scholarly journals On Capabilities and Limitations of Current Fast Neutron Flux Monitoring Instrumentation for the Demo LFR ALFRED

2016 ◽  
Vol 2 (4) ◽  
Author(s):  
Luigi Lepore ◽  
Romolo Remetti ◽  
Mauro Cappelli
Keyword(s):  
Monte Carlo ◽  
Neutron Flux ◽  
Fast Reactor ◽  
Nuclear Power ◽  
Power Plants ◽  
Fuel Cycle ◽  
Signal To Noise Ratio ◽  
Reactor Power ◽  
Fast Reactors ◽  
Flux Monitoring

Among GEN IV projects for future nuclear power plants, lead-cooled fast reactors (LFRs) seem to be a very interesting solution due to their benefits in terms of fuel cycle, coolant safety, and waste management. The novelty of this matter causes some open issues about coolant chemical aspects, structural aspects, monitoring instrumentation, etc. Particularly, hard neutron flux spectra would make traditional neutron instrumentation unfit to all reactor conditions, i.e., source, intermediate, and power range. Identification of new models of nuclear instrumentation specialized for LFR neutron flux monitoring asks for an accurate evaluation of the environment the sensor will work in. In this study, thermal hydraulics and chemical conditions for the LFR core environment will be assumed, as the neutron flux will be studied extensively by the Monte Carlo transport code MCNPX (Monte Carlo N-Particles X-version). The core coolant’s high temperature drastically reduces the candidate instrumentation because only some kinds of fission chambers and self-powered neutron detectors can be operated in such an environment. This work aims at evaluating the capabilities of the available instrumentation (usually designed and tailored for sodium-cooled fast reactors) when exposed to the neutron spectrum derived from the Advanced Lead Fast Reactor European Demonstrator, a pool-type LFR project to demonstrate the feasibility of this technology into the European framework. This paper shows that such a class of instrumentation does follow the power evolution, but is not completely suitable to detect the whole range of reactor power, due to excessive burnup, damages, or gamma interferences. Some improvements are possible to increase the signal-to-noise ratio by optimizing each instrument in the range of reactor power, so to get the best solution. The design of some new detectors is proposed here together with a possible approach for prototyping and testing them by a fast reactor.

scholarly journals Digitalization of the Ex-Core Neutron Flux Monitoring System for APR1400 Nuclear Power Plant

2020 ◽  
Vol 10 (23) ◽  
pp. 8331
Author(s):  
Young Baik Kim ◽  
Felipe P. Vista ◽  
Seung Bin Cho ◽  
Kil To Chong
Keyword(s):  
Neutron Flux ◽  
Monitoring System ◽  
Nuclear Power ◽  
Power Plants ◽  
Gamma Ray ◽  
Reactor Power ◽  
Power Calculation ◽  
Wide Range ◽  
Flux Monitoring ◽  
And Performance

This work studied the feasibility of digitalizing the analog Ex-Core Neutron Flux Monitoring System (ENFMS) being used for APR1400 nuclear power plants (NPPs) and as to which strategies and steps must be taken. A fission chamber neutron flux detection and instrumentation model were designed. Its accuracy was evaluated and proven by comparing the model data with data gathered from tests and plant operations. A conceptual design was proposed through a combined structure that digitalizes only part of the system. The detector signal pre-amplification remains in analog form while the other functions such as reactor power calculation as well as signal conditioning and processing will be digitalized. Simulations showed that the true mean squared voltage (MSV) of the digitalized ENFMS maintained a linear relationship between real and estimated reactor power in the wide range compared to averaged magnitude squared value of analog ENFMS. Extended Kalman Filter (EKF) was also utilized for estimating reactor power and reactor period from measurement signals that are contaminated with gamma ray interaction and electric noise. This study proved that the ENFMS can be successfully digitalized as proposed wherein all functional and performance requirements are satisfied. Simulations results demonstrated that the functions and performance can be improved through the use of digital processing algorithms such as EKF and MSV.

