scholarly journals Thermographic Analysis of the Metacarpal and Metatarsal Areas in Jumping Sport Horses and Leisure Horses in Response to Warm-Up Duration

Animals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 2022
Author(s):  
Iwona Janczarek ◽  
Witold Kędzierski ◽  
Ewelina Tkaczyk ◽  
Beata Kaczmarek ◽  
Jarosław Łuszczyński ◽  
...  
Keyword(s):  
Surface Temperature ◽  
Elevated Temperatures ◽  
Recovery Period ◽  
Dorsal Surface ◽  
Thermal Imager ◽  
Warm Up ◽  
Plantar Surface ◽  
Thermographic Analysis ◽  
The Impact ◽  
Recovery Temperature

This study aimed to assess the impact of various types of warm-up on the metacarpal and metatarsal surface temperature in jumping sport horses in comparison to leisure horses, which work usually less intensively. Six clinically healthy sport geldings, contestants in showjumping competitions, and six geldings used for leisure riding were included in the study. The experiment was conducted for four consecutive days, during which the horses were warmed up by walking and trotting for various durations. Images were taken with a FLUKE Ti9 thermal imager to determine the resting, post-effort, and recovery temperature of the dorsal and plantar surface of the metacarpus and metatarsus of the four limbs. The obtained data were analysed with SmartView 4.1. software. The increase of measured rectal and surface temperatures was proportional to the warm-up duration. The surface temperature increase in the distal limb parts in jumping sport horses was greater than in horses used for leisure. The plantar surface was also warmer than the dorsal surface of the metacarpal/metatarsal areas, with a forelimb being warmer than a hind limb. Elevated temperatures after warm-up persist for 30 min in the recovery period, especially in jumping sport horses compared to leisure horses. Thus, the warming up effect is achieved earlier and lasts longer in heavily trained horses than in non-performance horses.

scholarly journals Experimental heatwaves negatively impact sperm quality in the zebra finch

2018 ◽  
Vol 285 (1871) ◽  
pp. 20172547 ◽  
Author(s):  
Laura L. Hurley ◽  
Callum S. McDiarmid ◽  
Christopher R. Friesen ◽  
Simon C. Griffith ◽  
Melissah Rowe
Keyword(s):  
Male Fertility ◽  
Elevated Temperatures ◽  
Sperm Quality ◽  
Recovery Period ◽  
Heat Exposure ◽  
Effect Of Temperature ◽  
Normal Morphology ◽  
Warming World ◽  
The Impact

For sexually reproducing species, functionally competent sperm are critical to reproduction. While high atmospheric temperatures are known to influence the timing of breeding, incubation and reproductive success in birds, the effect of temperature on sperm quality remains largely unexplored. Here, we experimentally investigated the impact of ecologically relevant extreme temperatures on cloacal temperature and sperm morphology and motility in zebra finches Taeniopygia guttata . We periodically sampled males exposed to 30°C or 40°C temperatures daily for 14 consecutive days. Following a 12-day (23°C) recovery period, birds were again exposed to heat, but under the alternate treatment (e.g. birds initially exposed to 40°C were exposed to 30°C). Elevated temperatures led to an increase in cloacal temperature and a reduction in the proportion of sperm with normal morphology; these effects were most notable under 40°C conditions, and were influenced by the duration of heat exposure and prior exposure to high temperature. Our findings highlight the potential role of temperature in determining male fertility in birds, and perhaps also in constraining the timing of avian breeding. Given the increased frequency of heatwaves in a warming world, our results suggest the need for further work on climatic influences on sperm quality and male fertility.

Impact of LULC Changes on LST in Rajshahi District of Bangladesh: A Remote Sensing Approach

2020 ◽  
Vol 3 (1) ◽  
pp. 11-23 ◽  
Author(s):  
Abdulla Al Kafy ◽  
Abdullah Al-Faisal ◽  
Mohammad Mahmudul Hasan ◽  
Md. Soumik Sikdar ◽  
Mohammad Hasib Hasan Khan ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Surface Temperature ◽  
Land Surface ◽  
Agricultural Land ◽  
Global Climate ◽  
Urban Expansion ◽  
Water Bodies ◽  
Landsat 8 ◽  
Lulc Changes ◽  
The Impact

