scholarly journals New AVO Attributes and Their Applications for Facies and Hydrocarbon Prediction: A Case Study from the Northern Malay Basin

2020 ◽  
Vol 10 (21) ◽  
pp. 7786
Author(s):  
Tsara Kamilah Ridwan ◽  
Maman Hermana ◽  
Luluan Almanna Lubis ◽  
Zaky Ahmad Riyadi
Keyword(s):  
Quality Factor ◽  
Poisson’S Ratio ◽  
Water Saturation ◽  
P Wave ◽  
Poisson's Ratio ◽  
Fluid Distribution ◽  
Well Log ◽  
Log Data ◽  
Avo Analysis ◽  
Avo Attributes

Amplitude versus offset (AVO) analysis integration to well log analysis is considered one of the advanced techniques to improve the understanding of facies and fluid analysis. Generating AVO attributes are one solution to give an accurate result in facies and fluid characterization. This study is focused on a field of Northern Malay basin, which is associated with a fluvial-deltaic environment, where this system has high heterogeneity, whether it is vertically or horizontally. This research is aimed to demonstrate an application of the scale of quality factor of P-wave (SQp) and the scale of quality factor of S-wave (SQs) AVO attributes for facies and fluid types separation in field scale. These methods are supposed to be more sensitive to predict the hydrocarbons and give less ambiguity. SQp and SQs are the new AVO attributes, which derived from AVO analysis and created according to the intercept product (A) and gradient (B). These new attributes have also been compared to the common method, which is the Scaled Poisson’s Ratio attribute. By comparing with the Scaled Poisson’s Ratio attribute, SQp and SQs attributes are more accurate in determining facies and hydrocarbon. SQp and SQs AVO attributes are integrated with well log data and considered as the best technique to determine facies and fluid distribution. They are interpreted by using angle-stack seismic data based on amplitude contrast on interfaces. Well log data, e.g., density and sonic logs, are used to generate synthetic seismogram and well tie requirements. The volume of shale, volume of coal, porosity, and water saturation logs are used to identify facies and fluid in well log scale. This analysis includes AVO gradient analysis and AVO cross plot to identify the fluid class. Gassmann’s fluid substitution modeling is also generated in the well logs and AVO synthetics for in situ, pure brine, and pure gas cases. The application of the SQp and SQs attributes successfully interpreted facies and fluids distributions in the Northern Malay Basin.

scholarly journals Feasibility Study on the Application of Dynamic Elastic Rock Properties from Well Log for Shale Hydrocarbon Development of Brownshale Formation in the Bengkalis Trough, Central Sumatra Basin, Indonesia.

2021 ◽  
Vol 6 (2) ◽  
pp. 81-85
Author(s):  
Ahmad Muraji Suranto ◽  
Aris Buntoro ◽  
Carolus Prasetyadi ◽  
Ricky Adi Wibowo
Keyword(s):  
Young’S Modulus ◽  
Poisson’S Ratio ◽  
Young's Modulus ◽  
Well Logs ◽  
Poisson's Ratio ◽  
Rock Properties ◽  
Well Log ◽  
Log Data ◽  
Core Data ◽  
Elastic Rock

In modeling the hydraulic fracking program for unconventional reservoir shales, information about elasticity rock properties is needed, namely Young's Modulus and Poisson's ratio as the basis for determining the formation depth interval with high brittleness. The elastic rock properties (Young's Modulus and Poisson's ratio) are a geomechanical parameters used to identify rock brittleness using core data (static data) and well log data (dynamic data). A common problem is that the core data is not available as the most reliable data, so well log data is used. The principle of measuring elastic rock properties in the rock mechanics lab is very different from measurements with well logs, where measurements in the lab are in high stresses / strains, low strain rates, and usually drained, while measurements in well logging use the principle of measured downhole by high frequency sonic. vibrations in conditions of very low stresses / strains, High strain rate, and Always undrained. For this reason, it is necessary to convert dynamic to static elastic rock properties (Poisson's ratio and Young's modulus) using empirical equations. The conversion of elastic rock properties (well logs) from dynamic to static using the empirical calculation method shows a significant shift in the value of Young's Modulus and Poisson's ratio, namely a shift from the ductile zone dominance to the dominant brittle zone. The conversion results were validated with the rock mechanical test results from the analog outcrop cores (static) showing that the results were sufficiently correlated based on the distribution range.

