scholarly journals Grasp Planning Pipeline for Robust Manipulation of 3D Deformable Objects with Industrial Robotic Hand + Arm Systems

2020 ◽  
Vol 10 (23) ◽  
pp. 8736
Author(s):  
Lazher Zaidi ◽  
Juan Antonio Corrales Ramon ◽  
Laurent Sabourin ◽  
Belhassen Chedli Bouzgarrou ◽  
Youcef Mezouar
Keyword(s):  
Contact Interaction ◽  
Contact Forces ◽  
Physical Contact ◽  
Initial Contact ◽  
Robotic Hand ◽  
Deformable Objects ◽  
Grasp Planning ◽  
Deformable Object ◽  
Precise Control ◽  
Contact Points

In the grasping and manipulation of 3D deformable objects by robotic hands, the physical contact constraints between the fingers and the object have to be considered in order to validate the robustness of the task. Nevertheless, previous works rarely establish contact interaction models based on these constraints that enable the precise control of forces and deformations during the grasping process. This paper considers all steps of the grasping process of deformable objects in order to implement a complete grasp planning pipeline by computing the initial contact points (pregrasp strategy), and later, the contact forces and local deformations of the contact regions while the fingers close over the grasped object (grasp strategy). The deformable object behavior is modeled using a nonlinear isotropic mass-spring system, which is able to produce potential deformation. By combining both models (the contact interaction and the object deformation) in a simulation process, a new grasp planning method is proposed in order to guarantee the stability of the 3D grasped deformable object. Experimental grasping experiments of several 3D deformable objects with a Barrett hand (3-fingered) and a 6-DOF industrial robotic arm are executed. Not only will the final stable grasp configuration of the hand + object system be obtained, but an arm + hand approaching strategy (pregrasp) will also be computed.

Calculation of Contact Forces of Large-Scale Heavy Forging Manipulator Grippers

2009 ◽  
Vol 419-420 ◽  
pp. 645-648 ◽  
Author(s):  
Qun Ming Li ◽  
Dan Gao ◽  
Hua Deng
Keyword(s):  
Large Scale ◽  
Optimization Method ◽  
Contact Forces ◽  
Robotic Hand ◽  
Closure Condition ◽  
Contact Points ◽  
Robot Hands ◽  
Calculation Results ◽  
Forging Manipulator ◽  
Gripping Force

Different from dexterous robotic hands, the gripper of heavy forging manipulator is an underconstrained mechanism whose tongs are free in a small wiggling range. However, for both a dexterous robotic hand and a heavy gripper, the force closure condition: the force and the torque equilibrium, must be satisfied without exception to maintain the grasping/gripping stability. This paper presents a gripping model for the heavy forging gripper with equivalent friction points, which is similar to a grasp model of multifingered robot hands including four contact points. A gripping force optimization method is proposed for the calculation of contact forces between gripper tongs and forged object. The comparison between the calculation results and the experimental results demonstrates the effectiveness of the proposed calculation method.

scholarly journals Optimal grasp planning for a dexterous robotic hand using the volume of a generalized force ellipsoid during accepted flattening

2017 ◽  
Vol 14 (1) ◽  
pp. 172988141668713 ◽  
Author(s):  
Peng Jia ◽  
Wei li Li ◽  
Gang Wang ◽  
Song Yu Li
Keyword(s):  
Simulation Analysis ◽  
Internal Force ◽  
Planning Method ◽  
Robotic Hand ◽  
Grasp Planning ◽  
Joint Torques ◽  
Contact Points ◽  
Generalized Force ◽  
Internal Forces ◽  
Dexterous Hand

A grasp planning method based on the volume and flattening of a generalized force ellipsoid is proposed to improve the grasping ability of a dexterous robotic hand. First, according to the general solution of joint torques for a dexterous robotic hand, a grasping indicator for the dexterous hand—the maximum volume of a generalized external force ellipsoid and the minimum volume of a generalized contact internal force ellipsoid during accepted flattening—is proposed. Second, an optimal grasp planning method based on a task is established using the grasping indicator as an objective function. Finally, a simulation analysis and grasping experiment are performed. Results show that when the grasping experiment is conducted with the grasping configuration and positions of contact points optimized using the proposed grasping indicator, the root-mean-square values of the joint torques and contact internal forces of the dexterous hand are at a minimum. The effectiveness of the proposed grasping planning method is thus demonstrated.

scholarly journals Slipping–rolling transitions of a body with two contact points

2021 ◽  
Author(s):  
Mate Antali ◽  
Gabor Stepan
Keyword(s):  
Rigid Body ◽  
Contact Point ◽  
Static Friction ◽  
Rigid Body Dynamics ◽  
Contact Forces ◽  
Friction Forces ◽  
Contact Points ◽  
Body Dynamics ◽  
Coulomb Model ◽  
Rigid Surfaces

AbstractIn this paper, the general kinematics and dynamics of a rigid body is analysed, which is in contact with two rigid surfaces in the presence of dry friction. Due to the rolling or slipping state at each contact point, four kinematic scenarios occur. In the two-point rolling case, the contact forces are undetermined; consequently, the condition of the static friction forces cannot be checked from the Coulomb model to decide whether two-point rolling is possible. However, this issue can be resolved within the scope of rigid body dynamics by analysing the nonsmooth vector field of the system at the possible transitions between slipping and rolling. Based on the concept of limit directions of codimension-2 discontinuities, a method is presented to determine the conditions when the two-point rolling is realizable without slipping.

