scholarly journals Multi-Step Prestressing with Hybrid SMA Wires

2020 ◽  
Vol 10 (8) ◽  
pp. 2842
Author(s):  
Chi-Young Jung ◽  
Tae-Ryeon Woo ◽  
Jong-Han Lee
Keyword(s):  
Carrying Capacity ◽  
Load Carrying Capacity ◽  
Hydraulic Jack ◽  
Rc Structures ◽  
Prestressing Force ◽  
Rc Structure ◽  
Load Carrying ◽  
Experimental Parameters ◽  
Different Types ◽  
Prestressing Strand

Prestressing force is induced in reinforced concrete (RC) structures to improve their load-carrying capacity. Generally, the prestressing strand of an RC structure is tensioned using a hydraulic jack, which decreases its workability. In this study, we evaluate the application of prestressing force by using a shape memory alloy (SMA), as has been actively studied in civil engineering. Experiments were conducted to measure the multi-stepwise prestressing force introduced in a hybrid SMA wire composed of two different types of SMA wires. The experimental parameters were determined based on the combinations of the SMA wires and the heating temperatures. The results of the experiments show that the prestressing force was induced in a sequence. The magnitude of the prestressing force generated by the hybrid SMA wire was equal to the sum of the prestressing forces generated by the NiTi50 and NiTi90 SMA wires. In conclusion, this study verified the applicability of the proposed concept of multi-stepwise prestressing by using hybrid SMA wires. Further research is required to measure the effect of prestressing by locally heating the center of a girder with the aim of expanding the applicability of this concept.

Flexural strengthening of pre-cracked RC slabs with prestressed NSM CFRP laminates and evaluation of strain loss

2021 ◽  
pp. 136943322110105
Author(s):  
M.R. Mostakhdemin Hosseini ◽  
Salvador J.E. Dias ◽  
Joaquim A.O. Barros
Keyword(s):  
Carrying Capacity ◽  
Load Carrying Capacity ◽  
Limit States ◽  
Transfer Length ◽  
Rc Structures ◽  
Cracked Concrete ◽  
Flexural Strengthening ◽  
Cfrp Laminates ◽  
Load Carrying ◽  
Rc Slabs

The strengthening intervention of RC structures often involves already cracked concrete. To evaluate the effect of the level of damage prior to the strengthening (pre-cracks) on the behavior of the flexurally strengthened RC slabs with prestressed NSM CFRP laminates, an experimental research was carried out. Two pre-cracking levels of damage were analyzed and, for each one, three levels of prestress were tested (0%, 20% and 40%). The obtained results showed that the strengthening of damaged RC slabs with prestressed NSM CFRP laminates results in a significant increase on the load carrying capacity at serviceability limit states. Pre-cracked RC slabs strengthened with prestressed NSM CFRP laminates presented a load carrying capacity almost similar to the corresponding uncracked strengthened slabs. To determine the effective prestress level in CFRP laminates, the variation of strain over the length of the CFRP and over time was experimentally recorded. The prestress transfer length was also evaluated. The experimental results revealed that the transfer length of CFRP laminates was less than 150 mm, and the maximum value of strain loss out of transfer length (around 14%) was measured close to the cracked section of the damaged RC slabs. Significant part of strain loss in CFRP laminates occurred during 24 h after releasing the prestress load.

Influence of water contamination in gear lubricants on wear and micro-pitting performance of case carburized gears

2017 ◽  
Vol 69 (4) ◽  
pp. 612-619 ◽  
Author(s):  
Christian Engelhardt ◽  
Jochen Witzig ◽  
Thomas Tobie ◽  
Karsten Stahl
Keyword(s):  
Carrying Capacity ◽  
Research Work ◽  
Load Carrying Capacity ◽  
Wear Performance ◽  
Content Type ◽  
Effect Of Water ◽  
Base Oils ◽  
Load Carrying ◽  
Different Types ◽  
Influence Of Water

Purpose Water can alter the performance of modern gear lubricants by influencing the flank load carrying capacity of gears significantly. The purpose of this paper is to investigate the influence of water contaminations in different kinds of base oils on the micro-pitting and wear performance of case carburized gears. Design/methodology/approach Concerning micro-pitting and wear, tests, based mostly on the following standardized tests, are performed on a Forschungsstelle fuer zahnraeder und getriebebau (FZG)-back-to-back gear test rig: micro-pitting short test Graufleckenkurztest (GFKT) according to DGMK 575 (screening test), micro-pitting test Graufleckentest (GT) according to FVA 54/7 (load stage test and endurance test) and Slow-speed wear test according to DGMK 377. To investigate the effect of water on the gear load carrying capacity dependent on different types of base oils, two polyglycol oils (PG1 and PG2), a polyalphaolefin oil, a mineral oil and an ester oil E are used. Each of these oils are common wind turbine gear oils with a viscosity ISO VG-220. Additionally, a manual transmission fluid with a viscosity of society of automotive engineers (SAE) 75W-85 is tested. Findings Considering the micro-pitting and wear performance, a significant decrease caused by water contaminations could not be detected. Regarding pitting damages, a generally negative influence was observed. This influence was differently distinctive for different base oil types. Especially non-polar lubricants seem to be affected negatively. The documented damages of the tooth flanks confirm this observation. While typical pitting damages appeared in test runs with polar lubricants, the disruption in test runs with non-polar lubricants was more extensive. Based on the experimental investigations, a general model of the damaging mechanisms of water contaminations in lubricants was derived. It is split into three partitions: interaction lubricant–water (effect of water on the molecular structure of base oils and additives), chemical-material-technological (especially corrosive reactions) and tribological influence (effect of water droplets in the contact zone). It has to be considered that the additive package of lubricants affects the influence of water contaminations on the flank load carrying capacity distinctively. An influence of water on the micro-pitting and wear performance in other than the given lubricants cannot be excluded. Originality/value While former research work was focused more on the effects of water in mineral oils, investigations concerning different types of base oils as well as different types of damages were carried out within this research project.