Urbanization has been contributing more in global climate warming, with more than 50% of the population living in cities. Rapid population growth and change in land use / land cover (LULC) are closely linked. The transformation of LULC due to rapid urban expansion significantly affects the functions of biodiversity and ecosystems, as well as local and regional climates. Improper planning and uncontrolled management of LULC changes profoundly contribute to the rise of urban land surface temperature (LST). This study evaluates the impact of LULC changes on LST for 1997, 2007 and 2017 in the Rajshahi district (Bangladesh) using multi-temporal and multi-spectral Landsat 8 OLI and Landsat 5 TM satellite data sets. The analysis of LULC changes exposed a remarkable increase in the built-up areas and a significant decrease in the vegetation and agricultural land. The built-up area was increased almost double in last 20 years in the study area. The distribution of changes in LST shows that built-up areas recorded the highest temperature followed by bare land, vegetation and agricultural land and water bodies. The LULC-LST profiles also revealed the highest temperature in built-up areas and the lowest temperature in water bodies. In the last 20 years, LST was increased about 13ºC. The study demonstrates decrease in vegetation cover and increase in non-evaporating surfaces with significantly increases the surface temperature in the study area. Remote-sensing techniques were found one of the suitable techniques for rapid analysis of urban expansions and to identify the impact of urbanization on LST.

scholarly journals Interannual Variability and Trends in Sea Surface Temperature, Lower and Middle Atmosphere Temperature at Different Latitudes for 1980–2019

Atmosphere ◽  
2021 ◽  
Vol 12 (4) ◽  
pp. 454
Author(s):  
Andrew R. Jakovlev ◽  
Sergei P. Smyshlyaev ◽  
Vener Y. Galin
Keyword(s):  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Lower Stratosphere ◽  
Middle Atmosphere ◽  
Southern Oscillation ◽  
Lower Troposphere ◽  
Reanalysis Data ◽  
Sea Surface ◽  
The Arctic ◽  
The Impact

The influence of sea-surface temperature (SST) on the lower troposphere and lower stratosphere temperature in the tropical, middle, and polar latitudes is studied for 1980–2019 based on the MERRA2, ERA5, and Met Office reanalysis data, and numerical modeling with a chemistry-climate model (CCM) of the lower and middle atmosphere. The variability of SST is analyzed according to Met Office and ERA5 data, while the variability of atmospheric temperature is investigated according to MERRA2 and ERA5 data. Analysis of sea surface temperature trends based on reanalysis data revealed that a significant positive SST trend of about 0.1 degrees per decade is observed over the globe. In the middle latitudes of the Northern Hemisphere, the trend (about 0.2 degrees per decade) is 2 times higher than the global average, and 5 times higher than in the Southern Hemisphere (about 0.04 degrees per decade). At polar latitudes, opposite SST trends are observed in the Arctic (positive) and Antarctic (negative). The impact of the El Niño Southern Oscillation phenomenon on the temperature of the lower and middle atmosphere in the middle and polar latitudes of the Northern and Southern Hemispheres is discussed. To assess the relative influence of SST, CO2, and other greenhouse gases’ variability on the temperature of the lower troposphere and lower stratosphere, numerical calculations with a CCM were performed for several scenarios of accounting for the SST and carbon dioxide variability. The results of numerical experiments with a CCM demonstrated that the influence of SST prevails in the troposphere, while for the stratosphere, an increase in the CO2 content plays the most important role.

scholarly journals Impact of Incorporating NIR Reflective Pigments in Finishing Coatings of ETICS

2021 ◽  
Vol 6 (6) ◽  
pp. 79
Author(s):  
Nuno M. M. Ramos ◽  
Joana Maia ◽  
Andrea R. Souza ◽  
Ricardo M. S. F. Almeida ◽  
Luís Silva
Keyword(s):  
Surface Layer ◽  
Surface Temperature ◽  
Near Infrared ◽  
Building Performance ◽  
Colour Difference ◽  
Colour Perception ◽  
Composite Systems ◽  
Solar Reflectance ◽  
Building Cooling ◽  
The Impact