Periodic Response of a Link Coupling With Clearance

1989 ◽  
Vol 111 (2) ◽  
pp. 253-259 ◽  
Author(s):  
Y. S. Choi ◽  
S. T. Noah
Keyword(s):  
Steady State ◽  
Boundary Conditions ◽  
Solution Procedure ◽  
Contact Forces ◽  
Steady State Response ◽  
Algebraic Equations ◽  
State Response ◽  
Contact Points ◽  
Integration Schemes ◽  
Nonlinear Algebraic Equations

The nonlinear, steady-state response of a displacement-forced link coupling with clearance with finite stiffness is determined. The solution procedure is derived from satisfying the boundary conditions at the contact points and then solving the resulting nonlinear algebraic equations by setting the duration of contact as a parameter. This direct approach to determining periodic solutions for systems with clearances with finite stiffness is substantially more efficient than numerical integration schemes. Results in terms of contact forces and durations of contact are pertinent to fatigue and wear studies. Parametric relations are presented for effects of the variation of damping, stiffness, exciting displacement, and gap length on the dynamic behavior of the link pair.

Spatial Kinematic Analysis of Threaded Fastener Assembly

2005 ◽  
Vol 128 (1) ◽  
pp. 116-127 ◽  
Author(s):  
Stephen Wiedmann ◽  
Bob Sturges
Keyword(s):  
Design Space ◽  
Compliant Mechanisms ◽  
Contact Point ◽  
Three Dimensional ◽  
Vertical Movement ◽  
Initial Contact ◽  
Geometric Problem ◽  
Intelligent Sensor ◽  
Contact State ◽  
Contact Points

Compliant mechanisms for rigid part mating exist for prismatic geometries. A few instances are known of mechanisms to assemble screw threads. A comprehensive solution to this essentially geometric problem comprises at least three parts: parametric equations for nut and bolt contact in the critical starting phase of assembly, the possible space of motions between these parts during this phase, and the design space of compliant devices which accomplish the desired motions in the presence of friction and positional uncertainty. This work concentrates on the second part in which the threaded pair is modeled numerically, and contact tests are automated through software. Tessellated solid models were used during three-dimensional collision analysis to enumerate the approximate location of the initial contact point. The advent of a second contact point presented a more constrained contact state. Thus, the bolt is rotated about a vector defined by the initial two contact points until a third contact location was found. By analyzing the depth of intersection of the bolt into the nut as well as the vertical movement of the origin of the bolt reference frame, we determined that there are three types of contacts states present: unstable two-point, quasi-stable two-point, stable three point. The space of possible motions is bounded by these end conditions which will differ in detail depending upon the starting orientations. We investigated all potential orientations which obtain from a discretization of the roll, pitch, and yaw uncertainties, each of which has its own set of contact points. From this exhaustive examination, a full contact state history was determined, which lays the foundation for the design space of either compliant mechanisms or intelligent sensor-rich controls.

Estimation of Graphite Dust Production in a Pebble-Bed Type Nuclear Reflector

2014 ◽  
Author(s):  
Ji-Ho Kang ◽  
Eung Seon Kim ◽  
Seungyon Cho
Keyword(s):  
Adhesive Wear ◽  
Cell Model ◽  
Estimation Method ◽  
Unit Cell ◽  
Contact Forces ◽  
Dust Explosion ◽  
Dust Production ◽  
Pebble Bed ◽  
Normal Contact ◽  
Contact Points

In this study, an estimation method of graphite dust production in the pebble-bed type reflector region of Korean HCSB (Helium-Cooled Solid Breeder) TBM (Test Blanket Module) in the ITER (International Thermonuclear Experimental Reactor) project using FEM (Finite Element Method) was proposed and the amount of dust production was calculated. A unit-cell model of uniformly arranged pebbles was defined with appropriate thermal and mechanical loadings. A commercial FEM program, Abaqus V6.10 was used to model and solve the stress field under multiple contact constraints between pebbles in the unit-cell. Resulting normal contact forces and slip distances on contact points were applied into the Archard adhesive wear equation to calculate the amount of graphite dust. The friction effect on contact points was investigated. The calculation result showed that the amount of graphite dust production was estimated to 2.22∼3.67e−4 g/m3 which was almost linearly proportional to the friction coefficient. The analysis results will be used as the basis data for the consecutive study of dust explosion.