Optimization of Small Long Life Gas Cooled Fast Reactors with Natural Uranium as Fuel Cycle Input

2012 ◽  
Vol 260-261 ◽  
pp. 307-311 ◽  
Author(s):  
Menik Ariani ◽  
Z. Su'ud ◽  
Fiber Monado ◽  
A. Waris ◽  
Khairurrijal ◽  
...  
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Fuel Cycle ◽  
Volume Fraction ◽  
Natural Circulation ◽  
Average Power ◽  
Natural Uranium ◽  
Energy Utilization ◽  
Fast Reactors ◽  
Long Life

In this study gas cooled reactor system are combined with modified CANDLE burn-up scheme to create small long life fast reactors with natural circulation as fuel cycle input. Such system can utilize natural Uranium resources efficiently without the necessity of enrichment plant or reprocessing plant. Therefore using this type of nuclear power plants optimum nuclear energy utilization including in developing countries can be easily conducted without the problem of nuclear proliferation. In this paper, optimization of Small and Medium Long-life Gas Cooled Fast Reactors with Natural Uranium as Fuel Cycle Input has been performed. The optimization processes include adjustment of fuel region movement scheme, volume fraction adjustment, core dimension, etc. Due to the limitation of thermal hydraulic aspects, the average power density of the proposed design is selected about 75 W/cc. With such condition we investigated small and medium sized cores from 300 MWt to 600 MWt with all being operated for 10 years without refueling and fuel shuffling and just need natural Uranium as fuel cycle input. The average discharge burn-up is about in the range of 23-30% HM.

Fast Neutron-Flux Monitoring Instrumentation for Lead Fast Reactors: A Preliminary Study on Fission Chamber Performances

2014 ◽  
Author(s):  
Luigi Lepore ◽  
Romolo Remetti ◽  
Mauro Cappelli
Keyword(s):  
Neutron Flux ◽  
Fuel Cycle ◽  
Fast Reactors ◽  
Fission Chamber ◽  
Enhanced Sensitivity ◽  
Flux Monitoring ◽  
Preliminary Study ◽  
Fast Flux ◽  
Absolute Measurements ◽  
Fission Chambers

Although Sodium Fast Reactors (SFRs) are the most investigated solutions for the future fast-flux facilities so far, Lead Fast Reactors (LFRs) promise to be a very competitive alternative thanks to their peculiarity concerning coolant-safety, fuel cycle and waste management. Nevertheless, the development of LFRs presents today some drawbacks still to be solved. Due to the harder neutron flux, the current instrumentation developed for SFRs is likely to be extended to LFRs as a first attempt. Otherwise, new monitoring instrumentation could be developed in order to assure more tailored results. Different measurement technologies can be considered for fast flux monitoring and flux absolute measurements in order to provide a reliable and quick calibration of the overall reactor neutron instrumentation. The goal of this paper is to study the validity of typical fast reactor fission chamber designs (e.g. SuperPhénix fission chambers), indicating which are the limitations when used in a LFR environment. Afterwards, alternative detector solutions with enhanced sensitivity and response will be proposed.

scholarly journals Mathematical Formulation and Analytic Solutions for Uncertainty Analysis in Probabilistic Safety Assessment of Nuclear Power Plants

Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 929
Author(s):  
Gyun Seob Song ◽  
Man Cheol Kim
Keyword(s):  
Monte Carlo ◽  
Uncertainty Analysis ◽  
Probability Density ◽  
Nuclear Power ◽  
Safety Assessment ◽  
Power Plants ◽  
Mathematical Formulation ◽  
Analytic Solutions ◽  
Probabilistic Safety Assessment ◽  
Probabilistic Safety

Monte Carlo simulations are widely used for uncertainty analysis in the probabilistic safety assessment of nuclear power plants. Despite many advantages, such as its general applicability, a Monte Carlo simulation has inherent limitations as a simulation-based approach. This study provides a mathematical formulation and analytic solutions for the uncertainty analysis in a probabilistic safety assessment (PSA). Starting from the definitions of variables, mathematical equations are derived for synthesizing probability density functions for logical AND, logical OR, and logical OR with rare event approximation of two independent events. The equations can be applied consecutively when there exist more than two events. For fail-to-run failures, the probability density function for the unavailability has the same probability distribution as the probability density function (PDF) for the failure rate under specified conditions. The effectiveness of the analytic solutions is demonstrated by applying them to an example system. The resultant probability density functions are in good agreement with the Monte Carlo simulation results, which are in fact approximations for those from the analytic solutions, with errors less than 12.6%. Important theoretical aspects are examined with the analytic solutions such as the validity of the use of a right-unbounded distribution to describe the uncertainty in the unavailability/probability. The analytic solutions for uncertainty analysis can serve as a basis for all other methods, providing deeper insights into uncertainty analyses in probabilistic safety assessment.

