scholarly journals Can Plants Move like Animals? A Three-Dimensional Stereovision Analysis of Movement in Plants

Animals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1854
Author(s):  
Valentina Simonetti ◽  
Maria Bulgheroni ◽  
Silvia Guerra ◽  
Alessandro Peressotti ◽  
Francesca Peressotti ◽  
...  

In this article we adapt a methodology customarily used to investigate movement in animals to study the movement of plants. The targeted movement is circumnutation, a helical organ movement widespread among plants. It is variable due to a different magnitude of the trajectory (amplitude) exhibited by the organ tip, duration of one cycle (period), circular, elliptical, pendulum-like or irregular shape and the clockwise and counterclockwise direction of rotation. The acquisition setup consists of two cameras used to obtain a stereoscopic vision for each plant. Cameras switch to infrared recording mode for low light level conditions, allowing continuous motion acquisition during the night. A dedicated software enables semi-automatic tracking of key points of the plant and reconstructs the 3D trajectory of each point along the whole movement. Three-dimensional trajectories for different points undergo a specific processing to compute those features suitable to describe circumnutation (e.g., maximum speed, circumnutation center, circumnutation length, etc.). By applying our method to the approach-to-grasp movement exhibited by climbing plants (Pisum sativum L.) it appears clear that the plants scale movement kinematics according to the features of the support in ways that are adaptive, flexible, anticipatory and goal-directed, reminiscent of how animals would act.

Author(s):  
W. Lin ◽  
J. Gregorio ◽  
T.J. Holmes ◽  
D. H. Szarowski ◽  
J.N. Turner

A low-light level video microscope with long working distance objective lenses has been built as part of our integrated three-dimensional (3-D) light microscopy workstation (Fig. 1). It allows the observation of living specimens under sufficiently low light illumination that no significant photobleaching or alternation of specimen physiology is produced. The improved image quality, depth discrimination and 3-D reconstruction provides a versatile intermediate resolution system that replaces the commonly used dissection microscope for initial image recording and positioning of microelectrodes for neurobiology. A 3-D image is displayed on-line to guide the execution of complex experiments. An image composed of 40 optical sections requires 7 minutes to process and display a stereo pair.The low-light level video microscope utilizes long working distance objective lenses from Mitutoyo (10X, 0.28NA, 37 mm working distance; 20X, 0.42NA, 20 mm working distance; 50X, 0.42NA, 20 mm working distance). They provide enough working distance to allow the placement of microelectrodes in the specimen.


2012 ◽  
Vol 460 ◽  
pp. 30-34
Author(s):  
Peng Xu ◽  
Yuan Men Zhou

The paper introduces a kind of detection method of face pose based on stereoscopic vision technology, approximately divides head’s deflexion into three plane rotations. By calculating the deflexion angle of three directions, you can determine the face’s pose. This method obtains face images by the left and right video channels, first analyses the similarity of double channels’ images to obtain three-dimensional information of face features’ key points. Then calculates three deflexion angles according to these information, therefore can correspondingly adjust and deform the original image to get standard frontal face image, and provides correction image for the latter face recognition. By this method the impact of pose change to face recognition can be reduced obviously in the earlier stage, so the system’s overall recognition accuracy rate is enhanced effectively.


2005 ◽  
Vol 869 ◽  
Author(s):  
Juergen Sterzel ◽  
Frank Blecher

AbstractThanks to its three-dimensional integration and the use of amorphous as well as crystalline silicon, the TFA technology is suitable for advanced image sensor applications. This paper describes the fundamentals of the properties: sensitivity, dark current, temporal and fixed-pattern noise of these TFA image sensors. It compares the different sensitivity definitions, especially current sensitivity and the charge conversion factor. Further, the dark current sources are pointed out, and their temperature behavior is described. By noise calculations, different pixel input stages are compared with regard to low light level detection.


Author(s):  
G.Y. Fan ◽  
J.M. Cowley

In recent developments, the ASU HB5 has been modified so that the timing, positioning, and scanning of the finely focused electron probe can be entirely controlled by a host computer. This made the asynchronized handshake possible between the HB5 STEM and the image processing system which consists of host computer (PDP 11/34), DeAnza image processor (IP 5000) which is interfaced with a low-light level TV camera, array processor (AP 400) and various peripheral devices. This greatly facilitates the pattern recognition technique initiated by Monosmith and Cowley. Software called NANHB5 is under development which, instead of employing a set of photo-diodes to detect strong spots on a TV screen, uses various software techniques including on-line fast Fourier transform (FFT) to recognize patterns of greater complexity, taking advantage of the sophistication of our image processing system and the flexibility of computer software.


2014 ◽  
Vol 556-562 ◽  
pp. 5017-5020
Author(s):  
Ting Ting Wang

Three-dimensional stereo vision technology has the capability of overcoming drawbacks influencing by light, posture and occluder. A novel image processing method is proposed based on three-dimensional stereoscopic vision, which optimizes model on the basis of camera binocular vision and in improvement of adding constraints to traditional model, moreover ensures accuracy of later location and recognition. To verify validity of the proposed method, firstly marking experiments are conducted to achieve fruit location, with the result of average error rate of 0.65%; and then centroid feature experiments are achieved with error from 5.77mm to 68.15mm and reference error rate from 1.44% to 5.68%, average error rate of 3.76% while the distance changes from 300mm to 1200mm. All these data of experiments demonstrate that proposed method meets the requirements of three-dimensional imageprocessing.


1998 ◽  
Author(s):  
Lianfa Bai ◽  
Qian Chen ◽  
Dekui Yin ◽  
Baomin Zhang

2016 ◽  
Author(s):  
Chao Liu ◽  
Xiao-hui Zhang ◽  
Qing-ping Hu ◽  
Yong-kang Chen

Sign in / Sign up

Export Citation Format

Share Document