scholarly journals Evaluation of Aloe Vera Coated Polylactic Acid Scaffolds for Bone Tissue Engineering

2020 ◽  
Vol 10 (7) ◽  
pp. 2576
Author(s):  
Ricardo Donate ◽  
María Elena Alemán-Domínguez ◽  
Mario Monzón ◽  
Jianshu Yu ◽  
Francisco Rodríguez-Esparragón ◽  
...  
Keyword(s):  
Bone Tissue ◽  
Polylactic Acid ◽  
Photoelectron Spectroscopy ◽  
Aloe Vera ◽  
Extracellular Proteins ◽  
Bone Tissue Regeneration ◽  
Surrounding Tissue ◽  
Water Contact

3D-printed polylactic acid (PLA) scaffolds have been demonstrated as being a promising tool for the development of tissue-engineered replacements of bone. However, this material lacks a suitable surface chemistry to efficiently interact with extracellular proteins and, consequently, to integrate into the surrounding tissue when implanted in vivo. In this study, aloe vera coatings have been proposed as a strategy to improve the bioaffinity of this type of structures. Aloe vera coatings were applied at three different values of pH (3, 4 and 5), after treating the surface of the PLA scaffolds with oxygen plasma. The surface modification of the material has been assessed through X-ray photoelectron spectroscopy (XPS) analysis and water contact angle measurements. In addition, the evaluation of the enzymatic degradation of the structures showed that the pH of the aloe vera extracts used as coating influences the degradation rate of the PLA-based scaffolds. Finally, the cell metabolic activity of an in vitro culture of human fetal osteoblastic cells on the samples revealed an improvement of this parameter on aloe vera coated samples, especially for those treated at pH 3. Hence, these structures showed potential for being applied for bone tissue regeneration.

scholarly journals Fatty acid is a potential agent for bone tissue induction: In vitro and in vivo approach

2017 ◽  
Vol 242 (18) ◽  
pp. 1765-1771 ◽  
Author(s):  
Guinea BC Cardoso ◽  
Erivelto Chacon ◽  
Priscila GL Chacon ◽  
Pedro Bordeaux-Rego ◽  
Adriana SS Duarte ◽  
...  
Keyword(s):  
Stem Cells ◽  
Oleic Acid ◽  
Fatty Acid ◽  
Bone Tissue ◽  
In Vivo Studies ◽  
Surrounding Tissue ◽  
Bone Induction ◽  
Acid Addition

Our hypothesis was to investigate the fatty acid potential as a bone induction factor. In vitro and in vivo studies were performed to evaluate this approach. Oleic acid was used in a 0.5 wt.% concentration. Polycaprolactone was used as the polymeric matrix by combining solvent-casting and particulate-leaching techniques, with a final porosity of 70 wt.%, investigated by SEM images. Contact angle measurements were produced to investigate the influence of oleic acid on polycaprolactone chains. Cell culture was performed using adipocyte-derived stem cells to evaluate biocompatibility and bioactivity properties. In addition, in vivo studies were performed to evaluate the induction potential of oleic acid addition. Adipocyte-derived stem cells were used to provide differentiation after 21 days of culture. Likewise, information were obtained with in vivo data and cellular invagination was observed on both scaffolds (polycaprolactone and polycaprolactone /oleic acid); interestingly, the scaffold with oleic acid addition demonstrated that cellular migrations are not related to the surrounding tissue, indicating bioactive potential. Our hypothesis is that fatty acid may be used as a potential induction factor for bone tissue engineering. The study’s findings indicate oleic acid as a possible agent for bone induction, according to data on cell differentiation, proliferation, and migration. Impact statement The biomaterial combined in this study on bone regeneration is innovative and shows promising results in the treatment of bone lesions. Polycaprolactone (PCL) and oleic acid have been studied separately. In this research, we combined biomaterials to assess the stimulus and the speed of bone healing.

scholarly journals Surface-Modified Poly(l-lactide-co-glycolide) Scaffolds for the Treatment of Osteochondral Critical Size Defects—In Vivo Studies on Rabbits

2020 ◽  
Vol 21 (20) ◽  
pp. 7541
Author(s):  
Małgorzata Krok-Borkowicz ◽  
Katarzyna Reczyńska ◽  
Łucja Rumian ◽  
Elżbieta Menaszek ◽  
Maciej Orzelski ◽  
...  
Keyword(s):  
Bone Tissue ◽  
Tissue Regeneration ◽  
Photoelectron Spectroscopy ◽  
Sessile Drop ◽  
Bone Tissue Regeneration ◽  
In Vivo Studies ◽  
In Vivo Model ◽  
Type I ◽  
X Ray

