by analyzing the electrical resistance time series data by means of the autoregressive integrated moving average (ARIMA) method. The approach proposed in this paper allows applying predictive maintenance plans, since the RUL enables determining when the power connector must be replaced by a new one. Experimental results obtained from several connectors illustrate the feasibility and accuracy of the proposed approach for an on-line RUL prediction of power connectors.

scholarly journals Remaining Useful Life Prediction Using Temporal Convolution with Attention

AI ◽  
2021 ◽  
Vol 2 (1) ◽  
pp. 48-70
Author(s):  
Wei Ming Tan ◽  
T. Hui Teo
Keyword(s):  
Neural Network ◽  
Time Series ◽  
Time Series Data ◽  
Remaining Useful Life ◽  
Sensor Data ◽  
Series Data ◽  
Multiple Time ◽  
Data Set ◽  
Form Complex ◽  
Useful Life

Prognostic techniques attempt to predict the Remaining Useful Life (RUL) of a subsystem or a component. Such techniques often use sensor data which are periodically measured and recorded into a time series data set. Such multivariate data sets form complex and non-linear inter-dependencies through recorded time steps and between sensors. Many current existing algorithms for prognostic purposes starts to explore Deep Neural Network (DNN) and its effectiveness in the field. Although Deep Learning (DL) techniques outperform the traditional prognostic algorithms, the networks are generally complex to deploy or train. This paper proposes a Multi-variable Time Series (MTS) focused approach to prognostics that implements a lightweight Convolutional Neural Network (CNN) with attention mechanism. The convolution filters work to extract the abstract temporal patterns from the multiple time series, while the attention mechanisms review the information across the time axis and select the relevant information. The results suggest that the proposed method not only produces a superior accuracy of RUL estimation but it also trains many folds faster than the reported works. The superiority of deploying the network is also demonstrated on a lightweight hardware platform by not just being much compact, but also more efficient for the resource restricted environment.

scholarly journals A Time-Series Data Generation Method to Predict Remaining Useful Life

Processes ◽  
2021 ◽  
Vol 9 (7) ◽  
pp. 1115
Author(s):  
Gilseung Ahn ◽  
Hyungseok Yun ◽  
Sun Hur ◽  
Si-Yeong Lim
Keyword(s):  
Time Series ◽  
Time Series Data ◽  
Remaining Useful Life ◽  
Series Data ◽  
Generation Model ◽  
Data Generation ◽  
Training Time ◽  
Symbolic Aggregate Approximation ◽  
Useful Life ◽  
Occurrence Patterns

Accurate predictions of remaining useful life (RUL) of equipment using machine learning (ML) or deep learning (DL) models that collect data until the equipment fails are crucial for maintenance scheduling. Because the data are unavailable until the equipment fails, collecting sufficient data to train a model without overfitting can be challenging. Here, we propose a method of generating time-series data for RUL models to resolve the problems posed by insufficient data. The proposed method converts every training time series into a sequence of alphabetical strings by symbolic aggregate approximation and identifies occurrence patterns in the converted sequences. The method then generates a new sequence and inversely transforms it to a new time series. Experiments with various RUL prediction datasets and ML/DL models verified that the proposed data-generation model can help avoid overfitting in RUL prediction model.

scholarly journals Adaptive Kernel Quantile Regression for Anomaly Detection

2009 ◽  
Vol 13 (3) ◽  
pp. 230-236
Author(s):  
Hiroyuki Moriguchi ◽  
◽  
Ichiro Takeuchi ◽  
Masayuki Karasuyama ◽  
Shin-ichi Horikawa ◽  
...  
Keyword(s):  
Time Series ◽  
Anomaly Detection ◽  
Quantile Regression ◽  
Time Series Data ◽  
Data Distribution ◽  
Optimal Solution ◽  
Series Data ◽  
Future Time ◽  
Adaptive Kernel ◽  
On Line

In this paper, we study a problem of anomaly detection from time series-data. We use kernel quantile regression (KQR) to predict the extreme (such as 0.01 or 0.99) quantiles of the future time-series data distribution. It enables us to tell whether the probability of observing a certain time-series sequence is larger than, say, 1 percent or not. In this paper, we develop an efficient update algorithm of KQR in order to adapt the KQR in on-line manner. We propose a new algorithm that allows us to compute the optimal solution of the KQR when a new training pattern is inserted or deleted. We demonstrate the effectiveness of our methodology through numerical experiment using real-world time-series data.