Near-infrared (NIR) reflective materials are being developed for mitigating building cooling needs. Their use contributes to broadening the range of colours, responding to the urban aesthetic demand without compromising the building performance. Despite the increase in NIR reflective pigments investigation, there is still a knowledge gap in their applicability, impact, and durability in multilayer finishing coatings of External Thermal Insulation Composite Systems (ETICS). Hence, the main goal of this work consists of evaluating the impact of incorporating NIR reflective pigments (NRP) in the solar reflectance of the surface layer of ETICS, without affecting the colour perception, as well as their influence on the colour durability and surface temperature. As such, colour, solar reflectance, and surface temperature were monitored for 2 years in dark-coloured specimens of ETICS, with and without NRP and a primer layer. It was confirmed that the main contribution of NRP is the increase of solar reflectance and, consequently, the decrease in surface temperature, especially for high exterior temperatures (around 30 ºC). Moreover, these pigments highly increase the NIR reflectance without affecting the visible colour. In addition, they contribute to maintaining the colour characteristics. The application of primer increased the surface temperature, especially for higher exterior temperatures. However, it contributes to a lower colour difference and solar reflectance variation, which is an important achievement for durability purposes.

scholarly journals Fire Resistance Behaviour of Geopolymer Concrete:An Overview

Buildings ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 82
Author(s):  
Salmabanu Luhar ◽  
Demetris Nicolaides ◽  
Ismail Luhar
Keyword(s):  
Compressive Strength ◽  
Thermal Resistance ◽  
Building Materials ◽  
Elevated Temperatures ◽  
Construction Materials ◽  
Flexural Behavior ◽  
Thermal Shrinkage ◽  
Physico Chemical ◽  
The Impact ◽  
Loss Of Strength

Even though, an innovative inorganic family of geopolymer concretes are eye-catching potential building materials, it is quite essential to comprehend the fire and thermal resistance of these structural materials at a very high temperature and also when experiencing fire with a view to make certain not only the safety and security of lives and properties but also to establish them as more sustainable edifice materials for future. The experimental and field observations of degree of cracking, spalling and loss of strength within the geopolymer concretes subsequent to exposure at elevated temperature and incidences of occurrences of disastrous fires extend an indication of their resistance against such severely catastrophic conditions. The impact of heat and fire on mechanical attributes viz., mechanical-compressive strength, flexural behavior, elastic modulus; durability—thermal shrinkage; chemical stability; the impact of thermal creep on compressive strength; and microstructure properties—XRD, FTIR, NMR, SEM as well as physico-chemical modifications of geopolymer composites subsequent to their exposures at elevated temperatures is reviewed in depth. The present scientific state-of-the-art review manuscript aimed to assess the fire and thermal resistance of geopolymer concrete along with its thermo-chemistry at a towering temperature in order to introduce this novel, most modern, user and eco-benign construction materials as potentially promising, sustainable, durable, thermal and fire-resistant building materials promoting their optimal and apposite applications for construction and infrastructure industries.

scholarly journals A Novel Quantitative Prediction Approach for Pungency Level of Chinese Liquor (Baijiu) Based on Infrared Thermal Imager

Foods ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 1107
Author(s):  
Yingxia He ◽  
Shuang Chen ◽  
Ke Tang ◽  
Yan Xu ◽  
Xiaowei Yu
Keyword(s):  
Aqueous Solution ◽  
Surface Temperature ◽  
Sensory Analysis ◽  
Alcoholic Beverages ◽  
Quantitative Prediction ◽  
Thermal Imager ◽  
Surface Temperatures ◽  
Tongue Surface ◽  
Ethanol Aqueous Solution ◽  
Prediction Approach

Pungency is a crucial sensory feature that influences consumers’ appreciation and preferences toward alcoholic beverages. However, the quantitation of pungency is challenging to achieve using sensory analysis because of persistence, accumulation, and desensitization to the pungency perception. This study aimed to design a novel pungency evaluation method based on the measurement of tongue surface temperature. An infrared thermal (IRT) imager technique for measuring tongue surface temperature was established. To validate its feasibility, the IRT technique was used to measure tongue surface temperatures after the tongue was stimulated by (1) water and Baijiu, (2) different concentrations of ethanol aqueous solution (10, 20, 30, 40, and 50%, v/v), (3) ethanol aqueous solution and Baijiu samples with the same ethanol content, and (4) 26 Baijiu samples with different pungency level. For all cases, tongue surface temperatures showed large differences as a result of the different stimulation. The results showed that the tongue surface temperature correlated with the pungency intensity obtained by the sensory analysis. The relationship between tongue surface temperature and pungency intensity was established by multiple linear regression analysis. The IRT technique was able to be a useful support tool to quantitatively predict the pungency of alcoholic beverages, based on the measurement of tongue surface temperature.