Poly(l-lactide-co-glycolide) (PLGA) porous scaffolds were modified with collagen type I (PLGA/coll) or hydroxyapatite (PLGA/HAp) and implanted in rabbits osteochondral defects to check their biocompatibility and bone tissue regeneration potential. The scaffolds were fabricated using solvent casting/particulate leaching method. Their total porosity was 85% and the pore size was in the range of 250–320 µm. The physico-chemical properties of the scaffolds were evaluated using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), X-ray diffractometry (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), sessile drop, and compression tests. Three types of the scaffolds (unmodified PLGA, PLGA/coll, and PLGA/HAp) were implanted into the defects created in New Zealand rabbit femoral trochlears; empty defect acted as control. Samples were extracted after 1, 4, 12, and 26 weeks from the implantation, evaluated using micro-computed tomography (µCT), and stained by Masson–Goldner and hematoxylin-eosin. The results showed that the proposed method is suitable for fabrication of highly porous PLGA scaffolds. Effective deposition of both coll and HAp was confirmed on all surfaces of the pores through the entire scaffold volume. In the in vivo model, PLGA and PLGA/HAp scaffolds enhanced tissue ingrowth as shown by histological and morphometric analyses. Bone formation was the highest for PLGA/HAp scaffolds as evidenced by µCT. Neo-tissue formation in the defect site was well correlated with degradation kinetics of the scaffold material. Interestingly, around PLGA/coll extensive inflammation and inhibited tissue healing were detected, presumably due to immunological response of the host towards collagen of bovine origin. To summarize, PLGA scaffolds modified with HAp are the most promising materials for bone tissue regeneration.

Poly(glycerol sebacate)-modified polylactic acid scaffolds with improved hydrophilicity, mechanical strength and bioactivity for bone tissue regeneration

RSC Advances ◽  
2015 ◽  
Vol 5 (97) ◽  
pp. 79703-79714 ◽  
Author(s):  
Hengsong Shi ◽  
Qi Gan ◽  
Xiaowei Liu ◽  
Yifan Ma ◽  
Jun Hu ◽  
...  
Keyword(s):  
Mechanical Strength ◽  
Bone Tissue ◽  
Polylactic Acid ◽  
Tissue Regeneration ◽  
Biomedical Engineering ◽  
Bone Tissue Regeneration ◽  
Engineering Applications

Polylactic acid (PLA) has been extensively researched in biomedical engineering applications due to its superior mechanical strength and biocompatibility in vivo.

scholarly journals Cellularizing hydrogel-based scaffolds to repair bone tissue: How to create a physiologically relevant micro-environment?

2017 ◽  
Vol 8 ◽  
pp. 204173141771207 ◽  
Author(s):  
Mathieu Maisani ◽  
Daniele Pezzoli ◽  
Olivier Chassande ◽  
Diego Mantovani
Keyword(s):  
Bone Regeneration ◽  
Bone Tissue ◽  
Bone Repair ◽  
Critical Issue ◽  
Bone Defects ◽  
Bone Tissue Regeneration ◽  
Differentiation Potential ◽  
Promising Alternative

Tissue engineering is a promising alternative to autografts or allografts for the regeneration of large bone defects. Cell-free biomaterials with different degrees of sophistication can be used for several therapeutic indications, to stimulate bone repair by the host tissue. However, when osteoprogenitors are not available in the damaged tissue, exogenous cells with an osteoblast differentiation potential must be provided. These cells should have the capacity to colonize the defect and to participate in the building of new bone tissue. To achieve this goal, cells must survive, remain in the defect site, eventually proliferate, and differentiate into mature osteoblasts. A critical issue for these engrafted cells is to be fed by oxygen and nutrients: the transient absence of a vascular network upon implantation is a major challenge for cells to survive in the site of implantation, and different strategies can be followed to promote cell survival under poor oxygen and nutrient supply and to promote rapid vascularization of the defect area. These strategies involve the use of scaffolds designed to create the appropriate micro-environment for cells to survive, proliferate, and differentiate in vitro and in vivo. Hydrogels are an eclectic class of materials that can be easily cellularized and provide effective, minimally invasive approaches to fill bone defects and favor bone tissue regeneration. Furthermore, by playing on their composition and processing, it is possible to obtain biocompatible systems with adequate chemical, biological, and mechanical properties. However, only a good combination of scaffold and cells, possibly with the aid of incorporated growth factors, can lead to successful results in bone regeneration. This review presents the strategies used to design cellularized hydrogel-based systems for bone regeneration, identifying the key parameters of the many different micro-environments created within hydrogels.

Enhancing in vitro bioactivity and in vivo osteogenesis of organic–inorganic nanofibrous biocomposites with novel bioceramics

2014 ◽  
Vol 2 (37) ◽  
pp. 6293-6305 ◽  
Author(s):  
Tao Liu ◽  
Xinbo Ding ◽  
Dongzhi Lai ◽  
Yongwei Chen ◽  
Ridong Zhang ◽  
...  
Keyword(s):  
Bone Tissue ◽  
Tissue Regeneration ◽  
Biological Properties ◽  
Bone Tissue Regeneration ◽  
In Vitro Bioactivity ◽  
Physicochemical And Biological Properties

MGHA-introduced, an electrospun SF-based composite can exhibit improved physicochemical and biological properties to stimulate bone tissue regeneration and repair.