scholarly journals Remaining Useful Life Estimation from Event Data

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Mahbubul Alam ◽  
Laleh Jalali ◽  
Mahbubul Alam ◽  
Ahmed Farahat ◽  
Chetan Gupta
Keyword(s):  
Time Series ◽  
Deep Learning ◽  
Time Series Data ◽  
Remaining Useful Life ◽  
Sensor Data ◽  
Series Data ◽  
Sequential Data ◽  
Event Data ◽  
Useful Life ◽  
Event Based

Abstract—Prognostics aims to predict the degradation of equipment by estimating their remaining useful life (RUL) and/or the failure probability within a specific time horizon. The high demand of equipment prognostics in the industry have propelled researchers to develop robust and efficient prognostics techniques. Among data driven techniques for prognostics, machine learning and deep learning (DL) based techniques, particularly Recurrent Neural Networks (RNNs) have gained significant attention due to their ability of effectively representing the degradation progress by employing dynamic temporal behaviors. RNNs are well known for handling sequential data, especially continuous time series sequential data where the data follows certain pattern. Such data is usually obtained from sensors attached to the equipment. However, in many scenarios sensor data is not readily available and often very tedious to acquire. Conversely, event data is more common and can easily be obtained from the error logs saved by the equipment and transmitted to a backend for further processing. Nevertheless, performing prognostics using event data is substantially more difficult than that of the sensor data due to the unique nature of event data. Though event data is sequential, it differs from other seminal sequential data such as time series and natural language in the following manner, i) unlike time series data, events may appear at any time, i.e., the appearance of events lacks periodicity; ii) unlike natural languages, event data do not follow any specific linguistic rule. Additionally, there may be a significant variability in the event types appearing within the same sequence.  Therefore, this paper proposes an RUL estimation framework to effectively handle the intricate and novel event data. The proposed framework takes discrete events generated by an equipment (e.g., type, time, etc.) as input, and generates for each new event an estimate of the remaining operating cycles in the life of a given component. To evaluate the efficacy of our proposed method, we conduct extensive experiments using benchmark datasets such as the CMAPSS data after converting the time-series data in these datasets to sequential event data. The event data conversion is carried out by careful exploration and application of appropriate transformation techniques to the time series. To the best of our knowledge this is the first time such event-based RUL estimation problem is introduced to the community. Furthermore, we propose several deep learning and machine learning based solution for the event-based RUL estimation problem. Our results suggest that the deep learning models, 1D-CNN, LSTM, and multi-head attention show similar RMSE, MAE and Score performance. Foreseeably, the XGBoost model achieve lower performance compared to the deep learning models since the XGBoost model fails to capture ordering information from the sequence of events. 

Remaining Useful Life Estimation and Prognostication of SAC305 PCB's for Dynamic Conditions of Temperature and Vibration Loads

2021 ◽  
Author(s):  
Pradeep Lall ◽  
Tony Thomas ◽  
Ken Blecker
Keyword(s):  
Time Series ◽  
Deep Learning ◽  
Time Series Data ◽  
Short Term Memory ◽  
Multivariate Time Series ◽  
Remaining Useful Life ◽  
Series Data ◽  
Sac305 Solder ◽  
Feature Vectors ◽  
Useful Life

Abstract This study focuses on the feature vector identification and Remaining Useful Life (RUL) estimation of SAC305 solder alloy PCB's of two different configurations during varying conditions of temperature and vibration. The feature vectors are identified using the strain signals acquired from four symmetrical locations of the PCB at regular intervals during vibration. Two different types of experiments are employed to characterize the PCB's dynamic changes with varying temperature and acceleration levels. The strain signals acquired during each of these experiments are compared based on both time and frequency domain characteristics. Different statistical and frequency-based techniques were used to identify the strain signal variations with changes in the environment and loading conditions. The feature vectors in predicting failure at a constant working temperature and load were identified, and as an extension to this work, the effectiveness of the feature vectors during varying conditions of temperature and acceleration levels are investigated. The remaining Useful Life of the packages was estimated using a deep learning approach based on Long Short Term Memory (LSTM) network. This technique can identify the underlying patterns in multivariate time series data that can predict the packages' life. The autocorrelation function's residuals were used as the multivariate time series data in conjunction with the LSTM deep learning technique to forecast the packages' life at different varying temperatures and acceleration levels during vibration.

Sign in / Sign up

Export Citation Format

Share Document