scholarly journals The impact of topical lidocaine and timing of LMA removal on the incidence of airway events during the recovery period in children: a randomized controlled trial

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Ruiqiang Sun ◽  
Xiaoyun Bao ◽  
Xuesong Gao ◽  
Tong Li ◽  
Quan Wang ◽  
...  
Keyword(s):  
Randomized Controlled Trial ◽  
Controlled Trial ◽  
Recovery Period ◽  
Awake State ◽  
Randomized Controlled ◽  
Laryngeal Spasm ◽  
Topical Lidocaine ◽  
Lubricant Application ◽  
Pacu Stay ◽  
The Impact

Abstract Background The timing of laryngeal mask airway (LMA) removal remains undefined. This study aimed to assess the optimal timing for LMA removal and whether topical anesthesia with lidocaine could reduce airway adverse events. Methods This randomized controlled trial assessed one-to-six-year-old children with ASA I-II scheduled for squint correction surgery under general anesthesia. The children were randomized into the LA (lidocaine cream smeared to the cuff of the LMA before insertion, with mask removal in the awake state), LD (lidocaine application and LMA removal under deep anesthesia), NLA (hydrosoluble lubricant application and LMA removal in the awake state) and NLD (hydrosoluble lubricant application and LMA removal in deep anesthesia) groups. The primary endpoint was a composite of irritating cough, laryngeal spasm, SpO2 < 96%, and glossocoma in the recovery period in the PACU. The secondary endpoints included the incidence of pharyngalgia and hoarseness within 24 h after the operation, duration of PACU stay, and incidence of agitation in the recovery period. The assessor was unblinded. Results Each group included 98 children. The overall incidence of adverse airway events was significantly lower in the LA group (9.4%) compared with the LD (23.7%), NLA (32.6%), and NLD (28.7%) groups (P=0.001). Cough and laryngeal spasm rates were significantly higher in the NLA group (20.0 and 9.5%, respectively) than the LA (5.2 and 0%, respectively), LD (4.1 and 1.0%, respectively), and NLD (9.6 and 2.1%, respectively) groups (P=0.001). Glossocoma incidence was significantly lower in the LA and NLA groups (0%) than in the LD (19.6%) and NLD (20.2%) groups (P< 0.001). At 24 h post-operation, pharyngalgia incidence was significantly higher in the NLA group (15.8%) than the LA (3.1%), LD (1.0%), and NLD (3.2%) groups (P< 0.001). Conclusions LMA removal in the awake state after topical lidocaine anesthesia reduces the incidence of postoperative airway events. Trial registration ChiCTR, ChiCTR-IPR-17012347. Registered August 12, 2017.

scholarly journals Seasonal Variations of Daytime Land Surface Temperature and Their Underlying Drivers over Wuhan, China

2021 ◽  
Vol 13 (2) ◽  
pp. 323
Author(s):  
Liang Chen ◽  
Xuelei Wang ◽  
Xiaobin Cai ◽  
Chao Yang ◽  
Xiaorong Lu
Keyword(s):  
Surface Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Vegetation Index ◽  
Normalized Difference Vegetation Index ◽  
Maximum Temperature ◽  
Maximum Temperature Difference ◽  
Rapid Urbanization ◽  
The Impact ◽  
The City

Rapid urbanization greatly alters land surface vegetation cover and heat distribution, leading to the development of the urban heat island (UHI) effect and seriously affecting the healthy development of cities and the comfort of living. As an indicator of urban health and livability, monitoring the distribution of land surface temperature (LST) and discovering its main impacting factors are receiving increasing attention in the effort to develop cities more sustainably. In this study, we analyzed the spatial distribution patterns of LST of the city of Wuhan, China, from 2013 to 2019. We detected hot and cold poles in four seasons through clustering and outlier analysis (based on Anselin local Moran’s I) of LST. Furthermore, we introduced the geographical detector model to quantify the impact of six physical and socio-economic factors, including the digital elevation model (DEM), index-based built-up index (IBI), modified normalized difference water index (MNDWI), normalized difference vegetation index (NDVI), population, and Gross Domestic Product (GDP) on the LST distribution of Wuhan. Finally, to identify the influence of land cover on temperature, the LST of croplands, woodlands, grasslands, and built-up areas was analyzed. The results showed that low temperatures are mainly distributed over water and woodland areas, followed by grasslands; high temperatures are mainly concentrated over built-up areas. The maximum temperature difference between land covers occurs in spring and summer, while this difference can be ignored in winter. MNDWI, IBI, and NDVI are the key driving factors of the thermal values change in Wuhan, especially of their interaction. We found that the temperature of water area and urban green space (woodlands and grasslands) tends to be 5.4 °C and 2.6 °C lower than that of built-up areas. Our research results can contribute to the urban planning and urban greening of Wuhan and promote the healthy and sustainable development of the city.