3-D AVO analysis and modeling applied to fracture detection in coalbed methane reservoirs

Geophysics ◽  
1997 ◽  
Vol 62 (6) ◽  
pp. 1683-1695 ◽  
Author(s):  
Antonio C. B. Ramos ◽  
Thomas L. Davis
Keyword(s):  
Poisson’S Ratio ◽  
Coalbed Methane ◽  
Spatial Location ◽  
Azimuthal Anisotropy ◽  
P Wave ◽  
Poisson's Ratio ◽  
Seismic Survey ◽  
Data Set ◽  
Avo Analysis ◽  
Coalbed Methane Reservoir

Over the years, amplitude variation with‐offset (AVO) analysis has been used successfully to predict reservoir properties and fluid contents, in some cases allowing the spatial location of gas‐water and gas‐oil contacts. In this paper, we show that a 3-D AVO technique also can be used to characterize fractured reservoirs, allowing spatial location of crack density variations. The Cedar Hill Field in the San Juan Basin, New Mexico, produces methane from the fractured coalbeds of the Fruitland Formation. The presence of fracturing is critical to methane production because of the absence of matrix permeability in the coals. To help characterize this coalbed reservoir, a 3-D, multicomponent seismic survey was acquired in this field. In this study, prestack P‐wave amplitude data from the multicomponent data set are used to delineate zones of large Poisson's ratio contrasts (or high crack densities) in the coalbed methane reservoir, while source‐receiver azimuth sorting is used to detect preferential directions of azimuthal anisotropy caused by the fracturing system of coal. Two modeling techniques (using ray tracing and reflectivity methods) predict the effects of fractured coal‐seam zones on angle‐dependent P‐wave reflectivity. Synthetic common‐midpoint (CMP) gathers are generated for a horizontally layered earth model that uses elastic parameters derived from sonic and density log measurements. Fracture density variations in coalbeds are simulated by anisotropic modeling. The large acoustic impedance contrasts associated with the sandstone‐coal interfaces dominate the P‐wave reflectivity response. They far outweigh the effects of contrasts in anisotropic parameters for the computed models. Seismic AVO analysis of nine macrobins obtained from the 3-D volume confirms model predictions. Areas with large AVO intercepts indicate low‐velocity coals, possibly related to zones of stress relief. Areas with large AVO gradients identify coal zones of large Poisson's ratio contrasts and therefore high fracture densities in the coalbed methane reservoir. The 3-D AVO product and Poisson's variation maps combine these responses, producing a picture of the reservoir that includes its degree of fracturing and its possible stress condition. Source‐receiver azimuth sorting is used to detect preferential directions of azimuthal anisotropy caused by the fracturing system of coal.

scholarly journals INTEGRATED AVO, ELASTIC SEISMIC INVERSION AND PETROPHYSICAL ANALYSIS FOR RESERVOIR CHARACTERIZATION: A CASE STUDY OF GAS FIELD, SOUTH SUMATERA BASIN

2018 ◽  
Vol 3 (1) ◽  
pp. 7-14
Author(s):  
Abdul Haris ◽  
Ressy Sandrina ◽  
Agus Riyanto
Keyword(s):  
Water Saturation ◽  
Seismic Inversion ◽  
Elastic Parameter ◽  
Well Log ◽  
Gas Field ◽  
Log Data ◽  
Petrophysical Analysis ◽  
Avo Analysis ◽  
Shale Volume

Integrated Amplitude Versus Offset ( AVO), elastic seismic inversion and petrophysical analysis have been successfully applied to estimate the elastic parameters of the reservoir for a case study of the gas field in south Sumatera basin. This paper aims to have better understanding the petrophysical properties of the reservoir. The petrophysical analysis was carried out by performing routine formation evaluation that includes calculation of shale volume, porosity, and water saturation of basic well log data. Sensitivity analysis was conducted to evaluate the sensitivity parameters of the log for changing in lithology, porosity, and fluid content in the reservoir. For completing the availability of elastic parameter from well log data, shear wave logs were derived from Castagna’s mudrock line relationship. Further, P-impedance, S-impedance, VpVs ratio, LambdaRho (λρ), MuRho (μρ) and density(ρ) were then calculated through a Lambda-Mu-Rho (LMR) transformation. Prior to performing AVO analysis and elastic seismic inversion, super gather technique was applied to improve the reliability of pre-stack seismic data. Elastic seismic inversion was carried out to extract the lateral elastic properties to capture lithology and fluid changes in the reservoir. In addition, AVO analysis of pre-stacked data was applied to identify hydrocarbon-bearing sandstone at target zone. The petrophysical analysis shows that porosity versus density crossplot is able to distinguish sand-shale based on 34% shale volume cutoff, while LMR crossplot is able to delineate hydrocarbon zone at water saturation value under 65%. The predicted lateral elastic parameter shows slightly higher value compare to overlying layer.