AN IMPROVED ANALYTICAL METHOD FOR RESTRAINED RC STRUCTURES SUBJECTED TO STATIC AND DYNAMIC LOADS

2013 ◽  
Vol 14 (01) ◽  
pp. 1350052 ◽  
Author(s):  
LI CHEN ◽  
QIN FANG ◽  
ZHIKUN GUO ◽  
JINCHUN LIU
Keyword(s):  
Test Data ◽  
Carrying Capacity ◽  
Analytical Method ◽  
Action Theory ◽  
Reinforcement Ratio ◽  
Dynamic Resistance ◽  
Load Carrying Capacity ◽  
Membrane Action ◽  
Rc Structures ◽  
Load Carrying

Once a RC structure is laterally restrained, both the static and dynamic load resistances will be enhanced due to the membrane action. Despite this known advantage, the apparent lack of systemic and efficient methods of analysis poses a drawback in the design and assessment of blast-resistant RC structures. First, a simplified membrane action theory was presented by modifying the maximum membrane force design method (MMFM) for predicting the total static resistance-deflection curves of restrained beam-slab RC structures. Second, a series of constrained beams were tested to validate the new theory, for which better agreement was observed between the test data, the results predicted by the proposed theory and those by MMFM. The results show that the static load carrying capacity and membrane force increase with increasing restraint stiffness, and the smaller the reinforcement ratio is, the larger the load carrying capacity increases. Third, based on the improved compressive static membrane action theory, a new analytical method was developed to investigate the dynamic responses of restrained RC structures subjected to blast loads, using an equivalent single degree of freedom system that combines the three-parameter elasto-viscoplastic rate-sensitive material model with the proposed static theory. Good agreement is observed between the test data and the analytical results. Finally, it is demonstrated that the dynamic resistance capacity increases with increasing load rate and restraint stiffness and with decreasing tensile reinforcement ratio, but the larger the dynamic resistance is, the larger the plastic deformation of the structure.

Parametric Study of Tendon Profiles in Prestressed Steel Plate Girder

2002 ◽  
Vol 5 (2) ◽  
pp. 75-85 ◽  
Author(s):  
G. N. Ronghe ◽  
L. M. Gupta
Keyword(s):  
Carrying Capacity ◽  
Steel Plate ◽  
Steel Structures ◽  
Prototype Model ◽  
Load Carrying Capacity ◽  
Prestressing Steel ◽  
Analysis And Design ◽  
Prestressing Force ◽  
Load Carrying ◽  
Plate Girder

The concept of prestressing steel structures has only recently been widely considered, despite a long and successful history of prestressing concrete members. Several analytical studies of prestressed steel plate girder were reported in the literature, but much of that work was not studied with reference to different parameters like tendon profile, eccentricity, partial span to full span ratio, prestressing force, load carrying capacity etc. associated with prestressing. This paper examines analytically a comparative study of various tendon configurations and prestressing parameters on over all analysis and design of prestressed steel plate girder. The output from the computer Program for analysis and design of steel plate girder prestressed with different tendon configurations are compared among each other. As a Case-study, a prototype model of Prestressed Steel Testing Frame with straight tendon has been designed, constructed and tested in the laboratory for its safe load carrying capacity and maximum deflection.

Tribology of Lubricants

2021 ◽  
pp. 391-420
Keyword(s):  
Service Life ◽  
Tribological Properties ◽  
Carrying Capacity ◽  
Solid Lubricants ◽  
Load Carrying Capacity ◽  
Friction Control ◽  
Load Carrying ◽  
Different Types ◽  
Traction Fluids ◽  
The Relationship

Abstract This chapter covers the tribological properties of different types of oil, greases, solid lubricants, and metalworking and traction fluids. It explains how lubricants are made, how they work, and how they are applied and tested. It also discusses the fundamentals of lubrication and friction control, the relationship between viscosity and breakaway friction, and the factors that affect load-carrying capacity and service life.