scholarly journals A Link between the Hiatus in Global Warming and North American Drought

2015 ◽  
Vol 28 (9) ◽  
pp. 3834-3845 ◽  
Author(s):  
Thomas L. Delworth ◽  
Fanrong Zeng ◽  
Anthony Rosati ◽  
Gabriel A. Vecchi ◽  
Andrew T. Wittenberg
Keyword(s):  
Global Warming ◽  
North America ◽  
Surface Temperature ◽  
North American ◽  
Radiative Forcing ◽  
Tropical Pacific ◽  
Global Warming Hiatus ◽  
Warming Hiatus ◽  
The Impact ◽  
The Tropical Pacific

Abstract Portions of western North America have experienced prolonged drought over the last decade. This drought has occurred at the same time as the global warming hiatus—a decadal period with little increase in global mean surface temperature. Climate models and observational analyses are used to clarify the dual role of recent tropical Pacific changes in driving both the global warming hiatus and North American drought. When observed tropical Pacific wind stress anomalies are inserted into coupled models, the simulations produce persistent negative sea surface temperature anomalies in the eastern tropical Pacific, a hiatus in global warming, and drought over North America driven by SST-induced atmospheric circulation anomalies. In the simulations herein the tropical wind anomalies account for 92% of the simulated North American drought during the recent decade, with 8% from anthropogenic radiative forcing changes. This suggests that anthropogenic radiative forcing is not the dominant driver of the current drought, unless the wind changes themselves are driven by anthropogenic radiative forcing. The anomalous tropical winds could also originate from coupled interactions in the tropical Pacific or from forcing outside the tropical Pacific. The model experiments suggest that if the tropical winds were to return to climatological conditions, then the recent tendency toward North American drought would diminish. Alternatively, if the anomalous tropical winds were to persist, then the impact on North American drought would continue; however, the impact of the enhanced Pacific easterlies on global temperature diminishes after a decade or two due to a surface reemergence of warmer water that was initially subducted into the ocean interior.

Thermal Modeling of a Railroad Tapered-Roller Bearing Using Finite Element Analysis

2012 ◽  
Vol 4 (3) ◽  
Author(s):  
Constantine M. Tarawneh ◽  
Arturo A. Fuentes ◽  
Javier A. Kypuros ◽  
Lariza A. Navarro ◽  
Andrei G. Vaipan ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Surface Temperature ◽  
Elevated Temperatures ◽  
Roller Bearing ◽  
Fe Model ◽  
Element Analysis ◽  
Tapered Roller Bearing ◽  
Outer Race ◽  
Railroad Industry

In the railroad industry, distressed bearings in service are primarily identified using wayside hot-box detectors (HBDs). Current technology has expanded the role of these detectors to monitor bearings that appear to “warm trend” relative to the average temperatures of the remainder of bearings on the train. Several bearings set-out for trending and classified as nonverified, meaning no discernible damage, revealed that a common feature was discoloration of rollers within a cone (inner race) assembly. Subsequent laboratory experiments were performed to determine a minimum temperature and environment necessary to reproduce these discolorations and concluded that the discoloration is most likely due to roller temperatures greater than 232 °C (450 °F) for periods of at least 4 h. The latter finding sparked several discussions and speculations in the railroad industry as to whether it is possible to have rollers reaching such elevated temperatures without heating the bearing cup (outer race) to a temperature significant enough to trigger the HBDs. With this motivation, and based on previous experimental and analytical work, a thermal finite element analysis (FEA) of a railroad bearing pressed onto an axle was conducted using ALGOR 20.3™. The finite element (FE) model was used to simulate different heating scenarios with the purpose of obtaining the temperatures of internal components of the bearing assembly, as well as the heat generation rates and the bearing cup surface temperature. The results showed that, even though some rollers can reach unsafe operating temperatures, the bearing cup surface temperature does not exhibit levels that would trigger HBD alarms.

Sign in / Sign up

Export Citation Format

Share Document