scholarly journals Digitalization of the Ex-Core Neutron Flux Monitoring System for APR1400 Nuclear Power Plant

2020 ◽  
Vol 10 (23) ◽  
pp. 8331
Author(s):  
Young Baik Kim ◽  
Felipe P. Vista ◽  
Seung Bin Cho ◽  
Kil To Chong
Keyword(s):  
Neutron Flux ◽  
Monitoring System ◽  
Nuclear Power ◽  
Power Plants ◽  
Gamma Ray ◽  
Reactor Power ◽  
Power Calculation ◽  
Wide Range ◽  
Flux Monitoring ◽  
And Performance

This work studied the feasibility of digitalizing the analog Ex-Core Neutron Flux Monitoring System (ENFMS) being used for APR1400 nuclear power plants (NPPs) and as to which strategies and steps must be taken. A fission chamber neutron flux detection and instrumentation model were designed. Its accuracy was evaluated and proven by comparing the model data with data gathered from tests and plant operations. A conceptual design was proposed through a combined structure that digitalizes only part of the system. The detector signal pre-amplification remains in analog form while the other functions such as reactor power calculation as well as signal conditioning and processing will be digitalized. Simulations showed that the true mean squared voltage (MSV) of the digitalized ENFMS maintained a linear relationship between real and estimated reactor power in the wide range compared to averaged magnitude squared value of analog ENFMS. Extended Kalman Filter (EKF) was also utilized for estimating reactor power and reactor period from measurement signals that are contaminated with gamma ray interaction and electric noise. This study proved that the ENFMS can be successfully digitalized as proposed wherein all functional and performance requirements are satisfied. Simulations results demonstrated that the functions and performance can be improved through the use of digital processing algorithms such as EKF and MSV.

scholarly journals On Capabilities and Limitations of Current Fast Neutron Flux Monitoring Instrumentation for the Demo LFR ALFRED

2016 ◽  
Vol 2 (4) ◽  
Author(s):  
Luigi Lepore ◽  
Romolo Remetti ◽  
Mauro Cappelli
Keyword(s):  
Monte Carlo ◽  
Neutron Flux ◽  
Fast Reactor ◽  
Nuclear Power ◽  
Power Plants ◽  
Fuel Cycle ◽  
Signal To Noise Ratio ◽  
Reactor Power ◽  
Fast Reactors ◽  
Flux Monitoring

Among GEN IV projects for future nuclear power plants, lead-cooled fast reactors (LFRs) seem to be a very interesting solution due to their benefits in terms of fuel cycle, coolant safety, and waste management. The novelty of this matter causes some open issues about coolant chemical aspects, structural aspects, monitoring instrumentation, etc. Particularly, hard neutron flux spectra would make traditional neutron instrumentation unfit to all reactor conditions, i.e., source, intermediate, and power range. Identification of new models of nuclear instrumentation specialized for LFR neutron flux monitoring asks for an accurate evaluation of the environment the sensor will work in. In this study, thermal hydraulics and chemical conditions for the LFR core environment will be assumed, as the neutron flux will be studied extensively by the Monte Carlo transport code MCNPX (Monte Carlo N-Particles X-version). The core coolant’s high temperature drastically reduces the candidate instrumentation because only some kinds of fission chambers and self-powered neutron detectors can be operated in such an environment. This work aims at evaluating the capabilities of the available instrumentation (usually designed and tailored for sodium-cooled fast reactors) when exposed to the neutron spectrum derived from the Advanced Lead Fast Reactor European Demonstrator, a pool-type LFR project to demonstrate the feasibility of this technology into the European framework. This paper shows that such a class of instrumentation does follow the power evolution, but is not completely suitable to detect the whole range of reactor power, due to excessive burnup, damages, or gamma interferences. Some improvements are possible to increase the signal-to-noise ratio by optimizing each instrument in the range of reactor power, so to get the best solution. The design of some new detectors is proposed here together with a possible approach for prototyping and testing them by a fast reactor.

Development of a wide-range neutron flux monitoring system in EAST

2020 ◽  
Vol 15 (05) ◽  
pp. P05011-P05011
Author(s):  
G.Q. Zhong ◽  
K. Li ◽  
L.Q. Hu ◽  
H.R. Cao ◽  
R.J. Zhou ◽  
...  
Keyword(s):  
Neutron Flux ◽  
Monitoring System ◽  
Wide Range ◽  
Flux Monitoring

Design, calibration, and application of an airborne gamma spectrometer system in Switzerland

Geophysics ◽  
1997 ◽  
Vol 62 (5) ◽  
pp. 1369-1378 ◽  
Author(s):  
Georg F. Schwarz ◽  
Ladislaus Rybach ◽  
Emile E. Klingelé
Keyword(s):  
Power Plant ◽  
Nuclear Power ◽  
Power Plants ◽  
Gamma Ray ◽  
Point Sources ◽  
Swiss Alps ◽  
Artificial Radioactivity ◽  
Radiation Level ◽  
Satellite Navigation System ◽  
Emergency Situations