Analysis of shear behavior between old concrete and fiber concrete

2021 ◽  
Author(s):  
Martin Vavruš ◽  
Peter Koteš ◽  
František Bahleda ◽  
Jozef Jošt
Keyword(s):  
Carrying Capacity ◽  
Research Work ◽  
Concrete Structures ◽  
Mechanical Damage ◽  
Load Carrying Capacity ◽  
Load Carrying ◽  
Fiber Concrete ◽  
Different Types ◽  
Thawing And Freezing Cycles

AbstractConcrete structures that are influenced by degradation, overloading, the thawing, and freezing cycles, corrosion of reinforced bars, should be repaired or strengthened. Each of the mentioned influences lead to decreased load-carrying capacity of the structure or its member. Exceeding the load-carrying capacity leads to mechanical damage of members or excessive deformation. The damaged member has to be strengthened to the required level of reliability and load-carrying capacity. There exist many types and methods of strengthening the columns. This research work deals with strengthening of columns by concreting a new layer of fiber concrete. When applying that type of strengthening, it is necessary to assure the contact between the old layer and the new one. The paper deals with analysis of different types of contacts and determination of their parametric values.

Theoretical and Experimental Analysis of Hydrostatic Thrust Bearings

1960 ◽  
Vol 82 (3) ◽  
pp. 505-511 ◽  
Author(s):  
R. C. Elwell ◽  
B. Sternlicht
Keyword(s):  
Experimental Verification ◽  
Carrying Capacity ◽  
Experimental Analysis ◽  
Load Carrying Capacity ◽  
Constant Flow ◽  
Temperature Changes ◽  
Thrust Bearings ◽  
Flow Restriction ◽  
Load Carrying ◽  
Different Types

This paper presents theoretical and experimental analysis of two types of circular hydrostatic thrust bearings, using incompressible lubricants. Design equations for load-carrying capacity, stiffness, and flow, are given for three different types of flow restriction—orifice, capillary, and constant flow. Experimental verification of the equations is shown. It is seen that each method of restriction imparts its own characteristics on the bearing performance. Constant flow, for instance, results in the stiffest bearing under certain conditions, and capillary restriction is unaffected by temperature changes.

scholarly journals Crack Width and Load-Carrying Capacity of RC Elements Strengthened with FRP

2018 ◽  
Vol 2018 ◽  
pp. 1-14 ◽  
Author(s):  
Justas Slaitas ◽  
Mykolas Daugevičius ◽  
Juozas Valivonis ◽  
Tatjana Grigorjeva
Keyword(s):  
Crack Propagation ◽  
Carrying Capacity ◽  
Crack Width ◽  
Crack Depth ◽  
Experimental Program ◽  
Mechanics Of Solids ◽  
Crack Model ◽  
Load Carrying Capacity ◽  
Rc Structures ◽  
Load Carrying

The present study focuses on a prediction of crack width and load-carrying capacity of flexural reinforced concrete (RC) elements strengthened with fibre-reinforced polymer (FRP) reinforcements. Most studies on cracking phenomena of FRP-strengthened RC structures are directed to empirical corrections of crack-spacing formula given by design norms. Contrary to the design norms, a crack model presented in this paper is based on fracture mechanics of solids and is applied for direct calculation of flexural crack parameters. At the ultimate stage of crack propagation, the load-carrying capacity of the element is achieved; therefore, it is assumed that the load-carrying capacity can be estimated according to the ultimate crack depth (directly measuring concrete’s compressive zone height). An experimental program is presented to verify the accuracy of the proposed model, taking into account anchorage and initial strain effects. The proposed analytical crack model can be used for more precise predictions of flexural crack propagation and load-carrying capacity.

Numerical Analysis on the Load-Carrying Capacity for the FRP Reinforced Four-Point Bending Concrete Beam

2011 ◽  
Vol 287-290 ◽  
pp. 1130-1134
Author(s):  
Hong Chang Qu ◽  
Chang Qing Wu ◽  
Ling Ling Chen
Keyword(s):  
Finite Element ◽  
Carrying Capacity ◽  
Failure Modes ◽  
Load Carrying Capacity ◽  
Rc Beams ◽  
Cracking Behavior ◽  
Four Point Bending ◽  
Reinforced Polymer ◽  
Load Carrying ◽  
Different Types

In this paper, different types of debonding failure modes are described. Study of concrete cracking behavior and interfacial debonding fracture in fiber reinforced polymer (FRP)-strengthened concrete beams are carried out. A finite element analysis is performed to investigate the different types of debonding propagation along FRP–concrete interface and crack distribution in concrete. The proposed FE, denoted as FRP–FB (force-based) beam, is used to predict the load-carrying capacity and the applied load-midspan deflection response of RC beams subjected to four-point bending loading. Numerical simulations and experimental measurements are compared based on numerous tests available in the literatures and published by different authors. The numerically simulated responses agree remarkably well with the corresponding experimental results. It demonstrates that the proposed two-dimensional frame finite element (FE) is able to accurately estimate the load-carrying capacity of reinforced concrete (RC) beams flexurally strengthened with externally bonded fibre reinforced polymer (FRP) strips and plates.

Sign in / Sign up

Export Citation Format

Share Document