Scaffolds containing chitosan, gelatin and graphene oxide for bone tissue regeneration in vitro and in vivo

2017 ◽  
Vol 104 ◽  
pp. 1975-1985 ◽  
Author(s):  
S. Saravanan ◽  
Anjali Chawla ◽  
M. Vairamani ◽  
T.P. Sastry ◽  
K.S. Subramanian ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Bone Tissue ◽  
Tissue Regeneration ◽  
Bone Tissue Regeneration ◽  
Regeneration In Vitro

scholarly journals Conducting PEEK Nanocomposites with Electrophoretically Deposited Bioactive Coating for Bone Tissue Regeneration and Multi-Modal Therapeutic Applications

2020 ◽  
Author(s):  
Miaomiao He ◽  
Ce zhu ◽  
Huan Xu ◽  
dan Sun ◽  
Chen Chen ◽  
...  
Keyword(s):  
Bone Tissue ◽  
Tissue Regeneration ◽  
Bone Repair ◽  
Graphene Nanosheets ◽  
Biomechanical Properties ◽  
Bone Diseases ◽  
Bone Tissue Regeneration ◽  
Order Of Magnitude

The use of polyetheretherketone (PEEK) has grown exponentially in the biomedical field in recent decades due to its outstanding biomechanical properties. However, its lack of bioactivity/osteointegration remains an unresolved issue towards its wide use in orthopedic applications. In this work, graphene nanosheets have been incorporated into PEEK to obtain multifunctional nanocomposites. Due to the formation of electrical percolation network and the π-π* conjugation between graphene and PEEK, the resulting composites have achieved twelve order of magnitude enhancement in its electrical conductivity, and have enabled electrophoretic deposition of bioactive/anti-bacterial coating consisting of stearyltrimethylammonium chloride (STAC) modified hydroxyapatite (HA). The coated composite implant showed significant boosting of BMSC cell proliferation in vitro. In addition, the strong photothermal conversion effect of the graphene nanofillers have enabled laser induced heating of our nanocomposite implants, where the temperature of the implant can reach 45 oC in 150 s. The unique multi-functionality of our composite implant has also been demonstrated for photothermal applications such as enhancing bacterial (E. coli and S. aureus) eradication and tumor cell (MG63) inhibition, as well as bone tissue regeneration in vivo. The results suggest the strong potential of our multi-functional implant in bone repair applications as well as multi-modal therapy of challenging bone diseases such as osteosarcoma and osteomyelitis

scholarly journals Natural and Synthetic Polymers for Bone Scaffolds Optimization

Polymers ◽  
2020 ◽  
Vol 12 (4) ◽  
pp. 905 ◽  
Author(s):  
Francesca Donnaloja ◽  
Emanuela Jacchetti ◽  
Monica Soncini ◽  
Manuela T. Raimondi
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue ◽  
Bone Cells ◽  
The Body ◽  
Bone Tissue Regeneration ◽  
In Vivo Models ◽  
Polymeric Scaffold ◽  
Technology Improvement

Bone tissue is the structural component of the body, which allows locomotion, protects vital internal organs, and provides the maintenance of mineral homeostasis. Several bone-related pathologies generate critical-size bone defects that our organism is not able to heal spontaneously and require a therapeutic action. Conventional therapies span from pharmacological to interventional methodologies, all of them characterized by several drawbacks. To circumvent these effects, tissue engineering and regenerative medicine are innovative and promising approaches that exploit the capability of bone progenitors, especially mesenchymal stem cells, to differentiate into functional bone cells. So far, several materials have been tested in order to guarantee the specific requirements for bone tissue regeneration, ranging from the material biocompatibility to the ideal 3D bone-like architectural structure. In this review, we analyse the state-of-the-art of the most widespread polymeric scaffold materials and their application in in vitro and in vivo models, in order to evaluate their usability in the field of bone tissue engineering. Here, we will present several adopted strategies in scaffold production, from the different combination of materials, to chemical factor inclusion, embedding of cells, and manufacturing technology improvement.

scholarly journals 3D bioactive cell-free-scaffolds for in-vitro/in-vivo capture and directed osteoinduction of stem cells for bone tissue regeneration

2021 ◽  
Vol 6 (11) ◽  
pp. 4083-4095
Author(s):  
Mamatali Rahman ◽  
Xue-Liang Peng ◽  
Xiao-Hong Zhao ◽  
Hai-Lun Gong ◽  
Xiao-Dan Sun ◽  
...  
Keyword(s):  
Stem Cells ◽  
Bone Tissue ◽  
Tissue Regeneration ◽  
Bone Tissue Regeneration
Sign in / Sign up

Export Citation Format

Share Document