Airborne radiometric surveys are finding increasingly wider applications in environmental mapping and monitoring. They are the most efficient tool to delimit surface contamination and to locate lost radioactive sources. To secure radiometric capability in survey and emergency situations, a new sensitive airborne system has been built that includes an airborne spectrometer with 256 channels and a sodium iodide detector with a total volume of 16.8 liters. A rack mounted PC with memory cards is used for data acquisition, with a GPS satellite navigation system for positioning. The system was calibrated with point sources using a mathematical correction to take into account the effects of gamma‐ray scattering in the ground and in the atmosphere. The calibration was complemented by high precision ground gamma spectrometry and laboratory measurements on rock samples. In Switzerland, two major research programs make use of the capabilities of airborne radiometric measurements. The first one concerns nuclear power plant monitoring. The five Swiss nuclear installations (four power plants and one research facility) and the surrounding regions of each site are surveyed annually. The project goal is to monitor the dose‐rate distribution and to provide a documented baseline database. The measurements show that all sites (with the exception of the Gösgen power plant) can be identified clearly on the maps. No artificial radioactivity that could not be explained by the Chernobyl release or earlier nuclear weapons tests was detected outside of the fenced sites of the nuclear installations. The second program aims at a better evaluation of the natural radiation level in Switzerland. The survey focused on the crystalline rocks of the Central Massifs of the Swiss Alps because of their relatively high natural radioactivity and lithological variability.

Optimization design for mechanical seals in reactor coolant pumps based on a fluid–solid strong-interaction model

2011 ◽  
Vol 225 (8) ◽  
pp. 1851-1862 ◽  
Author(s):  
C-J Liao ◽  
W-F Huang ◽  
Y-M Wang ◽  
S-F Suo ◽  
X-F Liu
Keyword(s):  
Strong Interaction ◽  
Optimization Design ◽  
Power Plants ◽  
Interaction Model ◽  
Reactor Power ◽  
Mechanical Seals ◽  
Pressurized Water ◽  
Reactor Coolant ◽  
The Operating Mechanism ◽  
And Performance

The study on the mechanism and performance of the mechanical seals in reactor coolant pumps (RCPs) is very important for the safe operations of pressurized water reactor power plants. By exploring the operating mechanism of the first seal of the hydrostatic mechanical seal in RCPs, an analytical fluid–solid strong-interaction model of the seal is proposed in this article. The model holds that the mechanical deformations of the seal assembly are dominated by the deflections of the seal rings, and this idea is demonstrated by the numerical simulation result of a fluid–solid interaction (FSI) model. Using the analytical FSI model, the regularity that the leakage rate of the first seal varies with the differential pressure in a RCP is obtained, and compared with the operational data, which is used to verify the model. Based on the understanding of the reliability of the seal, a dimensionless parameter Λ that acts as an attribute to the reliability is proposed in this article. Using the analytical FSI model and Λ as the optimization algorithm and optimization object, respectively, the optimum designs about the seal faceplateconfigurations are performed. Also, the specific optimization conclusions are given simultaneously.

scholarly journals Importance of Advanced Planning of Manufacturing for Nuclear Industry

2016 ◽  
Vol 7 (2) ◽  
pp. 42-49
Author(s):  
Nick Shykinov ◽  
Robert Rulko ◽  
Dariusz Mroz
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Regulatory Compliance ◽  
Pressure Vessels ◽  
Nuclear Industry ◽  
Project Schedule ◽  
Nuclear Facilities ◽  
Project Completion ◽  
Advanced Planning ◽  
And Performance

Abstract In the context of energy demands by growing economies, climate changes, fossil fuel pricing volatility, and improved safety and performance of nuclear power plants, many countries express interest in expanding or acquiring nuclear power capacity. In the light of the increased interest in expanding nuclear power the supply chain for nuclear power projects has received more attention in recent years. The importance of the advanced planning of procurement and manufacturing of components of nuclear facilities is critical for these projects. Many of these components are often referred to as long-lead items. They may be equipment, products and systems that are identified to have a delivery time long enough to affect directly the overall timing of a project. In order to avoid negatively affecting the project schedule, these items may need to be sourced out or manufactured years before the beginning of the project. For nuclear facilities, long-lead items include physical components such as large pressure vessels, instrumentation and controls. They may also mean programs and management systems important to the safety of the facility. Authorized nuclear operator training, site evaluation programs, and procurement are some of the examples. The nuclear power industry must often meet very demanding construction and commissioning timelines, and proper advanced planning of the long-lead items helps manage risks to project completion time. For nuclear components there are regulatory and licensing considerations that need to be considered. A national nuclear regulator must be involved early to ensure the components will meet the national legal regulatory requirements. This paper will discuss timing considerations to address the regulatory compliance of nuclear long-lead items.

Sign in / Sign up

Export Citation Format

Share Document