Some numerical solutions for Lamb's problem

1974 ◽  
Vol 64 (2) ◽  
pp. 473-491
Author(s):  
Harold M. Mooney
Keyword(s):  
Rayleigh Wave ◽  
Poisson’S Ratio ◽  
Pulse Width ◽  
Numerical Solutions ◽  
Pulse Height ◽  
P Wave ◽  
Poisson's Ratio ◽  
Wave Form ◽  
Lamb’S Problem ◽  
Wave Forms

abstract We consider a version of Lamb's Problem in which a vertical time-dependent point force acts on the surface of a uniform half-space. The resulting surface disturbance is computed as vertical and horizontal components of displacement, particle velocity, acceleration, and strain. The goal is to provide numerical solutions appropriate to a comparison with observed wave forms produced by impacts onto granite and onto soil. Solutions for step- and delta-function sources are not physically realistic but represent limiting cases. They show a clear P arrival (larger on horizontal than vertical components) and an obscure S arrival. The Rayleigh pulse includes a singularity at the theoretical arrival time. All of the energy buildup appears on the vertical components and all of the energy decay, on the horizontal components. The effects of Poisson's ratio upon vertical displacements for a step-function source are shown. For fixed shear velocity, an increase of Poisson's ratio produces a P pulse which is larger, faster, and more gradually emergent, an S pulse with more clear-cut beginning, and a much narrower Rayleigh pulse. For a source-time function given by cos2(πt/T), −T/2 ≦ T/2, a × 10 reduction in pulse width at fixed pulse height yields an increase in P and Rayleigh-wave amplitudes by factors of 1, 10, and 100 for displacement, velocity and strain, and acceleration, respectively. The observed wave forms appear somewhat oscillatory, with widths proportional to the source pulse width. The Rayleigh pulse appears as emergent positive on vertical components and as sharp negative on horizontal components. We show a theoretical seismic profile for granite, with source pulse width of 10 µsec and detectors at 10, 20, 30, 40, and 50 cm. Pulse amplitude decays as r−1 for P wave and r−12 for Rayleigh wave. Pulse width broadens slightly with distance but the wave form character remains essentially unchanged.

Frame moduli of unconsolidated sands and sandstones

Geophysics ◽  
1994 ◽  
Vol 59 (9) ◽  
pp. 1352-1361 ◽  
Author(s):  
James W. Spencer ◽  
Michael E. Cates ◽  
Don D. Thompson
Keyword(s):  
Poisson’S Ratio ◽  
Empirical Relation ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
P Wave ◽  
Poisson's Ratio ◽  
Unconsolidated Sands ◽  
Seismic Amplitude ◽  
Seismic Frequencies

In this study, we investigate the elastic moduli of the empty grain framework (the “frame” moduli) in unconsolidated sands and consolidated sandstones. The work was done to improve the interpretation of seismic amplitude anomalies and amplitude variations with offset (AVO) associated with hydrocarbon reservoirs. We developed a laboratory apparatus to measure the frame Poisson’s ratio and Young’s modulus of unconsolidated sands at seismic frequencies (0.2 to 155 Hz) in samples approximately 11 cm long. We used ultrasonic pulse velocity measurements to measure the frame moduli of consolidated sandstones. We found that the correlation coefficient between the frame Poisson’s ratio [Formula: see text] and the mineral Poisson’s ratio [Formula: see text] is 0.84 in consolidated sandstones and only 0.28 in unconsolidated sands. The range of [Formula: see text] values in unconsolidated sands is 0.115 to 0.237 (mean = 0.187, standard deviation = 0.030), and [Formula: see text] cannot be estimated without core or log analyses. Frame moduli analyses of core samples can be used to calibrate the interpretation of seismic amplitude anomalies and AVO effects. For use in areas without core or log analyses, we developed an empirical relation that can be used to estimate [Formula: see text] in unconsolidated sands and sandstones from [Formula: see text] and the frame P‐wave modulus.