Visual Grasp Planning for Unknown Objects Using a Multifingered Robotic Hand

2013 ◽  
Vol 18 (3) ◽  
pp. 1050-1059 ◽  
Author(s):  
Vincenzo Lippiello ◽  
Fabio Ruggiero ◽  
Bruno Siciliano ◽  
Luigi Villani
Keyword(s):  
Robotic Hand ◽  
Grasp Planning ◽  
Unknown Objects

scholarly journals Repeatability Analysis of Overconstrained Kinematic Coupling Using a Parallel-Mechanism-Equivalent Model

2020 ◽  
Author(s):  
Jianzhong Ding ◽  
Xueao Liu ◽  
chunjie wang
Keyword(s):  
Parallel Mechanism ◽  
Sampling Method ◽  
Contact Forces ◽  
Equivalent Model ◽  
Parallel Mechanisms ◽  
Kinematic Coupling ◽  
Contact Points ◽  
Prismatic Joints ◽  
Type Coupling ◽  
Additional Support

Abstract A novel method for repeatability analysis of overconstrained kinematic coupling using a parallel-mechanism-equivalent-model is proposed. An overconstrained Kelvin-type coupling with one additional support is introduced and used for method illustration. Contact forces of the overconstrained coupling under preload are computed with Moore-Penrose inverse and the deformations are obtained using the Hertz theory. The couping is equivalently modeled as a 7-SPS parallel mechanism, spherical joints of which represent the centers of the supporting balls and the contact points, respectively, and prismatic joints are used to simulate the deformations. Therefore, pose error of the coupling arisen from preload is analyzed using the well-appraised incremental method for forward kinematics analysis of parallel mechanisms. The uncertainties of the preload are discussed and a boundary-sampling method is proposed for repeatability analysis. The main contribution of this study lies in that the proposed parallel-mechanism-equivalent-model and the boundary-sampling method greatly simplify the repeatability analysis of overconstrained kinematic couplings. Finally, the proposed methods are validated by case study.

Modeling of a Finger-Follower Cam System With Verification in Contact Forces

1993 ◽  
Author(s):  
Wensyang Hsu ◽  
Albert P. Pisano
Keyword(s):  
Constraint Equation ◽  
Contact Forces ◽  
Valve Train ◽  
Dynamic Responses ◽  
Valve Lift ◽  
Distributed Parameter ◽  
Contact Points ◽  
Frictional Forces ◽  
Contact Position ◽  
Force Data

Abstract A lumped/distributed-parameter, dynamic model is developed to investigate the dynamic responses of a finger-follower valve train with the effects of an oscillating pivot, frictional forces between sliding surfaces, and a hydraulic lash adjuster. Based on the measured force data at low speed, an algorithm is derived to determine the dynamic Coulomb friction coefficients around maximum valve lift simultaneously at three contact points. A constraint equation is formulated to find the contact position between the cam and the follower kinematically. This makes it possible for the model to simulate the dynamic response of the cam system when the pivot is moving. A hydraulic lash adjuster acting as the pivot of the follower is also modeled with the effects of oil compressibility and oil refill mechanism. The model is numerically integrated and shown to have good agreement between simulation results and experimental data of contact forces at three different speeds. The maximum operating speed is limited by valve toss, loss contact between components. The model predicts toss between the hydraulic lash adjuster and the follower at 2535 rpm, and experiment indicates toss starting at 2520 rpm of camshaft speed.

Study of grasp-energy based optimal distribution of contact forces on a humanoid robotic hand during object grasp

Robotica ◽  
2021 ◽  
pp. 1-26
Author(s):  
Sourajit Mukherjee ◽  
Abhijit Mahapatra ◽  
Amit Kumar ◽  
Avik Chatterjee
Keyword(s):  
Optimization Algorithm ◽  
Degrees Of Freedom ◽  
Simulated Data ◽  
Performance Measure ◽  
Contact Forces ◽  
Contact Model ◽  
Robotic Hand ◽  
Net Energy ◽  
Optimal Distribution

Abstract A novel grasp optimization algorithm for minimizing the net energy utilized by a five-fingered humanoid robotic hand with twenty degrees of freedom for securing a precise grasp is presented in this study. The algorithm utilizes a compliant contact model with a nonlinear spring and damper system to compute the performance measure, called ‘Grasp Energy’. The measure, subject to constraints, has been minimized to obtain locally optimal cartesian trajectories for securing a grasp. A case study is taken to compare the analytical (applying the optimization algorithm) and the simulated data in MSC.Adams $^{^{\circledR}}$ , to prove the efficacy of the proposed formulation.

Sign in / Sign up

Export Citation Format

Share Document