scholarly journals Small nuclear power plants for power supply in arctic regions: assessment of spent nuclear fuel radioactivity

2018 ◽  
Vol 4 (2) ◽  
pp. 119-125
Author(s):  
Vadim Naumov ◽  
Sergey Gusak ◽  
Andrey Naumov
Keyword(s):  
Nuclear Fuel ◽  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Fuel Cycle ◽  
Mass Composition ◽  
Published Data ◽  
Pressurized Water ◽  
Fuel Cycles ◽  
Reactor Cores

The purpose of the present study is the investigation of mass composition of long-lived radionuclides accumulated in the fuel cycle of small nuclear power plants (SNPP) as well as long-lived radioactivity of spent fuel of such reactors. Analysis was performed of the published data on the projects of SNPP with pressurized water-cooled reactors (LWR) and reactors cooled with Pb-Bi eutectics (SVBR). Information was obtained on the parameters of fuel cycle, design and materials of reactor cores, thermodynamic characteristics of coolants of the primary cooling circuit for reactor facilities of different types. Mathematical models of fuel cycles of the cores of reactors of ABV, KLT-40S, RITM-200M, UNITERM, SVBR-10 and SVBR-100 types were developed. The KRATER software was applied for mathematical modeling of the fuel cycles where spatial-energy distribution of neutron flux density is determined within multi-group diffusion approximation and heterogeneity of reactor cores is taken into account using albedo method within the reactor cell model. Calculation studies of kinetics of burnup of isotopes in the initial fuel load (235U, 238U) and accumulation of long-lived fission products (85Kr, 90Sr, 137Cs, 151Sm) and actinoids (238,239,240,241,242Pu, 236U, 237Np, 241Am, 244Cm) in the cores of the examined SNPP reactor facilities were performed. The obtained information allowed estimating radiation characteristics of irradiated nuclear fuel and implementing comparison of long-lived radioactivity of spent reactor fuel of the SNPPs under study and of their prototypes (nuclear propulsion reactors). The comparison performed allowed formulating the conclusion on the possibility in principle (from the viewpoint of radiation safety) of application of SNF handling technology used in prototype reactors in the transportation and technological process layouts of handling SNF of SNPP reactors.

Steam Generator Replacement Project at TVA’s Sequoyah Unit 1 Nuclear Power Plant

2004 ◽  
Author(s):  
Myron R. Anderson
Keyword(s):  
Steam Generator ◽  
Nuclear Power ◽  
Power Plants ◽  
Reactor Power ◽  
Original Design ◽  
Pressurized Water ◽  
Repair Work ◽  
Building Roof ◽  
Tennessee Valley ◽  
Generator Replacement

Pressurized Water Reactor Power Plants have at times required that large components be replaced (steam generators weighing 750,000 lbs) which have necessitated performing first time modifications to the plant that were unintended during the original design. The steam generator replacement project at Tennessee Valley Authority (TVA’s) Sequoyah Nuclear Power Station necessitated (1) two large temporary openings (21’×45’) in the plant’s Shield Building roof (2’ thick concrete) by hydro-blasting to allow the removal of the old generators and installation of the new, (2) removal and repair of the concrete steam generator enclosure roofs (20’ diameter, 3’ thick) which were removed by wire saw cutting and (3) the seismic qualification of; the design and construction of an extensive ring foundation for; the use of one of the world largest cranes to remove these components through the roof. This removal and replacement process had to be performed in an expeditious manner to minimize the amount of time the plant is shutdown so the plant could return to providing power to the grid. This paper will address some of the many technical and construction considerations required to perform this demolition and repair work safely, efficiently and in a short as possible duration.