scholarly journals Fluid prediction of a deep carbonate reservoir using walkaround 3D-3C vertical seismic profiling data

2019 ◽  
Author(s):  
Haohao Zhang ◽  
Jun Lu ◽  
Benchi Chen ◽  
Xuejun Ma ◽  
Zhidong Cai
Keyword(s):  
Poisson’S Ratio ◽  
Wave Impedance ◽  
Carbonate Reservoir ◽  
P Wave ◽  
Poisson's Ratio ◽  
Inversion Method ◽  
Seismic Profiling ◽  
Tahe Oilfield ◽  
Vertical Seismic Profiling ◽  
Time Migration

Abstract The considerable depth and complicated structure of the Tahe Oilfield in the Tuofutai area of China make it very difficult to delineate its Ordovician carbonate fracture-cavity reservoir. The resolution of conventional ground seismic data is inadequate to satisfy current exploitation requirements. To further improve the understanding of the carbonate fracture-cavity reservoir of the Tahe Oilfield and to provide predictions of reservoir properties that are more accurate, a walkaround 3D-3C vertical seismic profiling (VSP) survey was conducted. First, we preprocessed raw VSP data and developed a method of joint PP- and PSV-wave prestack time migration. In contrast to ground seismic imaging profiles, VSP imaging profiles have a higher resolution and wider spectrum range that provide more detailed strata information. Then, using the joint PP- and PSV-wave prestack inversion method, we obtained the PP- and PSV-wave impedance and Poisson's ratio parameters of the Ordovician carbonate reservoir. Compared with the P-wave impedance of the ground seismic inversion, we found the VSP inversion results had higher accuracy, which enabled clearer identification of the internal characteristics of the carbonate reservoir. Finally, coupled with the Poisson's ratio attribute, we predicted the distribution of favorable reservoirs and interwell connectivity. The prediction results were verified using both logging and production data. The findings of this study demonstrate the applicability of the proposed technical method for the exploration of deep carbonate fracture-cavity reservoirs.

Elastic impedance inversion of multichannel seismic data from unconsolidated sediments containing gas hydrate and free gas

Geophysics ◽  
2004 ◽  
Vol 69 (1) ◽  
pp. 164-179 ◽  
Author(s):  
Shaoming Lu ◽  
George A. McMechan
Keyword(s):  
Elastic Properties ◽  
Gas Hydrate ◽  
Poisson’S Ratio ◽  
P Wave ◽  
Poisson's Ratio ◽  
Unconsolidated Sediments ◽  
Free Gas ◽  
Impedance Inversion ◽  
Elastic Impedance ◽  
New Algorithms

The elastic properties of hydrated sediments are not well‐known, which leads to inaccuracy in the evaluation of the amount of gas hydrate worldwide. Elastic impedance inversion is useful in estimating the elastic properties of sediments containing gas hydrate, or free gas trapped beneath the gas hydrate, from angle‐dependent P‐wave reflections. We reprocess the multichannel U.S. Geological Survey seismic line BT‐1 from the Blake Ridge off the east coast of North America to obtain migrated common‐angle aperture data sets, which are then inverted for elastic impedance. Two new algorithms to estimate P‐impedance and S‐impedance from the elastic impedance are developed and evaluated using well‐log data from Ocean Drilling Program (ODP) Leg 164; these new algorithms are stable, even in the presence of modest noise in the data. The Vs/Vp ratio, Poisson's ratio, and Lamé parameter terms λρ and λ/μ are estimated from the P‐impedance and S‐impedance. The hydrated sediments have high elastic impedance, high P‐impedance, high S‐impedance, high λρ, slightly higher Vs/Vp ratio, slightly lower Poisson's ratio, and slightly lower λ/μ values compared to those of the surrounding unhydrated sediments. The sediments containing free gas have low elastic impedance, low P‐impedance, nonanomalous background S‐impedance, high Vs/Vp ratio, low Poisson's ratio, low λρ, and low λ/μ values. We conclude that some parameters such as Vs/Vp ratio, Poisson's ratio, and λ/μ, although they help identify the free‐gas charged layers, cannot differentiate between the hydrated sediments and nonhydrated sediments when gas hydrate concentration is low, and cannot differentiate between the hydrated sediments and free‐gas charged sediments when the gas hydrate concentration is high. Three distinct layers of gas hydrate are interpreted as being caused by gas hydrates with gas of different molecular weights, with correspondingly different stability zones in depth. Free gas appears to be present below the two deeper gas‐hydrate layers, but not below the shallowest one because the lack of a trapping structure. The gas hydrate has an average concentration of ∼3–5.5% by volume, and is highest (9%) at the base of the lower gas hydrate stability zone. The free‐gas concentration ranges from 1 to 8% by volume, and is most developed beneath the local topographic high of the ocean bottom.

Seismic wave velocity investigation at The Geysers‐Clear Lake geothermal field, California

Geophysics ◽  
1982 ◽  
Vol 47 (5) ◽  
pp. 819-824 ◽  
Author(s):  
Harsh K. Gupta ◽  
Ronald W. Ward ◽  
Tzeu‐Lie Lin
Keyword(s):  
Wave Velocity ◽  
Poisson’S Ratio ◽  
Poisson Ratio ◽  
Volcanic Field ◽  
P Wave ◽  
Poisson's Ratio ◽  
Clear Lake ◽  
Seismic Wave Velocity ◽  
S Waves ◽  
The Geysers

Analysis of P‐ and S‐waves from shallow microearthquakes in the vicinity of The Geysers geothermal area, California, recorded by a dense, telemetered seismic array operated by the U.S. Geological Survey (USGS) shows that these phases are easily recognized and traced on record sections to distances of 80 km. Regional average velocities for the upper crust are estimated to be [Formula: see text] and [Formula: see text] for P‐ and S‐waves, respectively. Poisson’s ratio is estimated at 23 locations using Wadati diagrams and is found to vary from 0.13 to 0.32. In general, the Poisson’s ratio is found to be lower at the locations close to the steam production zones at The Geysers and Clear Lake volcanic field to the northeast. The low Poisson ratio corresponds to a decrease in P‐wave velocity in areas of high heat flow. The decrease may be caused by fracturing of the rock and saturation with gas or steam.

Elastic impedance parameterization and inversion with Young’s modulus and Poisson’s ratio

Geophysics ◽  
2013 ◽  
Vol 78 (6) ◽  
pp. N35-N42 ◽  
Author(s):  
Zhaoyun Zong ◽  
Xingyao Yin ◽  
Guochen Wu
Keyword(s):  
Parameter Estimation ◽  
Young’S Modulus ◽  
Seismic Data ◽  
Poisson’S Ratio ◽  
Young's Modulus ◽  
Incident Angle ◽  
P Wave ◽  
Poisson's Ratio ◽  
Data Set ◽  
Elastic Impedance

Young’s modulus and Poisson’s ratio are related to quantitative reservoir properties such as porosity, rock strength, mineral and total organic carbon content, and they can be used to infer preferential drilling locations or sweet spots. Conventionally, they are computed and estimated with a rock physics law in terms of P-wave, S-wave impedances/velocities, and density which may be directly inverted with prestack seismic data. However, the density term imbedded in Young’s modulus is difficult to estimate because it is less sensitive to seismic-amplitude variations, and the indirect way can create more uncertainty for the estimation of Young’s modulus and Poisson’s ratio. This study combines the elastic impedance equation in terms of Young’s modulus and Poisson’s ratio and elastic impedance variation with incident angle inversion to produce a stable and direct way to estimate the Young’s modulus and Poisson’s ratio, with no need for density information from prestack seismic data. We initially derive a novel elastic impedance equation in terms of Young’s modulus and Poisson’s ratio. And then, to enhance the estimation stability, we develop the elastic impedance varying with incident angle inversion with damping singular value decomposition (EVA-DSVD) method to estimate the Young’s modulus and Poisson’s ratio. This method is implemented in a two-step inversion: Elastic impedance inversion and parameter estimation. The introduction of a model constraint and DSVD algorithm in parameter estimation renders the EVA-DSVD inversion more stable. Tests on synthetic data show that the Young’s modulus and Poisson’s ratio are still estimated reasonable with moderate noise. A test on a real data set shows that the estimated results are in good agreement with the results of well interpretation.

Sign in / Sign up

Export Citation Format

Share Document