Transmutation and the Global Nuclear Energy Partnership

2006 ◽  
Vol 985 ◽  
Author(s):  
James Bresee
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Energy ◽  
Energy Use ◽  
Fuel Cycle ◽  
Spent Fuel ◽  
Closed Fuel Cycle ◽  
State Of The Union ◽  
Foreign Countries ◽  
The U.S

AbstractIn the January 2006 State of the Union address, President Bush announced a new Advanced Energy Initiative, a significant part of which is the Global Nuclear Energy Initiative. Its details were described on February 6, 2006 by the U.S. Secretary of Energy. In summary, it has three parts: (1) a program to expand nuclear energy use domestically and in foreign countries to support economic growth while reducing the release of greenhouse gases such as carbon dioxide. (2) an expansion of the U.S. nuclear infrastructure that will lead to the recycling of spent fuel and a closed fuel cycle and, through transmutation, a reduction in the quantity and radiotoxicity of nuclear waste and its proliferation concerns, and (3) a partnership with other fuel cycle nations to support nuclear power in additional nations by providing small nuclear power plants and leased fuel with the provision that the resulting spent fuel would be returned by the lessee to the lessor. The final part would have the effect of stabilizing the number of fuel cycle countries with attendant non-proliferation value. Details will be given later in the paper.

Scenario Analysis on the Benefits of Multi-National Cooperation for the Development of a Common Nuclear Energy System Based on PWR and LFR Fleets

2014 ◽  
Author(s):  
Marco Ciotti ◽  
Jorge L. Manzano ◽  
Vladimir Kuznetsov ◽  
Galina Fesenko ◽  
Luisa Ferroni ◽  
...  
Keyword(s):  
Public Opinion ◽  
Nuclear Fuel ◽  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Energy ◽  
Fuel Cycle ◽  
Proper Time ◽  
Nuclear Fuel Cycle ◽  
Levelized Cost Of Electricity ◽  
Base Load

Financial aspects, environmental concerns and non-favorable public opinion are strongly conditioning the deployment of new Nuclear Energy Systems across Europe. Nevertheless, new possibilities are emerging to render competitive electricity from Nuclear Power Plants (NPPs) owing to two factors: the first one, which is the fast growth of High Voltage lines interconnecting the European countries’ national electrical grids, this process being triggered by huge increase of the installed intermittent renewable electricity sources (Wind and PV); and the second one, determined by the carbon-free constraints imposed on the base load electricity generation. The countries that due to public opinion pressure can’t build new NPPs on their territory may find it profitable to produce base load nuclear electricity abroad, even at long distances, in order to comply with the European dispositions on the limitation of the CO2 emissions. In this study the benefits from operating at multinational level with the deployment of a fleet of PWRs and subsequently, at a proper time, the one of Lead Fast Reactors (LFRs) are analyzed. The analysis performed involves Italy (a country with a current moratorium on nuclear power on spite that its biggest utility operates NPPs abroad), and the countries from South East and Central East Europe potentially looking for introduction or expansion of their nuclear power programmes. According to the predicted evolution of their Gross Domestic Product (GDP) a forecast of the electricity consumption evolution for the present century is derived with the assumption that a certain fraction of it will be covered by nuclear electricity. In this context, evaluated are material balances for the front and the back end of nuclear fuel cycle associated with the installed nuclear capacity. A key element of the analysis is the particular type of LFR assumed in the scenario, characterized by having a fuel cycle where only fission products and the reprocessing losses are sent for disposition and natural or depleted uranium is added to fuel in each reprocessing cycle. Such LFR could be referred to as “adiabatic reactor”. Owing to introduction of such reactors a substantive reduction in uranium consumption and final disposal requirements can be achieved. Finally, the impacts of the LFR and the economy of scale in nuclear fuel cycle on the Levelized Cost of Electricity (LCOE) are being evaluated, for scaling up from a national to a multinational dimension, illustrating the benefits potentially achievable through cooperation among countries.

Sign in / Sign up

Export Citation Format

Share Document